SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

SECTION 1. IDENTIFICATION

Product name : MasterRoc MP 355 1K Accelerator

Product code : 000000000050734397 000000000050734397

Other means of identification : No data available

Manufacturer or supplier's details

Company name of supplier : Master Builders Solutions Canada Inc.

Address : 1800 CLARK BLVD

Brampton ON L6T 4M7

Emergency telephone : ChemTel: +1-813-248-0585;

National Emergency Tele- : USA: +1-800-255-3924 ChemTel contract no. MIS9240420

phone Number

Recommended use of the chemical and restrictions on use

Recommended use : Product for construction chemicals
Product for construction chemicals

Restrictions on use : Reserved for industrial and professional use.

SECTION 2. HAZARDS IDENTIFICATION

GHS classification in accordance with the Hazardous Products Regulations

Acute toxicity (Inhalation - : Category 4
vapour)

Skin corrosion/irritation : Category 1B

Serious eye damage/eye : Category 1

irritation

Specific target organ toxicity : Category 3

- single exposure

GHS label elements

Hazard pictograms :

Signal Word : Danger

Hazard Statements : H332 Harmful if inhaled.

H335 May cause respiratory irritation.

1 / 11
SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

H314 Causes severe skin burns and eye damage.

Precautionary Statements :
Prevention:
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ protective clothing/ eye protection/
face protection.
P260 Do not breathe dusts or mists.
P264 Wash face, hands and any exposed skin thoroughly after
handling.
Response:
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water
for several minutes. Remove contact lenses, if present and easy
to do. Continue rinsing.
P304 + P340 IF INHALED: Remove person to fresh air and
keep comfortable for breathing.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately
all contaminated clothing. Rinse skin with water/ shower.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT
induce vomiting.
P310 Immediately call a POISON CENTER or doctor/ physician.
Storage:
P403 + P233 Store in a well-ventilated place. Keep container
tightly closed.
P405 Store locked up.
Disposal:
P501 Dispose of contents/container to appropriate hazardous
waste collection point.

Other hazards
No data available.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substance / Mixture : Mixture

Chemical nature : No data available.

Components
Chemical name Common CAS-No. Concentration (% w/w)
Name/Synonym
2- Ethanol, 2- 108-01-0
dimethylaminoethanol (dimethyla- >= 10 - < 20
mino)-
triethylenediamine 1,4- 280-57-9
Diazabicy- >= 1 - < 7
clo[2.2.2]octane

SECTION 4. FIRST AID MEASURES

2 / 11
SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

General advice : Move out of dangerous area.

Consult a physician.
Show this material safety data sheet to the doctor in attend-
ance.
Do not leave the victim unattended.

If inhaled : Consult a physician after significant exposure.

If unconscious, place in recovery position and seek medical
advice.

In case of skin contact : Immediate medical treatment is necessary as untreated

wounds from corrosion of the skin heal slowly and with difficul-
ty.
If on skin, rinse well with water.
If on clothes, remove clothes.

In case of eye contact : Small amounts splashed into eyes can cause irreversible tis-
sue damage and blindness.
In the case of contact with eyes, rinse immediately with plenty
of water and seek medical advice.
Continue rinsing eyes during transport to hospital.
Remove contact lenses.
Protect unharmed eye.
Keep eye wide open while rinsing.
If eye irritation persists, consult a specialist.

If swallowed : Keep respiratory tract clear.

Do NOT induce vomiting.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
Take victim immediately to hospital.

Most important symptoms : No symptoms known or expected.

and effects, both acute and
delayed

Notes to physician : Treat symptomatically.

SECTION 5. FIRE-FIGHTING MEASURES

Suitable extinguishing media : Foam

Water spray
Dry powder
Carbon dioxide (CO2)

Unsuitable extinguishing : High volume water jet

media

Specific hazards during fire : Do not allow run-off from fire fighting to enter drains or water
fighting courses.

Further information : Collect contaminated fire extinguishing water separately. This

must not be discharged into drains.

3 / 11
SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

Fire residues and contaminated fire extinguishing water must

be disposed of in accordance with local regulations.

Special protective equipment : In the event of fire, wear self-contained breathing apparatus.
for fire-fighters

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protec- : Use personal protective equipment.

tive equipment and emer- Ensure adequate ventilation.
gency procedures

Environmental precautions : Prevent product from entering drains.

Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains inform
respective authorities.

Methods and materials for : Soak up with inert absorbent material (e.g. sand, silica gel,
containment and cleaning up acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.

SECTION 7. HANDLING AND STORAGE

Advice on protection against : Normal measures for preventive fire protection.

fire and explosion

Advice on safe handling : Avoid formation of aerosol.

Do not breathe vapors/dust.
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the ap-
plication area.
Provide sufficient air exchange and/or exhaust in work rooms.
To avoid spills during handling keep bottle on a metal tray.
Dispose of rinse water in accordance with local and national
regulations.

Conditions for safe storage : Keep container tightly closed in a dry and well-ventilated
place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.

Further information on stor- : Keep only in the original container in a cool, dry, well-
age conditions ventilated place away from ignition sources, heat or flame.
Protect from direct sunlight.
Store protected against freezing.

Materials to avoid : No applicable information available.

Recommended storage tem- : 5 °C

perature

4 / 11
SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

35 °C

Further information on stor- : Minimum storage temperature:

age stability

Maximum storage temperature:

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Ingredients with workplace control parameters

Contains no substances with occupational exposure limit values.
Engineering measures : No applicable information available.

Personal protective equipment

Respiratory protection : Wear appropriate certified respirator when exposure limits
may be exceeded.
Use NIOSH approved respiratory protection.

Hand protection

Remarks : The suitability for a specific workplace should be discussed

with the producers of the protective gloves.

Eye protection : Eye wash bottle with pure water

Tightly fitting safety goggles
Wear face-shield and protective suit for abnormal processing
problems.

Skin and body protection : Impervious clothing

Choose body protection according to the amount and con-
centration of the dangerous substance at the work place.

Protective measures : Do not inhale gases/vapours/aerosols.

Avoid contact with the skin, eyes and clothing.
Handle in accordance with good building materials hygiene
and safety practice.

Hygiene measures : When using do not eat or drink.

When using do not smoke.
Wash hands before breaks and at the end of workday.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance : liquid

Color : colourless to yellowish

Odor : amine-like

5 / 11
SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

Odor Threshold : No data available

pH : 8-9

Melting point : No applicable information available.

Freezing point No applicable information available.

boiling temperature : > 150 °C

Flash point : > 100 °C

Method: Flashpoint test using closed cup, determination of

flashpoint.

Evaporation rate : not determined

Upper explosion limit / Upper : Not applicable

flammability limit

Not applicable

Lower explosion limit / Lower : Not applicable

flammability limit

Vapor pressure : No data available

Relative vapor density : not determined

Density : approx. 1 g/cm3 (20 °C)

Solubility(ies)
Water solubility : partly miscible (20 °C)

Solubility in other solvents : No applicable information available.

Partition coefficient: n- : No data available

octanol/water

Autoignition temperature : No data available

Decomposition temperature : No decomposition if stored and handled as pre-

scribed/indicated.

Viscosity
Viscosity, dynamic : 340 mPa.s (approx. 20 °C)

Viscosity, kinematic : No applicable information available.

Explosive properties : Not explosive

6 / 11
SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

Oxidizing properties : not fire-propagating

Sublimation point : No applicable information available.

Molecular weight : No data available

Metal corrosion rate : No corrosive effect on metal.

SECTION 10. STABILITY AND REACTIVITY

Reactivity : No decomposition if stored and applied as directed.

Chemical stability : No decomposition if stored and applied as directed.

Possibility of hazardous reac- : No decomposition if stored and applied as directed.

tions

Conditions to avoid : See SDS section 7 - Handling and storage.

Incompatible materials : Oxidizing agents

strong alkalies
Acids

Hazardous decomposition : No hazardous decomposition products if stored and handled

products as prescribed/indicated.

SECTION 11. TOXICOLOGICAL INFORMATION

Acute toxicity
Harmful if inhaled.
Product:
Acute oral toxicity : Remarks: No applicable information available.

Acute inhalation toxicity : Remarks: No applicable information available.

Acute dermal toxicity : Remarks: No applicable information available.

Skin corrosion/irritation
Causes severe burns.
Serious eye damage/eye irritation
Causes serious eye damage.
Respiratory or skin sensitization

Skin sensitization
Not classified based on available information.
Respiratory sensitization
Not classified based on available information.

7 / 11
SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

Germ cell mutagenicity

Not classified based on available information.
Carcinogenicity
Not classified based on available information.
Reproductive toxicity
Not classified based on available information.
STOT-single exposure
May cause respiratory irritation.
STOT-repeated exposure
Not classified based on available information.
Aspiration toxicity
Not classified based on available information.
Further information

Product:
Remarks : The product has not been tested. The statement has been
derived from the properties of the individual components.

SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity

Product:

Ecotoxicology Assessment
Acute aquatic toxicity : This product has no known ecotoxicological effects.

Chronic aquatic toxicity : This product has no known ecotoxicological effects.

Persistence and degradability

No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects

Product:
Additional ecological infor- : There is a high probability that the product is not acutely
mation harmful to aquatic organisms.
The product has not been tested. The statements on ecotoxi-
cology have been derived from the properties of the individual
components.

Do not discharge product into the environment without control.

The product has not been tested. The statements on ecotoxi-

8 / 11
SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

cology have been derived from the properties of the individual

components.

SECTION 13. DISPOSAL CONSIDERATIONS

Disposal methods
Waste from residues : Observe national and local legal requirements.
Residues should be disposed of in the same manner as the
substance/product.

Do not contaminate ponds, waterways or ditches with chemi-

cal or used container.
Dispose of in accordance with national, state and local regula-
tions.
Do not discharge into drains/surface waters/groundwater.

Contaminated packaging : Contaminated packaging should be emptied as far as possi-

ble; then it can be passed on for recycling after being thor-
oughly cleaned.
Packs that cannot be cleaned should be disposed of in the
same manner as the contents.

Contaminated packaging should be emptied as far as possible

and disposed of in the same manner as the sub-
stance/product.

SECTION 14. TRANSPORT INFORMATION

International Regulations

UNRTDG
UN number : UN 2735
Proper shipping name : AMINES, LIQUID, CORROSIVE, N.O.S.
(2-DIMETHYLAMINOETHANOL)
Class : 8
Packing group : II
Labels : 8
IATA-DGR
UN/ID No. : UN 2735
Proper shipping name : Amines, liquid, corrosive, n.o.s.
(2-DIMETHYLAMINOETHANOL)
Class : 8
Packing group : II
Labels : Corrosives
Packing instruction (cargo : 855
aircraft)
Packing instruction (passen- : 851
ger aircraft)
IMDG-Code
UN number : UN 2735
Proper shipping name : AMINES, LIQUID, CORROSIVE, N.O.S.

9 / 11
SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

(2-DIMETHYLAMINOETHANOL)
Class : 8
Packing group : II
Labels : 8
EmS Code : F-A, S-B
Marine pollutant : no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable for product as supplied.
Domestic regulation

TDG
UN number : UN 2735
Proper shipping name : AMINES, LIQUID, CORROSIVE, N.O.S.

(2-DIMETHYLAMINOETHANOL)
Class : 8
Packing group : II
Labels : 8
ERG Code : 153
Marine pollutant : no

SECTION 15. REGULATORY INFORMATION

The ingredients of this product are reported in the following inventories:

TSCA : All substances listed as active on the TSCA inventory

DSL : All components of this product are on the Canadian DSL

Canadian lists
No substances are subject to a Significant New Activity Notification.

SECTION 16. OTHER INFORMATION

Full text of other abbreviations

AIIC - Australian Inventory of Industrial Chemicals; ANTT - National Agency for Transport by
Land of Brazil; ASTM - American Society for the Testing of Materials; bw - Body weight; CMR -
Carcinogen, Mutagen or Reproductive Toxicant; DIN - Standard of the German Institute for
Standardisation; DSL - Domestic Substances List (Canada); ECx - Concentration associated with
x% response; ELx - Loading rate associated with x% response; EmS - Emergency Schedule;
ENCS - Existing and New Chemical Substances (Japan); ErCx - Concentration associated with
x% growth rate response; ERG - Emergency Response Guide; GHS - Globally Harmonized Sys-
tem; GLP - Good Laboratory Practice; IARC - International Agency for Research on Cancer; IATA
- International Air Transport Association; IBC - International Code for the Construction and
Equipment of Ships carrying Dangerous Chemicals in Bulk; IC50 - Half maximal inhibitory con-
centration; ICAO - International Civil Aviation Organization; IECSC - Inventory of Existing Chemi-
cal Substances in China; IMDG - International Maritime Dangerous Goods; IMO - International
Maritime Organization; ISHL - Industrial Safety and Health Law (Japan); ISO - International Or-
ganisation for Standardization; KECI - Korea Existing Chemicals Inventory; LC50 - Lethal Con-

10 / 11
SAFETY DATA SHEET

MasterRoc MP 355 1K Accelerator

Version Revision Date: SDS Number: Date of last issue: 07/28/2023

3.0 08/15/2023 000000247497 Date of first issue: 01/09/2023

centration to 50 % of a test population; LD50 - Lethal Dose to 50% of a test population (Median
Lethal Dose); MARPOL - International Convention for the Prevention of Pollution from Ships;
n.o.s. - Not Otherwise Specified; Nch - Chilean Norm; NO(A)EC - No Observed (Adverse) Effect
Concentration; NO(A)EL - No Observed (Adverse) Effect Level; NOELR - No Observable Effect
Loading Rate; NOM - Official Mexican Norm; NTP - National Toxicology Program; NZIoC - New
Zealand Inventory of Chemicals; OECD - Organization for Economic Co-operation and Develop-
ment; OPPTS - Office of Chemical Safety and Pollution Prevention; PBT - Persistent, Bioaccumu-
lative and Toxic substance; PICCS - Philippines Inventory of Chemicals and Chemical Substanc-
es; (Q)SAR - (Quantitative) Structure Activity Relationship; REACH - Regulation (EC) No
1907/2006 of the European Parliament and of the Council concerning the Registration, Evalua-
tion, Authorisation and Restriction of Chemicals; SADT - Self-Accelerating Decomposition Tem-
perature; SDS - Safety Data Sheet; TCSI - Taiwan Chemical Substance Inventory; TDG - Trans-
portation of Dangerous Goods; TECI - Thailand Existing Chemicals Inventory; TSCA - Toxic Sub-
stances Control Act (United States); UN - United Nations; UNRTDG - United Nations Recom-
mendations on the Transport of Dangerous Goods; vPvB - Very Persistent and Very Bioaccumu-
lative; WHMIS - Workplace Hazardous Materials Information System

Revision Date : 08/15/2023

Date format : mm/dd/yyyy

The information provided in this Safety Data Sheet is correct to the best of our knowledge, infor-
mation and belief at the date of its publication. The information given is designed only as a guid-
ance for safe handling, use, processing, storage, transportation, disposal and release and is not
to be considered a warranty or quality specification. The information relates only to the specific
material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.

CA / EN

11 / 11