Easer E10 S

Mobile raiseboring machine for

medium to large size drifts

1
Versatile Integrated muck chute

­raiseboring rig
Designed to drill opening holes in block cave, sub level caving and sub level
stoping mines, this versatile raiseboring rig can also be used for precondition
holes, pastefill tube holes and media holes. The rig works in drifts from
5.0x5.0 to 6.0x6.0 m. When drilling with a 750 mm diameter reamer, the
Easer E10 S can drill conventional holes up to 200 m and box holes and down
reaming holes up to 60 m. The Easer E10 S has the capability to drill angled
holes in any direction with a minimum range of 90°–60° from horizontal.

Main benefits Remote controlled crane

for easy pipe handling

High versatility with both upwards and downwards

drilling, but without the need of a concrete platform

High productivity with significantly less risk of "freezing"

the ground thanks to the large diameter of the drill hole

High accuracy with less than 1% hole deviation thanks to

the mechanical rock excavation method
Hydraulic
wrenching system

Optional battery-electric
driveline

Mine adapted carrier with

articulated steering, four wheel
drive and low emission turbo
charged diesel engine

S – Smart SG – Smart and Green

Machines within the Smart series are equipped with Smart and Green means that machines feature
Epiroc's Rig Control System, RCS, which makes them both Epiroc's Rig Control System and zero-emission
ready for automation and remote control. technologies.

2
 Technical specifications  = Standard  = Option
A = Easer E10 S B = Easer E10 SG

As easy as that Features Electrical system

Total installed power 173 kW
A

B

Rotation system Main motors
The name Easer is derived from the expression “ease off”, meaning to take off or release • Radial piston motor - Rotation 110 kW  
- Aux circuit 55 kW
pressure, which is used in reference to the blast hole into which rock expands during blasting. • Hydrostatic drive system Voltage 400-1 000 V  
• Gear box ratio 3.75:1 Frequency 50 or 60 Hz  
Drive head Power requirement 227 kVA  
• Floating drive box with DI22 thread Starting method
- Rotation motor Star Delta (Y/D) start  
• Position sensor and gauge - Aux motor Direct Online (DOL) start
+ Safety Gearbox lubrication Transformer 8 kVA  
The Easer is designed to keep a high level of safety, one example of that is the • Standalone lubrication system 55 l Extra transformer 3-phase -15kVA (230/400V outlet)  
radio remote crane installed to handle drill pipes. No manual labor is required • Filtration 16 microns Electronic overload protection for electric motors  
with the drill pipes, stabilizers or the reamer. All moving and lifting is done with • Oil cooled via hydraulic system Digital volt/ampere meter in electrical cabinet  
the crane within an area of 4 meters radius. Stainless steel electrical enclosure (A-cabinet)  
Pipeloader
Phase fault indicator  
• Swing in/out
Earth fault relay  
Crane Battery charger  
• Lifting capacity 1 300 kg Cable reel with limiting switch  

+ Epiroc RCS • Gripper arm Electrical cable  

• Radio remote control Plug  
As early as 1998, Epiroc introduced its Rig Control System (RCS) – a
• Built in overload protection Connector  
computerized control system for drilling rigs that stunned the market. More than
Wrench system Socket  
3 000 RCS rigs are currently in operation the world over. Long experience and
Switch gear  
an ongoing dialogue with customers have resulted in increasingly sophisticated • Drive head
functions – with expertise that makes Epiroc uniquely qualified to drive - Semi automatic Transformer for charging 
• Work table 700V battery 
development in the industry.
- Sliding work table doors Lube tank heater  
Stingers Offline hydraulic oil filter  

• Roof stingers Standard/low derrick (1400/1400)

+ Versatility
• Floor stingers Standard/low derrick (1300/1050)
No site preparation is necessary, and all equipment except the drill rods, are part Carrier A B
Muck chute
of the carrier. In addition, and most importantly, Easer is wheel-bound, making it Deutz TCD 2012 L06, Stage IIIA/Tier 3, 155 kW 
• Extension 800 mm
exeptionally easy to move to wherever it is needed in the mine. Deutz TCD 6.1 L06, Stage V/Tier 4F, 180 kW 
• Water nozzles
Deutz TCD6.1 L06, CNIV, 180 kW 
Electric traction motor (150 kW) 
Control system A B Engine heater 
Epiroc Rig Control System (RCS 5)   Articulated ±38° steering angle  
Angle reading   Heater for hydraulic oil tank, electrical motors and diesel engine  
Auto make up log   Four wheel drive  
Net force control   Electrical system 24 V  
Bailing pressure supervision   Batteries 2x125 Ah  

A comprehensive Rig Remote Access (RRA)

Remote controlled camera on tripod with monitor in cabin





Automatic differential lock on front axle, limited slip

Tyres, 14.00 R24 (filled with liquid)






service offering Certiq professional

Total station navigation





Tramming light

Working lights + spotlights on crane





Area guard   Fuel tank volume 165 l 
Even the best equipment needs to be
Additional control panel   Central lubrication system  
serviced regularly to make sure it sustains
Fire extinguisher  
peak performance. An Epiroc service
Fire suppression system  
solution offers peace of mind, maximizing
Rig alignment laser  
availability and performance throughout Water system A B
the lifetime of your equipment. We focus Water booster pump on board  
on safety, productivity and reliability. Water pressure gauge  
Water hose reel, including water hose  
By combining genuine parts and an Epiroc High pressure washer  
service from our certified technicians, we Low pressure washer  
safeguard your productivity – wherever Water cannon  
you are. Boot washing kit  

4 5
  = Standard  = Option
Technical specifications A = Easer E10 S B = Easer E10 SG Technical specifications
Performance Easer E10 S standard and low configuration
Boxhole ø 750 mm
Raise diameter Down reaming ø 750 mm
Conventional drilling ø 750-1 500 mm
Boxhole 60 m
Raise length Down reaming 60 m
Conventional drilling 250 m (750 mm raise diameter) to 30 m (1 500 mm raise diameter)
Reaming 40 kNm
Maximum torque Break out 50 kNm

Whithout flexing seal – 4 840/4 370

Pilot 20 kNm

Flexing seal – 4 950/4 330

Traverse rate 2 m/min

4 910/4 320

5 110/4 520
Stroke (Standard/low derrick) 1 724 mm/1 432 mm

EASER
Reaming thrust at 330 bar 750 kN
Bailing water 400 l/min at 25 bar
Cooling water 60 l/min at 25° C
Minimum water inlet pressure 2 bar
E10 S

Weight A B Recommended cable sizes and lengths

Gross weight 37 500 kg 39 200 kg 400 V 185 mm2 90 m
Operating weight 37 400 kg 39 100 kg 690 V 95 mm2 150 m

Front shaft 27 200 kg 27 200 kg 1 000 V 70 mm2 180 m

Rear shaft 10 400 kg 12 100 kg Recommendations are given for surrounding temperature of 40°C.

Cabin A B Dimensions
Cabin body made of stainless steel Width 2 650 mm

EASER
 

3 630/3 530
AC unit   Height tramming (Standard/low derrick) 3 630 mm/3 529 mm

3 090
Front window 22 mm Length tramming (Standard/low derrick) 11 701 mm/12 024 mm
 
Ground clearence 200 mm
Heating function for air condition (water transferred)  
Turning radius inner/outer 4 800/8 000 mm E10 S
Joystick controlled spotlights kit (left and right side)  
Diameter 203 mm (8")
Reversing camera with monitor  

13°

13°
Drill pipe Length (Standard/low derrick) 1 219 mm/914 mm (48"/36")
Protection bars, front window  
Thread 6-3/4” DI22
4 200
Electrical heater (230 V)  
Pilot hole diameter 229 mm (9")
Swingable seat   11 700/ 12 030

Fixed seat  
Media player  

R 8 000
Miscellaneous options A B Drift size

38°
Bit breaker box 9”   Width 5m
Standard derrick
Height 5m

3 300
Starter bushing  
Width 5m

2 526
Automatic lubrication for drilling and positioning unit   Low derrick
Stinger extensions Height 4,5 m
 
Blooie seal  
Makeup & Breakout Tool (MBT)  

R 4 700

6 7
 9869 0221 01a 2024-01 Örebro, Örebro, Sweden. Legal Notice © Copyright 2024, Epiroc Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Epiroc. Any unauthorized use or copying of the
contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change
without notice. Consult your Epiroc Customer Center for specific information.

epiroc.com
commitment drives us to keep moving forward.
Performance unites us, innovation inspires us, and

Count on Epiroc to deliver the solutions you need to

Inspired by innovation.

succeed today and the technology to lead tomorrow.

United in performance.