3 Btech Major Project - Front Pages

TITLE OF THE PROJECT
(EX: DESIGN AND ANALYSIS OF MICRO CLASS AIRCRAFT WITH MAXIMUM

LIFITING CAPACITY USING TANDEM WING)
A Major Project Report Submitted

In partial fulfillment of the requirements for the award of the degree of
Bachelor of Technology
in
Aeronautical Engineering
by
XXXXXX 17N31A2109
XXXXXX 17N31A2153
XXXXXX 18N35A2106
Under the esteemed guidance of
NAME OF THE GUIDE

(Designation)
Department of Aeronautical Engineering

Malla Reddy College of Engineering & Technology
(Autonomous Institution- UGC, Govt. of India)
(Affiliated to JNTUH, Hyderabad, Approved by AICTE, NBA &NAAC with ‘A’ Grade)
Maisammaguda, Kompally, Dhulapally, Secunderabad – 500100
website: www.mrcet.ac.in
2017-2021
Malla Reddy College of Engineering & Technology
(Autonomous Institution- UGC, Govt. of India)
(Affiliated to JNTUH, Hyderabad, Approved by AICTE, NBA &NAAC with ‘A’ Grade)
Maisammaguda, Kompally, Dhulapally, Secunderabad – 500100
website: www.mrcet.ac.in
CERTIFICATE
This is to certify that this is the bonafide record of the major project entitled “TITLE
OF THE PROJECT “ submitted by Name of the Student xxxxx (H.T.NO xxxx), of
B.Tech in the partial fulfillment of the requirements for the degree of Bachelor of
Technology in Aeronautical Engineering, Department of Aeronautical Engineering
during the year 2020-2021. The results embodied in this major project report have
not been submitted to any other university or institute for the award of any degree or
diploma.
Internal Guide Head of the Department
NAME OF THE GUIDE

(Designation)
External Examiner
(Certificate from industry)
DECLARATION
We hereby declare that the major project titled “DESIGN AND ANALYSIS OF MICRO
CLASS AIRCRAFT WITH MAXIMUM LIFITING CAPACITY USING TANDEM WING”
submitted to Malla Reddy College of Engineering and Technology (UGC Autonomous),
affiliated to Jawaharlal Nehru Technological University Hyderabad (JNTUH) for the
award of the degree of Bachelor of Technology in Aeronautical Engineering is a result
of original research carried-out in this thesis. It is further declared that the major
project report or any part thereof has not been previously submitted to any University
or Institute for the award of degree or diploma.
XXXXX - 17N31A2109
XXXXX - 17N31A2153
XXXXX - 18N35A2106
ACKNOWLEDGEMENT
We feel ourselves honored and privileged to place our warm salutation to our college
Malla Reddy College of Engineering and Technology (UGC-Autonomous), our Director
Dr. VSK Reddy and Principal Dr. S .Srinivasa Rao who gave us the opportunity to have
experience in engineering and profound technical knowledge.
We express our heartiest thanks to our Head of the Department for encouraging us in
every aspect of our project and helping us realize our full potential.
We would like to thank our internal guide (Internal Guide Name) and Project
Coordinators (Names Of Project Coordinators ex:Dr.M.Mohammed Mohaideen and
Dr.Krishna Anand) for their regular guidance and constant encouragement. We are
extremely grateful to their valuable suggestions and unflinching co-operation
throughout project work.
We would like to thank our class in charges (Names Of Class Incharges ex:Mr.
M.Yugender and L.Sushma) who in spite of being busy with their duties took time to
guide and keep us on the correct path.
We would also like to thank all the supporting staff of the Department of ANE and all
other departments who have been helpful directly or indirectly in making our project a
success.
We are extremely grateful to our parents for their blessings and prayers for the
completion of our project that gave us strength to do our project.
with regards and gratitude
XXXXX - 17N31A2109
XXXXX - 17N31A2153
XXXXX - 18N35A2106
ABSTRACT
XXXXXXXX
(Max: 500 Words)
Key Words:
LIST OF CONTENTS
Certificate from MRCET I

Certificate from industry(If any) ii
Declaration Ii
Acknowledgement iv
Abstract
List of Figures
List Of Tables
List Of Graphs
List of Abbreviations
CHAPTER 1: INTRODUCTION 1
1.1 Introduction 1
1.2 Problem statement 4
1.3 Scope of research 6
1.4 Research hypothesis 8
1.5 Objectives 10
1.6 Organization of the report 11
12
CHAPTER 2: LITERATURE REVIEW
2.1 Background 12
2.14 Summary of literature review and research gap 71
CHAPTER 3: METHODOLOGY 73
3.1 Materials 73
3.10 Summary of methodology 85
CHAPTER 4: RESULTS AND DISCUSSION 87

4.13 Summary of results and discussion 163
164
CHAPTER 5: CONCLUSION AND RECOMMENDATIONS
5.1 Conclusion 164
5.2 Recommendations 1
REFERENCES
APPENDICES(if any)
LIST OF FIGURES
Figure 1.1.--------- 120

Figure 1.2. ---------- 130
Figure 1.3. ------ XXXX
LIST OF TABLES
Table 1.1. – XXXX
Table 1.2. – XXXX

LIST OF GRAPHS
Fig – 1 –
Fig – 2 -
LIST OF ABBREVIATIONS

3 Btech Major Project - Front Pages

Uploaded by

Copyright:

Available Formats

3 Btech Major Project - Front Pages

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

3 Btech Major Project - Front Pages

Uploaded by

Copyright:

Available Formats

TITLE OF THE PROJECT

(EX: DESIGN AND ANALYSIS OF MICRO CLASS AIRCRAFT WITH MAXIMUM

A Major Project Report Submitted

Under the esteemed guidance of

NAME OF THE GUIDE

Department of Aeronautical Engineering

Internal Guide Head of the Department

NAME OF THE GUIDE

with regards and gratitude

(Max: 500 Words)

Certificate from MRCET I

CHAPTER 4: RESULTS AND DISCUSSION 87

Figure 1.1.--------- 120

Table 1.1. – XXXX

Table 1.2. – XXXX

You might also like