XT3377FA

Ultra-high Voltage Linear LED Driver

FEATURES DESCRIPTION
Excellent line regulation XT3377FA is an ultra-high-voltage 3-string linear
Input constant power constant-power LED driver with a maximum input
± 5% output current accuracy voltage of 700V, which is suitable for driving
Multiple ICs can be used in parallel to meet high-voltage low-current LED loads. The application

l
large current output solution has very few external components and

tia
High power factor and ultra-low THD compact layout, and can be easily and flexibly
Very few external components applied to various small-size or flat LED products.

en
Over temperature protection function XT3377FA greatly improved the power factor and
ESOP8 package THD of the system (meeting the IEC61000-3-2
standard). At the same time, the simple linear drive
f id
APPLICATIONS method does not require magnetic components,
which can effectively avoid the problem of EMI.
LED Bulb Light
on

LED Flood Light

In order to prevent the IC from overheating, the
Other LED Lights XT3377FA integrates temperature control function.
When temperature inside chip exceeds TOTP,
C

XT3377FA deceases LED current, which can help

chip cooling.
TYPICAL APPLICATION
on
xt
N

XT3377FA

V01 1
XT3377FA

XT3377FA

ORDER INFORMATION

DEVICE PACKAGE TOP MARKING ENVIORNMENTAL

XT3377FA ESOP8 XT3377FA | YW□□□□□ Green

Notes
Week code
XT #TR Year code

1) Tape and Reel (If TR is not shown, it means Tube)

Package Code
Part No. : XT3377FA
XT
Lot number
2) Line1: Product code Line2:
Week code
Nxton
Year code

3) All Nxton products are packed with Pb-free and Halogen-free materials and compliant to RoHS Standards.

V01 2
XT3377FA
PIN CONFIGURATION

TOP VIEW

XT3377FA
xxxxxx

l
tia
en
ESOP8
f id
PIN DESCRIPTION
on

Pin ESOP8 Name Description

1 D2 DRAIN of the Channel 2(CH2)
C

2 RS Current sensing pin

3 GND Chip ground
on

4 COMP Constant power adjustment

xt

5 D3 DRAIN of the Channel 3(CH3)

6 NC Not Connected
N

7 D2 DRAIN of the Channel 2(CH2)

8 D1 DRAIN of the Channel 1(CH1)
E-PAD NC Not Connected

V01 3
XT3377FA

BLOCK DIAGRAM

V01 4
XT3377FA

ABSOLUTE MAXIMUM RATING

D1 D2 -0.3V to +700V
D3 -0.3V to +650V
COMP -0.3V to +5.5V
RS -0.3V to +5.5V
Junc�on Temperature -400C to +1500C

l
tia
Storage Temperature -400C to +1500C

D1 D2
RECOMMENDED OPERATING CONDITIONS
-0.3V to +630V en
f id
D3 -0.3V to +600V
Junc�on Temperature (TJ) -400C to 1250C
on

THERMAL PERFORMANCE θJA θJC

C

ESOP8 50 100C/W
Notes:
on

1) Exceeding these ratings may damage the device. These stress ratings do not imply function
operation of the device at any other conditions beyond those indicated under RECOMMENDE
xt

OPERATING CONDITIONS.
N

2) The XT3377FA includes thermal protection that is intended to protect the device in overload
conditions. Continuous operation over the specified absolute maximum operating junction
temperature may damage the device.

3) The device is not guaranteed to function outside of its operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

V01 5
 XT3377FA

ELECTRICAL CHARATERISTICS

Ta= 250C , unless otherwise stated

Advance Information, not production data, subject to change without notice.

Item Symbol Condition Min. Typ. Max. Unit.
Power Supply
Quiescent Current IQ VD1=VD3=100V, COMP =100nF 190 250 μA

Reference
RS Voltage_1 VRS1 VD1=VD3=100V,COMP =100nF 466 491 516 mV

l
RS Voltage_2 VRS2 VD1=VD3=100V,COMP =100nF 323 341 360 mV

tia
RS Voltage_3 VRS3 VD1=VD3=100V, COMP to GND 414 437 460 mV
RS Voltage_4 VRS4 VD1=VD3=200V, COMP to GND 631 665 699 mV
Protections
OTP Point TOTP en 135 145 155 ℃
10℃
f id
OTP Slope_1 KT_1 COMP=100nF -35%
OTP Slope_2 KT_2 COMP to GND -20% 10℃

D1 Over Voltage Protection D1_ovp COMP=100nF 330 360 390 V

on

Power MOSFET
BV of D1 VBV_1 Id=250uA 700 V
C

BV of D2 VBV_2 Id=250uA 700 V

BV of D3 VBV_3 Id=250uA 650 V
on

Saturation Current of D1 ISAT_1 VG=5V,Vout1=20V 58 mA

Saturation Current of D2 ISAT_2 VG=5V,Vout2=20V 98 mA
Saturation Current of D3 ISAT_3 VG=5V,Vout2=20V 128 mA
xt
N

V01 6
XT3377FA

FUNCTIONAL DESCRIPTION
XT3377FA is an ultra-high-voltage 3-string linear LED
driver for direct line operation.

Theory of Operation
The input is the rectified voltage from AC
mains by bridge rectifier. When VIN is higher than the
forward voltage of the 1st LED string, XT3377FA can
detect it and turn on the 1st MOSFET to lighten the 1st LED Current Control

l
tia
LED string. When VIN keeps increasing
and exceeds the total forward voltage of the 1st XT3377FA adopts a mathematical calculation

and 2nd LED strings, XT3377FA turns on the 2nd MOSFET method for the LED current control. The input

to lighten the 1st and 2nd LED strings. In the same way,
all LED strings are lightened as VIN increases.
en
constant power can be set by COMP pin. Different
constant power modes are realized by whether the
COMP pin is grounded or not. When a capacitor
f id
During the VIN decrease, XT3377FA shuts down the about 100nF is connected to the COMP, the

MOSFET as the reverse sequence. reference voltage can be calculated as:

on
C
on
xt
N

Sine Wave Current Control

The IC introduces BUS voltage into the linear IC
to modulate the output LED current waveform, Where
so that the input current has a sinusoidal VREFn(θ) is the reference voltage;
waveform to achieve high PF value and VD1(θ) is Drain voltage of the Channel 1.
ultra-low THD, which can meet the IEC6100-3-2 When COMP short to GND pin, can be
harmonic standard. The VIN voltage waveform calculated as:
and current waveform are shown below. VREF1（θ）

V01 7
XT3377FA

The instantaneous current of LED is calculated

as follows:

Where
ILED(θ) is the instantaneous current;
VREFn(θ) is the reference voltage;

l
RCS is the current sensing resistor connected

tia
between RS pin and GND pin.

en
Over Temperature Protection
XT3377FA incorporates a thermal protection
f id
mechanism. When the internal junction tempera-
ture is higher than TOTP, the internal reference
voltage decreases by KT, and the output current
on

decreases.
C
on
xt
N

V01 8
XT3377FA

REFERENCE DESIGN
Note: Information in the following reference design sections is not part of NXTON component
specification. Customers are responsible for determining suitability of components chosen for their
purposes and should validate their design implementation to make sure the proper system functionality.

Reference 1: Indian Bulb

VIN: 100V~300V

VOUT: 18V*15PCS, LED Voltage Ratio: 6:5:4

l
tia
ILED: ~38mA

en
f id
XT3377FA
on
C
on
xt
N

V01 9
XT3377FA

REFERENCE 2 : FLOOD LIGHT

VIN: 200V~270V

VOUT: 18V*14PCS, LED Voltage Ratio: 5:5:4

l
tia
XT3377FA XT3377FA

enXT3377FA XT3377FA
f id
on
C
on
xt
N

V01 10
XT3377FA

PACKAGE OUTLINE

l
tia
en
f id
on
C
on
xt
N

V01 11
XT3377FA

REFERENCE DESIGN

Nxton reserves the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein.

Any unauthorized redistribution or copy of this document for any purpose is strictly forbidden.

Nxton does not warrant or accept any liability whatsoever in respect of any
products purchased through unauthorized sales channel.

l
tia
NXTON PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES
(INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, SAFETY INFORMATION
AND OTHER RESOURCES, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING

en
WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
f id
on
C
on
xt
N

V01 12