Enamel Storage Electric Water Heater
Enamel Storage Electric Water Heater
Enamel Storage Electric Water Heater
Enameled steel Enameled steel Enameled steel Enameled steel Enameled Steel Enameled Steel
Inner tank
(Thickness: 2.5mm) (Thickness: 2.5mm) (Thickness: 2.5mm) (Thickness: 2.5mm) (Thickness: 2.5mm) (Thickness: 2.5mm)
Galvanized steel Galvanized steel Galvanized steel Galvanized steel Galvanized steel Galvanized steel
Outer tank
(Color: White, Grey) (Color: White, Grey) (Color: White, Grey) (Color: White, Grey) (Color: White, Grey) (Color: White, Grey)
Rated working pressure 700 kPa 700 kPa 700 kPa 700 kPa 700 kPa 700 kPa
1/2
New Technology - Water storage tanks are adapted to the advanced technology of vitreous enamel inner
tank, which fuses to solid steel at about 900°C. The result is a smooth and tough surface that effectively
resists the corrosive attacks of hot water chemicals, thus ensuring a long life span of water tank, especially
suitable for the areas of hard water.
Insulation protection - CFC free polyurethane foam insulation is injected and surrounds the inner tank,
filling the space between the inner tank and outer tank thus providing an exceptionally good heat retention
barrier. This helps to reduce the energy cost by minimizing standby heat loss.
Electric Element - Low density Incoloy 800 immersion type element ensures long lasting performance with
choice of various heat input (kw) offering different hot water recovery rates.
Anode Protection - Each tank is provided with a magnesium anode rod to protect it against corrosion, a
process well proven in years of application.
Safety Protection - Each tank is provided with a pressure and temperature relief valve (P/T valve). It protects the tank against excessive pressure and
temperature by releasing its contents safely to the floor trap via the drain pipe.
Drawing -
2/2