Connection Catalog
Connection Catalog
Connection Catalog
+39 0733 870 870 - Fax +39 0733 870 880 - www.elettromedia.it 8
Connection... Interconnections to reveal every musical detail. Speaker cables, power cables and distribution accessories for the extreme current demands of your high power system. Connection was designed using only the best available materials. Audisons top level engineering teams most advanced technologies were employed to produce every single component. Three performance / price levels to satisfy the needs of any enthusiast, competitor or reference audiophile. When unparalleled quality and uncompromising reliability are not choices, they are requirements Connection from Audison The Power Transfer System.
Power & Ground Cable ................................................ Speaker Cable ........................................................... Signal Cable .............................................................. Audio Interconnect ...................................................... Video Interconnect ...................................................... Fuse ......................................................................... Fuse Holder................................................................ Fuse Distribution ......................................................... Distribution Block........................................................ Fuse & Distribution System ........................................... Battery Clamp ............................................................ Battery Terminal .......................................................... Ring Terminal ............................................................. Ground Terminal ......................................................... Main Crimp ................................................................ Heatshrink Sheath ...................................................... Superfarad ................................................................ Power Kit .................................................................. Amplifier Kit ............................................................... Technical Notes ..........................................................
02 04 08 09 14 15 16 18 19 20 22 24 25 26 27 27 28 30 31 32
Warranty
All the products in this price list are guaranteed according to the terms of law. Potentially defective products must be returned to an authorized Connection dealer for repair or replacement. Products damages due to misuse are not covered by this warranty.
Notes
Elettromedia is an ISO 9001:2000 certified company. All of its research and development activities are carried out in compliance with the reference norm. Elettromedia carries on an intense research and development process, aimed at the continued improvement of its products. Because of this philosophy, continuous adoption of new materials and technology may lead to product changes without notice. Technical features, aesthetics and prices of Elettromedia products may be different from the ones indicated in this price list. Elettromedia does not assume any responsibility for the direct or indirect damages due to eventual product modifications or changes.
MAINPOWER
MP 1/0BL MP 1/0S
MP PGI
MAINPOWER SERVICE
3 CONDUCTORS: 2 x 1 AWG power and ground conductors, 4 1x1 AWG remote turn-on wire 6 ALL IN ONE wire bundle for easy, time saving installation SOFT TOUCHTM jacket to enhance the feel and flexibility BLUE & SILVER translucent matte finish jacket for enhanced cosmetics RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88 CONVENIENT for powering processors and accessories
3,10
POWER FLOW
PF 2BK
PF 2R
S 210
S 212 S 21 4
Speaker Cable
ULTRA FLAT
UF 212
UF 21 4
UF 216
SILVER
SL 212 SL 21 4
SL 216
SOFT TOUCHTM jacket to enhance the feel SL 218 and flexibility SILVER translucent matte finish TWO OR FOUR conductors available RESISTANT JACKET against abrasion, heat and chemicals; made of ELEC 88 MULTIPLE TWIST WINDING CONFIGURA TION, seven silver finished strand construction for detailed musicality and high power transfer X3 FLEXIBLE for PROFESSIONAL installations
Speaker Cable
SILVER
SL 4 4 1
4,20
FLASH
FL 21 BL 4 FL 21 Y 4 FL 21 O 4
Speaker Cable
FT
FT 21 4 FT 216
1,75 1,15
BASIC1
B 18
0,73
Speaker Cable
SB
SB 20
12,70
Signal Cable
ST2
ST Y ADAPTER
STF 030
27,00 27,00
Audio Interconnect
BT2
BT SERIES HIGH EFFICIENCY SIGNAL CABLES
2-4-6 CHANNELS available SOFT TOUCHTM translucent, matte blue jacket makes for an extremely flexible cable POLYAMIDE POLYMER outer jacket protects inner conductors WTPTM Winding T wisted Pair balanced conductors reject low frequency electro-magnetic fields aiding in noise rejection OVER 60 dB noise rejection C H R O M E S AT I N A B S T M s t y l e machined metal contacts TUG-PROOF sealed internal connection for maximum reliability MOLDED Y BLOCK for protection of the conductors in the critical split point COMPETITION GRADE performance
BT4
10
Audio Interconnect
BT6
42,00 45,00
BT Y ADAPTER
BTF 030
9,90 9,90
1 1
Audio Interconnect
FT2
FT SERIES HIGH VALUE SIGNAL CABLES
HIGHLY TRANSPARENT clear outer jacket for enhanced cosmetics BALANCED twisted pair, silver finished conductors enhance noise rejection 24KT GOLD-PLATED connectors with split tip for enhanced performance and reliability RIGHT ANGLE CONNECTOR on one end to aid in tough installations TUG-PROOF sealed internal connection for maximum reliability PROFESSIONAL GRADE performance
FT Y ADAPTER
FTF 030
MOLDED Y BLOCK for protection of the conductors in the critical split point
4,10 4,10
12
Audio Interconnect
FS2
FS SERIES HIGH VALUE SIGNAL CABLES
SOFT TOUCHTM translucent, matte blue jacket makes for a flexible cable UCSTM LOW NOISE SHIELD for improved noise rejection 24KT GOLD-PLATED connectors with split tip for enhanced performance and reliability TUG-PROOF sealed internal connection for maximum reliability EXTENDED REMOTE TURN-ON WIRE to power up connected components VALUE GRADE performance
FS Y ADAPTER
FSF 030
MOLDED Y BLOCK for protection of the conductors in the critical split point
3,90 3,90
13
Audio Interconnect
BV1
SGIDTM Special Gas Injected Dielectric 75 Ohm constant impedance SOFT TOUCHTM outer jacket Braided true silver coated outer shield for increased noise rejection Silver coated central conductors for improved frequency response CHROME SATIN machined metal contacts Injection molded compact body for reliable performance
1 4
Video Interconnect
SFA
PLATINUM SATIN AFS fuse for use on all Connection fuse systems CONVENIENT transparent casing for easy condition verification CONNECTION monogram molded into casing for great cosmetics 15 A thru 300 A values available
15
Fuse
SFH
SFH 1 1WP
COMPLETELY WATERPROOF POLYCARBONATE CRYSTALS casing 4 AWG thru 1/0 AWG inputs for any current demand SMBTM solid machined brass construction for better current transfer PLATINUM SATIN finish for unparalleled cosmetic appeal KNURLED SCREWS for better contact with the attached wire AFS FUSE 1 A thru 300 A available 5
35,00
BFH
POLYCARBONATE CRYSTALS casing, strong and scratch resistant 4 AWG thru 1 AWG inputs for any current demand /0 SMB TM solid machined brass construction for better current transfer CHROME SATIN finish for enhanced cosmetics KNURLED SCREWS for better contact with the attached wire RECESSED inset cable collar for protection against stray wire strands AFS FUSE 1 A thru 300 A available 5
BFH 1 1
27,00
16
Fuse Holder
FFH
FFH 14 Mini ANL line
POLYCARBONA TE casing, strong and scratch resistant 4 AWG inputs for high current demand C H R O M E S AT I N f i n i s h f o r e n h a n c e d cosmetics AFS FUSE 1 A thru 300 A available 5
FFH 1 4
9,00
17
Fuse Holder
28,00
BFD 21
BFD 4 1
39,00
18
26,00
BDB 51
BDB 1 1 1
36,00
FDB
POLYCARBONATE casing, strong and scratch resistant 8 AWG thru 4 AWG inputs for high current demand SMBTM solid machined brass construction for better current transfer CHROME SATIN finish for enhanced cosmetics RECESSED inset cable collar for protection against stray wire strands
9,00
19
SFD
UNIQUE ONE PIECE fuse and ground system for clean, reliable installations P O LYCA R B O N AT E c a s i n g , strong and scratch resistant 1/0 AWG on both fused and ground input, 1/0 AWG pass thru on fused block SMBTM solid machined brass c o n s t ru c t i o n fo r b e t t e r current transfer PLATINUM SATIN finish for unparalleled cosmetic appeal KNURLED SCREWS for better contact with the attached wire RECESSED inset cable collar for protection against stray wire strands MOLDED CABLE REST keeps wires safe and nicely laid out 1 2 AWG and 3 4 AWG on both AFS fused and ground outputs
SFD 4 1C
66,00
20
BFH 1 4
11,80
17,90
BDB 44
BDB 24
11,00
21
SBC
POLYCARBONATE CRYSTALS casing, strong and scratch resistant SEPARATE POSITIVE AND NEGATIVE post designs for better fit WRAP AROUND clamp design for a tight, reliable connection SMBTM solid machined brass construction for better current transfer PLATINUM SATIN finish for unparalleled cosmetic appeal KNURLED SCREWS for better contact with the attached wire RECESSED inset cable collar for protection against stray wire strands
19,80 19,80
BBC
UNIQUE AFS FUSED POSITIVE post battery clamp, 1 A thru 300 A available 5 POLYCARBONATE CRYSTALS casing, strong and scratch resistant WRAP AROUND clamp design for a tight, reliable connection SMBTM solid machined brass construction for better current transfer CHROME SATIN finish for enhanced cosmetics KNURLED SCREWS for better contact with the attached wire RECESSED inset cable collar for protection against stray wire strands
BBC 4 1P
26,00
22
Battery Clamp
FBC
POLYCARBONATE casing, strong and scratch resistant SEPARATE POSITIVE AND NEGATIVE post designs for better fit WRAP AROUND clamp design for a tight, reliable connection RING TERMINAL connection and 2 8 AWG outputs for flexible system design SMB TM solid machined brass construction for better current transfer CHROME SATIN finish for enhanced cosmetics
10,80 10,80
23
Battery Clamp
FBT
EXTENSION POST for side post batteries SHORT AND LONG designs for maximum flexibility SRT AND FRT RING TERMINALS are a perfect companion CHROME SATIN finish for enhanced cosmetics
4,70
5,00
24
Battery T erminal
SRT
REFERENCE ring terminal with stylized Connection sheath 1/0 AWG, 2 AWG and 4 AWG input sizes available SMBTM solid machined brass construction for better current transfer RECESSED inset cable collar for protection against stray wire strands TRANSLUCENT connector boot with Connection monogram included PLATINUM SATIN finish for unparalleled cosmetic appeal
FRT LINE
CRIMP OR SOLDER TYPE ring terminal 2, 4, 8 and 1 AWG input sizes available 0 BLUE & SILVER connector jackets for safety and cosmetic appeal included CHROME SATIN finish for enhanced cosmetics
25
Ring T erminal
SGT
LARGE FOOTPRINT for better ground on high power systems 1/0 AWG input for high current systems SMBTM solid machined brass construction for better current transfer PLATINUM SATIN finish with Connection monogram
SGT 1 1
7,50
BGT
LARGE FOOTPRINT for better ground on high power systems 2 AWG input for high current systems SMBTM solid machined brass construction for better current transfer CHROME SATIN finish with Connection monogram
BGT 21
6,60
26
Ground T erminal
SMC
THE ULTIMATE cable termination 1/0, 2, 4, 8 and 10 AWG sizes available PROVIDES unparalleled contact between cable and chosen connector MORE contact area = MORE current transfer = MORE POWER PREVENTS stray wire strands shorting out for safety and reliability SILVER FINISHED copper construction
RADIA TED FLAME-PROOF POL YOLEFIN RESISTANT to high temperature conditions APPLIED HEAT provides a suction effect around the wrapped connection point PROVIDES PROTECTION for terminated wires assuring s a f e t y a n d re l i a b i l i t y
27
Heatshrink Sheath
SHS
Main Crimp
BSF
20 VOLT DESIGN for high current capability X 3 - LO W E S R fo r b e t t e r current transfer < 1,5 m WIDE TEMPERATURE RANGE for constant performance ANTI-VIBRATION DESIGN for improved reliability ELECTROLYTE RESERVE for long lasting capability Tolerance 2%
BSF 1 3
BSF 1 3
80,00 115,00
28
Superfarad
BCA
CAPACITOR DISTRIBUTION for power and ground SMBTM solid machined brass construction for better current transfer H I G H C U R R E N T L O W R E S I S TA N C E connection for better current transfer UPGRADE WITH BCA DGT digital voltage read out for BCA 32 S I M P L I F I E D I N S TA L L AT I O N M A X I M U M PERFORMANCE
BCA 32
30,00
35,00
BCA DGT
BCA 1 4
17,00
29
Superfarad
FPK
Installation Kit for the proper power hook-up of a single amplifier up to 300 or 600 watts
5 , 2 m /17 f t . t ra n s p a re n t b l u e power cable FFH fuse holder AFS fuse included 1 m/3.3 ft. transparent silver ground cable 5,2 m/1 ft. 1 AWG blue remote 7 8 turn-on cable 1 m/5 ft. of split loom ,5 All required ring and fork terminals included Cable ties, split loom and snap grommet included
45,00 29,00
30
Power Kit
FSK
Installation Kit for the complete proper hook-up of a single amplifier up to 300 watts
5,2 m/17 ft. transparent blue power cable FFH fuse holder 60 A AFS fuse included 1 m/3.3 ft. transparent silver ground cable 5,2 m/17 ft. 1 AWG blue remote turn-on cable 8 10 m/33 ft. FT 216, 16 AWG speaker cable 5 m/16.5 ft. FT2 500 audio interconnect 1,5 m/5 ft. of split loom All required ring and fork terminals included Cable ties, split loom and snap grommet included
42,00
31
Amplifier Kit
Technical Notes
10137010
32/33