100vline Lou Speaker Cat

Download as pdf or txt
Download as pdf or txt
You are on page 1of 28

Professional 100v Line Loudspeaker Solutions

Introduction
CIE-Group one of the UKs most experienced suppliers of high quality Commercial Sound and AV products are the exclusive UK supply partners for many of the industrys most respected professional installation audio brands. By combining IC Audio, Atlas Sound and Majorcom products, our customers benefit from a complete range of quality, reliable 100v line loudspeaker options to meet the most diverse and demanding of commercial audio installations for voice, background music and AV. Within many leading supermarkets, stores, airports, bus & train terminals, sports & education applications and acoustically challenging areas such as distribution, manufacturing and public access areas; you will find high quality, trusted sound reinforcement from IC Audio, Atlas Sound and Majorcom loudspeakers.

T: 0115 9770075 F: 0115 9770081

E: [email protected] W: www.cie-group.com

Professional 100v Line Loudspeaker Solutions

Contents
Majorcoms IMC250T Omni-Directional Loudspeakers provide effective sound dispersion in open, reflective spaces.

05~09 Omni Directional 10~16Horns & Projectors 17~20 Ceiling Speakers 21 22 23 Fashion Speakers VA Compliant Volume Controls

24~26 Installation Advice & Information 27 Rackbuild Design & Build Facility

04

Exclusive UK Supply Partners


CIE-Group are the exclusive UK supply partners for IC Audio, Atlas Sound and Majorcom loudspeakers. Key to CIE-Groups success is our absolute commitment to both the quality of product and service to our customers; reflected by our team of pre- and post-sales technical advisors, UK-based stockholding, service & repair and our Rack Design & Build Service consistently producing some of the UKs highest quality, ready-to-install PA racks to your own specifications (see page 27 for further information).
The close relationship between manufacturers, our customers and CIE-Group also ensures direct access to an expert team of sales, training and technical advisers, as well as showroom and demonstration facilities

Engineering
CIE-Groups technical and aftersales service department provides system advice, service, repair and re-manufacture facilities to ensure a unique UK-based, fast and efficient resource.

Demonstrations

Our dedicated team of sales and technical support staff are also on hand to provide full product and user training either at our own facilities or on-site.

Showroom Professional 100v Line Loudspeaker Solutions


Our showroom, centrally located in Nottingham, gives customers and clients immediate access to over 200 of our key products.

100v Line Loudspeakers - Omni Directional

05

B170T EN: 6W Suspended Ball Speaker


Compact, metal Suspended Ball Speaker ideal for retail, warehouse and open plan applications. Termination is made by binding posts and tappings controlled via a screwdriver-adjustable switch. The products two-way driver gives excellent voice and music reproduction.

Features:
Compact size Binding post terminal connection Adjustable tapping selector Suspension eye White RAL9010 colour Two-way, full-range driver 100v Power Tappings

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Approx. coverage Dimensions Weight

B170T EN:
2, 4, 6W 100Hz ~ 15kHz 89dB White Metal 45m @ 3m height 170() x 138(H) mm 1.3kg 134() mm 170() mm 138mm Suspension Eye Connection Terminals

www.cie-group.com

06

100v Line Loudspeakers - Omni Directional

B250T EN: 15W Suspended Ball Speaker


The industry standard for the distribution and retail shed sectors, the B250T EN offers excellent voice clarity and music reproduction. The unit features a 17cm bass unit with coaxial tweeter, within a robust, yet lightweight ABS housing. Cable termination is via binding posts and tappings adjusted via multi-step switch. The unit is supplied with a suspension eye for safety and security.

Features:
Lightweight ABS construction Screw terminal connection Suspension eye White colour Full range coaxial driver 100v Power Tappings

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Approx. coverage Dimensions Weight

B250T EN:
5, 7, 15W 70Hz ~ 20kHz 91dB White ABS 60m @ 4.5m height 250() x 208(H) mm 3.5kg 175() mm 250() mm Wattage Adjustment 208mm Suspension Eye Connection Terminals

www.cie-group.com

100v Line Loudspeakers - Omni Directional

07

IMC250T EN: 30W Omni-suspended Loudspeaker


Using a parabolic dish to distribute the sound over a larger area, the IMC250T EN is ideal in larger retail outlets, shopping centres, distribution warehouses, etc. Screw terminals and adjustable wattage selection are standard features of this cost effective choice, which provides up to 5 times more coverage than conventional loudspeakers. Supplied with suspension eye for safety and security.

Features:
ABS (Ball) / Metal (Dish) Screw terminal connection Suspension eye White colour Full-range, two-way driver 100v Power Tappings

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Approx. coverage Dimensions Weight

IMC250T EN:
10, 20, 30W 70Hz ~ 20kHz 90dB White ABS/Metal 200m @ 6m height Ball 250() / Dish 450() x 240(H) mm 3.5kg 450() mm 250() mm Wattage Adjustment 240mm Suspension Eye Connection Terminals

www.cie-group.com

08

100v Line Loudspeakers - Omni Directional

IMC300T / IMC400T: 30W, 60W Low Profile Omni-suspended Loudspeakers


Offering the same advantages as the IMC250TEN, the IMC300T/400T models are designed for installation in environments with lower height ceilings such as car parks and mezanine areas, but are just as effective in regular installations. Fitted with 3-way loudspeaker systems, both models offer HiFi quality sound.

Features:
ABS (Ball) / Metal (Dish) Multicore termination Multi-suspension points White colour HiFi quality sound 100v Power Tappings Low profile

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Approx. coverage Dimensions Weight

IMC300T:
10, 20, 30W 50Hz ~ 20kHz 89dB White ABS/Metal 200m @ 6m height 490() x 220(H) mm 4.5kg

IMC400T:
20, 40, 60W 50Hz ~ 20kHz 89dB White ABS/Metal 300m @ 6m height 490() x 220(H) mm 5.0kg

220mm

380() mm 490() mm

www.cie-group.com

100v Line Loudspeakers - Omni Directional

09

IMC500T: 120W Omni-suspended Loudspeaker


Largest of the Omni Series, the IMC500T is at home covering large areas such as sports halls, ice rinks, large warehouses, exhibition halls, etc. This speaker provides a full range of music and high intelligibility voice reproduction; ideal for large scale, acoustically challenging environments.

Features:
ABS Screw terminal connection Suspension eye White colour Full range two-way driver 100v Power Tappings

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Approx. coverage Dimensions Weight

IMC500T:
60, 120W 50Hz ~ 20kHz 97dB White ABS 500m @ 7m height 673() x 480(H) mm 15kg 482() mm 673() mm 480mm

www.cie-group.com

10

100v Line Loudspeakers - Horns & Projectors

AP15T / AP30T: 15W, 30W Re-entrant Horn Loudspeakers


Renowned as the leading industry standard paging horn series, AP15T/30T horns are utilised in many applications such as transport terminals, industrial paging, marine, nuclear and warning systems throughout the world. Robust metal / ABS construction, multi-tapping wattage selection, flexible mounting brackets and full weather resistance for outdoor use completes the package.

Features:
Weather / ingress resistance (IP67 rated when used with the BX range of glands) Robust metal/ABS construction Screwdriver adjustable Tappings High intelligibility Optional Gland / Termination - (BX1G for AP30T / BX2G for AP15T)

Specifications:
Model:
100v Power Tappings Frequency Response SPL @1w/1m Colour Material Dimensions Weight

AP15T:
2, 4, 7.7, 15W 400Hz ~ 14kHz 106dB Grey Metal 200(H) x 200(W) x 237(D) mm 2.27kg

AP30T:
4, 7, 15, 30W 300Hz ~ 12kHz 108dB Grey Metal 254(H) x 254(W) x 267(D) mm 2.86kg

AP15T: 200mm AP30T: 254mm

AP15T: 237mm AP30T: 267mm

AP15T: 200mm AP30T: 254mm

www.cie-group.com

11

DK15T / DK30T: 15W, 30W Re-entrant Horn Loudspeakers


The DK Horn loudspeaker range is ideal for indoor and outdoor applications requiring high intelligibility and clarity in paging, warning and information systems. IP66 approved, the units offer multi-tapping, 100v line transformer options as well as a Low Z, 20W setting.

Features:
Weather / ingress resistance (IP66 rated) Robust ABS material Rotary 100v power tapping selector 1m cable (glanded) High SPL

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Dimensions Weight

DK15T:
1.87, 3.75, 7.5, 15W 300Hz ~ 12.5kHz 107dB Grey RAL7035 ABS 207() x 273(D) mm 1.9kg

DK30T:
5, 10, 20, 30W 300Hz ~ 6kHz 110dB Grey RAL7035 ABS 238() x 302(D) mm 2.6kg

McShed Distribution Centre


As part of a 1.5 million electrical fit-out into a newly-built McShed Distribution Centre, a range of IC Audio loudspeakers have been specified throughout to meet the acoustic requirements of the varying departments.
DK15T: 207() mm DK30T: 238() mm

The Centre features DK15T Horns in the plant rooms, DL06-165T Ceiling Speakers in the office areas and IP-65-rated DAP20 Projectors throughout the warehouse areas.

DK15T: 273mm DK30T: 302mm

12

100v Line Loudspeakers - Horns & Projectors

CJ-46: Wide Dispersion Horn/Flare Assembly


Extensively used in stadiums and outdoor events, the CJ46 offers maximum sound penetration in adverse sound conditions. Units can be mounted individually or grouped / clustered and securely fixed using the heavy duty bracket. Standard 13 8 / 35mm thread allows the fitting of most industry-standard compression drivers (HD-35 / HD-50 recommended).

HD35 / HD50: 35W & 50W Compression Driver Assemblies


Supplied with industry standard 13 8 / 35mm threads, the HD35 and HD50 are compatible with most flares and horns on the market. Manufactured from cast aluminum and ABS, the units are robust and weatherproof. Multi-tappings 100v transformers and field replaceable voice coils complete the package.

Features:
Robust glass fibre / metal construction Environment resistant for both indoor and outdoor use Fully serviceable components Operational temperature range of -35 ~ +66C Multi-position mounting bracket

Features:
Robust ABS construction 100v power tapping options Field replaceable voice coils (HDVC35 / HDVC50)

Specifications:
Model:
Colour Dispersion Dimensions Weight

Specifications:
CJ-46:
Black 120 x 60 558(W) x 305(H) x 432(D) mm 6.58kg

Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Dimensions Weight

HD35:
10, 15, 20, 35W 510Hz ~ 3.27kHz 113dB Grey RAL9007 Aluminium / ABS 108() x 152(D) mm 2.5kg

HD50:
15, 30, 50W 319Hz ~ 2.96kHz 111.5dB Grey RAL9007 Aluminium / ABS 138() x 148(D) mm 2.9kg

305mm 108mm
HD35

138mm
HD50

432mm

558mm

152mm

148mm

100v Line Loudspeakers - Horns & Projectors

13

DK-MH 30/T PLUS: Outdoor Music Horn


For applications which require high quality, high volume background music and paging, such as sports stadiums, race tracks and public venues. The DK-MH 30/T is IP66 rated so can be mounted outside in the open and offers 100v and Low Z 20W options.

Features:
Weather / ingress resistance (IP66 rated) Robust ABS construction Multi-tapping 100v and low impedance versions Voice & music compatible High SPL Aluminum mounting bracket RAL 7035 grey

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Dimensions Weight

DK-MH 30/T PLUS:


3.75, 7.5, 15, 30W 80Hz ~ 14kHz 105.5dB Grey RAL7035 ABS 370(W) x 255(H) x 291(D) mm 4.3kg

255mm

291mm

370mm

www.cie-group.com

14

DA10-260/T: Bi-directional Loudspeaker


Ideal for installation in corridors, concourses, transport terminals and plant rooms. Practical, vandal resistant and incorporating multi-tapping 100v transformer, the DA10 is ideal for voice messages and low level BGM reproduction.

Features:
Vandal resistant White - RAL9010 Multi-tapping 100v settings Integral mounting bracket

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Dimensions Weight

DA10-260/T:
1.5, 3, 6, 10W 150Hz ~ 14kHz 90.9dB White RAL9010 Metal 164() x 164(W) mm, Bracket 199(L) x 90(W) mm 2.2kg

199mm

164() mm 90mm 164mm

www.cie-group.com

100v Line Loudspeakers - Horns & Projectors

15

DAP20-130T: Sound Projector


The DAP20 is a general, all-purpose loudspeaker which provides excellent music reproduction and clear voice announcements. IP65-rated, it will effectively operate indoors or outdoors in transport terminals, shopping centres, retail, warehousing and many other applications.

Features:
Weather / ingress resistance (IP65 rated) Robust plastic housing Multi-tapping 100v options Voice & music capable White RAL 9010

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Dimensions Weight

DAP20-130T:
2.5, 5, 10, 20W 150Hz ~ 20kHz 99.5dB White RAL9010 ABS 140() x 195(D) mm 1.35kg

140mm

195mm

140() mm

www.cie-group.com

16

100v Line Loudspeakers - Horns & Projectors

DAS10-130T: Metal Sound Projector


More robust metal version of the DAP Series projector, providing the same features and benefits but in a metal housing for added vandal resistance.

Features:
Robust metal case Weather / ingress resistance (IP65 rated) Multi-tapping 100v options Voice & music capacity White RAL9010

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Dimensions Weight

DAS10-130T:
1.5, 3, 6, 10W 200Hz ~ 16kHz 94.1dB White RAL9010 Metal 167() x 163(D) mm 3.10kg

163mm

167() mm

www.cie-group.com

17

DL06-165T: Quick-Fit Ceiling Speaker


An all-round performer, the DL06-165T is ideal for any paging and low ambient background music reproduction in many applications such as offices, retail, waiting rooms, corridors, etc. Metal construction and high quality 100v transformer complete this installation-friendly ceiling speaker system.

Features:
Metal construction White RAL9010 Quick-fit mounting system High quality 100v transformer Full range 6 driver Optional steel backbox - F165

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Dimensions Weight

DL06-165T:
1.5, 3, 6W 100Hz ~ 16kHz 97.9dB White RAL9010 Metal 223() x 100(H) mm 1.3kg

100mm 70mm

197mm 223mm

www.cie-group.com

18

100v Line Loudspeakers - Ceiling Speakers

DL-BR15-100T PLUS / DL-BR30-165T PLUS: 15W, 30W Full Range Ceiling Speakers
The DL-BR Series provides very high quality, full range music and voice reproduction. One piece construction (backbox fixed to grille) and easy to install mounting system makes the DL-BR ideal for applications in retail, pubs, bars, night clubs, audio visual and entertainment venues. In / Out Phoenix connectors and Low Z (8W) output option, 100v Wattage is adjustable using a screwdriver switch behind the front grille.

Features:
One piece construction White RAL9010 Multi-tapping 100v transformer Full range driver

Specifications:
Model:
100v Power Tappings Frequency Response SPL@1w/1m Colour Material Dimensions Weight

DL-BR15-100T PLUS:
1.9, 3.75, 7.5, 15W 85Hz ~ 23kHz 90.9dB White RAL9010 Metal/ABS 190() x 120(D) mm 1.63kg

DL-BR30-165T PLUS:
3.75, 7.5, 15, 30W 75Hz ~ 24kHz 93.6dB White RAL9010 Metal/ABS 250() x 170(D) mm 3.58kg

DL-BR15T-100T PLUS: 120mm DL-BR30T-100T PLUS: 170mm

DL-BR15T-100T PLUS: 190mm DL-BR30T-100T PLUS: 250mm

www.cie-group.com

100v Line Loudspeakers - Ceiling Speakers

19

DL-SF06-100T: Moisture-Proof Ceiling Speaker


This IP55 approved unit is ideal for installation in damp, humid environments such as changing rooms, bathrooms or even outdoors in protected areas. One-piece construction and quick-fit spring mounting system complete a versatile package.

Features:
Water / ingress resistance (IP55 rated) One-piece construction White RAL9010 Multi-tapping 100v transformer Low impedance 8W option Quick-fit mounting system

Specifications:
Model:
100v Power Tappings Low Z Power (8W) Frequency Response SPL@1w/1m Colour Material Dimensions Weight

DL-SF06-100T:
1.5, 3, 6W 6W 150Hz ~ 20kHz 88dB White RAL9010 ABS 140() x 135(D) mm 1.0kg

135mm

120.5() mm

140mm

www.cie-group.com

20

100v Line Loudspeakers - Ceiling Speakers

CS-1000 Series / PRO Panel Series: 8W, 30W i-ceilings Sound Panel Loudspeakers
i-ceilings - a unique range of Ceiling Tile Sound Panel Loudspeakers - use state-of-the-art NXT technology to provide exceptional sound qualities, without compromising the aesthetic consistency of the ceiling plane. i-ceiling Sound Panels are designed to simply replace a standard Armstrong acoustic ceiling tile with high quality, wide dispersion loudspeakers which exactly match the rest of the suspended ceiling, effectively providing an invisible ceiling speaker solution.

Features:
Visually unidentifiable ceiling speaker solution Matches over 90% of Armstrong suspended ceilings Installed up to 75% faster than standard ceiling speakers Superior dispersion of sound Compatible with 100v line and low impedance systems (100v line / low Z selector switch) Variable wattage tap for localised volume control

Finishes:
i-ceilings Sound Panels are currently available in Armstrongs most popular ceiling tile finishes: Ultima, Optima, Dune, Fine Fissured, Orcal, Neeva and Reno. For details of non-standard, bespoke units, please call the CIE-Group sales office on +44 (0)115 9770075.

i-ceilings Sound Panels are now also available as powered versions - /AMP and /Pwrd

Ultima/Optima

Dune

Fine Fissured

Orcal

Neeva/Reno

Specifications:
Model:
Sensitivity Impedance Exciters Power Capacity Dimensions Panel Weight

CS-1000:
86.9dB @ 1W, 1m / Max 95.9dB 100v: 1, 2, 4 & 8W or 8W low impedance 1 8W 600(W) x 600(D) x 115(H) mm 4.4kg per panel

PRO Panel:
93dB @ 1W, 1m 100v: 7.5, 15, 30W or or 8W low impedance 4 30W 600(W) x 600(D) x 120(H) mm 5.5kg per panel

CS-1000: 115mm PRO Panel: 120mm CS-1000: 600 x 600 mm PRO Panel: 600 x 600 mm

www.cie-group.com

100v Line Loudspeakers - Fashion Speakers

21

MO15-100T / MO30-130T: 15W, 30W Fashion Monitor Loudspeakers


The modern rounded design of the MO Series makes it ideal for installation in contemporary, modern environments such as bars, pubs, audio visual, conference, education or retail sites and are proofed for use in outdoor or damp environments. Units are available in black or white and are supplied with a versatile multi-position mounting bracket. Wattage tappings are via a multi-way removable Phoenix-type screw terminal block on the rear.

Features:
Contemporary design Black or white options Multi-position mounting bracket High quality full-range driver Removable Phoenix connection block Multi-tapping 100v transformer Low Z 8W option Weatherproof housing/driver

Supplied with multi-position mounting bracket:

Specifications:
Model:
100v Power Tappings Low Z 8W Frequency Response SPL@1w/1m Colour Options Material Dimensions Weight

MO15-100T:
3.75, 7.5, 15W 15W 95Hz ~ 19.5kHz 86.9dB White (W) or Black (B) ABS 210(H) x 148(W) x 135(D) mm 1.9kg

MO30-130T:
2.5, 7.5, 15, 30W 30W 100Hz ~ 20kHz 89.0dB White (W) or Black (B) ABS 240(H) x 165(W) x 160(D) mm 2.6kg

MO15-100T: 210mm MO30-100T: 240mm

MO15-100T: 135mm MO30-100T: 160mm

MO15-100T: 148mm MO30-100T: 165mm

www.cie-group.com

22

100v Line Loudspeakers - VA Compliant

BS5839-compliant VA/BS-standard Models


Some of the popular models in the IC Audio range are also available with a specification suitable for use in installations compliant with the requirements of BS5839 Pt 8. All incorporate ceramic terminal block, heat sensitive fuse and heat-resistant cables. Models include:
DL06-165T / BS5839: Ceiling Loudspeaker (supplied with back box F165) DAP20-130T / BS5839: Sound Projector WA06-165T / BS5839: Wall Speaker

Specifications:
Model:
100v Power Tappings Frequency Response SPL @1w/1m Ceramic Terminal Thermal Fuse Heat Restistant Cable Colour Material Dimensions Weight

DL06-165T / BS5839:
1.5, 3, 6W 100Hz ~ 16kHz 97.9dB Yes Yes Yes White RAL9010 Metal 230() x 70(H) mm 1.3kg

DA-P20-130T / BS5839:
2.5, 5, 10, 20W 150Hz ~20kHz 99.5dB N/A Yes Yes White RAL9010 ABS 140() x 195(D) mm 1.34kg

WA06-165T / BS5839:
1.5, 3, 6W 200Hz ~ 17.4kHz 95.6dB Yes Yes Yes White RAL9010 Metal 192(H) x 257(W) x 80(D) mm 2.45kg

www.cie-group.com

100v Line Loudspeakers - Attenuators

23

TVC-25 / LVC-25 / LVC-100 / LVC-300: 100v Line Attenuators


A complete range of 100v Line Volume Controls. Models TVC-25 & LVC-25 are fitted to single gang PVC wall plates, LVC-100 is fitted to a 2 gang PVC plate. LVC-300 can be supplied in a surface mount box or fitted to a flush panel fitting. All models include multi-step, continuous rotating knobs, push-fit screw terminals with LVC Models also including a volume restoration facility.

Specifications:
Model:
100v Rating


TVC-25: LVC-25: LVC-100: LVC-300:

TVC-25 / LVC-25 / LVC-100 / LVC-300:


25W 25W 100W 300W Full Power, Power, Power, Power via Internal Jumper Additional switched 24vDC required
Single gang units: LVC-25 / TVC-25: Double gang unit: LVC-100: LVC-300:

Volume Restoration (LVC models only)

87mm

145mm

178mm

Dimensions

TVC-25: LVC-25: LVC-100: LVC-300:

87(H) x 87(W) x 38(D)* mm 87(H) x 87(W) x 38(D)* mm 145(H) x 87(W) x 38(D)* mm 178(H) x 122(W) x 84(D)* mm

38mm

87mm 38mm 87mm 84mm 122mm

* minimum depth required for backbox

www.cie-group.com

24

Installation Advice & Information


Professional 100v Line Loudspeakers
IC-Audio, Atlas Sound and Majorcom provide ranges of professional installation loudspeakers for indoor and outdoor PA applications. Designed to achieve optimum voice/BGM clarity in a wide range of commercial applications, our speakers continue to be specified into many of the UKs leading PA installations.

Ceiling-mounted loudspeakers
In environments offering a suitable ceiling construction and height, the best results can often be obtained by utilising loudspeakers mounted in the ceiling structure. Once the most suitable loudspeaker type has been chosen and its dispersion at the required mounting height ascertained, the number of units needed to obtain constant and uniform coverage and sound pressure level (SPL) can be established. Remember, when calculating the SPL it is the level at the listeners ears to be considered, not the level at the loudspeaker or floor level. The required speaker quantity is calculated by dividing the floor area to be covered by the area covered by a single loudspeaker. Note; to obtain even coverage, a suitable overlap between adjacent loudspeakers is required. [Figure 1 clearly illustrates this concept]

Wall-mounted loudspeakers
If the architectural features of the room are not compatible with ceiling-mounted loudspeakers or if a wall-mounted solution is preferred, it is essential to observe a few basic rules to obtain the most effective sound distribution. In order to maintain the most efficient listening point inside the direct signal area, both in-wall and surface mounted loudspeakers with power from 6W to 20W should be installed at a height between 2 and 2.5m. The maximum distance between adjacent loudspeakers must be no more than 5 ~ 6 metres along the length of the room, where the room is no wider than 4 ~ 5 metres. For wider rooms (eg. 8 ~ 10 metres), it is recommended to install loudspeakers in an alternate pattern along both opposite walls, to provide adequate coverage and maintain sound pressure at the best possible constant level throughout the area for coverage. [see Figures 2 and 3]

High ambient noise level environments


For effective sound distribution in locations with high levels of ambient noise, horn loudspeakers are often specified as they produce higher sound pressure levels and, therefore, increased audibility in such conditions. However, it should be noted that horn loudspeakers driven by pressure units are not usually suitable for use on systems where music is required, as the frequency response is optimised for voice reproduction. Where higher quality sound and/or music reproduction is a requirement, Sound Projectors can often be used as an alternative, though, as they generally produce a lower SPL, a larger number is likely to be required to cover the same area. In all cases these speakers should be installed at a maximum distance of 15m from one another. They should all be mounted in the same direction with care taken to ensure they are all wired in phase. [see Figure 4]

The basic principles of effective ceiling loudspeaker installation


The first priority of any sound reproduction system is providing listeners with a level of clear, intelligible sound higher than any possible background noise (at least 6dB in the case of paging systems), together with a wide frequency response and uniform sound pressure level over the area to be covered. To meet these criteria, the hypothetically ideal solution would be to place a single sound source at an equal distance from all required listening positions. As this is all but impossible to achieve in most environments, some compromises usually have to be made. The purpose of these notes is to provide some basic advice as to how this might be accomplished.

A Figure 1 Figure 2 Figure 3 Figure 4

www.cie-group.com

25

Degrees of protection (I.P rating) .


The characteristics of a product in terms of its resistance to the penetration of solid objects and liquids is indicated by the letters IP (International Protection) followed by two numbers in accordance with EN standards 60529-CEI 70-1. IP degree of protection The first number identifies the level of protection against the ingress of solid objects. Number from 0 to 6. The second number identifies the level of protection against penetration of liquids. Number from 0 to 8. First IP number: 0 Not protected 1 Protected against the ingress of solid objects larger than 50mm 2 Protected against the ingress of solid objects larger than 12mm 3 Protected against the ingress of solid objects larger than 2.5mm 4 Protected against the ingress of solid objects larger than 1mm 5 Protected against dust penetration 6 Totally dust-proof Second IP number: 0 Not protected 1 Protected against vertically dripping water 2 Protected against water dripping at an angle (up to 15 from the vertical) 3 Protected against rain 4 Protected against water spray 5 Protected against water jets 6 Protected against waves 7 Protected against the effects of temporary immersion 8 Protected against the effects of permanent immersion

Speakers, Decibels, SPL


Lose 6dB each time distance is doubled from speaker Distance from speaker: SPL(dB)@1W SPL(dB)@2W SPL(dB)@4W SPL(dB)@8W Add 3dB when power is doubled 1m 95 98 101 104 2m 89 92 95 98 3m 83 86 89 92

Audio Input Connectors


Connector:
XLR3 3 Pole 6.3mm Jack 2 Pole 6.3mm Jack RCA Phono Plug

Signal:
Pin 2 (hot) Tip (hot) Tip Pin

Return:
Pin 3 (cold) Ring (cold) Sleeve Sleeve

Screen:
Pin 1 Sleeve Sleeve Sleeve

3 Pole Jack (stereo):

XLR: 2 Pole Jack (mono):

2 3

100v Line Loudspeaker Systems


Load Impedance Ohms: Power Dissipation Watts:
1000 500 400 300 250 200 120 100 90 80

Load Impedance Ohms:


143 167 200 250 333 500 1k0 1k11 1k25 1k43

Power Dissipation Watts:


70 60 50 40 30 20 10 9 8 7

Load Impedance Ohms:


1k67 2k0 2k5 3k33 5k0 10k0 20k0 40k0 80k0

Power Dissipation Watts:


6 5 4 3 2 1 0.50 0.25 0.125

Quantity of Ceiling Speakers per Sq/metre for background music


Ceiling Height = 2.5m Floor Area: 100 sqm 250 sqm 1000 sqm Speaker Spacing = 5m Quantity of Speakers: 4 x Speakers 10 x Speakers 40 x Speakers Coverage = 25sqm Wattage Tapps in Area Quiet 55dB Tapp @1W Normal 60dB Tapp @2W Noisy 65dB Tapp @3W

10 20 25 33.3 40 50 83 100 111 125

www.cie-group.com

26
Low Impedance and 100v Line Systems
A Low Impedance system is normally only used where a small number of loudspeakers are required, to be placed only a short distance from the amplifier. The constant voltage system (ie. 100v line in the UK) offers a host of advantages on systems of all sizes particularly where long speaker cable runs are required. This connection system requires each loudspeaker to be equipped with its own line transformer which converts the low impedance of the loudspeaker to the much higher impedance of the line itself. The current flow on a line at 100v is considerably lower than that at low impedance. Consequently the voltage drop along the line is much lower which, in turn, means a smaller gauge of cable can be used. With installations operating at low impedance, the total load series and/or parallel presented to the amplifier must be greater than the minimum impedance the amplifier is rated to drive (see Figure 5). The power output of the amplifier at the selected impedance should be equal to or less than the power the load can withstand. Beware - it is possible to destroy loudspeakers if the amplifier feeding them is overdriven to the point of clipping. Where the constant voltage (100v line) system is utilised, the total load is calculated by adding the wattage setting of each loudspeaker on the system together. The resulting figure is the total wattage load that will be applied to the amplifier; it follows, therefore, that the output of the amplifier used must be greater than this figure (see Figure 6).

Some basic rules which must always be observed:


Input Signals
All microphone inputs must be wired as balanced circuits using good quality twin twisted pair microphone cable with an overall screen; input connectors must have 3 pins and the amplifier inputs configured as balanced. The same principal should also be applied to line inputs where the cable is long enough to pick up interference. Note, the signal return wire and the screen of the cable must be separate from the source to the input of the amplifier. If they are connected together at any point, or the cable used has only a single screened core, it is impossible for a circuit wired in this manner to operate as a balanced line. A line connected incorrectly is wide open to interference pickup and hum which is all but impossible to cure by any method short of re-wiring.

Low Impedance Speaker Load


Parallel
+

Series
+
8W

8W

8W

= 4W Load

+
8W

= 16W Load
8W

Series/Parallel
+
8W

+ -

Loudspeaker Networks

As the current flow in low impedance speaker circuits is much higher, it follows that larger cables will be required; the absolute minimum size required is 1mm twin with 1.5mm or even 2.5mm being a better choice for even quite short runs. With 100v Line Systems it is sometimes possible to use 0.75mm twin on small systems, though 1mm or 1.5mm is a better choice. If attenuators (volume controls) are to be used, this can alter the cable requirements please seek advice before commencing the installation. Under no circumstances use screened cable on loudspeaker networks as serious damage to power amplifiers can be caused.

+
8W (16W) 8W

+ -

(16W)

= 8W Load

Figure 5

100v Line Speaker Load


Amplifier power should be equal to or greater than the total speaker load (preferably leaving approx. 20% available power, where possible).
20W 20W 20W Greater than 60W Amplifier

Amplifier Selection
The function of an amplifier is to raise the level of sound sources such as microphones, radio tuners, CD players, etc. to a level capable of driving the loudspeaker network. Most amplifiers have several inputs to allow various sources to be mixed and prioritised to suit the requirements of specific installations. When selecting a suitable amplifier power, it is essential to allow some headroom for both future expansion and load variations a figure of 20% is desirable with typical 100v systems (see Figure 6).

Figure 6

27

Dedicated Rack Design & Build Facility


For many years, CIE-Group customers have also benefited from comprehensive Audio Rack System Design & Build Service, to provide ready to install PA, VA and AV Racks in some of the UKs largest and most successful installations.
Using our extensive portfolio of professional audio products, our highly skilled, UK-based Engineering Team have a reputation for consistently producing some of the UKs highest quality, ready-to-install PA rack systems to customers specifications. There is no set limit to the size of system we can produce; anything from a small single zone speech-only system, to a multi-zone system combining speech and music. Monitoring and battery back-up can also be accommodated by our in-house Engineering Facilities. To ensure that we build your system to your specific requirements, we have produced a technical questionnaire which, once completed by yourselves or with our assistance, outlines requirements such as number of zones, music sources, number of microphones, etc. Each system is supplied assembled, wired and fully tested before leaving our workshops. As part of the Build Package, each System is supplied with a comprehensive operations manual incorporating user instructions for each individual piece of equipment, a schematic drawing of the System, a visual of the Rack layout and easy to use connection details. Finally, each System is given a unique identification number specific to your installation which allows our Engineering Team to easily identify any system we have assembled, to efficiently assist with any after sales service requirements.

Call the CIE-Group sales desk or your area representative on 0115 9770075 for advice, free UK site surveys and a highly competitive quotation.

www.cie-group.com

T: 0115 9770075 F: 0115 9770081 E: [email protected] W: www.cie-group.com CIE-Group Widdowson Close Blenheim Industrial Estate Bulwell Nottingham NG6 8WB
This Brochure is Fully Recyclable

You might also like