D20 Base Station Repeater

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

D20 base station / repeater

CRITICAL
FEATURES
High end receiver with
sophisticated front end filtering
Base and repeater handshake
Programmable signal routing
“Daisy chain” capability

Full-featured and super intelligent

! Signal acknowledgements (handshaking) capabilities reduces


network congestion and increases signal integrity.
! Pre-programmed signal routing ensures that signals take the
Transmitter

Receiver 1

Receiver 2

Receiver 3

Receiver 4
fastest most efficient route to the base station (IPRS®).
! ”Daisy chain” capability allows signals to be sent out of
difficult terrain and over extended distances.
! High end receiver with sophisticated front end filtering for
interference immunity - particularly important for interference
prone repeater high sites. No additional cavity filters are
required.
! Each unit is able to accommodate up to 4 receivers, each on
their own frequency..
! May be used either as a base station decoder or as a repeater
to extend the range of transmitters on the network.
! One unit provides backup for both base station and repeater.
! Despite its highly advanced features, the D20 is reasonably
priced.
! Machine assembled to highest quality standards.
! Compatible with all RDC transmitter models.
! Contact ID compatible.
! Used with an external 2A charger and high capacity battery
for load shedding conditions.
! Up to 30 repeaters per network for increased coverage and
performance.
! Multi-user facility of up to 400 users.
! Pre-programmed mains-fail and self-test reporting allows for
pro-active network monitoring.
! Internal real-time clock.
! English telemetry display.
! RS-232 serial output compatible with all control room
monitoring software.
Signalling options

Base Station
Transmitter
at security
at alarm
company
installation
control room

Today's most advanced security data transmission technology

High speed MSK or IPRS® signalling options

MSK Signalling
An entry level signalling format for standard network installations. Base station and repeater data communication takes
place at high-speed with transmission times at under 100mS. The base station “hand-shake” feature reduces unnecessary
repetition of signals, thereby minimising congestion on the network.

IPRS® Signalling
“Intelligent Path Repeater Signalling”, is an advanced system intended for difficult terrain and high traffic networks. Every
signal received is acknowledged (hand-shake), halting further transmission. Signal integrity is improved and valuable
bandwidth is freed up for expansion. Signals follow pre-programmed repeater paths for the shortest and most efficient
transmissions possible.

Daisy chain feature

The “daisy chain” feature gets signals


out of areas with difficult terrain
and allows signals to be transmitted
over extended distances

TM

Contact Lee-Ann at: Tel: (+27 11) 616 7685/3351


E-mail: [email protected] - Web site: www.rdcomms.co.za Because you demand more than just technology

You might also like