TE-JinsofEco TWM-2 - Moisture Management
TE-JinsofEco TWM-2 - Moisture Management
TE-JinsofEco TWM-2 - Moisture Management
PROPERTIES:
1. Application condition
Parameters Condition Best condition
pH 3.5~9 4~5
Temperature (Exhaustion) 50~135°C 80~130°C
Temperature (Padding) 110~150°C 130~140°C
1. Exhaustion
JinsofEco TWM-2 is suitable for wide range pH, and it is best used in below pH 5,
because excellent moisture, removal of perspiration, anti-stain and washing effect
could be obtained.
A. Dyeing bath or fluorescent whitening bath.
JinsofEco TWM-2 prevents crease marks, increases softness and even
dyeing in the bath. The dosage should be added to the dyebath before other
agents, dyestuffs and the temperature rises.
2-3
B. Reduction clearing
Avoid using strong alkali that will damage JinsofEco TWM-2 on fabrics
and influence washing durability.
Procedure condition 80~85℃×20 minutes
B-1 Alkali reduction clearing
REDUCTION HCS 2~4g/l
B-2 Acidity reduction clearing
REDUCTION HSA 1~3g/l
Adjust pH=4.2 by glacial acetic acid
Note
1. JinsofEco TWM-2 has good compatibility with other dyebath auxiliaries but
avoid directly mixing with other auxiliaries. Pre -dilute and add in additional tank.
2. When padding of dyed polyester fabrics along with JinsofEco TWM-2 may lead
to lower the wash fastness grade. Lab trial recommended before bulk
production.
3-3