Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    Output - ITEM NO. 113486 - 24 Inch at 10000 KGHR

    Uploaded by

    yadav yadav
    This document provides specifications for an exhaust cooler heat exchanger including performance details, construction details, and materials of construction. It specifies temperatures, pressures, flow rates, heat transfer rates, and other key parameters for the shell and tube exchanger that is designed to cool an exhaust stream.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Output - ITEM NO. 113486 - 24 Inch at 10000 KGHR

    Uploaded by

    yadav yadav
    10 views1 page
    This document provides specifications for an exhaust cooler heat exchanger including performance details, construction details, and materials of construction. It specifies temperatures, pressures, flow rates, heat transfer rates, and other key parameters for the shell and tube exchanger that is designed to cool an exhaust stream.

    Original Title

    Output_ITEM NO. 113486_24 inch at 10000 Kghr

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for an exhaust cooler heat exchanger including performance details, construction details, and materials of construction. It specifies temperatures, pressures, flow rates, heat transfer rates, and other key parameters for the shell and tube exchanger that is designed to cool an exhaust stream.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    10 views1 page

    Output - ITEM NO. 113486 - 24 Inch at 10000 KGHR

    Uploaded by

    yadav yadav
    This document provides specifications for an exhaust cooler heat exchanger including performance details, construction details, and materials of construction. It specifies temperatures, pressures, flow rates, heat transfer rates, and other key parameters for the shell and tube exchanger that is designed to cool an exhaust stream.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Aspen Exchanger Design and Rating Shell & Tube V14

    File: C:\Users\OTS-SYSTEM-LAP-017\Desktop\..\..\ITEM NO. 113486.EDR Printed: 30-01-2024 at 09:13:51

    TEMA Sheet

    Heat Exchanger Specification Sheet


    1 Company: Daphne
    2 Location: USA
    3 Service of Unit: Exhaust Cooler Our Reference:
    4 Item No.: 113486 Your Reference:
    5 Date: Rev No.: 0 Job No.:
    6 Size : 23 - 192 in Type: AEL Horizontal Connected in: 1 parallel 1 series
    7 Surf/unit(eff.) 1379.3 ft² Shells/unit 1 Surf/shell(eff.) 1379.3 ft²
    8 PERFORMANCE OF ONE UNIT
    9 Fluid allocation Shell Side Tube Side
    10 Fluid name Hot Fluid Water
    11 Fluid quantity, Total lb/h 22046.2 215296.5
    12 Vapor (In/Out) lb/h 22046.2 22046.2 0 0
    13 Liquid lb/h 0 0 215296.5 215296.5
    14 Noncondensable lb/h 0 0 0 0
    15
    16 Temperature (In/Out) °F 859.82 428 42.8 53.6
    17 Bubble / Dew point °F / / / /
    18 Density Vapor/Liquid lb/ft³ 0.032 / 0.021 / / 63.769 / 63.492
    19 Viscosity cp 0.0367 / 0.0276 / / 1.4573 / 1.2301
    20 Molecular wt, Vap 31.18 31.18
    21 Molecular wt, NC
    22 Specific heat BTU/(lb-F) 0.2594 / 0.2438 / / 1.032 / 1.0311
    23 Thermal conductivity BTU/(ft-h-F) 0.031 / 0.022 / / 0.335 / 0.341
    24 Latent heat BTU/lb
    25 Pressure (abs) psi 14.7 6.35 24.85 20.37
    26 Velocity (Mean/Max) ft/s 305.12 / 443.89 4.03 / 4.46
    27 Pressure drop, allow./calc. psi 2 28.61 2 4.48
    28 Fouling resistance (min) ft²-h-F/BTU 0.003 0.003 0.0036 Ao based
    29 Heat exchanged 2397271 BTU/h MTD (corrected) 571.07 °F
    30 Transfer rate, Service 3.04 Dirty 36.02 Clean 47.33 BTU/(h-ft²-F)
    31 CONSTRUCTION OF ONE SHELL Sketch
    32 Shell Side Tube Side
    33 Design/Vacuum/test pressure:g psi 120 / / 150 / /
    34 Design temperature / MDMT °F 399 / 399 / T1 S2

    35 Number passes per shell 1 4


    36 Corrosion allowance in 0.125 0 T2 S1

    37 Connections In in 1 6 / 150 ANSI 1 6 / 150 ANSI


    38 Size/Rating Out 1 6 / 150 ANSI 1 6 / 150 ANSI
    39 Nominal Intermediate / 150 ANSI / 150 ANSI
    40 Tube #: 446 OD: 0.75 Tks. Average 0.065 in Length: 192 in Pitch: 0.9375 in Tube pattern:30
    41 Tube type: Plain Insert:None Fin#: #/in Material:SB-729 N08020 Ann.
    42 Shell Carbon Steel ID 23.25 OD 24 in Shell cover -
    43 Channel or bonnet SB-463 N08020 Ann. Channel cover SB-463 N08020 Ann.
    44 Tubesheet-stationary SB-463 N08020 Ann. - Tubesheet-floating -
    45 Floating head cover - Impingement protection None
    46 Baffle-cross SA-36 K02600 Type Single segmental Cut(%d) 27.32 Horizontal
    Spacing: c/c 16 in
    47 Baffle-long - Seal Type Inlet 24.625 in
    48 Supports-tube U-bend 0 Type
    49 Bypass seal Tube-tubesheet joint Expanded only (2 grooves)(App.A 'i')
    50 Expansion joint - Type None
    51 RhoV2-Inlet nozzle 28799 Bundle entrance 3830 Bundle exit 12086 lb/(ft-s²)
    52 Gaskets - Shell side - Tube side Flat Metal Jacket Fibe
    53 Floating head -
    54 Code requirements ASME Code Sec VIII Div 1 TEMA class R - refinery service
    55 Weight/Shell 6973.6 Filled with water 9894.7 Bundle 3989.8 lb
    56 Remarks
    57
    58

    You might also like