Tiro Al Blanco Toy Story

Bullseye (Toy Story). Crochet Pattern.
By Pichugina Elena.
I draw your attention that this pattern is the property of Pichugina Elena and intended for personal use only.
You may not sell it or distribute it.
Please make reference to the author when placing your work done according to the pattern in the Internet.
Materials:
1) Acrylic (300 meters/100 gr) – brown, dark-brown, white, beige
2) Acrylic paint – black
3) Hook 2.0 mm
4) Thin and thick wire
5) PVA glue
6) Padding polyester
Dimensions of finished toys:

Height is 18 cm, length is 19 cm
Legend and used stitches:

Amigurumi ring – make double adjustable ring
Ch - chain
Sl st – slip stitch
Sc – single crochet
Hdc – half double crochet
Dc – double crochet
(24) - the number of stitches in a crocheted round (row)
"Dec" – decrease – crochet two stitches of the previous round (row) together
"Inc" – increase – crochet two stitches into one stitch of the previous round (row)
"Unchanged" - crochet one stitch in each stitch of the previous round
(1 Sc, 1 Inc) rep 6 times – repeat rapport 6 times
Bullseye. Crochet Pattern. Pichugina Elena

Head:
Crochet brown and white thread circular.
Start to crochet with brown thread.
1 round – amigurumi ring, 6 Sc (6)
2 round – 6 Inc (12)
3 round – (1 Sc, 1 Inc) rep 6 times (18)
6 – 9 rounds – Unchanged (30)
10 round – (4 Sc, 1 Dec) rep 5 times (25)
11 round – Unchanged (25)
Change thread on white.
Finish crochet, fill the head of padding polyester tightly, sew up the hole.
Labrum:
Crochet beige thread row.
1 row – cast on 2 Chs, crochet 3 Sc in the second loop from the hook, do not close to the ring. Turn the crochet
wrong side.
2 row – 3 Inc (6), turn the crochet front side
3 row – (1 Sc, 1 Inc) rep 3 times (9), turn the crochet wrong side
4 row – (2 Sc, 1 Inc) rep 3 times (12), turn the crochet front side
5 – 6 rows – 12 Sc (12).
Break off yarn, leaving a long end for sewing to the head

Sew the labrum as shown in a picture
Lower lip:
Crochet beige thread row.
1 row – cast on 2 Chs, crochet 3 Sc in the second loop from the hook, do not close to the ring. Turn the crochet
wrong side.
2 row – 3 Inc (6), turn the crochet front side
3 row – (1 Sc, 1 Inc) rep 3 times (9), turn the crochet wrong side
4 row – 9 Sc (9).
Break off yarn, leaving a long end for sewing to the head. Sew the lip.
Ears (2 pieces):
Crochet brown thread circular.
2 round – 1 Inc, 1 Sc, 1 Inc, 1 Sc, 1 Inc (8)
3 – 4 rounds – Unchanged (8).
Break off yarn, leaving a long end for sewing to the head. Sew ears to the head.

Nostrils (2 pieces):
Cast on 4 Chs with beige thread and sew it on the nose.
Legs (4 Pieces): each leg consists of 3 details

Prepare 2 segments of thin wire of 70 cm, folded it three times and curl up – these are frames of the legs.
First detail. Top part of the leg

Crochet brown thread. Cast on 6 Chs, close to the ring and crochet circular.
6 round – (2 Sc, 1 Dec) rep 2 times (6).
Break off yarn, leaving a long end for sewing.
Second detail. Middle part of the leg

1 round – 8 Sc (8)
Third detail. Shoes

Crochet dark-brown and white threads circular.
Start to crochet with dark-brown thread.
1 round – cast on 6 Chs, 4 Sc beginning from the second loop from the hook, 3 Sc in the last loop of chain, turn the
crochet clockwise, 3 Sc, 2 Sc in the last loop of round (12)
3 round – 1 Sc, 1 Inc, 3 Sc, (1 Sc, 1 Inc) rep 3 times, 3 Sc, (1 Sc, 1 Inc) rep 2 times (24)
4 round – 24 Sc back loop only (24)
5 round – 24 Sc (24)
6 round – 8 Sc, 4 Dec, 8 Sc (20)
7 round – 8 Sc, 2 Dec, 8 Sc (18).
Change thread on white.
8 round – 18 Sc back loop only (18)
10 round – 12 Sc (12)

Body:
Crochet brown thread circular.
2 round – 6 Inc (12)
Stop crochet and thrust one wire frame in the crocheted body. Make it in the 9th round, as shown in a picture.
Put first top part of the leg on the wire and sew it to the body, fill of padding polyester tightly.
Then put the second middle part on the wire and sew it to the top part. Fill it of padding polyester tightly too.
Bend the end of wire as shown in a picture, put shoe on it, fill of padding polyester tightly and sew shoe to the
middle detail.

Thrust second wire frame in the 24th round of the body and make forelegs similarly.
Fill the crocheted body detail of padding polyester tightly and continue to crochet the body.
29 round – 6 Dec (6).
Finish crochet, fill the body of padding polyester tightly, sew up the hole.

Neck:
1 – 6 rounds – 18 Sc (18)
Break off yarn, leaving a long end for sewing. Sew the neck to the body, fill it of padding polyester.
Sew the head to the neck.
Saddle: consists of three parts
First detail. Crochet dark-brown thread circular.

1 round – cast on 8 Chs, 6 Sc beginning from the second loop from the hook, 3 Sc in the last loop of chain, turn the
crochet clockwise, 5 Sc, 2 Sc in the last loop of round (16)
6 round – crochet crab stitch in each stitch of previous round.

Second detail (2 pieces).
Bend two stirrup details of thick wire.
Crochet 5 Sc in the top part of stirrup, turn the crochet wrong side and crochet 5 Sc again. Crochet 12 rows in this
way.
Sew stirrups to the saddle. Sew saddle to the horse’s back.
Mane:
Crochet dark-brown thread row.
1 row – cast on 13 Chs, crochet from the second loop from the hook: 3 Sc, 2 Hdc, 2 Dc, 2 Hdc, 3 Sc, turn the crochet
wrong side
2 row – skip 1 stitch of previous row, 1 Sc, 1 Inc with Sc, 2 Hdc, 2 Inc with Dc, 2 Hdc, 1 Inc with Sc, 1 Sl st, turn the
crochet front side.
3 row – cast on 5 Chs, crochet from the second loop from the hook: 1 Sl st, 1 Sc, 1 Hdc, 1 Dc, crochet 1 Sl st in the
second loop of previos row – it must be first “topknot”, crochet 1 Sl st in the next loop of previous row and cast on 5
Chs again for the second “topknot”. Crochet it similarly. As a result you must have 7 “topknots” .

Tail:
Crochet dark-brown thread row.
1 row – cast on 11 Chs, crochet from the second loop from the hook: 1 Sl st, 2 Sc, 1 Dec, 2 Sc, 1 Dec, 1 Sc, turn the
crochet wrong side
2 row – 3 Hdc, 3 Sc, cast on 8 Chs
3 row – crochet from the second loop from the hook: 1 Sl st, 9 Sc, 3 Hdc
4 row – 2 Sc, 1 Dec, 2 Sc, 1 Dec, 3 Sc, cast on 3 Chs
5 row - crochet from the second loop from the hook: 1 Sl st, 7 Sc, 3 Hdc
6 row – 3 Hdc, 3 Sc, cast on 2 Chs
7 row - crochet from the second loop from the hook 1 Sl st, 2 Sc, 1 Dec, 2 Sc.
Put the tail and mane on a flat, clean surface and smear it PVA glue diluted with water 1:1. Let them to dry.
Sew the mane and tail.
Eyes (2 pieces):
Crochet white thread circular.
1 round – amigurumi ring, crochet in the second loop from the hook 4 Sc, 2 Hdc, 1 Dc, 2 Hdc (9).
Break off yarn, leaving a long end for sewing. Sew the eyes and paint eyes and eyebrows with black acrylic.
Your Bullseye is ready!
I wish you every success!


Tiro Al Blanco Toy Story

Uploaded by

Copyright:

Available Formats

Tiro Al Blanco Toy Story

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tiro Al Blanco Toy Story

Uploaded by

Copyright:

Available Formats

Bullseye (Toy Story). Crochet Pattern.

Dimensions of finished toys:

Legend and used stitches:

Bullseye. Crochet Pattern. Pichugina Elena

Bullseye. Crochet Pattern. Pichugina Elena

Bullseye. Crochet Pattern. Pichugina Elena

Legs (4 Pieces): each leg consists of 3 details

First detail. Top part of the leg

Second detail. Middle part of the leg

Third detail. Shoes

Bullseye. Crochet Pattern. Pichugina Elena

Bullseye. Crochet Pattern. Pichugina Elena

Bullseye. Crochet Pattern. Pichugina Elena

Sew the head to the neck.

Saddle: consists of three parts

First detail. Crochet dark-brown thread circular.

Bullseye. Crochet Pattern. Pichugina Elena

Sew stirrups to the saddle. Sew saddle to the horse’s back.

Bullseye. Crochet Pattern. Pichugina Elena

Sew the mane and tail.

Your Bullseye is ready!

I wish you every success!

You might also like