Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    Edb 1534068 GBR en

    Uploaded by

    Luís Felipe Moreira Teixeira
    Manual do Inclinometro

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Edb 1534068 GBR en

    Uploaded by

    Luís Felipe Moreira Teixeira
    8 views3 pages
    Manual do Inclinometro

    Original Title

    edb_1534068_gbr_en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Manual do Inclinometro

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views3 pages

    Edb 1534068 GBR en

    Uploaded by

    Luís Felipe Moreira Teixeira
    Manual do Inclinometro

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    B1N360V-Q20L60-2LI2-H1151

    Inclinometer
    Features

    ■Rectangular, plastic, PC
    ■Compact housing
    ■Connection via M12 × 1 male
    ■Response time 0.1 s
    ■10…30 VDC
    ■Two counter-running 4 … 20mA analog out-
    puts improve machine safety through redun-
    dancy

    Wiring diagram

    Technical data

    Type B1N360V-Q20L60-2LI2-H1151
    ID 1534068
    Measuring principle Acceleration
    General data
    Measuring range 0…360 °
    Number of measuring axes 1
    Mounting conditions Vertical
    Repeatability ≤ 0.2 % of measuring range |A - B| Functional principle

    B1N360V-Q20L60-2LI2-H1151| 01-12-2022 12-27 | Technical modifications reserved


    Linearity deviation ≤ 0.6 %
    The TURCK inclinometers incorporate a
    Temperature drift ≤ ± 0.05 % / K micromechanical pendulum, operating on the
    principle of MEMS technology (Mikro Elektro
    Resolution ≤ 0.14 ° Mechanic Systems).
    The pendulum basically consists of two 'plate'
    Electrical data electrodes arranged in parallel with a dielectric
    Operating voltage 10…30 VDC placed in the middle. When the sensor is
    inclined, the dielectric in the middle moves,
    Isolation test voltage ≤ 0.5 kV causing the capacitance ratio between both
    electrodes to change.
    Short-circuit protection yes The downstream electronics evaluates this
    change in capacitance and generates a
    Wire breakage/Reverse polarity protec- yes / Complete corresponding output signal.
    tion
    Output function 5-pin, Analog output
    Current output 4…20 mA
    2 outputs, one for CW and one for CCW
    Load resistance current output ≤ 0.2 kΩ
    Response time 0.1 s
    Time for the output signal to reach 90%
    of the adjusted measuring range
    Current consumption 50…105 mA (voltage-dependent)
    Mechanical data
    Design Rectangular, Q20L60
    Dimensions 60 x 30 x 20 mm

    Hans Turck GmbH & Co. KG | 45466 Mülheim an der Ruhr, Germany | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com 1|3
    Technical data

    Housing material Plastic, PC


    Electrical connection Connector, M12 × 1
    Environmental conditions
    Ambient temperature -30…+70 °C
    Vibration resistance 55 Hz (1 mm)
    Shock resistance 30 g (11 ms)
    Protection class IP68
    IP69K
    MTTF 203 years acc. to SN 29500 (Ed. 99) 40
    °C

    Mounting instructions

    Mounting instructions/Description

    Adjusting the measuring range via TX1-


    Q20L60 teach adaptor
    Setting the angular range in CW direction:
    1. Move sensor to start position
    2. Press and hold Teach-Gnd until the output
    is set to 4 mA (approx. 1 s)
    3. Move sensor to end position
    4. Press and hold Teach-Gnd until the output
    is set to 20 mA (approx. 3 s)
    Resetting the angular range:
    1. Press and hold Teach-Gnd until the output
    is set to 12 mA (approx. 6 s)
    2. Angle measurement is set back to 360°
    degrees (in position "connector outgoing
    topwards" the sensor provides an output

    B1N360V-Q20L60-2LI2-H1151| 01-12-2022 12-27 | Technical modifications reserved


    signal in accordance with 0° degrees)

    Accessories

    GUARD-Q20L60 A9684
    Protective housing for Q20L60
    inclinometers for protecting against
    mechanical impact; material:
    Stainless steel

    Hans Turck GmbH & Co. KG | 45466 Mülheim an der Ruhr, Germany | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com 2|3
    Accessories

    Dimension drawing Type ID


    TX1-Q20L60 6967114 Teach adapter for inductive encoders,
    linear position, angle, ultrasonic and
    capacitive sensors

    B1N360V-Q20L60-2LI2-H1151| 01-12-2022 12-27 | Technical modifications reserved

    Hans Turck GmbH & Co. KG | 45466 Mülheim an der Ruhr, Germany | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com 3|3

    You might also like