Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    Saclarin Mekanik Ozellikleri

    Uploaded by

    Salih Tuğrul Sarı

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Saclarin Mekanik Ozellikleri

    Uploaded by

    Salih Tuğrul Sarı
    6 views3 pages

    Original Title

    saclarin-mekanik-ozellikleri

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views3 pages

    Saclarin Mekanik Ozellikleri

    Uploaded by

    Salih Tuğrul Sarı

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    SAC

    Sıcak Haddelenmiş Rulo Sacların Kimyasal Bileşimleri ve Mekanik Özellikleri

    Mechanical Properties Fiziksel Özellikler


    Chemical Compositioni, in %
    Maximum Lable Analysis Tensile
    Deoxidation
    " Strength
    Specification Grade Type Yield Point
    Kimyasal Bileşim, % Maximum Çekme Elongation, % min.Long./Transverse
    Akma
    Dayanımı Uzama, min. % Uzunlamasına/Enine
    Standartlar Sınıf Oksijen Olarak Pota Analizi Dayanımı
    <3 mm
    Giderme
    >=3mm
    C Mn P S Si N N/mm2 N/mm2 N/mm2(min) >=0.5<1 >=1<1.5 >=1.5<2 >=2<2.5 >=2.5<3 >=3<=40
    310- 290-
    St 33 optional - - - - - 185 10/8 11/9 12/10 13/11 14/12 18/16
    540 510
    ST 37-
    optional 0.17 - 0.050 0.050 - 0.009
    2
    USt
    U 0.17 0.050 0.050 - 0.007
    37-2 360- 340-
    235 17/15 18/16 19/17 20/18 21/19 26/24
    RSt 37- 510 370
    DIN 17100 R 0.17 - 0.050 0.050 - 0009
    2
    St 37-3 RR 0.17 - 0.040 0.040 - -

    St 44-2 R 0.21 - 0.050 0.050 - 0.009


    430- 410-
    275 14/12 15/13 16/14 17/15 18/16 22/20
    580 540
    St 44-3 RR 0.20 - 0.040 0.040 -

    C Mn P S Si N N/mm2 N/mm2 N/mm2(min)

    S235JR FN 0.17 1.40 0.040 0.040 - 0.012


    360- 360-
    S235J0 FN 0 17 1.40 0.035 0.035 - 0.012 235 17/15 18/16 19/17 20/18 21/19 26/24
    510 510
    EN 10025
    S235J2 FF 0.17 1.40 0.030 0.030 - -
    430- 410-
    S275JR FN 0.21 1.50 0.040 0.040 - 0.012 275 15/13 16/14 17/15 18/16 19/17 23/21
    580 560
    S275J0 FN 0.18 1.50 0.035 0.035 - 0.012

    S275J2 FF 0.18 1.50 0.030 0.030 - -


    N/mm2
    C Mn P S Si N N/mm2 N/mm2 Elongation %min Uzama
    (min)
    1110 - 0.10 0.50 0.025 0.025 0.100 - - - -
    310- 290-
    3233 - 0.12 1.20 0.025 0.020 0.40 - 185 11 11 11 11 12 16
    540 510
    360- 340-
    3237 - 017 1.00 0.025 0.020 0.40 0.012 235 18 18 18 18 19 24
    510 470
    ERDEMIR
    2009 - 0.10 0.70 0.025 0.030 0.30 - min 330 205 22-35
    0.06- 0.35- 0.15-
    2008 - 0.025 0.020 - min 330 205 31
    0.12 0.60 0.30
    0.40- 0.10-
    2237 - 0.12 0.020 0.020 - 360-480 235 27
    0.80 0.30
    N/mm2
    C Mn P S Si N N/mm2 Elongation %min Uzama
    (max)
    DC01 optional 0.12 0.60 0.045 0.045 - - 270-410 280 28

    DC03 FF 0.10 0.45 0.035 0.035 - - 270-370 240 34


    EN10130
    DC04 FF 0.08 0.40 0.030 0.030 - - 270-350 210 38

    DC05 FF 0.06 0.35 0.025 0.025 - - 270-330 180 40

    N/mm2
    C Mn P S Si N N/mm2 Elongation % Uzama
    (min)

    GrA - 0.25 0.95 0.050 0.060 - - min 330 205 22-35


    ASTM A 53
    GrB - 0.30 1.20 0.050 0.060 - - min 415 240 18-28

    N/mm2
    C Mn P S Si N N/mm2 Elongation % Uzama
    (min)
    A25 0.21 0.60 0.030 0.030 - - min 310 172 24-36

    A - 0.22 0.90 0.030 0.030 - - min 331 207 22-35


    API 5L
    B - 0.28 1.20 0.030 0.030 - - min 414 241 20-28

    X42 - 0.28 1.30 0.030 0.030 - - min 414 290 20-28

    DEOXIDATION TYPES
    Oksijen Giderme
    DIN 17100
    U: Rimming
    R: Killed
    RR : Special Killed
    EN 10 025
    FU : Rimming
    Rimming Not
    FN :
    Permitted
    FF : Fully Killed

    You might also like