Assembly Language Programming

Assembly Language Programming Programs written in high-level languages such as BASIC, Ada and Pascal are usually converted
by compilers into assembly language (which in turn is translated into machine language programs - sequences of 1s and 0s by an assembler). Even today, with very good quality compilers available, there is the need for programmers to understand assembly language. First, it provides programmers with a better understanding of the compiler and what are its constraints. Second, on occasion, programmers find themselves needing to program directly in assembly language in order to meet constraints in execution speed or space (for example, writing games for micros and arcade machines). A good programmer can typically tweek and tune an assembly language program to run significantly better than the code generated by even the best compilers. The ASCL Assembly Language, AAL, runs on an ACSL computer that has an unlimited amount of memory. Each word of memory contains a decimal integer in the range 999,999 through 999,999. Additions, subtractions, and multiplications are performed modulo 1,000,000. For example, 999,998 plus 7 equals 5. Division is performed in the conventional sense, but the fractional part of the answer is dropped not rounded off. For example, 14 divided by 5 is 2. Execution starts at the first line of the program and continues sequentially, except for branch instructions, until the end instruction is encountered. The result of each operation is stored in a special word of memory, called the accumulator (ACC). Each line of an assembly language program has the following fields (lower-case italics indicates optional components): label OPCODE LOC comments
The label is a character string beginning in the first column. Valid OPCODEs are listed in the chart below. The LOC field is either a reference to a label or immediate data. For example, LOAD A would put the contents referenced by the label A into the ACC; LOAD =123 would store the value 123 in the ACC. Only those instructions that do not modify the LOC field can use the immediate data format. In the following chart, they are indicated by an asterisk in the first column.
OPCODE * LOAD STORE * ADD * SUB * MULT * DIV
ACTION Contents of LOC are placed in the ACC. LOC is unchanged. Contents of ACC are placed in the LOC. ACC is unchanged. Contents of LOC are added to the contents of the ACC. The sum is stored in the ACC. LOC is unchanged. Addition is modulo 1,000,000. Contents of LOC are subtracted from the contents of the ACC. The difference is stored in the ACC. LOC is unchanged. Subtraction is modulo 1,000,000. The contents of LOC are multiplied by the contents of the ACC. The product is stored in the ACC. LOC is unchanged. Multiplication is modulo 1,000,000. Contents of LOC are divided into the contents of the ACC. The signed integer part of the quotient is stored in the ACC. LOC is unchanged.
BE BG BL BU END READ * PRINT DC
Branch to instruction labeled with LOC if ACC=0. Branch to instruction labeled with LOC if ACC>0. Branch to instruction labeled with LOC if ACC<0. Branch unconditionally to instruction labeled with LOC. Program terminates. LOC field is ignored. Read a signed integer (modulo 1,000,000) into LOC. Print the contents of LOC. The value of the memory word defined by the LABEL field is defined to contain the specified constant. The LABEL field is mandatory for this opcode. The ACC is not modified.
References We chose to define our own assembly language rather than use a real one in order to eliminate the many sticky details associated with real languages. The basic concepts of AAL are common to all assembly languages. A reference manual for any real assembly language should prove helpful to prepare for this category. Also, the following article presents many of the concepts of assembly language programming in a very readable and fun way: Dewdney, A.K. Computer Recreations, in Scientific American, May 1984, pp. 14-22.
Sample Problems After the following program is executed, what value is in location TEMP? TEMP A B C DC DC DC DC LOAD MULT ADD DIV SUB STORE 0 8 -2 3 B C A B A TEMP
The ACC takes on values -2, -6, 2, -1 and -9 in that order. The last value, -9, is stored in TEMP.
After the following program is executed, what is the final value of A ? The data for the program is 3. A START READ DC LOAD SUB BE STORE LOAD ADD STORE BU END N 1 N =1 RSLT N A =2 A START
This program finds the Nth odd integer. The following table gives the values of N and A through execution: N 3 2 1 0 A 1 3 5 5
Thus, the final value of A is 5.
RSLT
If the following program has an input value of N, what is the final value of X which is computed? Express X as a mathematical expression in terms of N. READ LOAD SUB BE STORE MULT STORE LOAD BU END X X =1 DONE A X X A TOP
TOP
This program loops between labels TOP and DONE for A times. A has an initial value of X, and subsequent values of A-1, A-2, , 1. Each time through the loop, X is multiplied by the current value of A. Thus, X=A*A-1**1 or X=A!. Since the initial value of A is the number input (i.e., N), X=N!.
DONE

Assembly Language Programming

Uploaded by

Copyright:

Available Formats

Assembly Language Programming

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Assembly Language Programming

Uploaded by

Copyright:

Available Formats

Assembly Language Programming Programs written in high-level languages such as BASIC, Ada and Pascal are usually converted

OPCODE * LOAD STORE * ADD * SUB * MULT * DIV

BE BG BL BU END READ * PRINT DC

Thus, the final value of A is 5.

You might also like