Ge XL Go Plus Videoprobe NDT Video Borescope Operating Manual 648718

GE
Inspection Technologies Remote Visual Inspection
1.4 mm Working Tools

Operating Manual
www.geinspectiontechnologies.com
Table of Contents
What You Have Received.......................................................................1
Distally Inserted Tools...........................................................................1
Proximally Inserted Tools......................................................................3
Safety Cap . .......................................................................................5
Tools Requiring Disassembly.................................................................6
Hook / Comparitor (Gage) Assembly ...................................................10
User Care and Maintenance ...............................................................11
Service Contact Information . .............................................................12
What You Have Received

DISTAL REFERS TO WORKING END OF TOOL.
PROXIMAL REFERS TO PLUNGER END OF TOOL.
Distally Inserted Tools

Part Number: Description:
WT-141432HC Hook Comparitor Cable 3.2M Working Length

WT-141426HC Hook Comparitor Cable 2.6M Working Length
WT-148032M 8.0mm Magnet Tool 3.2M Working Length
WT-143532B 3.5mm Brush Tool 3.2M Working Length
WT-143526B 3.5mm Brush Tool 2.6M Working Length
Key:
WT=Working Tool, First Two Digits=Cable Diameter, Third and Forth Digits=Tool Diameter,
Fifth and Sixth Digits=Working Length.
Distally Inserted Tools (continued...)
1 Find the proximal end of the working tool and carefully insert the tool into the
working channel at the distal end of the VideoProbe®.
2 Carefully slide tool through the working channel to the desired location.
Proximally Inserted Tools
WT-141432P 1.4mm Three Prong Gripper Tool 3.2M Working Length

WT-141426P 1.4mm Three Prong Gripper Tool 2.6M Working Length
WT-141432A 1.4mm Alligator Tool 3.2M Working Length
WT-141432S 1.4mm Snare Tool 3.2M Working Length
WT-141426S 1.4mm Snare Tool 2.6M Working Length
Key:
1 Find the distal end of the working tool and carefully insert the tool into the
working channel at the proximal end of the VideoProbe.
Proximally Inserted Tools (continued...)
2 Carefully slide tool through the working channel to the desired location.
3 Use the clip on the Umbilical tube to keep Plunger Handle secure when not in
use.
Safety Cap
1 Use the supplied safety cap to secure the end of non-plunger activated tools.
Tools Requiring Disassembly

Key:
1 Plunger handle of working tool must be dissembled prior to insertion into the
working channel.

a Loosen thumbscrew.
Tools Requiring Disassembly (continued...)
b Slide back black Actuator.
c Unscrew metal cap.
Tools Requiring Disassembly (continued...)
d Remove cable pin from cable.
d Remove metal cap from cable.
2 Insert proximal end of cable through the distal end of the VideoProbe®.
3 Re-assemble plunger handle in reverse order of Step 1 (e-a).
NOTE: On re-assembly make sure enough of the cable is showing so thumbscrew

makes a good connection.
Hook / Comparitor (Gage) Assembly
WT-H Hook Piece (Qty 5)

WT-C Comparitor Piece (Qty 5)
Key:
NOTES:
• Always check the hook and comparitor (gage) assemblies prior to inspection of an
engine for any looseness, bends, deformity, or other irregularities.
• Check the threaded portion of the spring shaft. Do not use if it is deformed.
1 Grip cable portion with pliers and push the hook or comparitor (gage) over
the spring shaft’s distal end.
10 1.4 mm Working Tools
Hook / Comparitor (Gage) Assembly (continued...)
2 Screw the hook over the spring shaft’s distal end slowly turning the hook
clockwise.
1.4 mm Working Tools 11
Environmental Compliance
The equipment that you bought has required the extraction and use of natural resources
for its production. It may contain hazardous substances that could impact health and the
environment.
In order to avoid the dissemination of those substances in our environment and to diminish
the pressure on the natural resources, we encourage you to use the appropriate take-back
systems. Those systems will reuse or recycle most of the materials of your end life equip-
ment in a sound way.
The crossed-out wheeled bin symbol invites you to use those systems.
If you need more information on the collection, reuse and recycling systems, please contact
your local or regional waste administration.
Visit www.ge.com/inspectiontechnologies for take-back instructions and more information

about this initiative.
12 1.4 mm Working Tools
Service Contact Information

USA
GE Inspection Technologies Tel: 315-554-2000 ext. 1
Product Service Dept. Fax: 866-899-4184
721 Visions Drive Email: [email protected]
Skaneateles, NY 13152
Germany
GE Inspection Technologies Tel: +49-7471-9882 20
Lotzenäcker 4 Fax: +49 7471-9882 30
72379 Hechigen Email: [email protected]
Hong Kong
GE Inspection Technologies Tel: +852-2877-0801
Unit 1602, 16/F Sing Pao Building Fax: +852-2877-0868
101 King's Road Email: [email protected]
North Point, Hong Kong
Customer Support Centers
North/South America
721 Visions Drive
Skaneateles, NY 13152
Tel: 888-332-3848
315-554-2000 ext. 1
Email: [email protected]
Europe
Lotzenäcker 4
72379 Hechingen
Germany
Tel: +49 (0) 7471 9882 0
Asia/Pacific
Unit 1602, 16/F Sing Pao Building
101 King’s Road
North Point
Hong Kong
Tel: +852 2877 0801
©2008 General Electric Company.

VideoProbe is a registered trademark of General Electric Company.
XL PRO is a trademark of GEneral Electric Company.
Manufactured in USA by GE Inspection Technologies
XA161 Rev. F Printed in USA

Ge XL Go Plus Videoprobe NDT Video Borescope Operating Manual 648718

Uploaded by

Copyright:

Available Formats

Ge XL Go Plus Videoprobe NDT Video Borescope Operating Manual 648718

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ge XL Go Plus Videoprobe NDT Video Borescope Operating Manual 648718

Uploaded by

Copyright:

Available Formats

GE

Inspection Technologies Remote Visual Inspection

1.4 mm Working Tools

Distally Inserted Tools...........................................................................1

Proximally Inserted Tools......................................................................3

Safety Cap . .......................................................................................5

Tools Requiring Disassembly.................................................................6

Hook / Comparitor (Gage) Assembly ...................................................10

User Care and Maintenance ...............................................................11

Service Contact Information . .............................................................12

What You Have Received

PROXIMAL REFERS TO PLUNGER END OF TOOL.

Distally Inserted Tools

WT-141432HC Hook Comparitor Cable 3.2M Working Length

Distally Inserted Tools (continued...)

Proximally Inserted Tools

Part Number: Description:

WT-141432P 1.4mm Three Prong Gripper Tool 3.2M Working Length

Proximally Inserted Tools (continued...)

Tools Requiring Disassembly

Part Number: Description:

WT-143032A 3.0mm Alligator Tool 3.2M Working Length

Tools Requiring Disassembly (continued...)

b Slide back black Actuator.

c Unscrew metal cap.

Tools Requiring Disassembly (continued...)

d Remove cable pin from cable.

d Remove metal cap from cable.

3 Re-assemble plunger handle in reverse order of Step 1 (e-a).

NOTE: On re-assembly make sure enough of the cable is showing so thumbscrew

Hook / Comparitor (Gage) Assembly

Part Number: Description:

WT-H Hook Piece (Qty 5)

Hook / Comparitor (Gage) Assembly (continued...)

Visit www.ge.com/inspectiontechnologies for take-back instructions and more information

Service Contact Information

©2008 General Electric Company.

Manufactured in USA by GE Inspection Technologies

XA161 Rev. F Printed in USA

You might also like