T-Mobile

Approved Mounts
2024
 Our Convenient Nationwide Locations

New York Georgia California

15 Oser Ave 4100 Westpark Dr SW, Ste C 12661 Corral Pl
Hauppauge, NY 11788 Atlanta, GA 30336 Santa Fe Springs, CA 90670

Ph: 1-888-438-7761 Ph: 1-866-901-0603 Ph: 1-888-776-1937

Indiana West Florida Maryland

1545 Pidco Dr 5122 Joanne Kearney Blvd 8200 Stayton Drive, Ste 700
Plymouth, IN 46563 Tampa, FL 33619 Jessup, MD 20794

Ph: 1-888-753-7446 Ph: 1-844-278-6371 Ph: 1-888-438-7761

Oregon Texas South Florida

3573 25th St SE 2045 Westgate Dr, Ste 110 33 Commerce Way
Salem, OR 97302 Carrollton, TX 75006 Jupiter, FL 33458

Ph: 1-888-880-9191 Ph: 1-888-809-5151 Ph: 1-866-781-1300

Nevada Colorado
960 E Greg St. Buildingg 6 14200 E 35th Pl Ste 105
Sparks, NV 89431 Aurora, CO 80011

Ph: 1-888-438-7761 Ph: 1-720-823-7661

We’re the backbone of the wireless industry.
Serving wireless carriers, contractors, and integrators for nearly two decades,
we are telecom’s premier manufacturer and distributor of wireless site
Valmont Telecom Locations
components.
INDIANA OREGON NEBRASKA
Our nationwide warehouses are fully stocked and strategically located around
Plymouth, IN Salem, OR Valley, NE
the U.S. to facilitate the immediate shipment of your order. With the addition of
our latest locations, we reach 99% of the U.S. within a single day.
TEXAS ARIZONA COLORADO
Everything we do is with our customers in mind, and providing an optimal Brenham, TX Tucson, AZ Colorado Springs, CO
experience is our top priority. Whether purchasing through our knowledgeable
customer service team or our fast and secure website online, we guarantee
that you will have a first-class experience.

Shop online at SitePro1.com

T-Mobile Approved V-Frames
SD V-Frame
Description:
• Features our BCAM™ Taper Adjustment System (see below)
• Features our Quick-Plate™ for easy grounding and addition of RRU Mounting pipes or Unistrut
• Round-member face offers lower wind resistance
• Frames rotate for easy azimuth adjustment
• Includes Stiff Arm and hardware to mount 2-3/8” Antenna Mounting Pipes (ordered separately)

Features:
BCAM™ Taper Adjustment System Quick-Plate ™ Grounding &
RRU Pipe Mount

Order Antenna Mounting

Pipes separately • Easily adjust the taper of a fully loaded frame while • Integrated plates accommodate up to
mounted to the tower with a battery operated eight lugs per plate for grounding (there
impact gun by tightening or loosening one nut are four plates per V-Frame)
• Infinitely adjustable from –2.5 to 6 degrees • Slotted holes allow attachment of
2-3/8” - 4-1/2” OD pipes to support
RRU’s (Pipe and U-Bolts purchased
separately)
Hardware to Mount Stiff • The 3/8” holes can also be used to
Part # Face Width Leg Sizes Weight
(X) Antennas Arms attach Unistrut to the frame
VFA6-SD-S 7'-0" 2 1 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 360 lb

VFA6-SD 7'-0" 2 2 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 450 lb

VFA8-SD-S 9'-0" 3 1 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 390 lb

VFA8-SD 9'-0" 3 2 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 480 lb

VFA10-SD-S 10'-6" 4 1 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 415 lb

VFA10-SD 10'-6" 4 2 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 505 lb

VFA12-SD-S 12'-6" 4 1 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 430 lb

VFA12-SD 12'-6" 4 2 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 520 lb

VFA14-SD-S 14'-6" 4 1 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 445 lb

VFA14-SD 14'-6" 4 2 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 535 lb

BCAM-SDLL Large-Leg Adapter Kit, up to 16" Round Legs, #12 Breakdowns Legs, and 11" Angles 114 lb

2
SitePro1.com • 1-888-438-7761
T-Mobile Approved V-Frames
Heavy-Duty V-Frame
Description:
• Our most robust Sector Frame designed for the most extreme loading conditions
• Features our BCAM™ Taper Adjustment System (see below)
• Features our Quick-Plate™ for easy grounding and addition of RRU Mounting pipes or Unistrut
• Includes Two Stiff Arms and hardware to mount 2-3/8” and 2-7/8” Antenna Mounting Pipes
(ordered separately)
• Frame rotates for easy azimuth adjustment

Features:
BCAM™ Taper Adjustment System

Order Antenna Mounting

Pipes separately

• Easily adjust the taper of a fully loaded

frame while mounted to the tower with a
battery operated impact gun by tightening
or loosening one nut
Hardware to Mount Stiff • Infinitely adjustable from –2.5 to 6 degrees
Part # Face Width Leg Sizes Weight
(X) Antennas Arms
VFA6-HD-S 7'-0" 2 1 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 540 lb

VFA6-HD 7'-0" 2 2 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 630 lb Quick-Plate ™ Grounding &
VFA8-HD-S 9'-0" 3 1 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 585 lb RRU Pipe Mount
VFA8-HD 9'-0" 3 2 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 675 lb

VFA10-HD-S 10'-6" 4 1 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 630 lb

VFA10-HD 10'-6" 4 2 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 715 lb

VFA12-HD-S 12'-6" 4 1 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 650 lb
• Integrated plates accommodate up to eight
VFA12-HD 12'-6" 4 2 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 735 lb lugs per plate for grounding (there are four
plates per V-Frame)
VFA12-HD-TM1 12’-6” 4 2 (150”) 1-1/2” to 9-1/2” Round Legs and 3” to 6” Angles 783 lb • Slotted holes allow attachment of 2-3/8” -
VFA14-HD-S 14'-6" 4 1 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 670 lb 4-1/2” OD pipes to support RRU’s (Pipe and
U-Bolts purchased separately)
VFA14-HD 14'-6" 4 2 1-1/2" to 9-1/2" Round Legs and 3" to 6" Angles 755 lb • The 3/8” holes can also be used to attach
Unistrut to the frame
BCAM-HDLL Large-Leg Adapter Kit, up to 16" Round Legs, #12 Breakdowns Legs, and 11" Angles 130 lb

3
SitePro1.com • 1-888-438-7761
T-Mobile Approved T-Arms
Monopole Sector Frame Attachment Assemblies
Description:
• Allow attachment of sector frames to a monopole using 4-1/2” mounting pipes
• Kits include two Ring Mounts, 4-1/2” OD Mounting Pipes, and hardware

MSFAA

MSFAA-Q

Part # Description Pole Sizes Weight

MSFAA Sector Frame Attachment Assembly (3 sector) 12” - 45” 790 lb

MSFAA-L Sector Frame Attachment Assembly Large (3 sector) 45” - 60” 995 lb

MSFAA-Q Sector Frame Attachment Assembly (4 sector) 12” – 60” 1,110 lb

4
SitePro1.com • 1-888-438-7761
T-Mobile Approved Reinforcement Kits
V-Style Sector Frame Stabilizer Kits (Pipe)
Description:
• Provide additional support to existing sector frames
• Pipe bracing for reduced wind area
• Fit 2-3/8” or 2-7/8” OD crossarms
• For VSK-TH and VSK-TH-L, based on design criteria noted in capacity letter, the maximum
additional normal load capacity gained is 1,050 lb, the maximum additional tangential load capacity
gained is 300 lb, and the maximum additional dead load capacity is 0 lb
• For VSK-TV and VSK-TV-L, based on design criteria noted in capacity letter, the maximum
additional normal load capacity gained is 0 lb, the maximum additional tangential load capacity
gained is 300 lb, and the maximum additional dead load capacity is 1,500 lb
• Universal mounting; round legs from 1” to 8”, 60° angle legs from 1-1/2” to 8”,
and 90° angles 1-1/2” to 6”
• Large-Leg Adapter Kit available for round legs up the 12-3/4”, 60° angle legs up to 12”,
and 90° angle legs up to 8-1/2”
• Contact us for load and engineering data

Part # Stabilizer Application Weight

VSK-TH Horizontal 24” to 36” Standoff 100 lb

VSK-TH-L Horizontal 36” to 48” Standoff 120 lb

VSK-TV Vertical 24” to 36” Standoff 100 lb

VSK-TV-L Vertical 36” to 48” Standoff 120 lb

TAM-LL Large Leg Adapter Kit 39 lb

5
SitePro1.com • 1-888-438-7761
T-Mobile Approved Reinforcement Kits
V-Style Sector Frame Reinforcement Kits (Pipe)
Description:
• Universal design provides extra capacity to existing sector
frames for mounting RRU’s
• Provide both vertical and horizontal reinforcement
• Pipe bracing for reduced wind area
• Fit 2-3/8” or 2-7/8” OD crossarms
• The maximum additional normal load capacity gained is 1,200 lb,
the maximum additional tangential load capacity gained is 400 lb,
and the maximum additional dead load capacity gained is 1,500 lb
• Universal mounting; round legs from 1” to 8”, 60° angle legs from
1-1/2” to 8”, and 90° angle legs from 1-1/2” to 6”
• Large-Leg Adapter Kit available for round legs up to 12-3/4”, 60° angle legs up to 12”,
and 90° angle legs up to 8-1/2”
• Contact us for detailed load and engineering data

Part # Face Width Application Weight

VSK-SFR 12’ - 6” 24” to 36” Standoff 185 lb

VSK-SFR-L 12’ - 6” 36” to 48” Standoff 205 lb

TAM-LL Large Leg Adapter Kit 39 lb

6
SitePro1.com • 1-888-438-7761
T-Mobile Approved Reinforcement Kits
Horizontal and Vertical Reinforcement Kits
Description:
SFS-V • Universal single-level Reinforcement Kits provide additional horizontal or vertical support to
existing Sector Frames
• For SFS-H and SFS-H-L, based on design criteria noted in capacity letter, the maximum additional
normal load capacity gained is 1,050 lb, the maximum additional tangential load capacity gained
is 300 lb, and the maximum additional dead load capacity is 0 lb
• For SFS-V and SFS-V-L, based on design criteria noted in capacity letter, the maximum additional
normal load capacity gained is 0 lb, the maximum additional tangential load capacity gained is
300 lb, and the maximum additional dead load capacity is 1,500 lb
• Universal mounting; round legs from 1” to 8”, 60° angle legs from 1-1/2” to 8”,
and 90° angles 1-1/2” to 6”
• Large Leg Adapter Kit available for round legs up to 12-3/4”, 60° angle legs up to 12”,
and 90° angle legs up to 8-1/2”
• Angle brace size is 2-1/2” x 2-1/2” x 3/16”
SFS-H

Part # Stabilizer Application Weight

SFS-H Horizontal 24" to 36" Standoff 66 lb

SFS-H-L Horizontal (Long) 36" to 48" Standoff 77 lb

SFS-V Vertical 24" to 36" Standoff 66 lb

SFS-V-L Vertical (Long) 36" to 48" Standoff 77 lb

SFS-NA Attachment hardware only, no angles (arms) included 38 lb

TAM-LL Large Leg Adapter Kit 39 lb

7
SitePro1.com • 1-888-438-7761
T-Mobile Approved Reinforcement Kits
Dual-Level Reinforcement Kits
Description:
• Universal design provides extra capacity to existing Sector Frames for mounting RRU’s
• Provide both vertical and horizontal reinforcement
• The maximum additional normal load capacity gained is 1,200 lb, the maximum additional
tangential load capacity gained is 400 lb, and the maximum additional dead load capacity
gained is 1,500 lb
• Universal mounting; round legs from 1” to 8”, 60° angle legs from 1-1/2” to 8”, and 90° angle legs
from 1-1/2” to 6”
• Large-Leg Adapter Kit available for round legs up to 12-3/4”, 60° angle legs up to 12”, and
90° angles up to 8-1/2”
• Angle brace size is 2-1/2” x 2-1/2” x 3-16”

SFR-K

Part# Application Sector Quantity Weight

SFR-K 24" to 36" Standoff 1 132 lb

SFR-K-L 36" to 48" Standoff 1 154 lb

SFR-K-3 24" to 36" Standoff 3 396 lb

SFR-K-L-3 36" to 48" Standoff 3 462 lb

TAM-LL Large Leg Adapter Kit 39 lb

8
SitePro1.com • 1-888-438-7761
T-Mobile Approved Standoff Mounts
Bogner Mount and Standoff Mounts
Description:
Bogner Mount
• Heavy-duty 6’ Side Arm for the most extreme loading conditions
• Features our BCAM™ Taper Adjustment System
• Mounts to 1-1/2” to 9-1/2” round and 3” to 6” angle legs;
add BCAM-SDLL kit for larger members
• Mounts pivots for easy azimuth adjustment
• Includes stiff arm
• 3-1/2” x 52” Vertical mast
• Rated for 500 lb live load
BOG6
• US Patent No.: US 10,316,511 B1

Standoff Mounts
• Feature our BCAM™ Taper Adjustment System
• Round-member face offers lower wind resistance
• Mount to 1-1/2” to 9-1/2” round and 3” to 6” angle legs; for larger members add the BCAM-
SDLL kit
• Mounts rotate for easy azimuth adjustment
• Stiff arm included
• 2-3/8” x 50” vertical mast
• Rated for 250 lb live load
PSA3
• US Patent No.: US 10,316,511 B1

Part # Description Weight

BOG6 6’ HD Stand-Off Mount Kit 480 lb

PSA3 3’ Stand-Off Mount Kit 170 lb

PSA6 6’ Stand-Off Mount Kit 183 lb

Large-Leg Adapter Kit, up to 16” Round Legs,

BCAM-SDLL 114 lb
up to 6” 90º Angle Legs, or #12 Breakdown Legs

Large-Leg Adapter Kit, 7” to 12” 90º Angle Legs

BCAM-SDLL-AA 115 lb
or #12 Breakdown Legs

9
SitePro1.com • 1-888-438-7761
T-Mobile Approved Standoff Mounts
Heavy-Duty Stand-Off Mounts
Description:
• Versatile mounts work on towers, monopoles, and buildings
• One-piece welded design
• Constructed from Schedule 40 pipe
• Standard versions mount to 1-1/2” to 4-1/2” OD members;
add Large-Leg Adapter Kit for larger members
• Hot-dip galvanized
• Turning ring on HS6 allows bracket to rotate for service
• The maximum taper adjustment is 3.8 degrees based upon
45” spacing of mounting brackets.

HS6-K

Part # Standoff Mast Size Weight

HS4-K 4’ 2-3/8” x 38” 55 lb

HS6-K 6’ 3-1/2” x 42-1/2” 115 lb

LLEG-K 4-3/4” to 10-3/4” Diameter & 3” to 8” Angles 78 lb

10
SitePro1.com • 1-888-438-7761
T-Mobile Approved Standoff Mounts
Lightweight Stand-Off Mounts Panel Antenna Stand-Off Mounts

S2-K

PM1

S4-K PM2

Description: Description:
• One-piece welded design • Versatile mounts works on towers, monopoles, and buildings
• 1-1/2” (1.9” OD) Schedule 40 pipe construction • One-piece welded design
• Hot-dip galvanized • Constructed from 2-3/8” OD Schedule 40 pipe
• Fit pipe up to 4-1/2” OD, 60° angle up to 4-1/2”, or 90° angle up to 3” • Hot-dip galvanized
• Purchase mounting hardware separately
Part # Standoff Mast Pipe Weight
Part # Standoff Antenna Pipe Mounting Pipe Weight
S2-K 2’ 24” 23 lb
PM1 1’ 120” 48” 60 lb
S3-K 3’ 24” 30 lb
PM2 2’ 120” 48” 68 lb
S4-K 4’ 38” 42 lb

11
SitePro1.com • 1-888-438-7761
T-Mobile Approved Tower Mounts
R5 Heavy-Duty Universal Pipe Mounts
Description:
R5 Heavy-Duty Universal Pipe Mounts
• Sliding brackets for the most difficult tower attachments
• R5 and R5-LL include 4-1/2” x 72” antenna mounting pipe;
R5-UP version includes hardware for mounting 1-1/2” to 4-1/2” OD antenna mounting pipes,
but no pipe
• Easily adjustable taper up to 5.7° (based on 30” spacing of brackets)
R5-216 • Kits include U-bolts and all hardware

R5 Universal Pipe Mount with Face

• Sliding brackets for the most difficult tower attachments
R5 • Includes 4-1/2” x 72” mounting pipe
• Accepts 2-3/8” to 4-1/2” OD antenna mounting pipes
• 3-1/2” x 60” horizontal pipe allows up to 48” of separation
• Easily adjustable taper
• Kit includes U-bolts and all hardware
• Purchase antenna mounting pipes separately

Order Antenna Mounting

Pipes separately

Part # Description Application Pipe Weight

R5 Two brackets, pipe & hardware 1-1/2” to 4-1/2” OD Members 4-1/2” x 72” 137 lb

R5-LL Two brackets, pipe & hardware 1-1/2” to 10-3/4” Diameter & 3” to 8” Angles 4-1/2” x 72” 148 lb

No Pipe Included; Accepts Antenna

R5-UP Two brackets & hardware 1-1/2” to 4-1/2” OD Members 90 lb
Mounting Pipes 1-1/2” to 4-1/2”

R5-216 R5 Universal Pipe Mount with Face 1-1/2” to 4-1/2” OD Round Members 4-1/2” x 72” Mounting Pipe 235 lb

LLEG-K Large-Leg Adapter Kit 4-3/4” to 10-3/4” Diameter & 3” to 8” Angles N/A 78 lb

12
SitePro1.com • 1-888-438-7761
T-Mobile Approved Tower Mounts
R6 Heavy-Duty Universal Pipe Mount Kit
Description:
• Heavy-duty sliding brackets for difficult tower attachments
• Includes 4-1/2” x 72” antenna mounting pipe
• Easy-adjustment taper up to 5.7° (based on 30” spacing of brackets)
• Fits round leg sizes 1-1/2” to 9-1/2” diameter and angle sizes 3” to 6”
• With BCAM-HDLL fits up to 16” round legs or #12 Truss Legs
• With BCAM-HDLL-AA fits up to 12” 90º angle legs or #12 Breakdown Legs

R6

Part # Description Pipe Weight

R6 Heavy-duty Universal Pipe Mount Kit 4-1/2” x 72” 265 lb

Large-Leg Adapter Kit, up to 16” Round Legs, up to 6”

BCAM-HDLL 130 lb
90º Angle Legs, or #12 Breakdown Legs

Large-Leg Adapter Kit, 7” to 12” 90º Angle Legs

BCAM-HDLL-AA 130 lb
or #12 Breakdown Legs

13
SitePro1.com • 1-888-438-7761
T-Mobile Approved Tower Mounts
Sliding Universal Tapered Pipe Mounts
Description:
• Sliding brackets for the most difficult tower attachments
• Easily adjustable taper up to 6° in 3/4° increments
• Universal mounting; round legs from 1” to 8”, 60° angle legs from
1-1/2” to 8”, and 90° angles 1-1/2” to 6”
• Large-Leg Adapter Kit available for round legs up to 12-3/4”, 60° angle legs up to 12”, and 90°
TAM-3U angles up to 8-1/2”
• Kits include U-bolts and all hardware
• Order antenna mounting pipes separately

Order antenna mounting

pipes separately

Part # Description Pipe OD Standoff Weight

TAM-2U Two brackets, U-Bolts & hdw 2-3/8” and 2-7/8” 1’ 77 lb

TAM-2U-L Two brackets, U-Bolts & hdw 2-3/8” and 2-7/8” 2’ 93 lb

TAM-3U Two brackets, U-Bolts & hdw 3-1/2” and 4-1/2” 1’ 79 lb

TAM-3U-L Two brackets, U-Bolts & hdw 3-1/2” and 4-1/2” 2’ 95 lb

TAM-LL Large-Leg Adapter Kit 39 lb

14
SitePro1.com • 1-888-438-7761
T-Mobile Approved Tower Mounts
Universal Face Pipe Mount Assemblies
Description:
• Universal mounts designed for the most difficult face mount applications
• Easily adjustable taper up to 8º (based on 60” spacing of brackets)
• Work with face pipes 3-1/2” or 4-1/2” OD
• Attach to 1-1/2” to 9-1/2” round members or 3” to 6” angles
• NP versions include brackets for double-level assemblies; NPS versions include brackets
for single-level assemblies
• Four FACE-LLEG required for FACE-ASY1 and
six FACE-LLEG required for FACE-ASY3
• Four-sector versions are also availabe, see web site for details

FACE-ASY1

Part # Sectors Face Pipes Weight

FACE-ASY1-3126 One (2) 3-1/2” x 10’-6” 690 lb

FACE-ASY1-4126 One (2) 4-1/2” x 10’-6” 755 lb FACE-LLEG

FACE-ASY1-NP One None 530 lb

FACE-ASY1-NPS One None 265 lb

FACE-ASY3-3126 Three (6) 3-1/2” x 10’-6” 1,330 lb

FACE-ASY3-4126 Three (6) 4-1/2” x 10’-6” 1,530 lb

FACE-ASY3-NP Three None 850 lb

FACE-ASY3-NPS Three None 425 lb

FACE-LLEG Varies None 75 lb

FACE-PM Pipe Mount Attachment Kit (No Pipe) 52 lb

15
SitePro1.com • 1-888-438-7761
T-Mobile Approved Tower Mounts
Dual RRU Mounts
Description:
• RRUDSM mounts up to 2 RRU’s; RRUDPMX mounts up to 4 RRU’s
• RRU’s are kept close to the antenna and allow for easy maintenance
and simple installations
• Universal slotted mounting holes accommodate most RRU’s
• Hot-dip galvanized construction; all hardware included

RRUDSM

RRUDPMX

Part # Description Mounting Range Weight

RRU Dual Swivel Mount Pipes up to 4-1/2”
RRUDSM 40 lb
(Kit of 2) Angles up to 3” x 3”

Dual RRU Swiveling Pipes up to 4-1/2”

RRUDPMX 115 lb
Tower Mount (Kit of 2) Angles up to 3” x 3”

16
SitePro1.com • 1-888-438-7761
T-Mobile Approved Tower Components
Universal Sliding Pipe Tie-Back Assemblies Adjustable Clamp Plate Tie-Back Assembly

SPTB

STK-U

Description: Description:
• SPTB is a 2-3/8” x 10’-6” Stiff Arm • Drop-forged design for increased strength and durability
• Universal Sector Frame attachment hardware fits 1-1/2” to 5” OD • Hot-dip galvanized
• Leg bracket fits round legs from 1-1/2” to 8-5/8” OD, 60° angle legs • All hardware included
up to 8”, and 90° angle legs up to 6” • Angle adjusts from 40° to 140°
• STK-U is a 2-3/8” x 12’-6” Stiff Arm
• Sector Frame attachment hardware fits 2-3/8” Pipe
Part # Application Weight
• Leg bracket fits round legs from 1-1/2” to 6” OD, 60° angle legs up to 6”,
and 90° angle legs up to 4” PUCK 7/8” to 3-1/2” OD 6.2 lb

Part # Description Weight

SPTB Sliding Pipe Stiff Arm Assembly 2-3/8” pipe 89 lb

SPTB278 Sliding Pipe Stiff Arm Assembly 2-7/8” pipe 115 lb

SPTB-NP 2-3/8” Sliding Pipe Stiff Arm Hardware, No Pipe 48 lb

SPTB278-NP 2-7/8” Sliding Pipe Stiff Arm Hardware, No Pipe 51 lb

STK-U Sector Frame Stiff Arm Kit; 2-3/8” x 12’-6” pipe 64 lb

17
SitePro1.com • 1-888-438-7761
T-Mobile Approved Platforms
Fortress™ Tri-Platform Mount
Description:
• The Fortress™ Tri-Platform is the strongest monopole platform we have ever built; it’s robust
design eliminates the need for a second ring mount and reinforcement kit
F3P-12W • The revolutionary new truss design makes the Fortress™ Tri-Platform 3 times stronger than
ordinary platform mounts while maintaining a low EPA
• Innovative hinged grating sections allow easy access to walkway; flush walkway and the lack of
sharp edges make this platform safe for climbers
• Welded design requires minimal hardware; all hardware
is 5/8” to further simplify assembly
• Kits include hardware to mount up to twelve 2-3/8” or 2-7/8” Antenna Mounting Pipes (order
separately)
• No-grating versions of the Fortress platform are also available

Add Antenna Mounting

Pipes separately

Pole Handrail Kits

Part # Walkway Pole Diameter Face Width Weight
Circumference
F3P-8W Yes 12” - 30” 37.7” - 94.2” 9’ - 0” 1,850 lb Part # Description Weight
Handrail Kit for F3P-8W
F3P-10W Yes 12” - 45” 37.7” - 141.3” 10’ - 6” 1,925 lb F3P-HRK8 375 lb
Platform
F3P-12W Yes 12” - 60” 37.7” - 188.4” 12’ - 6” 2,130 lb
Handrail Kit for F3P-10W
F3P-HRK10 395 lb
F3P-14W Yes 12” - 60” 37.7” - 188.4” 14’ - 6” 2,335 lb Platform

F3P-8 No 12” - 30” 37.7” - 94.2” 9’ - 0” 1,695 lb Handrail Kit for F3P-12W
F3P-HRK12 410 lb
Platform
F3P-10 No 12” - 45” 37.7” - 141.3” 10’ - 6” 1,745 lb
Handrail Kit for F3P-14W
F3P-HRK14 440 lb
F3P-12 No 12” - 60” 37.7” - 188.4” 12’ - 6” 1,840 lb Platform

F3P-14 No 12” - 60” 37.7” - 188.4” 14’ - 6” 1,960 lb

18
SitePro1.com • 1-888-438-7761
T-Mobile Approved Platforms
Fortress™ Quad-Platform Mount
Description:
• The Fortress™ Quad-Platform is the strongest monopole platform we have ever built; it’s robust
design eliminates the need for a second ring mount and reinforcement kit
F4P-10W • The revolutionary new truss design makes the Fortress™ Quad-Platform 3 times stronger than
ordinary platform mounts while maintaining a low EPA
• Innovative hinged grating sections allow easy access to walkway; flush walkway and the lack of
sharp edges make this platform safe for climbers
• Welded design requires minimal hardware; all hardware is 5/8” to further simplify assembly
• Kits include hardware to mount up to sixteen 2-3/8” or 2-7/8” Antenna Mounting Pipes (order
separately)
• No-grating versions of the Fortress platform are also available

Add Antenna Mounting

Pipes separately

Part # Walkway Pole Diameter Pole Circumference Face Width Weight Handrail Kits
F4P-8W Yes 12” - 40” 37.7” - 94.2” 9’ - 0” 2,425 lb
Part # Description Weight
F4P-10W Yes 12” - 60” 37.7” - 125.6” 10’ - 6” 2,525 lb
Handrail Kit for F4P-8W
F4P-HRK8 465 lb
F4P-12W Yes 12” - 60” 37.7” - 188.4” 12’ - 6” 2,780 lb Platform

F4P-14W Yes 12” - 60” 37.7” - 188.4” 14’ - 6” 3,060 lb Handrail Kit for F4P-10W
F4P-HRK10 490 lb
Platform
F4P-8 No 12” - 40” 37.7” - 94.2” 9’ - 0” 2,225 lb
Handrail Kit for F4P-12W
F4P-HRK12 510 lb
F4P-10 No 12” - 60” 37.7” - 125.6” 10’ - 6” 2,275 lb Platform

F4P-12 No 12” - 60” 37.7” - 188.4” 12’ - 6” 2,400 lb Handrail Kit for F4P-14W
F4P-HRK14 550 lb
Platform
F4P-14 No 12” - 60” 37.7” - 188.4” 14’ - 6” 2,560 lb

19
SitePro1.com • 1-888-438-7761
T-Mobile Approved Platforms
Low-Profile Co-Location Platforms for 9 Antennas
Description:
Kit includes
everything • COMPLETE KITS include:
shown • Ring Mount
• (3) Support Arms
• Grating
• Antenna Mounting Pipes and all hardware
• Note: NP versions do not include hardware for Antenna Mounting Pipes

Pole Pole Mounting

Part # Face Width
Diameter Circumference Pipes
RMQP-NP 12” - 38” 37.7” - 119.3” 12’-6” No Pipes

RMQP-372 12” - 38” 37.7” - 119.3” 12’-6” (9) 2-3/8” x 72”

RMQP-384 12” - 38” 37.7” - 119.3” 12’-6” (9) 2-3/8” x 84”

RMQP-396 12” - 38” 37.7” - 119.3” 12’-6” (9) 2-3/8” x 96”

RMQP-3126 12” - 38” 37.7” - 119.3” 12’-6” (9) 2-3/8” x 126”

RMQLP-NP 12” - 38” 37.7” - 119.3” 14’-6” No Pipes

RMQLP-372 12” - 38” 37.7” - 119.3” 14’-6” (9) 2-3/8” x 72”

RMQLP-384 12” - 38” 37.7” - 119.3” 14’-6” (9) 2-3/8” x 84”

RMQLP-396 12” - 38” 37.7” - 119.3” 14’-6” (9) 2-3/8” x 96”

RMQLP-3126 12” - 38” 37.7” - 119.3” 14’-6” (9) 2-3/8” x 126”

Larger Pole Sizes

Pole Pole Mounting

Handrails Part # Face Width
Diameter Circumference Pipes
Part# Description Mounting Pipes RMVP-NP 30” - 60” 94.2” - 188.4” 14’-6” No Pipes

HRK12 Handrail Kit for 12’-6” Face 2-3/8” Antenna Pipes RMVP-372 30” - 60” 94.2” - 188.4” 14’-6” (9) 2-3/8” x 72”

HRK14 Handrail Kit for 14’-6” Face 2-3/8” Antenna Pipes RMVP-384 30” - 60” 94.2” - 188.4” 14’-6” (9) 2-3/8” x 84”

HRK12-U Handrail Kit for 12’-6” Face 2-3/8” and 2-7/8” Antenna Pipes RMVP-396 30” - 60” 94.2” - 188.4” 14’-6” (9) 2-3/8” x 96”

HRK14-U Handrail Kit for 14’-6” Face 2-3/8” and 2-7/8” Antenna Pipes RMVP-3126 30” - 60” 94.2” - 188.4” 14’-6” (9) 2-3/8” x 126”

20
SitePro1.com • 1-888-438-7761
T-Mobile Approved Platforms
Low-Profile Co-Location Platforms for 12 Antennas
Description:
Kit includes
everything • COMPLETE KITS include:
shown • Ring Mount
• (3) Support Arms
• Grating
• Antenna Mounting Pipes and all hardware
• Note: NP versions do not include hardware for Antenna Mounting Pipes

Pole Pole Mounting

Part # Face Width
Diameter Circumference Pipes
RMQP-NP 12” - 38” 37.7” - 119.3” 12’-6” No Pipes

RMQP-472 12” - 38” 37.7” - 119.3” 12’-6” (12) 2-3/8” x 72”

RMQP-484 12” - 38” 37.7” - 119.3” 12’-6” (12) 2-3/8” x 84”

RMQP-496 12” - 38” 37.7” - 119.3” 12’-6” (12) 2-3/8” x 96”

RMQP-4126 12” - 38” 37.7” - 119.3” 12’-6” (12) 2-3/8” x 126”

RMQLP-NP 12” - 38” 37.7” - 119.3” 14’-6” No Pipes

RMQLP-472 12” - 38” 37.7” - 119.3” 14’-6” (12) 2-3/8” x 72”

RMQLP-484 12” - 38” 37.7” - 119.3” 14’-6” (12) 2-3/8” x 84”

RMQLP-496 12” - 38” 37.7” - 119.3” 14’-6” (12) 2-3/8” x 96”

RMQLP-4126 12” - 38” 37.7” - 119.3” 14’-6” (12) 2-3/8” x 126”

Larger Pole Sizes

Pole Pole Mounting

Handrails Part # Face Width
Diameter Circumference Pipes
Part# Description Mounting Pipes RMVP-NP 30” - 60” 94.2” - 188.4” 14’-6” No Pipes

HRK12 Handrail Kit for 12’-6” Face 2-3/8” Antenna Pipes RMVP-472 30” - 60” 94.2” - 188.4” 14’-6” (12) 2-3/8” x 72”

HRK14 Handrail Kit for 14’-6” Face 2-3/8” Antenna Pipes RMVP-484 30” - 60” 94.2” - 188.4” 14’-6” (12) 2-3/8” x 84”

HRK12-U Handrail Kit for 12’-6” Face 2-3/8” and 2-7/8” Antenna Pipes RMVP-496 30” - 60” 94.2” - 188.4” 14’-6” (12) 2-3/8” x 96”

HRK14-U Handrail Kit for 14’-6” Face 2-3/8” and 2-7/8” Antenna Pipes RMVP-4126 30” - 60” 94.2” - 188.4” 14’-6” (12) 2-3/8” x 126”

21
SitePro1.com • 1-888-438-7761
T-Mobile Approved Platforms
Low-Profile Co-Location Platforms for 12 Antennas
Description:
• COMPLETE KITS include:
• Ring Mount
• (3) Support Arms
• Grating
• Antenna Mounting Pipes and all hardware
• Top Rail Kit, and Reinforcement Kit

RMQP-40126-HK

Pole Pole Mounting

Part # Face Width
Diameter Circumference Pipes
RMQP-40126-HK 12” - 38” 37.7” - 119.3” 12’-6” (12) 2-7/8” x 126”

RMQP-4126-HK 12” - 38” 37.7” - 119.3” 12’-6” (12) 2-3/8” x 126”

RMQLP-4126-HK 12” - 38” 37.7” - 119.3” 14’-6” (12) 2-3/8” x 126”

RMVP-4126-HK 30” - 60” 94.2” - 188.4” 14’-6” (12) 2-3/8” x 126”

22
SitePro1.com • 1-888-438-7761
T-Mobile Approved Snub Nose Platform Kits
Snub-Nose Platform Kits
Description:
• Available in 8’ and 10’ versions
• Our low-profile design offers a lower EPA for reduced loads on the tower
• This robust platform supports live loads of 500 lb
• Handrail kit option provides added strength and easy antenna and
RRU mounting as well as worker safety
• Add “HR” to the part number (example SNP8HR-NP) for platform
with handrail kit
• Simple design for ease of assembly
• Complete kits include:
• Ring mount
• Three support arms
• Grating
• Antenna mounting pipes and all hardware
• Note: NP versions do not include antenna mounting pipes or hardware;
• Contact us for load and engineering data

8’ Platforms

Part # Pole Diameter Pole Circumference Face Width Mounting Pipes Weight
SNP8-396 12” - 45” 37.7” - 141.3” 8’ (9) 2-3/8” x 96” 1,465 lb

SNP8-3126 12” - 45” 37.7” - 141.3” 8’ (9) 2-3/8” x 126” 1,585 lb

HRA8 2-7/8” Handrail Kit 310 lb

10’ Platforms

Part # Pole Diameter Pole Circumference Face Width Mounting Pipes Weight
SNP10-NP 12” - 45” 37.7” - 141.3” 10’ None 1,350 lb

SNP10-3126 12” - 45” 37.7” - 141.3” 10’ (9) 2-3/8” x 126” 1,605 lb

SNP10-496 12” - 45” 37.7” - 141.3” 10’ (12) 2-3/8” x 96” 1,645 lb

SNP10-4126 12” - 45” 37.7” - 141.3” 10’ (12) 2-3/8” x 126” 1,765 lb

HRA10 2-7/8” Handrail Kit 365 lb

23
SitePro1.com • 1-888-438-7761
T-Mobile Approved Snub Nose Platform Kits
Full Walkway Snub-Nose Platform Kits
Description:
• Available in 12’ & 14’ versions
• Our low-profile design offers a lower EPA for reduced loads on the tower
• These platforms support live loads of 500 lb
• Handrail kit option provides added strength and easy antenna and
RRU mounting as well as worker safety
• Add “HR” to the part number (example SNP12HR-NP) for
platform with handrail kit
• Simple design for ease of assembly
• Complete kits include:
• Ring mount
• Three support arms
• Grating
• Antenna mounting pipes and all hardware
• Note: NP versions do not include antenna mounting pipes or hardware
• Contact us for load and engineering data

12’ Platforms

Part # Pole Diameter Pole Circumference Face Width Mounting Pipes Weight
SNP12-396 12” - 45” 37.7” - 141.3” 12’ (9) 2-3/8” x 96” 1,900 lb

SNP12-3126 12” - 45” 37.7” - 141.3” 12’ (9) 2-3/8” x 126” 1,990 lb

SNP12-496 12” - 45” 37.7” - 141.3” 12’ (12) 2-3/8” x 96” 2,030 lb

SNP12-4126 12” - 45” 37.7” - 141.3” 12’ (12) 2-3/8” x 126” 2,150 lb

HRA12 2-7/8” Handrail Kit 420 lb

14’ Platforms

Part # Pole Diameter Pole Circumference Face Width Mounting Pipes Weight
SNP14-396 12” - 45” 37.7” - 141.3” 14’ (9) 2-3/8” x 96” 1,945 lb

SNP14-3126 12” - 45” 37.7” - 141.3” 14’ (9) 2-3/8” x 126” 2,035 lb

SNP14-496 12” - 45” 37.7” - 141.3” 14’ (12) 2-3/8” x 96” 2,075 lb

SNP14-4126 12” - 45” 37.7” - 141.3” 14’ (12) 2-3/8” x 126” 2,195 lb

HRA14 2-7/8” Handrail Kit 440 lb

24
SitePro1.com • 1-888-438-7761
T-Mobile Approved T-Arm Mounts
Monopole Dual Triple T-Arm Kit
Description:
• 8’ Double T-Arm Kit
• Monopole mounting range: 12” to 45”

RMVD-8-2120-18

Part# Description Antenna Pipe (QTY) & Size Weight

RMVD8-296-18 8' Monopole Dual Triple T-Arm Kit w/ 18" Standoff (9) 2-3/8" x 96" 1,881 lb

RMVD8-2120-18 8' Monopole Dual Triple T-Arm Kit w/ 18" Standoff (9) 2-3/8" x 120" 1,937 lb

25
SitePro1.com • 1-888-438-7761
T-Mobile Approved Solutions for Concealment Sites
Radio Support Arm with Reinforced Support Rail
Description:
• COMPLETE KITS include:
• Ring Mount
• (3) Support Arms
• Support Rail and Corner Brackets
• Horizontal Pipes and Crossover Plates
• Order 2-3/8” diameter or 2-7/8” diameter Mount Pipes separately

RDSR-HK

RDSR-HKL

Standoff Hardware to Mount

Part # Face Width Pole Diameter Weight
Distance (X) Antennas
RDSR-HK 84” 8” 9 12”- 45” 890 lb

RDSR-HKL 126” 24” 12 12”- 45” 1,150 lb

26
SitePro1.com • 1-888-438-7761
T-Mobile Approved Solution for Concealment Sites
Ultra-Low-Profile T-Arm Kit for 12 Antenna with Support Rail
Description:
• Increased capacity
• Low-Profile deisgn for reduced tower loading
• All round members reduce the risk of migratory bird nesting.
• Order ULP12 Frame and HRA12 Support Rail Separately

ULP12-4XX with HRA12 shown

Face
Part # Pole Diameter Standoff Mounting Pipes Weight
Width
ULP12-NP 12” - 45” 36” 12’-6” No Antenna Pipes 883 lb

ULP12-472 12” - 45” 36” 12’-6” (12) 2-3/8” x 72” 1,312 lb

ULP12-484 12” - 45” 36” 12’-6” (12) 2-3/8” x 84” 1,358 lb

ULP12-496 12” - 45” 36” 12’-6” (12) 2-3/8” x 96” 1,404 lb

ULP12-4126 12” - 45” 36” 12’-6” (12) 2-3/8” x 126” 1,524 lb

HRA12 Support Rail 12” - 45” 36” 12’-6” 416 lb

27
SitePro1.com • 1-888-438-7761
T-Mobile Approved T-Arms
Taper Adjustable Chain Mounts
Description:
Order Antenna • Fit polygon or round poles
Mounting Pipe
• Simple taper adjustment allows for up to 6° of taper in 3/4° increments
separately
• Includes U-Bolts for mounting 2-3/8” or 4-1/2” OD Pipes
• Hot-dip galvanized
• Purchase U-Bolts separately if mounting 2-7/8” or 3-1/2” Pipes)
• Order Antenna Mounting Pipes separately

Part # Description Standoff Range Weight

TCHM1 Single Sector 1’ 5” - 36” 80 lb

TCHM1-L Single Sector 2’ 5” - 36” 96 lb

TCHM2 Double Sector 1’ 5” - 36” 150 lb

TCHM2-L Double Sector 2’ 5” - 36” 180 lb

TCHM3 Triple Sector 1’ 6-1/2” - 36” 225 lb

TCHM3-L Triple Sector 2’ 6-1/2” - 36” 270 lb

28
SitePro1.com • 1-888-438-7761
T-Mobile Approved T-Arms
Platform/T-Arm Reinforcement Kits
Description:
• Simple bolt-on Reinforcement Kits include Ring Mount and Support Arms to reinforce existing
platforms or T-arms when increased dead load is required (multiple RRU’s)
• Fit round or polygon poles from 12” to 45” diameter, or up to 60” with the addition of the RM-ADK
Large Pole Adapter Kit
• The maximum additional vertical load capacity gained is 4,000 lb per sector arm
(12,000 lb total)
• PRK-1245, PRK-1245L, and PRK-NA hardware kits fit up to 4” round or square tube standoff arms
• PRK-1245LW hardware kit fits up to 6” round or square tube standoff arms
• PRK-HD hardware kit fits up to 5” round or square tube standoff arms

PRK-1245

Pole Horizontal
Part# Description Angle Size Weight
Diameter Connection
PRK-1245 Reinforcement Kit 12" to 45" 4” x 4” Max 2L 2-1/2” x 2-1/2” x 3/16” x 52” 467 lb

PRK-1245L Long Reinforcement Kit 12" to 45" 4” x 4” Max 2L 2-1/2” x 2-1/2” x 3/16” x 84” 518 lb

PRK-1245LW Reinforcement Kit, Wide Connection 12" to 45" 6” x 6” Max 2L 2-1/2” x 2-1/2” x 3/16” x 84” 565 lb

PRK-HD Reinforcement Kit, Heavy-Duty Angle 12" to 45" 5” x 5” Max 2L 3” x 3” x 1/4” x 84" 628 lb

PRK-NA Attachment hardware only, no angles (arms) included 12" to 45" 4” x 4” Max Order Separately 381 lb

RM-ADK Large Pole Adapter Kit 45" to 60" --- --- 106 lb

29
SitePro1.com • 1-888-438-7761
T-Mobile Approved T-Arms
Platform/T-Arm Reinforcement Kits
Description:
• Simple bolt-on Reinforcement Kits include Ring Mount and Support Arms to reinforce existing
platforms or T-arms when increased dead load is required (multiple RRU’s)
• Fit round or polygon poles from 12” to 60” diameter
• Increase platform dead load capacity up to 5,600 lb per sector; contact us for detailed load
and engineering data
• The maximum additional vertical load capacity gained is 3,000 lb per sector arm
(12,000 lb total)
• Attaching hardware fits up to 4” round or square tube standoff arms
• Attach directly to Fortress™ and SNP series platforms

PQ-1245

Horizontal
Part# Description Pole Diameter Angle Size Weight
Connection
PQ-1245 Reinforcement Kit 12" to 60" 4” x 4” Max 2L 2-1/2” x 2-1/2” x 3/16” x 52" 605 lb

PQ-1245L Long Reinforcement Kit 12" to 60" 4” x 4” Max 2L 2-1/2” x 2-1/2” x 3/16” x 84" 677 lb

Attachment hardware only,

PQ-NA 12" to 60" 4” x 4” Max Order Angle Separately 456 lb
no angles (arms) included

30
SitePro1.com • 1-888-438-7761
T-Mobile Approved T-Arms
Cable Platform Reinforcement Kits
Description:
• Cable Reinforcement Kits provide additional capacity for Fortress ™ or other monopole
platforms
• Extremely low EPA
• Clamp ring mounts a minimum of 48” above the platform
• 5/16” galvanized aircraft cable
• Universal kit attaching hardware fits up to 4” square tube or round support arms
• Attach to the platform with 5/16” shackles
• CRK-DC3 and CRK-UC3 fit round or polygon poles from 12” to 45” diameter or up to 60” with the
addition of the RM-ADK Large Pole Adapter Kit
• CRK-DC4 and CRK-UC4 fit round or polygon poles from 12” to 60” diameter

CRK-UC3

CRK-DC4

Horizontal
Part# Platform Style Pole Diameter Weight
Connection
CRK-DC3 Fortress F3P 12” – 45” 4” x 4” Max 349 lb

CRK-DC4 Fortress F4P 12” – 60” 4” x 4” Max 409 lb

CRK-UC3 Universal 12” – 45” 4” x 4” Max 415 lb

CRK-UC4 Universal 12” – 60” 4” x 4” Max 497 lb

45” to 60” Large Pole Adapter Kit for

RM-ADK --- 106 lb
CRK-DC3 and CRK-UC3

31
SitePro1.com • 1-888-438-7761
T-Mobile Approved T-Arms
Universal Platform Handrail Kits
Description:
• Use to add Handrails and Antenna Pipe support to existing platforms
HRK12-HD
• Universal design works for a wide variety of platforms
• COMPLETE KITS include:
• Handrail Pipes
• (3) Corner Brace Kits
• (12) Crossover plates and hardware
• HD kits include 3 additional Cross Brace supports

HRK12

Part# Face Width Handrail Pipe Size Antenna Mounting Pipe Size Weight

HRK12 12'-6" 2-3/8” OD x 150" 2-3/8” 273 lb

HRK14 14'-6" 2-3/8” OD x 174" 2-3/8” 303 lb

HRK12-HD 12'-6" 2-3/8” OD x 150" 2-3/8” or 2-7/8” 407 lb

HRK14-HD 14'-6" 2-3/8” OD x 174" 2-3/8” or 2-7/8” 449 lb

HRK12-3HD 12’-6” 2-7/8” OD x 150” 2-3/8” or 2-7/8” 503 lb

HRK14-3HD 14’-6” 2-7/8”OD x 174” 2-3/8” or 2-7/8” 525 lb

32
SitePro1.com • 1-888-438-7761
T-Mobile Approved T-Arms
Handrail Reinforcement Kits
Description:
• Provide extra rigidity to new or existing platform handrails
• Reinforcement Kits can be installed to support the handrails from above or below
• PRK-SFS and PRK-SFS-L fit round or polygon poles from 12” to 45” diameter, or up to 60”
diameter with the addition of the RM-ADK Large Pole Adapter Kit
• PQ-SFS fits round or polygon poles from 12” to 60” diameter
• Handrail connection hardware fits round members 1” to 3-1/2” OD

Support mounted above

handrail

Support mounted below

handrail

Part# Description Angle Size Weight

PRK-SFS Handrail Reinforcement Kit L 2-1/2” x 2-1/2” x 3/16” x 52-1/2” 574 lb

PRK-SFS-L Long Angle Handrail Reinforcement Kit L 2-1/2” x 2-1/2” x 3/16” x 72” 643 lb

PQ-SFS Quad Handrail Reinforcement Kit L 2-1/2” x 2-1/2” x 1/4” x 120” 758 lb

RM-ADK Large Pole Adapter Kit for PRK Kits --- 106 lb

33
SitePro1.com • 1-888-438-7761
T-Mobile Approved Non-Penetrating Rooftop Frames
Non-Penetrating Rooftop Pipe Frames
Description:
• Pipe rooftop frames, perfect for larger loads like multiple RRU’s or antennas
• Available with or without antenna mounting pipes
• Welded trays for easy assembly
• Standard kits accept 2-3/8” antenna mounting pipes
• For other size antenna mounting pipes purchase SCX7-U universal crossover plate kits
• If additional ballast capacity is required use ballast tray add-on kits
• Purchase rubber mats separately
• Call or see our online assembly drawings for ballast equations.
www.sitepro1.com

Part # Face Width Mounting Pipes Footprint Mats Required Weight

RTP10-496 10’ - 6” (4) 2-3/8” x 96” 92” x 126” 6 695 lb

RTP10-4126 10’ - 6” (4) 2-3/8” x 126” 92” x 126” 6 735 lb

RTP12 12’ - 6” No Pipes 92” x 150” 8 645 lb

RTP12-496 12’ - 6” (4) 2-3/8” x 96” 92” x 150” 8 770 lb

RTP12-4126 12’ - 6” (4) 2-3/8” x 126” 92” x 150” 8 805 lb

RTP14 14’ - 6” No Pipes 92” x 174” 12 900 lb

RTP14-496 14’ - 6” (4) 2-3/8” x 96” 92” x 174” 12 1,020 lb

RTP14-4126 14’ - 6” (4) 2-3/8” x 126” 92” x 174” 12 1,060 lb

MAT18 1/2" x 18" x 48" Rubber Mat 16 lb

CSRT-BTD Ballast Tie Down Kit (RTP10 requires 3, RTP 12 requires 4, RTP14 requires 6) 12 lb

34
SitePro1.com • 1-888-438-7761
T-Mobile Approved Non-Penetrating Rooftop Frames
Non-Penetrating Rooftop Frames with RRU Mounts
Description:
• Similar to our standard non-penetrating rooftop pipe frames,
Order antenna but include a rear RRU mounting frame
mounting pipes • Standard kits include four 2-3/8” x 174” antenna mounting pipes
separately
• NP kits include hardware for 2-3/8” antenna mounting pipes;
purchase antenna mounting pipes separately
• If using other size antenna mounting pipes purchase SCX7-U universal crossover plate kits
• Welded trays for easy assembly
• If additional ballast capacity is required use ballast tray add-on kits
• Purchase rubber mats separately
• Call or see our online assembly drawings for ballast equations.
www.sitepro1.com

Part # Face Width Mounting Pipes Footprint Mats Required Weight

RTP10-3RRU 10’-6” (4) 2-3/8” x 174” 92” x 126” 6 1,050 lb

RTP12-3RRU 12’-6” (4) 2-3/8” x 174” 92” x 150” 8 1,150 lb

RTP14-3RRU 14’-6” (4) 2-3/8” x 174” 92” x 174” 12 1,375 lb

RTP10-3RRU-NP 10’-6” No Pipes 92” x 126” 6 830 lb

RTP12-3RRU-NP 12’-6” No Pipes 92” x 150” 8 930 lb

RTP14-3RRU-NP 14’-6” No Pipes 92” x 174” 12 1,155 lb

35
SitePro1.com • 1-888-438-7761
T-Mobile Approved Rooftop Mounts
Non-Penetrating Tripod Penetrating Rooftop Mounts

Description: Description:
• Heavy-duty • 2-3/8” OD by 10’-6” or 12’-6” face widths hold up to four panel antennas
• Welded trays for quick assembly • Unique angle iron base eliminates weep hole and pitch pockets
• Accepts 2-3/8” - 4-1/2” mast pipes • Include attaching hardware to mount up to four 2-3/8”
• Order pipe and rubber mats separately or 2-7/8” OD antenna mounting pipes
• Call or see our online assembly drawings for ballast equations www.sitepro1.com

Part # Description Weight Part # Description Weight

TRPD-HD Non-Penetrating Tripod 345 lb TP1-10 10’ Single-Sector Penetrating Rooftop Mount 478 lb

TP1-12 12’ Single-Sector Penetrating Rooftop Mount 495 lb

36
SitePro1.com • 1-888-438-7761
T-Mobile Approved Wall Mounts
Angle Wall Mount Kits Universal Adjustable Wall Mount Brackets

Order antenna
mounting pipe
WMA238 separately

Description: Description:
• Extendable design adds flexibility to these wall mounts
• Constructed from 1/4” angles
• Use one bracket for lighter applications, or double up for a robust mounting solution
• Stand 3” or 4” off wall
• Accept 3/4” to 2-3/8” OD antenna mounting pipes
• Kits include two brackets and U-bolts
• Order antenna mounting pipes separately
• Order antenna mounting pipe separately
• Includes hardware for solid wall mounting (1/2” x 2-1/2” wedge anchors)
• Order hardware to mount to hollow or solid walls
• Purchase hollow wall mount kit if required
• Hot-dip galvanized

Part # Pipe OD Angle Size Mounting Holes Weights Part # Stand-Off Description Weight
WMA238 2-3/8” 3” x 3” x 15” 11/16” on 12” centers 29 lb WMU-24S 14” - 24” Adjustable Wall Mount Bracket 25 lb

WMA300 2-7/8” 3” x 3” x 15” 11/16” on 12” centers 29 lb

WMA312 3-1/2” 4” x 4” x 24” 11/16” on 21” centers 57 lb

WMA412 4-1/2” 4” x 4” x 24” 11/16” on 21” centers 57 lb

37
SitePro1.com • 1-888-438-7761
T-Mobile Approved Wall Mounts
Standoff Wireless Wall Mounts
Description:
• Use to install panel or whip antennas
• Kits include U-bolts for 2-3/8” and 2-7/8” antenna mounting pipes
• Order antenna mounting pipe separately
• If mounting a 3-1/2” OD pipe, purchase U-bolts (UB1358) separately
• Wall plate is 1/2” thick by 8-1/2” square with four 11/16” holes on 6” centers
• Standoff is 4” x 3/16” square tube
WWM02 • Order hardware to mount to hollow or solid walls

WWM01

Order antenna
mounting pipe
separately

Part # Stand Off Weight

WWM02 2’ 38 lb

WWM03 3’ 50 lb

HWK58 Hollow Wall Mount Kit 11 lb

SWK58 Solid Wall Mount Kit 9.2 lb

38
SitePro1.com • 1-888-438-7761
T-Mobile Approved Rooftop Cable Kits
Rooftop Cable Kits Tall Rooftop Cable Kits

SP1542

Rubber pads shown

but not included.

Rubber pads shown

but not included.
RP4

Description:
• Used to protect cables on rooftops Description:
• Self-splicing cover eliminates need for splices
• Heavy-duty 12 gauge galvanized steel • Tall rooftop cable kits accept stackable snap-Ins
• Each kit includes three sleepers and hardware • Stack up to two 1-5/8” snap-Ins or three 7/8” snap-Ins
• Cover height is 3-1/2” • Self-splicing cover eliminates need for splices
• SP1595 uses two covers side by side • Heavy-duty 12 gauge galvanized steel cover
• Each kit includes three sleepers and hardware
• Cover height is 8-1/4”
Part # # of Runs Cover Size Weight
• SP1595D uses two covers side by side
SP1542 4 11-1/2” x 8’ 58 lb

SP1543 8 21-1/2” x 8’ 89 lb Cover

Part # # of Holes for Snap-Ins Weight
Size
SP1595 12 33” x 8’ 140 lb
4 (stack up to (8) 1-5/8” cables,
SLEEPER PAD SP1542D 11-1/2” x 8’ 84 lb
or (12) 7/8” cables)

Part # Description Size Weight 8 (stack up to (16) 1-5/8” cables,

SP1543D 21-1/2” x 8’ 168 lb
or (24) 7/8” cables)
Sleeper pads that provide
RP4 protection for rooftops, and 4” x 10’ 6 lb 12 (stack up to (24) 1-5/8” cables,
SP1595D 33” x 8’ 190 lb
keep sleepers in position or (36) 7/8” cables)

39
SitePro1.com • 1-888-438-7761
T-Mobile Approved Rooftop Cable Kits
Adjustable Splices for Rooftop Cable Kits Rooftop Cable Run T-Stands

Description: Description:
• Adjustable splices used to join sections of cable kits • Galvanized steel T-stands allow horizontal runs of coax across rooftops
• Use to make up to a 45° bend • Base plates are 1/2” x 12” x 12” with 9/16” holes
• Hot-dip galvanized • Come with ladder mounting hardware
• Includes hardware • Cable ladder sold separately
• TL24-NP is sold without the horizontal pipe for custom applications;
purchase 2-3/8” pipe separately
Part # Application Weight
• Wedge anchors sold separately
SP1573 0-45° splice, 4-Run Kits 4.0 lb

SP1574 0-45° splice, 8-Run Kits 10.5 lb Use with

Part # # of Runs Height Width Weight
Ladder
SP1597 0-45° splice, 12-Run Kits 40 lb
TL24-14 4 24” 14.5” WCL4 46 lb

TL24-20 6 24” 21” WCL6 48 lb

TL24-NP Custom 24” Custom Custom 41 lb

40
SitePro1.com • 1-888-438-7761
T-Mobile Approved Step-Over Kits
Aluminum Step-Over Kits
Description:
• Aluminum construction keeps the weight down
• Heliarc-welded heavy-duty aluminum frames are rust and maintenance free
• Non-skid treads on platform are self-cleaning
• Load rating is 1,200 lb

Part # A B C D Width Feet Weight

UB10-24 10” 24” 13” 42.5” 36” 6” x 18” 55 lb

UB10-36 10” 36” 13” 48” 18” 6” x 18” 65 lb

41
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Trays
Straight Aluminum Cable Tray
Description:
• 5” side rails with 4” loading depth
• 9” rung spacing
• Each 12’ section includes splices and hardware
• 3/4” Lip on both sides

Part # Size Type Weight

LT-06-4D 6” x 12’ Tray 15 lb

LT-VSS-06-A 6” x 12’ Cover 5 lb

LT-09-4D 9” x 12’ Tray 17 lb

LT-VSS-09-A 9” x 12’ Cover 7 lb

LT-12-4D 12” x 12’ Tray 19 lb

LT-VSS-12-A 12” x 12’ Cover 9 lb

LT-18-4D 18” x 12’ Tray 21 lb

LT-VSS-18-A 18” x 12’ Cover 11 lb

LT-24-4D 24” x 12’ Tray 23 lb

LT-VSS-24-A 24” x 12’ Cover 15 lb

42
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Trays
45° and 90° Horizontal Bends and Horizontal T-Junctions
Part # Description Type Weight Description:
LT-C45-06-4D 6” (45° Bend) Tray 2 lb • Each section includes splice plates and hardware
LT-V45-06-A 6” (45° Bend) Cover 1 lb • Matching cover listed below
LT-C45-09-4D 9” (45° Bend) Tray 2.5 lb
LT-V45-09-A 9” (45° Bend) Cover 1.25 lb
LT-C45-12-4D 12” (45° Bend) Tray 3 lb
LT-V45-12-A 12” (45° Bend) Cover 1.5 lb
LT-C45-18-4D 18” (45° Bend) Tray 4 lb
LT-V45-18-A 18” (45° Bend) Cover 2 lb
LT-C45-24-4D 24” (45° Bend) Tray 5 lb
LT-V45-24-A 24” (45° Bend) Cover 2.5 lb
LT-C90-06-4D 6” (90° Bend) Tray 4 lb
LT-V90-06-A 6” (90° Bend) Cover 1.5 lb
LT-C90-09-4D 9” (90° Bend) Tray 5 lb
LT-V90-09-A 9” (90° Bend) Cover 2 lb
LT-C90-12-4D 12” (90° Bend) Tray 6 lb
LT-V90-12-A 12” (90° Bend) Cover 2.5 lb
LT-C90-18-4D 18” (90° Bend) Tray 7 lb
LT-V90-18-A 18” (90° Bend) Cover 4 lb
LT-C90-24-4D 24” (90° Bend) Tray 8 lb
LT-V90-24-A 24” (90° Bend) Cover 6 lb
LT-TJ-06-4D 6” (T-Junction) Tray 8 lb
LT-VTJ-06-A 6” (T-Junction ) Cover 6 lb
LT-TJ-09-4D 9” (T-Junction) Tray 9 lb
LT-VTJ-09-A 9” (T-Junction) Cover 6.5 lb
LT-TJ-12-4D 12” (T-Junction) Tray 10 lb
LT-VTJ-12-A 12” (T-Junction) Cover 7 lb
LT-TJ-18-4D 18” (T-Junction) Tray 11.5 lb
LT-VTJ-18-A 18” (T-Junction) Cover 7.5 lb
LT-TJ-24-4D 24” (T-Junction) Tray 13 lb
LT-VTJ-24-A 24” (T-Junction) Cover 8 lb

43
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Trays
Inside and Outside 90° Vertical Risers
Description:
• Each section includes splice plates and hardware
Part # Description Type Weight
• Matching cover listed below
LT-RI90-06-4D 6” (Inside Vert. Riser) Tray 4.5 lb

LT-VRI90-06-A 6” (Inside Vert. Riser) Cover 1.5 lb

LT-RI90-09-4D 9” (Inside Vert. Riser) Tray 5 lb

LT-VRI90-09-A 9” (Inside Vert. Riser) Cover 2 lb

LT-RI90-12-4D 12” (Inside Vert. Riser) Tray 6 lb

LT-VRI90-12-A 12” (Inside Vert. Riser) Cover 2.5 lb

LT-RI90-18-4D 18” (Inside Vert. Riser) Tray 7 lb

LT-VRI90-18-A 18” (Inside Vert. Riser) Cover 3.5 lb

LT-RI90-24-4D 24” (Inside Vert. Riser) Tray 8 lb

LT-VRI90-24-A 24” (Inside Vert. Riser) Cover 4.5 lb

LT-RO90-06-4D 6” (Outside Vert. Riser) Tray 4.5 lb

LT-VRO90-06-A 6” (Outside Vert. Riser) Cover 1.5 lb

LT-RO90-09-4D 9” (Outside Vert. Riser) Tray 5 lb

LT-VRO90-09-A 9” (Outside Vert. Riser) Cover 2 lb

LT-RO90-12-4D 12” (Outside Vert. Riser) Tray 6 lb

LT-VRO90-12-A 12” (Outside Vert. Riser) Cover 2.5 lb

LT-RO90-18-4D 18” (Outside Vert. Riser) Tray 7 lb

LT-VRO90-18-A 18” (Outside Vert. Riser) Cover 3.5 lb

LT-RO90-24-4D 24” (Outside Vert. Riser) Tray 8 lb

LT-VRO90-24-A 24” (Outside Vert. Riser) Cover 4.5 lb

44
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Trays
Straight Reducers
Description:
• Used to mate smaller width tray to larger widths
• Matching covers listed below

Part # Description Type Weight

248-12ST-06 12” to 6” Reducer Tray 1.2 lb

FS28-12ST-06 12” to 6” Reducer Cover 0.5 lb

248-12ST-09 12” to 9” Reducer Tray 1.3 lb

FS28-12ST-09 12” to 9” Reducer Cover 0.6 lb

248-18ST-12 18” to 12” Reducer Tray 1.8 lb

FS28-18ST-12 18” to 12” Reducer Cover 0.8 lb

248-24ST-12 24” to 12” Reducer Tray 1.8 lb

FS28-24ST-12 24” to 12” Reducer Cover 1.0 lb

248-24ST-18 24” to 18” Reducer Tray 1.8 lb

FS28-24ST-18 24” to 18” Reducer Cover 1.1 lb

45
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Trays
Channel Type Cover Connectors Ladder Hold-Down Clamp and Splice Plates
Description: Description:
• Heavy-duty cover hold down • Hold-down clamp accepts 1/2” hardware
• Use in high wind applications • Splice plates are included with ladder sections, but also available separately; sold in pairs and
• Minimum of three cover connectors required per 12’ cable tray section include hardware

Part # Description Weight

248-06-DC 6” Cover Connector 1.2 lb LT-SS-A

248-09-DC 9” Cover Connector 1.4 lb

248-12-DC 12” Cover Connector 1.6 lb

248-18-DC 18” Cover Connector 1.8 lb Part # Description Weight

248-24-DC 24” Cover Connector 2.0 lb 9131 Hold-Down Clamp 0.1 lb

LT-SS-A Pair of Straight Splices 1.8 lb

46
SitePro1.com • 1-888-438-7761
T-Mobile Approved Rooftop Step-Over Kits
Steel Step-Over Kits
Description:
• Sturdy steel construction
• Minimal bolt-together assembly
• 24” wide safety grated non-skid surfaces
• All parts hot-dip galvanized

Part # Description Weight

STEP48 Galvanized Steel Step-Over Kit 175 lb

48”

8 1/8”

13”

8 1/8”

41 1/2”

47
SitePro1.com • 1-888-438-7761
T-Mobile Approved Ice Shields
Ice Shields for Microwave Dishes
Description:
• Protect antennas from falling ice
• Mount to 4-1/2” pipe mount used for dish; 8’ and 10’ ice shields require separate 4-1/2” OD
pipe mounts
• Kits include ice shield and mounting hardware, do not include pipe mount
• Other sizes available

Part # Antenna Diameter Size Weight

ISMD4 4’ 48” x 62” 325 lb

ISMD6 6’ 72” x 62” 365 lb

ISMD8 8’ 96” x 62” 445 lb

ISMD10 10’ 120” x 62” 500 lb

48
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platforms
Ground Solution - MEP88-8SH32S1C Ground Solution - MEP1012-6LHS1C

Description: Description:
• 8’ x 8’ platform • 10’ x 12’ platform
• 8’ x 10’ full canopy • 10’ x 12’ full canopy
• Handrails • Handrails
• One step and six 12” x 12” small footpads • One step and twelve 18” x 18” large footpads

Sub Sub
Part # Size Components Part # Size Components
Assembly Assembly
(2) 4’ x 8’ Frame MEP48 (3) 4’ x 6’ Frame MEP46
(6) Small Footpad MPAD-S (3) 4’ x 4’ Frame MEP44
(6) 4’ Handrail MRAIL-4 (12) Large Footpad MPAD-L
MEP88- (2) 2’ Handrail M-RAIL-2 (4) 6’ Handrail MRAIL-6
8’ x 8’
8SH32S1C (1) Single Step MSTEP-1LD (4) 4’ Handrail MRAIL-4
(1) 4’ Entrance MOPEN-4 MEP1012-
10’ x 12’ (1) 4’ Entrance MOPEN-4
(1) 8’ x 10’ MPCOV810 6LHS1C
(5) Straight Splice MSPLICE-S
Platform Cover (4) Corner Splice MSPLICE-C
(1) Single Step MSTEP-1
(1) 10’ x 12’ MPCOV1012
Platform Cover

49
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platforms
8’ x 8’ Platform 10’ x 10’ Platform

Description: Description:
• Total Frame Capacity • Total Frame Capacity
• Distributed Deadload 22,400 lb • Distributed Deadload 20,050 lb
• Distributed Windload 5,980 lb • Distributed Windload 5,490 lb
• Channel Capacity (Critical Load Point) • Channel Capacity (Critical Load Point)
• Concentrated Deadload 4,000 lb • Concentrated Deadload 2,500 lb
• Concentrated Uplift 4,000 lb • Concentrated Uplift 2,500 lb
• Expanded Metal Capacity (Critical Load Point) • Expanded Metal Capacity (Critical Load Point)
• 2’ Panel Deadload 1,000 lb • 2’ Panel Deadload 1,200 lb
• 2’ Panel Uplift 1,000 lb • 2’ Panel Uplift 1,200 lb

Part # Size Components Sub Assembly Part # Size Components Sub Assembly

(4) 4’ x 4’ Frame MEP44 (2) 5’ x 7’ Frame, MEP57,

MEP88-4S 8’ x 8’
(9) Small Footpads MPAD-S MEP1010-7S 10’ x 10’ (2) 5’ x 3’ Frame, MEP53,
(9) Small Footpad MPAD-S

50
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platforms
Ladder Kits Step Kit without Handrails

MCHAIN

Description:
• Fixed steps allow for a standard 7” rise
Description: • Floating designs do not require ground connection
• Provide access onto a level deck
• Straight ladders require limited real estate
• Do not require MOPEN-4
• Feature anti-slip rungs
• Designed with 16” wide climb path with 24” top opening for easy access
• Optional back grab rail available
Platform
• MOPEN-4 must be used for ladder option Part # Width Description
Deck Height

Part # Width Description MSTEP-1LD 35-1/2” 9” - 14” 1-Step Direct Connect Stair Kit

MLADDER-1 16” 1 Rung Ladder Kit MSTEP-2LD 35-1/2” 14” - 23” 2-Step Direct Connect Stair Kit

MLADDER-3 16” 3 Rung Ladder Kit

MLADDER-5 16” 5 Rung Ladder Kit

MBRAIL Backing Rail Kit

MCHAIN Chain Guard Kit

51
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platforms
Step and Access Kits with Handrails
Description:
• Stairs allow for 5” - 7” vertical adjustment per step
• MOPEN-4 must be used for access points and handrail attachment
• Includes stairs, handrails, and hardware on 2-step, 3-step, and 4-step stairs

Platform
Part # Width Description
Deck Height
MSTEP-1 35-1/2” 9” - 14” Fixed Height Stair Kit

MSTEP-2 32” 14” - 23” 2-Step Adjustable Stair Kit

MSTEP-3 32” 19” - 34” 3-Step Adjustable Stair Kit

MSTEP-4 32” 24” - 43” 4-Step Adjustable Stair Kit

MOPEN-4 35-1/2” Access Point/Finishing Kit

52
SitePro1.com • 1-888-438-7761
T-Mobile Approved Handrails
Access Point/Finishing Kit Handrail Kits

Description: Description:
• MOPEN-4 must be used for handrail attachment • Select from multiple options to achieve ideal fit
• Splice kit required at each mating connection • Handrails designed to accept additional unistrut for equipment mounting
• IBC and OSHA compliant for maintenance traffic

Part # Description
Part # Size Description
MOPEN-4 Access Point/Finishing Kit
MRAIL-2 2’ x 42” 2’ Handrail Kit

MRAIL-4 4’ x 42” 4’ Handrai Kitl

MRAIL-6 6’ x 42” 6’ Handrail Kit

53
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platforms
Splice Connection Kits Square Strut

Interfit Design at top of handrail

does not require hardware
Allows for smooth
rail transitions

Description: Description:
• Splice kit required at each mating connection • Add strut to handrail to easily adapt to an equipment rack
• Kits include hardware for top, mid, and kick-plate connection

Part # Length
Part # Description UNT10 10’
MSPLICE-C Corner Connection Kit

MSPLICE-S Straight Connection Kit

54
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platforms
Ramp Kit
Description:
• Hinged design folds up when not in use to minimize use of real estate
• Capacity of 2,000 lb to allow for dolly and cabinet entry
• MRAMP-5 does not require MOPEN-4 for connection
• Recommended deck height of 4” - 19.5” (not to exceed 20 degree slope)
• Maximum allowable deck height 26” (not to exceed 30 degree slope)
• Use chain guard kit to secure access point and lock ramp in
place when in closed position
• Kit includes 4’ - 3” chain and hardware

MCHAIN

Platform
Part # Width Description
Deck Height
MRAMP-5 35-1/2” 4” - 26” Adjustable Ramp Kit

MCHAIN Chain Guard Kit

55
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platforms
8’ x 8’ Platform
Description:
• Build a custom platform by combining standard sections to obtain
the layout and features needed for your application
• Welded design for strength, durability, and ease of installation
• Standard hole spacing
• Base withstands 6,000 - 8,000 lb of distributed load
• Manufactured with structural grade #5 expanded metal

MEP42 MEP44

Part # Size Description

MEP42 4’ x 2’ Modular Equipment Platform Base

MEP44 4’ x 4’ Modular Equipment Platform Base

MEP46 4’ x 6’ Modular Equipment Platform Base

MEP48 4’ x 8’ Modular Equipment Platform Base

MEP53 5’ x 3’ Modular Equipment Platform Base

MEP57 5’ x 7’ Modular Equipment Platform Base

MEP46 MEP48

MEP53 MEP57

56
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platforms
Footpads and Leveling Kit (for sloped surfaces)
Description:

MPAD-S MPAD
• One footpad is required at each corner and at each base
section connection point
MPAD-L • For additional platform height add footpad extension kits
and footpad bracing kits
• Rubber mats recommended for rooftop applications
• Extension bracing kit includes the two end plates with
attaching hardware; order bulk angle separately and field
cut the diagonal braces for your application

MPAD-EX48
Deck Height
Part # PAD Size Description
Adjustment
MPAD-S 12” x 12” Small Footpad 13” - 18-1/2”

MPAD-L 18” x 18” Large Footpad 13” - 18-1/2”

MPAD-EX33 N/A Footpad Extension 27-1/2” - 32-1/2”

MPAD-EX48 N/A Footpad Extension 42-1/2” - 47-1/2”

MPAD-BRC N/A Footpad Extension Bracing Kit N/A

MLEVEL
• Allows for a 3 degree adjustment (5/8” per foot)
• Beveled washer designed to self level as you tighten connection

Part # Description
MLEVEL 3 degree Footpad Leveling Kit

MLEVEL

57
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platforms
Rubber Mats and Standard & Extended Jacks
Description:
MMAT
• Each footpad and jack requires rubber mats for rooftop applications
• Designed to protect the integrity of rooftop
• Manufactured from UV-resistant 1/2” thick rubber

MJACK and MJACK-EXT

• Jack must be placed on perimeter of structure only
• MJACK cannot be combined with center supports
• Base combinations with interior connections use MPAD support only
• Rubber mats recommended for rooftop applications

Part # Description
MMAT 1/2” x 18” x 18”

Deck Height
Part # Size Description
Adjustment
5,000 lb Side C Crank Jack
MJACK 12” x 12” 13" - 28"
w/ Small Footpad MJACK
5,000 lb Side Crank Jack
MJACK-EXT 18” x 18” 28” - 43”
Extended w/ Large Footpad

MJACK-EXT

58
SitePro1.com • 1-888-438-7761
T-Mobile Approved Ice Shields
Platform Cover Kits Platform Canopies

Now with pre-cut and

pre-drilled angles

Description:
• Protect cabinets and cables from falling debris or ice
• Constructed from 4” x 4” x 1/4” angles and 12 gauge grip strut
• Available with direct burial pipe columns or base shoe pipe
columns with wedge anchors
• Easy to install; no field cutting or drilling required

Description: Part # Size Pipes Weight

• Shield equipment from falling ice and debris COV610 10’ x 6’ 3-1/2” OD, 13’-4” Burial 715 lb
• Allow for 9’ cabinet height COV810 10’ x 8’ 3-1/2” OD, 13’-4” Burial 805 lb

COV1010 10’ x 10’ 3-1/2” OD, 13’-4” Burial 905 lb

Part # Description Weight
COV1012 10’ x 12’ 3-1/2” OD, 13’-4” Burial 975 lb
MPCOV610 6’ x 10’ Equipment Platform Cover Kit 895 lb
COV612 12’ x 6’ 3-1/2” OD, 13’-4” Burial 755 lb
MPCOV810 8’ x 10’ Equipment Platform Cover Kit 930 lb COV812 12’ x 8’ 3-1/2” OD, 13’-4” Burial 860 lb
MPCOV812 8’ x 12’ Equipment Platform Cover Kit 1,020 lb COV610-B 10’ x 6’ 3-1/2” OD, 10’-6” Base Shoe 690 lb

MPCOV1010 10’ x 10’ Equipment Platform Cover Kit 1,025 lb COV810-B 10’ x 8’ 3-1/2” OD, 10’-6” Base Shoe 780 lb

MPCOV1012 10’ x 12’ Equipment Platform Cover Kit 1,139 lb COV1010-B 10’ x 10’ 3-1/2” OD, 10’-6” Base Shoe 880 lb

COV1012-B 10’ x 12’ 3-1/2” OD, 10’-6” Base Shoe 950 lb

COV612-B 12’ x 6’ 3-1/2” OD, 10’-6” Base Shoe 730 lb

COV812-B 12’ x 8’ 3-1/2” OD, 10’-6” Base Shoe 835 lb

59
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Ladders
Cable Ladders
Description:

Cable Ladders
• Each 20’ section includes six waveguide brackets that are pre-punched
for snap-in hangers and butterfly hangers
• Hole pattern allows 40” (6 brackets per section)
or 60” (4 brackets per section) spacing
• 1-3/4” x 1-3/4” x 1/8” side rails
• Each kit includes splices to attach additional sections
• All parts are hot-dip galvanized
• Purchase attachment kits separately
(minimum of two kits required per 20’ ladder section)

Universal Ladder Attachment Kit

• Used to attach cable ladders to towers
• Use a minimum of two kits per 20’ section of ladder
• Kit includes two formed plate brackets and four J-bolt assemblies
• All parts are hot-dip galvanized

Part # # of Runs Length Width Weight

WCL4 4 20’ 14” 73 lb

WCL6 6 20’ 20-5/8” 77 lb

WCL9 9 20’ 29-5/8” 82 lb Part # Application Weight

WCL12 12 20’ 38-5/8” 88 lb CLK-U Universal (angles 2” - 5” & pipes 1” - 4-1/2”) 5 lb

60
SitePro1.com • 1-888-438-7761
T-Mobile Approved Ice Bridges
12” and 24” Grip-Strut Ice Bridge Kits With Triple-Tee Trapeze
Description:
IB24D-T3 and IB24B-T3
• Available in heavy-duty 12 gauge or lightweight 14 gauge grip strut
• Versatile triple-tee trapeze with all hardware included
• 24 runs
• Easy installation
• Three trapeze kits per bridge
• Complete kits

IB12D-T3 and IB12B-T3

• Versatile triple-tee trapeze with all hardware included
• 12 runs
• Easy installation
• Three trapeze kits per bridge
• Complete kits

IB24D-T3

IB12D-T3

Part # Size Poles Trapeze # of Runs Weight

IB24D-T3 24” x 10’, 12 Gauge 3-1/2” x 13’-4” Burial Triple Tee 24 390 lb

IB24B-T3 24” x 10’, 12 Gauge 3-1/2” x 10’-6” Base Shoe Triple Tee 24 370 lb

IB12D-T3 12” x 10’ 3-1/2” x 13’-4” Burial T-Bracket, 3 Level 12 315 lb

IB12B-T3 12” x 10’ 3-1/2” x 10’-6” Base Shoe T-Brackets, 3 Level 12 295 lb

61
SitePro1.com • 1-888-438-7761
T-Mobile Approved Ice Bridges
24” Grip-Strut Ice Bridge Kits With Vertical T-Bracket Trapeze
Description:
• Vertical T-bracket trapeze for easy installation
• Accept 18 snap-ins and can be installed side by side for 36 runs
• Three trapeze kits per bridge
• Complete kits

Part # Size Poles Trapeze # of Runs Weight

IB24D-V 24” x 10’ 3-1/2” x 13’-4” Burial VT-Brackets 18 365 lb

62
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platform Accessories
Equipment Racks
Description:
ER105D and ER106B
• Complete kits for all your equipment mounting needs
• Heavy-duty construction
• Include ten 10’ x 12 gauge galvanized unistrut rails
• Designed to space unistrut at 8” typical spacing but spacing is freely adjustable
• Available with direct burial or base shoe pipe columns
• Call for custom mounting solutions or kits

HF-556
• 2-7/8” x 6’ pipe risers
• Five levels of 1-5/8” x 5’ square strut
ER105D
• Galvanized

MER8-H and MER8-P

• Complete kits for all equipment mounting needs
• Heavy duty construction
• Include two 10’ galvanized unistrut rails
• Designed to space unistrut at 6” typical spacing but spacing is adjustable
ER106B

Part # Pipes Weight

ER105D 3-1/2” x 13’ 4” Direct Burial Pipes 420 lb

ER106B 3-1/2” x 10’ Base Shoe Pipes 400 lb

HF-556 H-Frame Equipment Rack 117 lb

Overall Deck
Part # Description
Size Length HF-556
H-Frame with handrail
MER8-H 8’ 8’
attachment kit
MER8-P
H-Frame with direct
MER8-P 8’ 8’
platform attachment kit

63
SitePro1.com • 1-888-438-7761
T-Mobile Approved Equipment Platform Accessories
Pipe Mount Kit Triple-Tee Trapeze Kits

Description: Description:
• Easily attach GPS, microwave, panel antennas and specialized • Easily installed and allows for adjustment of the angle brackets
stealth to handrail • Allows for neat installation by aligning cables with entry panel
• Mount pipe mast direct to handrail • Heavy-duty version resists wobble
• Accepts 1-1/2” to 5” pipes • Hot-dip galvanized
• Includes top and bottom clamp set and all hardware

Part # # of Runs Size Weight

Clamp Threaded Kit
Part # Pipe Size T24K-3 24 22” x 24-1/2” 18 lb
Thickness Rod Quantity
MPIPEM 1-1/2” - 5” 1/2” 5/8” x 18” Kit of 2

64
SitePro1.com • 1-888-438-7761
T-Mobile Approved Ice Bridges
Platform Ice Bridge Kits
Description:
• Shield equipment from falling ice
• Allow for 9’ cabinet height
• Can be used with or without platform handrails
• Expanded metal channels can be cut down for use with smaller platforms

MIBP-2410

Part # Description Weight

MIBP-2410 24” x 10’ Platform Ice Bridge Kit 375 lb

MIBP-2412 24” x 12’ Platform Ice Bridge Kit 385 lb

MIBP-2410L 24” x 10’ x 10’ L-Shaped Platform Ice Bridge Kit 595 lb

65
SitePro1.com • 1-888-438-7761
T-Mobile Approved Reinforcement Plates
Crossover Plate Kits
Description:
• Heavy-duty crossover plate kits are used to attach pipes in 90° fashion
• U-bolts and hardware included
• Hot-dip galvanized

SCX23-K

SCX45-K

Part # Smaller Pipe Size Larger Pipe Size Thickness Quantity

SCX1-K 2-3/8” 2-3/8” 3/8” 1 Plate, 4 U-Bolts & Hardware

SCX2-K 2-3/8” 2-7/8” 3/8” 1 Plate, 4 U-Bolts & Hardware

SCX3-K 3-1/2” 3-1/2” 3/8” 1 Plate, 4 U-Bolts & Hardware

SCX4-K 2-3/8” 4-1/2” 3/8” 1 Plate, 4 U-Bolts & Hardware

SCX6-K 2-7/8” 4-1/2” 1/2” 1 Plate, 4 U-Bolts & Hardware

SCX7-K 3-1/2” 4-1/2” 1/2” 1 Plate, 4 U-Bolts & Hardware

66
SitePro1.com • 1-888-438-7761
T-Mobile Approved Reinforcement Plates
Universal Crossover Plate Kits
Description:
• Accommodate the new sizes of antenna pipes being used today
• Universal feature removes any uncertainty in the field
• All hardware included
• Hot-dip galvanized

SCX7-U

FCX45-U

Smaller Pipe Larger Pipe Thickness

Part # Quantity
Size Size (Hdw Size)
1 Plate, 4 V-Clamps &
SCX6-U 1-1/2” to 2-7/8” 2-1/2” - 6” 1/2” (1/2”)
Hardware

1-1/2” to 1-1/2” to 1 Plate, 4 V-Clamps &

SCX7-U 1/2” (1/2”)
3-1/2” 4-1/2” Hardware

1-1/2” to 1-1/2” to 1 Plate, 4 V-Clamps &

SCX3-U 3/8” (1/2”)
4-1/2” 4-1/2” Hardware

1-1/2” – 1 Plate, 4 V-Clamps &

FCX45-U 1-1/2” – 4-1/2” 3/8” (5/8”)
4-1/2” Hardware

67
SitePro1.com • 1-888-438-7761
T-Mobile Approved Hardware
Pipe Support Cross Plates
Description:
• Heavy-duty saddle design prevents pipe rotation
• U-bolts included
• Hot-dip galvanized

SP216

SP219

Smaller Larger Pipe

Part # Contents
Pipe Size Size
SP219 2-3/8” 3-1/2” 1 Bracket, 4 U-bolts

SP219-H 2-7/8” 3-1/2” 1 Bracket, 4 U-bolts

68
SitePro1.com • 1-888-438-7761
T-Mobile Approved Pipe
Bulk Pipe
Description:
• Plain-end hot-dip galvanized pipe
• ASTM A53 Grade B Schedule 40
• Other sizes available, please inquire

Part # Length OD x Length (in)

P296 8’-0” 2-3/8” x 96”

P2126 10’-6” 2-3/8” x 126”

P2150 12’-6” 2-3/8” x 150”

P2174 14’-6” 2-3/8” x 174”

P2252 21’-0” 2-3/8” x 252”

P3096 8’-0” 2-7/8” x 96”

P30126 10’-6” 2-7/8” x 126”

P30150 12’-6” 2-7/8” x 150”

P30174 14’-6” 2-7/8” x 174”

P30252 21’-0” 2-7/8” x 252”

P396 8’-0” 3-1/2” x 96”

P3150 12’-6” 3-1/2” x 150”

P3150 3-1/2” x 150”

P3160 13’-4” 3-1/2” x 160”

P3174 14’-6” 3-1/2” x 174”

P3216 18’-0” 3-1/2” x 216”

P3252 21’-0” 3-1/2” x 252”

P472 6’-0” 4-1/2” x 72”

P4126 10’-6” 4-1/2” x 126”

P4252 21’-0” 4-1/2” x 252”

P3252-80 21’ 3-1/2” x 252”

69
SitePro1.com • 1-888-438-7761
T-Mobile Approved Ice Bridge Components
Pipe Columns
Description:
• 3-1/2” OD pipes, hot-dip galvanized
• Base shoe pipes include anchors and hardware
• 8” x 8” base with 11/16” holes on 5-1/2” centers
• Purchase post caps separately

Part # Type Size Weight

P3160 Direct Burial 3-1/2” x 13’-4” 102 lb

P3174 Direct Burial 3-1/2” x 14’-6” 111 lb

P3216 Direct Burial 3-1/2” x 18’ 138 lb

P3252 Direct Burial 3-1/2” x 21’ 161 lb

SP126 Base Shoe 3-1/2” x 10’-6” 95 lb

70
SitePro1.com • 1-888-438-7761
T-Mobile Approved Ice Bridge Components
Bolt-On Base Shoe Base Shoe Feet

BSF35

Description: Description:
• For use with 3-1/2” pipes • Convert any 2-7/8” or 3-1/2” OD pipe into a base shoe post
• 12” height x 6” width for stability • 8” x 8” x 1/2” base plate with 6” hole spacing
• Kit includes U-bolts • 11/16” holes for 5/8” anchors (sold separately)
• Purchase wedge anchors separately (p. 161) • Hot-dip galvanized
• Hot-dip galvanized
Part # Description Weight
Part # Description Weight
BSF35 Base Shoe Foot for 3-1/2” OD Pipe 15.0 lb
BSA300 Bolt-On Base Shoe 12.5 lb

SWA585 5/8” x 5” SS Wedge Anchors (3 req’d) 2.3 lb

GWA585 5/8” x 5” Galvanized Wedge Anchors (3 req’d) 2.3 lb

71
SitePro1.com • 1-888-438-7761
T-Mobile Approved Ice Bridge Components
Universal Cantilevers
Description:
• Universal hole pattern allows use on any type of channel
• For use with 3-1/2” OD pipe columns
• Kits include all hardware, U-bolts, and backing plates

HHD12-K

HHD24-K

Channel
Part # Description Weight
Width
HHD12-K 12” Complete Cantilever Kit 11.3 lb

HHD24-K 24” Complete Cantilever Kit 17.0 lb

72
SitePro1.com • 1-888-438-7761
T-Mobile Approved Ground Bars
MG210U and MG412U
Description:
MG210U
• Accepts 3/8” lugs
• 20 holes allow up to 10 runs
• Universal hole pattern accepts two-hole lugs with 3/4” to 1” hole spacing
• Kits include insulators and stainless steel mounting brackets

MG210U
MG412U
• Accepts 3/8” lugs
• 52 holes allow up to 26 runs with two-hole lugs
• Universal hole pattern accepts two-hole lugs with 3/4” to 1” hole spacing
• Kits include insulators and stainless steel mounting brackets

MG412U-K

Part # Description Weight

MG210U 1/4” x 2” x 10” Ground Bar Only 1.4 lb

1/4” x 4” x 12” Ground Bar with

MG412U-K 4.2 lb
Insulators and Brackets

73
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Support Bars
Cable Support Bar
Description:
• Galvanized steel construction
• Mounts to round legs 2-3/8” to 4-1/2” in diameter
• Lower weight than competitive alternatives
• Double number of connections with Extra Bar kits
• 3/4” holes accept low PIM snap-ins
• Highly configurable

900352-01

900353-02

Part # Description
900352-01 Pole Mount Kit, 13-Position

900352-02 Pole Mount Kit, 13-Position, Extended Range 900353-02 with 900355 Extra Bar Kit

900353-01 Cable Support Bar, Pole Mount Kit, 22 Position

Cable Support Bar, Pole Mount Kit, 22 Position, Extended

900353-02
Range

900354 Cable Support, Extra Bar Kit, 13 Position

900355 Cable Support, Extra Bar Kit, 22 Position

74
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Support Bars
PIM Mitigating Multi-Run Cable Support Kit
Description:
• Mounts to round legs
• Stands off less than 12”
• Hot-dip galvanized

# of Snap-In Round
Part # Weight
Holes Member Size
RRU-UT12 12 1-1/2” – 3-1/2” 9.5 lb

75
SitePro1.com • 1-888-438-7761
T-Mobile Approved T-Bracket
Super Universal Double T-Bracket
Description:
• Mount to round or angle legs
• DBT1200 stands 18” off tower leg and supports up to 24 runs
of cable using snap-in hangers
• DBT1800 stands 26” off tower leg and supports up to 36 runs
of cable using snap-in hangers
• Hot-dip galvanized

# of Snap- Round 60° Angle 90° Angle

Part # Weight
In Holes Member Size Leg Leg

DBT1200 24 1-1/2” - 6” 2-1/2” - 8” 2-1/2” - 5” 12.5 lb

76
SitePro1.com • 1-888-438-7761
T-Mobile Approved Adapters
3-Way Universal Standoff Adapters Universal Angle Adapters

Description: Description:
• Weather-resistant nylon material • Weather-resistant nylon material
• Mount to round or flat members • Includes two 3/4” accessory mounting holes
• Include 3/4” and 3/8” accessory mounting holes • Torque-stop set bolt ensures proper attachment force
• Slots for 1/2” to 5/8” hose clamps, cable ties, or banding

Part # Size U of M Part # Description U of M

PIMTRAP 3-7/16” x 2-1/8” x 1-5/8” 10 pack PAA-U Nylon Angle Adapter 10 pack

77
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Support Base
Multi-Function Cable Support Base
Description:
• Cost efficient
• UV stable, glass-filled nylon construction
• Mounts to angle or round members using low PIM acetal straps
• 3/8” accessory mounting hole
• 3/8” stainless steel nut included

Part # Description U of M
901043-10 Multi-Function Cable Support Base 10 pack

78
SitePro1.com • 1-888-438-7761
T-Mobile Approved Snap-in Adapters
Multi-Function Snap-in Adapter
Description:

Multi-Function Snap-in Adapter 1 Position

• Cost efficient
• UV stable, glass-filled nylon construction
• Mounts to angle or round members using low PIM acetal straps
• 3/4” accessory mounting hole

901044-10 Multi-Function Snap-in Adapter 2 Position

• Cost efficient
• UV stable, glass-filled nylon construction
• Mounts to angle or round members using low PIM acetal straps
• Two 3/4” and one 3/8” accessory mounting holes
• 3/8” nut not included

901045-10

Part # Description U of M
901044-10 PIM Shield Multi-Function Snap-in Adapter, 1 Position 10 pack

901045-10 PIM Shield Multi-Function Snap-in Adapter, 2 Position 10 pack

79
SitePro1.com • 1-888-438-7761
T-Mobile Approved Standoff Adapters
Standoff Adapters
Description:
• Attach with nylon cable ties, plastic round-member adapters, or acetal banding
• PSK is for use with cable blocks
• Accept 3/8” standard nut to allow threaded rod attachment
• Hold up to 3 cable blocks
• Fit on round or flat members
• SA1C is for use with snap-in hangers

PSK

SA1C

Part # Description U of M

PSK Plastic Standoff Adapter 10 pack

SA1C Standoff Adapters 10 pack

80
SitePro1.com • 1-888-438-7761
T-Mobile Approved Hybrid Snap-In Hangers
Hybrid Snap-In Hangers
Description:
• Patented “Hybrid” snap-in design provides insulation at the mating interfaces to prevent
metal-to-metal contact
• High strength
• Easy to install, remove and reposition
• No tools required
• 360° rotation at mounting interface

PSHS-1319 PSHS-4852

Part # Description U of M

PSHS-1319-10 Hybrid Snap-In, 13 to 19 mm, (1/2 in) 10 pack

PSHS-2630-10 Hybrid Snap-In, 26 to 30 mm, (7/8 in) 10 pack

PSHS-3642-10 Hybrid Snap-In, 36 to 42 mm, (1-1/4") 10 pack

PSHS-4852-10 Hybrid Snap-In, 48 to 52 mm, (1-5/8") 10 pack

81
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Blocks & Hardware Kits
Cable Block Hardware Kits Cable Blocks

Description: Description:
• 3/8” Grade 304 stainless or A36 galvanized steel • Manufactured from glass-filled polypropylene for long-term UV-
• Each kit contains: resistance
• 10 threaded rods • Interior ribs, combined with increased width, supply superior
cable retention
• 30 flat washers
• 30 lock washers
• 30 nuts Part # Cable Size & Type U of M Weight
• See below chart for applications and pricing CXB4 Fiber Kit (4-6mm) 10 pack 1.3 lb

CXB38 3/8” Cables & LMR-400 10 pack 0.3 lb

Part # Length Material Weight
CXB12 1/2” Corrugated 10 pack 0.6 lb
CH80 8” Rods Stainless Steel 2.9 lb
CXB78 7/8” Corrugated 10 pack 1.0 lb
CH120 12” Rods Stainless Steel 3.8 lb
CXB114 1-1/4” Corrugated 10 pack 3.0 lb

CXB158 1-5/8” Corrugated 10 pack 2.7 lb

82
SitePro1.com • 1-888-438-7761
T-Mobile Approved Tie Wraps and Cable Ties
Acetal Tie Wraps Hook & Loop Cable Ties

Description: Description:
• Acetal heavy-duty cable ties • Industrial grade pre-cut straps
• 1/2” width • Hook on one side, loop on the other
• UV-resistant • Reusable
• 400 lb loop tensile strength • Attaches to itself for fast and easy bundling
• Use with acetal installation tool • Made in USA

Part # Description U of M Part # Size Package Quantity Weight

TW16 16” Acetal Tie Wrap Bag of 50 HLCT12X8 1/2” x 8” 100 0.01 lb

83
SitePro1.com • 1-888-438-7761
T-Mobile Approved Cable Block Hardware Kits
PIM Free Isolator for Snap-In Hangers
Description:
• Reduce PIM by avoiding metal-to-metal contact for
snap-in hangers
• Isolator snaps between hangers and mounting surface and
between stacked hangers
SA-ISO shown with
snap-in hanger

Part # Description U of M
SA-ISO PIM Free Isolator for Snap-In Hangers 10 pack

84
SitePro1.com • 1-888-438-7761
T-Mobile Approved PIM Mitigation Paint and Caulk
PIM Mitigation Paint and Caulk
Description:

PIM Mitigation Paint

• PIM mitigation paint is a conductive acrylic polymer with enhanced elasticity designed
to reduce external passive intermodulation (PIM) at cellular base stations. The paint is
intended for large, flat surfaces and should NOT be applied directly to antenna mounting
structures.
• High RF attenuation
• Crack resistant
• UV stable acrylic
• Water based
• Non-flammable
• Gallon can ships with special protective packaging
• Five gallon can must ship on a pallet

PIM Mitigation Caulk

• PIM mitigation caulk is a thickened version of PIM paint that can be used to fill gaps and seal RF
from reaching PIM sources generated at contacting surfaces
• Forms a highly elastic seal that resists cracking

901087-5 901087-1-PKG

Part # Description
901087-1-PKG PIM Shield PIM Mitigation Paint, 1 Gallon

901087-5 PIM Shield PIM Mitigation Paint, 5 Gallon

901088 PIM Seal PIM Mitigation Caulk, 10.1 oz tube

901088

85
SitePro1.com • 1-888-438-7761
T-Mobile Approved PIM Blankets
PIM Blankets PIM Tape

Description: Description:
• ConcealFab’s PIM blankets are temporary RF barriers used to suppress PIM sources • PIM tape is a rapidly deployable RF barrier able to bond to a wide variety of surfaces
during the PIM hunting process including metals, single-ply roofing, multi-ply roofing, concrete, brick and wood.
• PIM Barrier • PIM Barrier
• High RF attenuation • High RF attenuation
• Heavy duty vinyl construction • UV stable TPO outer protective layer
• Integrated tie-down loops • High tack synthetic resin adhesive
• Silicone release liner

Part # Description
Part # Description
007640-030030 PIM Blanket, 30” x 30”
008587-06-25-B PIM Tape, 6” x 25’ roll, black
007640-060030 PIM Blanket, 60” x 30”
008587-06-25-W PIM Tape, 6” x 25’ roll, white
007640-060060 PIM Blanket, 60” x 60”
008587-12-25-B PIM Tape, 12” x 25’ roll, black
007640-120060 PIM Blanket, 120” x 60”
008587-12-25-W PIM Tape, 12” x 25’ roll, white

86
SitePro1.com • 1-888-438-7761
© 2024 Valmont Telecommunications, Inc. All Rights Reserved.
Valmont and Site Pro 1 are registered trademarks of Valmont Industries,
Inc. V2.3 Latest Update 12/23