DN 61053
DN 61053
DN 61053
General
The NOTIFIER FSV-951R VIEW is a high-sensitivity photoelectric
smoke detector designed for Very Early Warning Fire Detection and
will protect valuable assets and operations where systems must
remain functioning at all times.
FSV-951R VIEW detector features a smoke-sensing chamber and
patented optic block designed to amplify signals from smoke, but
diminish stray internal reflections that can cause false alarms. New
LED technology allows this detector to achieve sensitivity levels
from 0.02 percent-per-foot to 2 percent-per-foot obscuration – up to
25 times greater than a standard photoelectric detector. The exten-
sive software processing includes multi-alert drift compensation,
internal self-diagnostics, and superior transient signal rejection algo-
rithms to produce unprecedented stability at ultra-high sensitivities
across the full temperature range. This system provides point identi-
fication of the fire location through addressability and offers com-
plete supervision of both the wiring and detector.
FSV-951R in B300-6 Base
The VIEW detector is UL-listed and complies with the following UL
standards; Canadian models comply with CAN/ULC S529:
• UL 268 listed for Open Air Protection (0.5%/ft. to 2.0%/ft. obscu- Specifications
ration)
PHYSICAL/OPERATING SPECIFICATIONS
• UL 268 listed for Special Applications (0.02%/ft. to 0.5%/ft. obscu-
• Dimensions:
ration)
Height: 2.0 inches (51 mm) installed in B300-6/-IV base
• UL 268A listed for Duct Applications allowing both in duct and Diameter: 6.2 inches (156 mm) installed in B300-6/-IV base;
within System Sensor models DNR and DNRW duct smoke 4.1 inches (104 mm) installed in B501-WHITE/-IV/-BL base
detectors
• Weight: 3.4 oz (95 g)
In addition, the new modern profile blends seamlessly with other 900
• Operating Temperature Range: 14 °F to 140 °F (-10 °C to 60 °C)
series detectors, which offer expanded color options to meet con-
temporary aesthetic demands. • Operating Humidity Range: 10% to 93% relative humidity, non-
condensing
VIEW is the ideal detection solution for sensitive environments that
cannot tolerate even small amounts of smoke: • Air Velocity: 0 to 4,000 fpm (0 to 1219 m/minute)
• Isolator Load Rating: 0.0063*
• Telecommunications switching facilities
• Self Diagnostics: Initiated by control panel; activated by test
• Cellular telephone infrastructure
magnet
• Integrated circuit fabrication facilities
• Smoke Sensitivity:
• Computer rooms 9 levels: 0.02, 0.03, 0.05, 0.10, 0.20, 0.50, 1.00, 1.50, 2.00%/ft.
• Traffic control centers obscuration (0.06, 0.10, 0.16, 0.33, 0.66, 1.65, 3.24, 4.85, 6.41%/m
• Data Centers obscuration)
• Drift Compensation:
Features High sensitivity maintenance alert signal
Low sensitivity maintenance alert signal
• Superior EMI protection Maintenance urgent signal
• Very Early Warning Fire Detection capability
ELECTRICAL SPECIFICATIONS
• Analog communications
• Operating Voltage Range: 15 to 32 VDC
• Low standby current
• Operating Current @ 24 VDC: 300 μA (one communication every
• Rotary address switches 5 seconds with green LED blink on communication)
• 360° visibility of device status with dual LEDs • Maximum Current: 4.5 mA @ 24 VDC (one communication every
• On-board drift compensation 5 seconds with amber LED solid on)
• Transient rejection algorithms • Maximum Alarm Current: 2 mA @ 24 VDC (one communication
• Microprocessor design every 5 seconds with red LED solid on)
• FlashScan® or CLIP protocol communications
• New modern profile with expanded color options