Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    SWP Brush Cutter Line Trimmer Petrol Operated AS505

    Uploaded by

    aswinbatubara97
    This document provides a safe work procedure for operating a brush cutter or line trimmer that is petrol powered. It outlines pre-operational safety checks, operational safety checks, potential hazards and injuries, and dos and don'ts for use.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    SWP Brush Cutter Line Trimmer Petrol Operated AS505

    Uploaded by

    aswinbatubara97
    13 views2 pages
    This document provides a safe work procedure for operating a brush cutter or line trimmer that is petrol powered. It outlines pre-operational safety checks, operational safety checks, potential hazards and injuries, and dos and don'ts for use.

    Original Description:

    Cutting grass

    Original Title

    SWP_Brush_Cutter_Line_Trimmer_Petrol_Operated_AS505

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a safe work procedure for operating a brush cutter or line trimmer that is petrol powered. It outlines pre-operational safety checks, operational safety checks, potential hazards and injuries, and dos and don'ts for use.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    13 views2 pages

    SWP Brush Cutter Line Trimmer Petrol Operated AS505

    Uploaded by

    aswinbatubara97
    This document provides a safe work procedure for operating a brush cutter or line trimmer that is petrol powered. It outlines pre-operational safety checks, operational safety checks, potential hazards and injuries, and dos and don'ts for use.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    (Your Business Name Here) – Safe Work Procedure

    BRUSH CUTTER/LINE TRIMMER - PETROL OPERATED


    DO NOT use this machine unless you have been instructed
    in its safe use and operation and have been given permission

    PERSONAL PROTECTIVE EQUIPMENT

    PRE-OPERATIONAL SAFETY CHECKS


     Maintain a straight wrist position Avoid using your
     Locate and ensure you are familiar with all wrist in a bent, extended or twisted position.
    machine operations and controls.
     Always keep both hands on the control handles.
     Check for loose/missing nuts, bolts and screws. Do not operate one-handed.
    Tighten and/or replace as needed.
     Keep machine clear of fences, wires, posts and
     Inspect fuel lines, tank and area around rocks to prevent kick out and cutter head damage.
    carburetor for fuel leaks. Do not operate if leaks
    are found.
     Shut down immediately if the unit starts to shake
    or vibrate.
     Ensure all guards are fitted, secure and functional.  Disconnect spark plug wire before you work on
    Do not operate if guards are missing or faulty.
    the unit or leave it unattended.
     Ensure the blade unit has a debris shield, either a  Take care when refuelling to avoid spilling fuel on
    bar handle or a U-handle, and is suspended from
    a shoulder harness. hot motor or exhaust.

     Select the correct cutting tool for the task. Refer to ENDING OPERATIONS AND CLEANING
    manufacturer’s recommendations. UP
     Load the nylon line cutting head only with nylon  After shutting down the engine, keep fingers/feet
    trimmer line of the proper diameter.
    away from the cutting line/blade until all rotation
     Thoroughly inspect blades for damage and stops.
    cracks.  Remove any foreign material from in and around
     When operating the unit with a blade, ensure the engine, cutting tool and guards.
    blade is attached to the unit as designed (for
    example, with a locknut and cotter pin) and with
     Keep the work area and implement shed in a safe,
    clean and tidy condition.
    the teeth pointing in the direction the blade head
    rotates.
    POTENTIAL HAZARDS AND INJURIES
    OPERATIONAL SAFETY CHECKS  The blade can push, pull or kick out.
     Watch for ejected material. Ensure no person or  Noise.
    animal is endangered when operating equipment.  Ejected materials.
     Adjust the handle/s to a position for comfort and  Hair/clothing getting caught in moving machine
    balance. parts.

     When starting, ensure the machine is in a clear DON’T


    area so the line or blade cannot contact the
    ground or any other obstruction.  Do not use faulty equipment. Report suspect
     Make sure the muffler side of the engine is away machinery immediately.
    from your body to avoid burns.  Do not operate if the line cutter is missing.
     Maintain a proper balance and secure footing. Do  Do not raise the line or blade head above knee
    not work on slippery, uneven or unstable surfaces. height.
    This SWP does not necessarily cover all possible
    hazards associated with this equipment and should be
    used in conjunction with other references. It is designed
    as a guide to be used to compliment training and as a
    reminder to users prior to equipment use.

    This information is based on material published by the


    South Australian Department of Education and
    Children’s Services.

    You might also like