2000AD/E

UNIWORLD series PNEUMATIC VALVES 07 2016

SINGLE SEAT TWO WAY CONTROL VALVES

PED 2014/68/UE / ATEX 2014/34/UE / MACHINERY DIRECTIVE 2006/42/CE

TYPE 2000 AD
Normally open – air closes
Face-to-face EN 558-1

DESCRIPTION
The “UNIWORLD” series type 2000 AD are equipped with EN
“straight-through” pattern bodies with EN flanges.
Modulating plug suitable for control of virtually all line media.
Compact construction assembled with multisprings pneumatic actuator
having 3-15 psi …6-30 psi standard control signals
On request can be equipped with a pneumatic or electro-pneumatic
pilot positioner.

SIZES : from DN 15 to DN 100 TECHNICAL CHARACTERISTICS OF PNEUMATIC ACTUATOR :

BODY CONNECTIONS : flanged EN 1092-1 PN16 PN40 • Actuator : diaphragm type
• Control signals : 3-15 psi …6-30 psi
MATERIALS OF BODY GROUP (1) : • Max air supply pressure : 35 psi (2,5 bar)
• Cast iron EN-GJL-250 UNI EN 1561 PN 16 • Ambient temperature : -20 ... +70 °C *see on request
AISI 316 st. st. trim - C40 nickel plated steel bonnet • Actuator casings material : Fe P11 carbon steel
• Carbon steel 1.0619 PN 16 … PN 40 • Diaphragm material : EPDM 70
AISI 316 st. st. trim - C40 nickel plated steel bonnet • Yoke material : EN-GJS500-7 spheroidal cast iron
• Stainless steel AISI 316 1.4408 PN 16 … PN 40 • Pneumatic connections : ISO 7 Rp – 1/8”
AISI 316 st. st. trim – AISI 316 st. st. bonnet
MAX WORKING CONDITIONS :
PLUG : • Max inlet pressure and temperature : see leaflet n° 101/VP
• EQP (DN15-50) EQV (DN65-100) = equal percentage class IV° • Valve sizing : see leaflet n° 100/VP
• PL (DN15-50) LV (DN65-100) = linear class IV° • Rangeability : see leaflet n° GRAFICI/I
• PT (DN15-50) VPT (DN65-100) = quick lift class IV°
ON REQUEST :
BONNET (2) : • PTFE/GR soft seal ≤190°C class VI°
• Standard : -5 to + 200 °C • PTFE soft seal ≤150°C class VI°
• Finned : > 200 °C • Lapping on seat and plug class V°
• Extended : below - 5 °C • Stellite (degree 6°) on seat and plug and guide bush
• Bellows sealed : for thermal oil or hazardous media with • Reduced bore (see below table)
(PN 16 - 25 - 40) standard safety gland arrangement • Pneumatic pilot positioner 3-15 psi…3-9 psi…9-15 psi
• Electro-pneumatic pilot positioner 4-20 mA...4-12 mA...12-20 mA
GLAND ARRANGEMENT (PACKING) (3) with safety “0-rings” : • Air filter regulator
• PTFE 100% for temperatures ≤150 °C • Proximity limit switches
• PTFE 85% + GRAPHITE 15% for temperatures ≤ 200 °C • 3-way solenoid valve
• PURE GRAPHITE 100% for temperatures from 200° to 400 °C • Lubrificator on finned bonnet for temperatures ≥ 250 °C
to be used with finned bonnet • Top-work manual handwheel
• ATEX 94/9/CE dedicated configuration according to the fluid
• Kit diaphragm and actuator seals certified for a.t. ≥ - 50 °C

CV = american unit (flowrate in USGPM Kv = metric unit (flowrate in m3/h

with 1 psi of differential pressure) with 1 bar of differential pressure)
PLUG DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100
Full bore Ø 1/2” Ø 3/4” Ø 1” Ø 1.1/4” Ø 1.1/2” Ø 2” Ø 2.1/2” Ø 3” Ø 4”
CV 3.4 6.6 10.8 17 23.8 50 70.2 87.9 118.5
EQP
KV 2.9 5.7 9.3 14.7 20.5 43 60.5 75.2 102.1
PL CV 3.4 6.6 11.2 17.6 23.9 51.2 72.7 89.3 123.8
KV 2.9 5.7 9.6 15.2 20.6 44 62.7 77 106.7
PT
CV 3.4 6.6 12.1 19 24 52.7 107.3 129.3 175.4
KV 2.9 5.7 10.4 16.4 20.7 45.3 92.5 111.5 151.2
Reduced bore * • • 1/2” 1/2” 3/4” 3/4” 1” 1” 1.1/4” 1.1/4” 1.1/2” 1.1/2” 2” 2” 2.1/2” 2.1/2” 3”

• DN 15-20 MFP 1/8” MFP 3/16” MFP 1/4” MFP 3/8” MFS1SG 1/4” MFS2SG 1/4” MFS1SG 3/8” MFS2SG 3/8”
CV 0.26 0.71 1.28 2.62 0.65 1.21 1.22 2.25
KV 0.22 0.61 1.10 2.26 0.56 1.04 1.05 1.94
MFP = Linear..MFS = Equal percentage * CV and KV values are referred to the selected diameter and plug type ( EQP/EQV–PL/LV only)
Via Lecco, 69/71
20864 AGRATE BRIANZA (MB)
Tel. 039/651.705 - 650.397
Fax 039/654.018
www.conflow.it
Maximum permissible pressure drops in Kg/cm2 (fluid opens)
Strokes in mm – Signals in psi
Actuator Signal DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100
type psi stroke 11 stroke 11 stroke 11 stroke 19 stroke 19 stroke 19 stroke 28 stroke 28 stroke 28
3-15 psi 12 8 5 3 - - - - -
T200
6-30 psi 52 32 18 11 - - - - -
3-15 psi 27 17 9 6 4 2.4 - - -
T250
6-30 psi 113 69 39 25 17 10 - - -
3-15 psi - - 15.5 10 7 3.5 2.5 1.7 0.9
T310
6-30 psi - - 63 41 28 16 10 7 4
3-15 psi - - - 14.5 10.5 5.5 3.8 2.5 1.4
T400
6-30 psi - - - 60 42 24 15 10.5 5.9
3-15 psi - - - 24.5 17.5 9.5 6.2 4.2 2.4
T500
6-30 psi - - - 101 70 40 25.3 17.5 9.9
T200 Signal MFP 1/8 “ MFP 3/16 “ MFP 1/4 “ MFP 3/8 “ MFS1SG 1/4 “ MFS2SG 1/4 “ MFS1SG 3/8 “ MFS2SG 3/8 “

DN15-20 3-15 psi 200 90 50 30 50 50 30 30

Microflow 6-30 psi 1080 470 270 130 270 270 130 130
1. The values given are referred to the force of actuator and they can be used within the limit of the body rating
2. The actuator DELTA-PI (PRESSURE DROPS with CLOSED VALVE) given in the column 3-15 psi are obtained with a thrust of 18 psi
3. The actuator DELTA-PI (PRESSURE DROPS with CLOSED VALVE) given in the column 6-30 psi are obtained with a thrust of 30 psi
4. The actuator DELTA-PI given in the column 6-30 psi are also valid for ON-OFF service with air supply at 30/35 psi
COMPONENTS LIST AND MATERIALS
COMPONENTS LIST MATERIALS
1. Body 1. See note (1) at page 1
2. Seat 2. AISI 316 stainless steel
3. Plug locknuts 3. AISI 304 stainless steel
4. Spring washer 4. AISI 304 stainless steel
5. Plug 5. AISI 316 stainless steel
6. Stem 6. AISI 316 stainless steel
7. Bonnet 7. See notes (1)-(2) at page 1
8. Guide bush 8. AISI 304 stainless steel
9. Body gasket 9. Europil WS 3640 or PTFE
10. Packing spring 10. AISI 302 stainless steel
11. Packing washer 11. AISI 304 stainless steel
12. Packing rings 12. See note (3) at page 1
13. Internal “O” ring 13. Viton FPM 70
14. External “O” ring 14. Viton FPM 70
15. Packing adjusting nut 15. AISI 303 stainless steel
16. Stud-bolts 16. Galvanized steel
17. Body locknuts 17. DIN 934 galvanized steel
18. Yoke 18. GGG50 spheroidal c. iron
19. Travel indicator plate 19. Policarbonate
20. Position indicator locknuts 20. DIN 936 galvanized steel
21. Position indicator 21. Aluminium
22. Diaphragm rod 22. AISI 303 stainless steel
23. “O” ring 23. NBR
24. Airtight 24. NBR
25. Yoke gasket 25. Cork – rubber
26. Lower diaphragm casing 26. P11 steel
27. Lower diaphragm casing 27. DIN 933 galvanized steel
internal bolts
28. Diaphragm spacer 28. Galvanized steel
29. Diaphragm 29. EPDM 70
30. Diaphragm plate 30. P01 steel
31. Springs 31. C98 UNI 3823
32. Diaphragm bush 32. AISI 303 stainless steel
33. Diaphragm locknut 33. ISO 7380 galvanized steel
34. Diaphragm casing bolts 34. DIN 934 galvanized steel
35. Upper diaphragm casing 35. P11 steel
36. Diaphragm casing 36. DIN 933 galvanized steel
locknuts

DIMENSIONS in mm.

C - Bonnet Actuator. E ØF
DN Ø A B D V V1
Std Finned Bellows
T200 70 210
15 1/2 “ 130 47.5 49 181 181 147 166 11
20 3/4 “ 150 52.5 58 190 190 147 166 11
T250 70 292
25 1“ 160 57.5 68 200 200 147 166 11
32 1.1/4 “ 180 70 70 202 202 147 166 19
T310 95 336
40 1.1/2 “ 200 75 82 214 214 160 166 19
50 2“ 230 82.5 86 218 218 160 166 19
T400 119 408
65 2.1/2 “ 290 92.5 111 309 309 160 166 28
80 3“ 310 100 135 333 333 160 166 28
T500 119 520
100 4“ 350 118 160 363 363 204 166 28

Specifications given are only indicative and not binding for the manifacturer who reserve the right to carry-out any modifications deemed
necessary without prior notice. All data sheets by CONFLOW SpA, are available last update on our internet web site
www.conflow.it.
 2000AR/E
UNIWORLD series PNEUMATIC VALVES 07 2016

SINGLE SEAT TWO WAY CONTROL VALVES

PED 2014/68/UE / ATEX 2014/34/UE / MACHINERY DIRECTIVE 2006/42/CE

TYPE 2000 AR
Normally closed – air opens
Face-to-face EN 558-1

DESCRIPTION
The “UNIWORLD” series type 2000 AR are equipped with EN
“straight-through” pattern bodies with EN flanges.
Modulating plug suitable for control of virtually all line media.
Compact construction assembled with multisprings pneumatic
actuator having 3-15 psi … 6.18 psi … 6-30 psi standard control
signals
On request can be equipped with a pneumatic or electro-pneumatic
pilot positioner.

SIZES : from DN 15 to DN 100 TECHNICAL CHARACTERISTICS OF PNEUMATIC ACTUATOR :

BODY CONNECTIONS : flanged EN 1092-1 PN16 PN40 • Actuator : diaphragm type
• Control signals : 3-15 psi … 6-18 psi … 6-30 psi
MATERIALS OF BODY GROUP (1) : • Max air supply pressure : 35 psi (2,5 bar)
• Cast iron EN-GJL-250 UNI EN 1561 PN 16 • Ambient temperature : -20 ... +70 °C *see on request
AISI 316 st. st. trim - C40 nickel plated steel bonnet • Actuator casings material : Fe P11 carbon steel
• Carbon steel 1.0619 PN 16 … PN 40 • Diaphragm material : EPDM 70
AISI 316 st. st. trim - C40 nickel plated steel bonnet • Yoke material : EN-GJS500-7 spheroidal cast iron
• Stainless steel AISI 316 1.4408 PN 16 … PN 40 • Pneumatic connections : ISO 7 Rp – 1/8”
AISI 316 st. st. trim - AISI 316 st. st. bonnet
MAX WORKING CONDITIONS :
PLUG : • Max inlet pressure and temperature : see leaflet n° 101/VP
• EQP (DN15-50) EQV (DN65-100) = equal percentage class IV° • Valve sizing : see leaflet n° 100/VP
• PL (DN15-50) LV (DN65-100) = linear class IV° • Rangeability : see leaflet n° GRAFICI/I
• PT (DN15-50) VPT (DN65-100) = quick lift class IV°
ON REQUEST :
BONNET (2) : • PTFE/GR soft seal ≤190°C class VI°
• Standard : -5 to + 200 °C • PTFE soft seal ≤150°C class VI°
• Finned : > 200 °C • Lapping on seat and plug class V°
• Extended : below - 5 °C • Stellite (degree 6°) on seat and plug and guide bush
• Bellows sealed : for thermal oil or hazardous media with • Reduced bore (see below table)
(PN 16 - 25 - 40) standard safety gland arrangement • Pneumatic pilot positioner 3-15 psi…3-9 psi…9-15 psi
• Electro-pneumatic pilot positioner 4-20 mA...4-12 mA...12-20 mA
GLAND ARRANGEMENT (PACKING) (3) with safety “0-rings” : • Air filter regulator
• PTFE 100% for temperatures ≤150 °C • Proximity limit switches
• PTFE 85% + GRAPHITE 15% for temperatures ≤ 200 °C • 3-way solenoid valve
• PURE GRAPHITE 100% for temperatures from 200° to 400 °C • Lubrificator on finned bonnet for temperatures ≥ 250 °C
to be used with finned bonnet • Top-work manual handwheel
• ATEX 94/9/CE dedicated configuration according to the fluid
• Kit diaphragm and actuator seals certified for a.t. ≥ - 50 °C

CV = american unit (flowrate in USGPM Kv = metric unit (flowrate in m3/h

with 1 psi of differential pressure) with 1 bar of differential pressure)
PLUG DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100
Full bore Ø 1/2” Ø 3/4” Ø 1” Ø 1.1/4” Ø 1.1/2” Ø 2” Ø 2.1/2” Ø 3” Ø 4”
CV 3.4 6.6 10.8 17 23.8 50 70.2 87.9 118.5
EQP
KV 2.9 5.7 9.3 14.7 20.5 43 60.5 75.2 102.1
PL CV 3.4 6.6 11.2 17.6 23.9 51.2 72.7 89.3 123.8
KV 2.9 5.7 9.6 15.2 20.6 44 62.7 77 106.7
PT
CV 3.4 6.6 12.1 19 24 52.7 107.3 129.3 175.4
KV 2.9 5.7 10.4 16.4 20.7 45.3 92.5 111.5 151.2
Reduced bore * • • 1/2” 1/2” 3/4” 3/4” 1” 1” 1.1/4” 1.1/4” 1.1/2” 1.1/2” 2” 2” 2.1/2” 2.1/2” 3”

• DN 15-20 MFP 1/8” MFP 3/16” MFP 1/4” MFP 3/8” MFS1SG 1/4” MFS2SG 1/4” MFS1SG 3/8” MFS2SG 3/8”
CV 0.26 0.71 1.28 2.62 0.65 1.21 1.22 2.25
KV 0.22 0.61 1.10 2.26 0.56 1.04 1.05 1.94
MFP = Linear..MFS = Equal percentage * CV and KV values are referred to the selected diameter and plug type ( EQP/EQV–PL/LV only)
Via Lecco, 69/71
20864 AGRATE BRIANZA (MB)
Tel. 039/651.705 - 650.397
Fax 039/654.018
www.conflow.it
Maximum permissible pressure drops in Kg/cm2 (fluid opens)
Strokes in mm – Signals in psi
Actuator Signal DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100
type psi stroke 11 stroke 11 stroke 11 stroke 19 stroke 19 stroke 19 stroke 28 stroke 28 stroke 28
3-15 psi 12 8 5 3 - - - - -
T200 6-18 psi 25 16 9 5.2 - - - - -
6-30 psi 65 40 22 11 - - - - -
3-15 psi 27 17 9 6 4 2.4 - - -
T250 6-18 psi 55 34 19 12 8 3 - - -
6-30 psi 110 68 38 20 14.5 7 - - -
3-15 psi - - 15.5 10 7 3.5 2.5 1.7 0.9
T310 6-18 psi - - 31 20 14 7 4.2 2.8 1.3
6-30 psi - - 62 30 21 12 6.5 4.7 2.6
3-15 psi - - - 14.5 10.5 5 3.8 2.5 1.4
T400 6-18 psi - - - 29.5 20.5 12 6.7 4 2.8
6-30 psi - - - 45 31.5 18 16 11 6.3
3-15 psi - - - 24.5 17.5 9.5 5.5 4.2 2.4
T500 6-18 psi - - - 49 34.5 19.5 12.2 7 4.9
6-30 psi - - - 75 52.5 30.3 26 16 10.5
Signal MFP 1/8 “ MFP 3/16 “ MFP 1/4 “ MFP 3/8 “ MFS1SG 1/4 “ MFS2SG 1/4 “ MFS1SG 3/8 “ MFS2SG 3/8 “
T200 3-15 psi 200 90 50 30 50 50 30 30
DN15-20 6-18 psi 400 180 100 60 100 100 60 60
Microflow
6-30 psi 1300 580 340 160 340 340 160 160
1. The values given are referred to the force of actuator and they can be used within the limit of the body rating
2. The actuator DELTA-PI (PRESSURE DROPS with CLOSED VALVE) are obtained without a residual thrust of air into the actuator
3. The actuator DELTA-PI given in the column 6-30 psi are also valid for ON-OFF service with air supply at 30/35 psi
COMPONENTS LIST AND MATERIALS
COMPONENTS LIST MATERIALS
1. Body 1. See note (1) at page 1
2. Seat 2. AISI 316 stainless steel
3. Plug locknuts 3. AISI 304 stainless steel
4. Spring washer 4. AISI 304 stainless steel
5. Plug 5. AISI 316 stainless steel
6. Stem 6. AISI 316 stainless steel
7. Bonnet 7. See notes (1)-(2) at page 1
8. Guide bush 8. AISI 304 stainless steel
9. Body gasket 9. Europil WS 3640 or PTFE
10. Packing spring 10. AISI 302 stainless steel
11. Packing washer 11. AISI 304 stainless steel
12. Packing rings 12. See note (3) at page 1
13. Internal “O” ring 13. Viton FPM 70
14. External “O” ring 14. Viton FPM 70
15. Packing adjusting nut 15. AISI 303 stainless steel
16. Stud-bolts 16. Galvanized steel
17. Body locknuts 17. DIN 934 galvanized steel
18. Yoke 18. GGG50 spheroidal c. iron
19. Travel indicator plate 19. Policarbonate
20. Position indicator locknuts 20. DIN 936 galvanized steel
21. Position indicator 21. Aluminium
22. Diaphragm rod 22. AISI 303 stainless steel
23. “O” ring 23. NBR
24. Airtight 24. NBR
25. Yoke gasket 25. Cork – rubber
26. Lower diaphragm casing 26. P11 steel
27. Lower diaphragm casing 27. DIN 933 galvanized steel
internal bolts
28. Diaphragm spacer 28. Galvanized steel
29. Diaphragm 29. EPDM 70
30. Diaphragm plate 30. P01 steel
31. Springs 31. C98 UNI 3823
32. Diaphragm bush 32. AISI 303 stainless steel
33. Diaphragm locknut 33. ISO 7380 galvanized steel
34. Diaphragm casing bolts 34. DIN 934 galvanized steel
35. Upper diaphragm casing 35. P11 steel
36. Diaphragm casing 36. DIN 933 galvanized steel
locknuts
DIMENSIONS in mm.
C - Bonnet Actuator E ØF
DN Ø A B D V V1
Std Finned Bellows
T200 70 210
15 1/2 “ 130 47.5 49 181 181 147 166 11
20 3/4 “ 150 52.5 58 190 190 147 166 11
T250 70 292
25 1“ 160 57.5 68 200 200 147 166 11
32 1.1/4 “ 180 70 70 202 202 147 166 19
T310 95 336
40 1.1/2 “ 200 75 82 214 214 160 166 19
50 2“ 230 82.5 86 218 218 160 166 19
T400 119 408
65 2.1/2 “ 290 92.5 111 309 309 160 166 28
80 3“ 310 100 135 333 333 160 166 28
T500 119 520
100 4“ 350 118 160 363 363 204 166 28
Specifications given are only indicative and not binding for the manifacturer who reserve the right to carry-out any modifications deemed necessary without prior
notice. All data sheets by CONFLOW SpA, are available last update on our internet web site www.conflow.it.