2004 BRO - MHL331 - e

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

MHL 331

MHL 331
LOADING MACHINE

non supported
4-pt. supported

(5.1)
5.8* (5.8*)

7.5

non supported
4-pt. supported

(5.1)
5.7* (5.7*)

(3.6)
5.5* (5.5*)

non supported
4-pt. supported

(5.0)
6.1* (6.0*)

(3.5)
5.4 (5.5*)

(2.6)
4.0 (5.2*)

4.5

non supported
4-pt. supported

(7.4)
8.0* (8.0*)

(4.8)
6.8* (6.8*)

(3.4)
5.3 (6.1*)

(2.6)
4.0 (5.4)

non supported
4-pt. supported

(6.9)
10.2* (10.2*)

(4.5)
7.2 (7.9*)

(3.3)
5.1 (6.6*)

(2.5)
3.9 (5.3)

1.5

non supported
4-pt. supported

(6.4)
10.9 (12.5*)

(4.3)
6.9 (9.0*)

(3.1)
5.0 (6.8)

(2.4)
3.8 (5.2)

non supported
4-pt. supported

(6.0)
10.4 (10.6*)

(4.1)
6.7 (9.5)

(3.0)
4.8 (6.7)

(2.4)
3.7 (5.1)

-1.5

non supported
4-pt. supported

(4.0)
6.5 (9.3)

(3.0)
4.8 (6.6)

-3

non supported
4-pt. supported

Height
in ft.

Undercarriage
stabilizers

35

non supported
4-pt. supported

30

non supported
4-pt. supported

(11,200)
12,700* (12,700*)

25

non supported
4-pt. supported

(11,200)
12,500* (12,500*)

(7,800)
12,000* (12,000*)

20

non supported
4-pt. supported

(10,900)
13,400* (13,100*)

(7,600)
11,800 (12,000*)

(5,600)
8,700 (11,400*)

15

non supported
4-pt. supported

(16,200)
17,500 (17,500*)

(10,500)
14,900* (14,900*)

(7,400)
11,600 (13,400*)

(5,600)
8,700 (11,800)

10

non supported
4-pt. supported

(15,100)
22,400* (22,400*)

(9,800)
15,800 (17,300*)

(7,200)
11,200 (14,500*)

(5,400)
8,500 (11,600)

non supported
4-pt. supported

(14,000)
23,900 (27,500*)

(9,400)
15,100 (19,800*)

(6,800)
10,900 (14,900)

(5,200)
8,300 (11,400)

non supported
4-pt. supported

(13,100)
22,800 (23,300*)

(8,900)
14,700 (20,800)

(6,500)
10,500 (14,700)

(5,200)
8,100 (11,200)

-5

non supported
4-pt. supported

(8,700)
14,200 (20,400)

(6,500)
10,500 (14,500)

-10

non supported
4-pt. supported

10.5

25

30

Required as option when machine is used for load hook


operations in compliance with EN 474-5. Protection of cab
ensured by work equipment operating range limiter.

35

9.180/361''
4.700/185''
1.250/49''
3.160/124''
3.200/126''

GRABS
0.6 m3 (0.8 yd3) cactus grabs (option) with cast central case
and enclosed swing drive, grab jaws with wear-resistant
grab liners and tips.

OPTION: REVERSABLE FAN

Transport dimensions on a flat-bed trailer

Manufacturer & type


Design
Engine output
Nominal speed
Displacement
Cooling system
Emission standards
Air filter design
Fuel tank

24 V
2 x 12 V / 100 Ah
2 uppercarriage-mounted headlamps, 1 dipperstick-mounted
working floodlight.
Generator system 11/13 kW

Option
MHL

331

Deutz-BF6M 2012 C
6-cylinder, turbocharged
99 kW (133 HP)
2,000 rpm
6.1 l (372 cb in)
Water and charge air cooling
(temperature controlled fan speed)
COM II/TIER II
Two-stage filter with safety valve.
260 l (69 US gal)

ELECTRICAL SYSTEM
Operating voltage
Batteries
Lighting

TRAVEL DRIVE
Hydrostatic drive using infinitely variable axial piston motor;
travel brake valve mounted on travel motor providing wearfree braking.

Values are valid for working diagram on page 2.


B

REMARKS
The values are stated in tons (t) or lbs. The pump pressure for
this table is 360 bar (5220 psi). The values amount to 75 %
of the static tipping load or 87 % of the hydraulic lifting force
(marked *), in accordance with ISO 10567. When the machine
is standing on solid and level ground, these values apply to
slewing operations through 360. The values in brackets apply
in the lengthwise direction of the undercarriage. The values
specified non-supported only apply when the load is hoisted

Fuchs-Bagger GmbH & Co. KG


Maschinenfabrik
Industriestrae 3
D-76669 Bad Schnborn
Germany

above the front or rear axle. The weight of the attached load
hoisting implement (grab, magnet, load hook, etc.) must be
deducted from the carrying capacity values. If the FUCHSTEREX quick-attach system is mounted on the boom, carrying capacity values are reduced by 300 kg (661lbs).
In accordance with EC guidelines, hose-rupture safety valves on the lift cylinders and an overload warning device are
required for load hook operations.

Phone: ++49 (0) 72 53 / 84-0


Fax: ++49 (0) 72 53 / 8 41 11
www.fuchs-terex.de
[email protected]

Travel speed
Turning radius

0 - 20 km/h (12 mp/h)


7.0 m (23'')

OPERATING WEIGHTS
Basic machine including work equipment
(including 0.6 m3/0.8 yd3 cactus grab and generator system)
Reach 10.5 m (34.4'')
Reach 11.0 m (36.1'')

MHL 331 valid from machine no. 583. 10.2004-GB/US (2) Printed in Germany
Subject to change without notice. The data contained in this brochure may differ from the equipment supplied as standard.

SWING SYSTEM

DIESEL ENGINE

Reversable intake direction; advantage: longer machine


operating time in dusty environments.

20

9.250/364''
4.520/178''
1.250/ 49''
3.160/124''
2.800/110''

A
B
C
D
E

Reach in ft.
15

SAFETY EQUIPMENT

TRANSPORT DIMENSIONS
Reach 11.0 m/36.1''
(with dipperstick
4.85 m/15.9'')

1350/53''
2500/98''
3670/144''
3950/155''

2500/98''
4800/189''

Certification according to CE-regulations.

Reach 10.5 m/34.4''


(with multi function stick
4.0 m/13.1'')

331

Option: Cab with bullet-proofed glas.

OFFICIAL HOMOLOGATION

Dimension
mm/in.

MHL

7.5

3160/124''

10.5

non supported
4-pt. supported

2260/89''

Reach in m
6

3-speed fan for hot water heating, 4 adjustable defroster


nozzles.
Up and over type front windshield, with pull-down sunblind;
lift-up skylight on cab roof.
Air conditioning as standard.

2550/100''

1250/49''

Undercarriage
stabilizers

Hydraulically height-adjustable cab with max. eye level of


5.1 m (16.7''), human-engineered, functional design and
excellent all-round visibility.
Air-cushioned comfort seat with pneumatically adjustable
lumbar support, safety belt and headrest; seat heating
available on request.
The seat meets EC-safety and health requirements (Directive
89/392/EEC, Paragraph 3.2.2).
Seat position, seat inclination and seat cushion multi-adjustable in line with position of armrests and pilot control units,
allowing fatigue-free operations.

395

Height
in m

10

2500/98''

1000/39''

MHL 331 (reach 10.5 m/34.4'').


Work equipment: box-type boom 6.0 m/19.7'', multi function stick 4.0 m/13.1''.
4.5

LOADING MACHINE

CAB

LIFTING CAPACITY

MHL 331

22,500 kg (49,600 lbs)


22,500 kg (49,600 lbs)

Ring gear
Drive

Internally toothed ring gear.


Multi-stage planetary gear with
integrated multi-disc brake.
Uppercarriage swing speed 0 - 7 rpm

UNDERCARRIAGE
Front axle: Rigidly mounted steering axle for safe transport
of loads, max. steering angle 30.
Rear axle: Oscillating axle in planetary gear design with
multi-disc brake and oscillating axle lock.
Stabilizers
Tires

4-point stabilizers
Solid rubber, elastic tires 8-fold 9.00 - 20

BRAKES
Service brake
Parking brake

Hydraulically controlled braking system


acting on all four whell pairs.
Hydraul. controlled single-circuit. braking
system acting on the 2-speed transmission.

HYDRAULIC SYSTEM
Dual-circuit hydraulic system with load-sensing control
for optimal use of the available engine output. Separate oil
cooler with large cooling surface, temperature controlled
revolutions of fan. Hydraulic oil filter: Filter element incorporated in oil tank. Central greasing system as standard.
Option: Computer controlled management system.
Max. pump capacity
Max. operarting pressure
Max. pump capacity (swing circuit)
Max. operarting pressure
Hydraulic oil tank

320 l/min. (at 2,000 rpm)


(84 US gal/min)
360 bar (5220 psi)
95 l/min. (26 US gal/min)
235 bar (3400 psi)
300 l (79 US gal)

MHL 331

MHL 331

WORKING DIAGRAM

WORKING DIAGRAM

Undercarriage
stabilizers

10.5

non supported
4-pt. supported

(4.9)
5.7* (5.7*)

non supported
4-pt. supported

(5.1)
5.8* (5.8*)

(3.5)
5.4 (5.5*)

7.5

non supported
4-pt. supported

(5.1)
5.7* (5.7*)

(3.6)
5.5* (5.5*)

(2.6)
4.1 (4.9*)

non supported
4-pt. supported

(5.0)
6.1* (6.0*)

(3.5)
5.4 (5.5*)

(2.6)
4.0 (5.2*)

4.5

non supported
4-pt. supported

(7.4)
8.0* (8.0*)

(4.8)
6.8* (6.8*)

(3.4)
5.3 (6.1*)

(2.6)
4.0 (5.4)

(2.0)
3.1 (4.2)

non supported
4-pt. supported

(6.9)
10.2* (10.2*)

(4.5)
7.2 (7.9*)

(3.3)
5.1 (6.6*)

(2.5)
3.9 (5.3)

(2.0)
3.1 (4.2)

1.5

non supported
4-pt. supported

(6.4)
10.9 (12.5*)

(4.3)
6.9 (9.0*)

(3.1)
5.0 (6.8)

(2.4)
3.8 (5.2)

(1.9)
3.1 (4.1)

non supported
4-pt. supported

(6.0)
10.4 (10.6*)

(4.1)
6.7 (9.5)

(3.0)
4.8 (6.7)

(2.4)
3.7 (5.1)

(1.9)
3.0 (4.1)

-1.5

non supported
4-pt. supported

(5.8)
9.0* (9.0*)

(4.0)
6.5 (9.3)

(3.0)
4.8 (6.6)

(2.3)
3.7 (5.1)

-3

non supported
4-pt. supported

Height
in ft.

Undercarriage
stabilizers

15

20

25

30

35

non supported
4-pt. supported

(10,700)
12,500* (12,500*)

30

non supported
4-pt. supported

(11,200)
12,700* (12,700*)

(7,600)
11,800 (12,000*)

25

non supported
4-pt. supported

(11,200)
12,500* (12,500*)

(7,800)
12,000* (12,000*)

(5,600)
8,900 (10,700*)

20

non supported
4-pt. supported

(10,900)
13,400* (13,100*)

(7,600)
11,800 (12,000*)

(5,600)
8,700 (11,400*)

15

non supported
4-pt. supported

(16,200)
17,500 (17,500*)

(10,500)
14,900* (14,900*)

(7,400)
11,600 (13,400*)

(5,600)
8,700 (11,800)

(4,300)
6,700 (9,200)

10

non supported
4-pt. supported

(15,100)
22,400* (22,400*)

(9,800)
15,800 (17,300*)

(7,200)
11,200 (14,500*)

(5,400)
8,500 (11,600)

(4,300)
6,700 (9,200)

-1

non supported
4-pt. supported

(14,000)
23,900 (27,500*)

(9,400)
15,100 (19,800*)

(6,800)
10,900 (14,900)

(5,200)
8,300 (11,400)

(4,100)
6,700 (8,900)

-2

non supported
4-pt. supported

(13,100)
22,800 (23,300*)

(8,900)
14,700 (20,800)

(6,500)
10,500 (14,700)

(5,200)
8,100 (11,200)

(4,100)
6,700 (8,900)

-5

non supported
4-pt. supported

(12,700)
19,800* (19,800*)

(8,700)
14,200 (20,400)

(6,500)
10,500 (14,500)

(5,000)
8,100 (11,200)

-10

non supported
4-pt. supported

13

40' 12

40' 12

11

11

10

10
30' 9

20' 6

20' 6
5

10' 3
2
MHL

331

-1
-2

Center of rotation

-10' -3
-4
-5
-20' -6
13

12
40'

11

10

9
30'

6
20'

3
10'

Horizontal reach in m and ft.

Vertical depth in m and ft.

4
10' 3
2
MHL

331

-10' -3
Center of rotation

Vertical height in m and ft.

5
Vertical height in m and ft.

MHL 331 (reach 11.0 m/36.1'').


Work equipment: box-type boom 6.0 m/19.7'', dipperstick 4.85 m/15.9''.
Height
in m

13

30' 9

Vertical depth in m and ft.

LIFTING CAPACITY

MHL 331 (reach 11.0 m/36.1'').


Work equipment: box-type boom 6.0 m/19.7'', dipperstick 4.85 m/15.9''.

MHL 331 (reach 10.5 m/34.4'').


Work equipment: box-type boom 6.0 m/19.7'', multi function stick 4.0 m/13.1''.

MHL 331

-4
-5
-20' -6
13

12
40'

11

10

9
30'

6
20'

3
10'

Reach in m
3

4.5

(13.1)
15.7* (15.7*)

7.5

10.5

Reach in ft.
10

(28,800)
34,500* (34,500*)

35

Values are valid for working diagram on page 3.

REMARKS
The values are stated in tons (t) or lbs. The pump pressure for
this table is 360 bar (5220 psi). The values amount to 75 %
of the static tipping load or 87 % of the hydraulic lifting force
(marked *), in accordance with ISO 10567. When the machine
is standing on solid and level ground, these values apply to
slewing operations through 360. The values in brackets apply
in the lengthwise direction of the undercarriage. The values
specified non-supported only apply when the load is hoisted

Horizontal reach in m and ft.

above the front or rear axle. The weight of the attached load
hoisting implement (grab, magnet, load hook, etc.) must be
deducted from the carrying capacity values. If the FUCHSTEREX quick-attach system is mounted on the boom, carrying capacity values are reduced by 300 kg (661lbs).
In accordance with EC guidelines, hose-rupture safety valves on the lift cylinders and an overload warning device are
required for load hook operations.

You might also like