Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    FK1828

    Uploaded by

    dignityymart

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    FK1828

    Uploaded by

    dignityymart
    23 views3 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    23 views3 pages

    FK1828

    Uploaded by

    dignityymart

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    PRODUCT DATA SHEET

    POLYETHYLENE
    ANTEO™ FK1828
    BORSTAR® BIMODAL TERPOLYMER LLDPE FOR HIGH PERFORMANCE FLEXIBLE PACKAGING

    DESCRIPTION
    Anteo™ FK1828 is produced using the proprietary Borstar® bimodal terpolymer technology combining
    outstanding sealing performance with easy processabilty, good optics and superior mechanical properties.
    Film made with Anteo™ FK1828 exhibits unique combination of low seal initiation temperature (SIT), high hot
    tack force and excellent puncture and tear properties. Anteo™ FK1828 used in combination with Borstar® PE /
    BorShape™ PE / LDPE / PP products offers best in class high performance transparent flexible packaging
    solution with potential for down gauging.

    Anteo™ FK1828 contains Slip, Antiblock, Antioxidant and processing Aid (PPA).

    APPLICATIONS
    Lamination Stretch Hood Food Packaging
    Liquid Packaging Frozen Food Packaging Stand up Pouches
    Agriculture Film Lamitube Shrink Film
    Multilayer Packaging Film Stretch Hood Impact modifier

    KEY FEATURES
    Easy process ability
    Excellent Mechanical Strength
    Excellent Low Temperature Performance
    Superior Puncture Resistance
    Excellent Organoleptic Properties
    Balanced Tear Strength
    Good Optics
    Low COF
    Outstanding Seal Performance (low SIT, High Hot Tack Force and wide sealing Window)

    PHYSICAL PROPERTIES
    Property Typical Value* Test Method
    Density 918 kg/m3 ASTM D 792
    Melt Flow Rate (190°C/2.16kg) 1.5 g/10min ASTM D1238
    Melting Temperature 122 °C ISO 11357/03
    Vicat Softening Point 102 °C ASTM D 1525

    * Typical properties and data should not be used for specification work
    FILM PROPERTIES
    Anteo™ FK1828 film properties are measured on 40 micron blown film produced on a lab scale extruder
    with processing conditions: BUR = 2.5:1, FLH = 3 DD, Die gap =1.8mm

    Property** Typical Value* Test Method


    Tensile Strength at Break (MD/TD) 52/50 MPa ISO 527-3
    Elongation at Break (MD/TD) 650/700 % ISO 527-3
    Tensile Strength at Yield (TD) 11 MPa ISO 527-3
    Tensile Modulus (MD/TD) 210/220 MPa ISO 527-3
    Tensile Modulus (1 % Secant) (MD/TD) 190/200 MPa ASTM D 882
    Elmendorf tear strength (MD/TD) 550/700 g ASTM D 1922
    Dart Drop >1000 g ASTM D 1709/A
    Coefficient of Friction (Dynamic) ≤ 0.20 ASTM D 1894
    Haze** 8% ASTM1003
    Gloss (45°)** 60 ASTM D 2457

    * Typical properties and data should not be used for specification work
    ** Blend with 10% LDPE.

    PROCESSING CONDITIONS
    Anteo™ FK1828 can be processed in most types of blown film equipment such as LDPE, LLDPE or HDPE
    extruders.
    Anteo™ FK1828 is well suited for co-extrusion in combination with Borstar® PE/ BorShape™ PE / LDPE / PP
    products.
    Recommended extrusion temperature is 180 - 210°C. Die gap of 1.4 - 2.2 mm will give the best balance between
    extruder pressure and physical properties in the film. Anteo™ FK1828 enables energy saving by processing at
    lower temperature and motor load with excellent bubble stability.

    To boost optical properties of film made with Anteo™FK1828, it is recommended to blend with minimum 5%
    LDPE.

    FOOD CONTACT REGULATIONS


    Anteo™FK1828 fulfils the food contact regulations in most countries. If required, contact your Borouge
    representative for a certificate.

    STORAGE
    This product should be stored in dry conditions at temperature bellow 50°C and protected from UV-light.
    Improper storage can initiate degradation, which results in odour generation and colour changes and can
    have negative effects on physical properties of this product.
    More information on storage can be found in Safety Information Sheet (SIS) for this product.

    SAFETY
    The product is not classified as a hazardous mixture.

    Dust and fines from the product carry a risk of dust explosion. All equipment should be properly earthed. Inhalation
    of dust should be avoided as it may cause irritation of the respiratory system. Small amounts of fumes are
    generated during processing of the product. Proper ventilation is therefore required.

    Please see our Safety Information Sheet (SIS) for details on various aspects of safety, recovery and disposal
    of the product, for more information contact your Borouge representative.

    RECYCLING

    The product is suitable for recycling using modern methods of shredding and cleaning. In-house production
    waste should be kept clean to facilitate direct recycling.

    RELATED DOCUMENTS

    The following related documents are available on request, and represent various aspects on the usability,
    safety, recovery and disposal of the product.

    Safety Information Sheet


    Statement on chemicals, regulations and standards
    Statement on compliance to regulations for drinking water pipes

    DISCLAIMER

    To the best of our knowledge, the information contained herein is accurate and reliable as of the date of publication, however, we do not
    assume any liability whatsoever for the accuracy and completeness of such information.

    Borouge makes no warranties which extend beyond the description contained herein. Nothing herein shall constitute any warranty
    of merchantability or fitness for a particular purpose.

    It is the customer’s responsibility to inspect and test our products in order to satisfy itself as to the suitability of the products for
    the customer’s particular purpose. The customer is responsible for the appropriate, safe and legal use, processing and handling of
    our products.

    No liability can be accepted in respect of the use of Borouge’s products in conjunction with other materials. The information contained herein
    relates exclusively to our products when not used in conjunction with any third party materials.

    Borstar® is a trademark of the Borealis group.


    AnteoTM is a trademark of the Borealis group.

    Jan 2018

    You might also like