Control System Kec602
Control System Kec602
Control System Kec602
BTECH
(SEM VI) THEORY EXAMINATION 2021-22
CONTROL SYSTEM
SECTION A
1. Attempt all questions in brief. 2*10 = 20
Q. Questions CO
No
(a) Compare any four differences between close loop and open loop system. 1
(b) Draw the Elementary Block Diagram of open loop and close loop system. 1
(c) Enlist the condition for a system to be controllable. 2
(d) List any two advantages of space state model over transfer function model. 2
(e) Define Settling time and Maximum peak overshoot. 3
(f) Define Rise time and Peak Time. 3
(g) Illustrate how the location of poles of a system related to stability. 4
(h) Describe the Angle of Departure. 4
(i) Define Gain Cross Over Frequency. 5
90
1
(j) Enlist the significant of Polar plot. 5
13
_2
SECTION B
2.
P1
24
Q. Questions CO
2E
5.
No
.5
P2
(a) Obtain overall Transfer function for the given block diagram shown in Figure 1
17
using Block reduction Method:
Q
|1
3 0
8:
:2
13
2
02
(b) Construct the state space model for the system described by the differential 2
-2
equation below. The output matrix should be independent of input and be able
to measure each state variable.
06
7-
|1
(c) The system shown in fig(a) when subjected to a unit step input, the output 3
response is shown in fig(b). Determine the value of K & T from the response
curve.
BTECH
(SEM VI) THEORY EXAMINATION 2021-22
CONTROL SYSTEM
fig.(a) fig.(b)
(d) Using Routh Hurwitz Criterion, discuss the stability of the characteristic 4
equation:
(e) A single loop feedback control system has open loop transfer function G(s) 5
H(s) = .Sketch the Nyquist plot.
90
1
13
SECTION C
_2
2.
P1
Q. Questions CO
24
No
2E
5.
(a) For the system shown in Figure, obtain the transfer function by signal flow 1
graph method.
.5
P2
17
Q
|1
30
8:
:2
13
(b) Using Mason’s gain formula, evaluate the overall transfer function: 1
2
02
-2
06
7-
|1
BTECH
(SEM VI) THEORY EXAMINATION 2021-22
CONTROL SYSTEM
=
(b) Examine the Controllability and Observability of the following system: 2
Where ‘K’ & ‘T’ are positive constants. By what factor should the amplifier
gain be reduced so that the peak overshoot of unit step response of the
90
1
system is reduced from 75% to 25%.
13
_2
(b) Evaluate the unit step response with proper derivation for an under damped 3
2.
2nd order system.
P1
24
6. Attempt any one part of the following: 10*1 = 10
2E
5.
Q. Questions CO
.5
P2
No
17
(a) For a unity feedback system of O.L.T.F is given by 4
Q
|1
0
Q. Questions CO
No
|1
(a) Sketch the Bode Plot for the given system and comment on stability of the 5
used systems:
4
𝐺 𝑠 𝐻 𝑠
𝑠 1 0.5𝑠 1 0.08𝑠
(b) S Sketch the Bode Plot for the given system and comment on stability of the 5
used systems:
30
𝐺 𝑠 𝐻 𝑠
𝑠 1 0.5𝑠 1 0.08𝑠