Comtech ELEVATE 200 592024
Comtech ELEVATE 200 592024
Comtech ELEVATE 200 592024
Key Features:
Comtech ELEVATE is a scalable, reliable, software-defined solution that
brings together the best of Comtech’s popular Heights and MF-TDMA
VSAT platforms in a first-of-its-kind leading-edge architecture featuring D- ▪ Dynamic Return Access Modes (D-RAM)
automatically and seamlessly selects MF-
RAM (Dynamic Return Access Modes) that allows dynamic seamless TDMA or H-DNA return access schemes
shifting between MF-TDMA and H-DNA waveforms. Comtech’s software-
▪ Two independent DVB demodulators with
defined technology allows the creation of private VSAT Networks of any
separate software-switchable IF inputs and
size and topology with unlimited potential for future development. rate up to 500 Msps
Comtech ELEVATE CEL-200 is a universal VSAT router with Software- ▪ Efficient DVB-S2/S2X ACM modulations
Defined Architecture. The device packs industry-highest processing with 5% or 20% roll-off and support for
wideband HTS transponders
capability into a very compact size with power consumption under 12W. It
can process up to 450 Mbps of aggregate traffic. CEL-200 comprises two ▪ Multichannel MF-TDMA demodulators and
proven efficiency of >97% vs. SCPC
DVB demodulators, four TDMA burst demodulators, a universal TDMA/H-
DNA/SCPC modulator and a powerful IP router capable of processing over ▪ Multiple demodulators allow simultaneous
190,000 IP packets per second (PPS). The high processing capability reception of two DVB (TDM or SCPC)
carriers and a group of MF-TDMA carriers
allows implementation of uniquely efficient protocols for network access,
resource allocation and data encapsulation as well as support for advanced ▪ Adaptive coding and modulation (ACM) in
MODCODs. forward and return channels, including
SCPC and D-RAM modes
as a star or mesh remote or as a Tx/Rx SCPC IP modem, or as a node in a ▪ 1:1 automatic redundancy without external
Hubless TDMA (full mesh) network, or as a building block (universal controllers or M:N Smart Redundancy
controller) in a large TDM/D-RAM HTS Hub. This unique device can even ▪ Highest reliability with over 200 000 hours
implement multiple access protocols and sophisticated QoS, so that it can MTBF
work as a fully-fledged TDM/TDMA Hub with one Outroute TDM and Multi-
▪ H-DNA (High – efficiency Dynamic SCPC
Carrier Inroute Controller (IC) capable of receiving up to 8 TDMA carriers. Network Access)
Comtech ELEVATE CEL-200 router can switch on-the-fly between the
modes, using any of the 8 configuration profiles stored in the device.
Standard DVB-S2 / DVB-S2X ACM DSCP, multiple IP/VLANs, PAT, proxy ARP, L2
Support Bridging, TCP & GTP Acceleration, Jumbo
Channels 2 with selectable IF inputs frames (2KB MTU), AES-256, X.509
MODCODs QPSK to 256APSK 8-level prioritization, traffic policies, CIR, MIR,
QoS
Symbol Rate 300 ksps - 500 Msps group QoS, hierarchic traffic shaper, FAP
MODCODs BPSK, QPSK, 8PSK, 16APSK / LDPC Sweep time 1-2 sec
Symbol Rate 100 ksps to 11 Msps. MF Hopping Span Span 10 kHz - 1200 MHz; accuracy: ±1.8%
Multi-frequency Fast MF hopping Measurement range 30 dB; Accuracy: ±6 dB; Relative: ±0.15 dB
Humidity,
Weight, Operating
Model Housing Dimensions, mm Operating voltage non-
kg temperature
condensing
CEL-200 Compact 147x30x144 0.5 24 VDC or 100-240 VAC, 10W 0…+50 ℃ Up to 95%
CEL-230 Rackmount 440x44x170 1.7 24 VDC or 100-240 VAC, 10W 0…+50 ℃ Up to 95%
CEL-240 Dual 440x44x170 2.0 24 VDC or 100-240 VAC, 20W 0…+50 ℃ Up to 95%
Comtech reserves the right to change specifications of products described in this document at any time without notice and without obligation to notify any person of such changes. Information in this
document may differ from that published in other Comtech documents. Refer to the website or contact Customer Service for the latest released product information.