Unclassified

ATAK
Software User Manual
Version: 5.1
20 March 2024

1
Unclassified
Contents
ATAK Overview ....................................................................................................... 6
Compass Interactions .......................................................................................................... 7
Compass Interactions (Continued) ................................................................................. 8
Compass Interactions (Continued) ................................................................................. 9
Placement ................................................................................................................ 10
Self-Marker .............................................................................................................................. 10
Point Dropper ......................................................................................................................... 11
Point Dropper (Continued) ................................................................................................ 12
Radial Menus........................................................................................................................... 13
Range Tools ............................................................................................................. 14
Range & Bearing Line........................................................................................................... 14
Range & Bearing Line (Continued).................................................................................. 15
Range & Bearing Circle Tool............................................................................................... 16
Bullseye Tool............................................................................................................................ 16
Route Planning and Navigation ....................................................................... 17
Routes........................................................................................................................................ 17
Routes (Continued)............................................................................................................... 18
Routes (Continued)............................................................................................................... 19
Red X Tool................................................................................................................. 20
Bloodhound ............................................................................................................ 21
Route Mode ............................................................................................................................. 21
Route Mode (Continued) .................................................................................................... 22
Navigation Mode with Route Mode ............................................................................... 22
Multiple Bloodhounds......................................................................................................... 22
CASEVAC ................................................................................................................... 23
Maps & Favorites.................................................................................................... 24
Saving a Map Layer ............................................................................................................... 24
Saving a Map Layer (Continued) ...................................................................................... 25
2
Unclassified

Bookmarking a Location..................................................................................................... 25
WFS Support (Web Feature Service) .............................................................................. 25
Overlay Manager ................................................................................................... 26
Overlay Manager (Continued) .......................................................................... 27
Common Operating Picture (COP) Refresh .................................................................. 28
Hashtags and Sticky Tags ................................................................................................... 28
Multi-Select Export & Delete ............................................................................................. 29
Elevation Data ........................................................................................................................ 29
File Editing .............................................................................................................................. 30
Map Controls........................................................................................................................... 30
3D Models - Metadata ......................................................................................................... 30
Other Overlays ....................................................................................................................... 30
Other Overlays (Continued) .............................................................................................. 31
Radio Controls ........................................................................................................ 32
PRC-152 Connection ............................................................................................................ 32
Rover Controls ........................................................................................................................ 33
Data Package Tool ................................................................................................. 34
Data Package Tool (Continued) ........................................................................................ 35
Contacts .................................................................................................................... 36
Contacts (Continued) ........................................................................................... 37
GeoChat Group Management .......................................................................................... 37
GeoChat Messaging ............................................................................................................. 38
GeoChat Messaging (Continued) ................................................................................... 39
Chat ............................................................................................................................ 39
Encrypted Mesh Communications.................................................................. 40
Video Player ............................................................................................................. 41
Adding a Video Stream........................................................................................................ 42

3
Unclassified

Downloading a Video Stream ........................................................................................... 42

Search for Video ..................................................................................................................... 42
Individual Video Options .................................................................................................... 43
Viewing KLV ............................................................................................................................ 43
Live Video Map Display ....................................................................................................... 43
Go To .......................................................................................................................... 44
Drawing Tools ......................................................................................................... 45
Create a Shape ....................................................................................................................... 45
Create a Shape (Continued) .............................................................................................. 46
Create a Shape (Continued) .............................................................................................. 47
Telestrate .................................................................................................................................. 48
Minimum Safe Distance (MSD)......................................................................................... 48
3D Shapes ................................................................................................................................ 48
Geofencing .............................................................................................................. 49
Lasso Tool ................................................................................................................. 50
Quick Pic ................................................................................................................... 51
Gallery ....................................................................................................................................... 51
Track History............................................................................................................ 52
Track Search ............................................................................................................................ 52
Digital Pointer Tools.............................................................................................. 53
Elevation Tools ........................................................................................................ 54
Viewshed .................................................................................................................................. 54
Viewshed (continued).......................................................................................................... 55
Contour Lines ......................................................................................................................... 55
Resection Tool......................................................................................................... 56
Import Tool .............................................................................................................. 57
Rubber Sheet .......................................................................................................... 58

4
Unclassified

Working with 2D Imagery .................................................................................................. 58

Working with 3D Imagery .................................................................................................. 59
Alert ............................................................................................................................ 60
TAK Package Management ................................................................................ 61
TAK Package Management (Continued) ....................................................... 62
Toolbar Manager ................................................................................................... 63
Modifying a Toolbar ............................................................................................................. 63
Modifying a Toolbar (Continued) .................................................................................... 64
Export Custom Toolbar........................................................................................................ 64
Toolbar Management .......................................................................................................... 65
Clear Content .......................................................................................................... 66
Installing a Plug-in ................................................................................................ 67
Manual Install ......................................................................................................................... 67
Manual Install (Continued) ................................................................................................ 68
Update Server Install............................................................................................................ 68
Automatic Provisioning (Link EUD)................................................................................. 68

5
Unclassified

ATAK Overview
The Team Awareness Kit for Android (ATAK) is a Government-off-the-Shelf (GOTS) software application and mapping framework for mobile devices. ATAK
has been designed and developed to run on Android smart devices used in a tactical environment. The ATAK software application is an extensible mov-
ing map display that integrates imagery, map and overlay information to provide enhanced collaboration and Situational Awareness (SA) over a tactical
meshed network. ATAK promotes information flow and communications from the tactical environment to command enterprise locations.

The first time ATAK is opened, or after a Clear Content, a passphrase is auto generated to activate data encryption. The user can supply their own passphrase
by using Settings > Callsign and Device Preferences > Encryption Password > Change Encryption Passphrase. Following this step, the End User License
Agreement (EULA) must be accepted. Next, a prompt will appear to allow ATAK to have access to several areas of the device such as its location, pictures,
videos, SMS, etc. A prompt will appear with a TAK Device Setup screen to allow further configuration of ATAK. Changes and imports made here can always
be updated later. Finally, the Self-Marker can be placed manually on the map if GPS location is not enabled. Do this by following the instructions located in
the Self-Marker widget in the lower right corner of the map.

The toolbar sits at the top of the map

display. The features whose icons re-
side on the toolbar are discussed in
individual sections of this guide. The
three bars to the left of the toolbar
(or to the right when using the legacy
toolbar option) provide access to all
ATAK tools and plug-ins. Long-press-
ing the map hides the toolbar.

Select the [Magnifier] icons to zoom

in or out on the map. The map can also
be zoomed by using two fingers on the
screen to pinch and spread the map.

The Map Scale displays a 1 inch to X

mi/km reference on the map. The scale
adjusts with the map when zoomed in
and out.

Alerts and notifications are displayed Hint windows are available to alert users to changes or make suggestions about the use of tools the
in the lower left of the map interface. first time they are opened.

6
Unclassified

Compass Interactions

The Compass appears in the upper left and is used to control map orientation. It has two primary modes: North Up/Track Up (default) and Man-
ual Map Rotation/Lock. While in North Up/Track Up Mode, single press on the [Compass] icon to cycle between the North Up and Track Up map
orientation. Long press the [Compass] to call out the additional controls menu where the Manual Rotation/Lock and 3D features are available.
Select the [Rotation] icon to enter Manual Map Rotation/Lock Mode. When in Manual Map Rotation/Lock Mode, rotate the map orientation by pressing
on the map with two fingers and pivoting them in the desired direction. Single press on the [Compass] to lock the screen orientation, signified by the
appearance of the lock icon, and again to unlock the orientation for further adjustment. 3D controls are discussed in a separate section.

There are several options for interacting with the [Compass] icon. Tapping on the [Compass] icon cycles between North Up and Track Up for map viewing.
Selecting North Up keeps the map locked with North always being at the top of the screen.

Track Up allows the map to rotate based on the bearing of the device itself, keeping the Self-Marker facing north. Long-pressing the
[Compass] opens additional control menus for Manual Orientation and 3D Modes. Select the Android back button to center the screen
on the Self-Marker. Selecting the [Crosshair] icon will pan to the Self-Marker and lock the center of the screen to the Self-Marker’s po-
sition.

Manual Orientation
To place the map into manual orientation, long-press on the [Compass] and select the Manual Orientation control option. Once in
the manual orientation mode, touch the screen with two fingers and simultaneously rotate both fingers and the map will rotate ac-
cordingly.

To lock the map in its current rotation, long-press the [Compass] and tap the [Manual Orientation] control icon again.

7
Unclassified

Compass Interactions (Continued)

3D View
ATAK features 3D viewing of terrain and map items (Elevation Data such as DTED, Shuttle Radar Topography Mission (SRTM), or Quan-
tized Mesh are required to be installed). To enable 3D view, long press on the [Compass] to call out the additional controls menu and
select [3D].

A tilt angle indicator will appear around the

edge of the [Compass] when 3D view is active.
Touch the screen with two fingers and simulta-
neously swipe up or down on the screen to tilt
the view angle. Once the appropriate viewing
angle is set, select the [3D Lock] icon to retain
this view while panning the map. While viewing
the map from an angle, some map items will ap-
pear raised above the map surface if they have
defined elevations.

ATAK also allows the view to tilt to a 90-degree angle to look at a marker/image from a straight on perspective.
3D Models
ATAK supports the use of 3D models. OBJ models and other types from products such as Pix4D can be
imported via the Import Manager or can be manually placed in the atak/overlays folder prior to startup. If
using Import Manager, browse to the .OBJ file and import only that file, or browse to a .ZIP file that contains
the .OBJ file (and others) and import only that file. If using manual placement to the atak/overlays folder,
place a .ZIP file containing the .OBJ file (and others) into the directory and they will be imported on startup.

Once imported, a 3D Model icon will appear on the map. Zoom into the area of the icon until a loading ring appears. After the loading
process has finished, the 3D model will be projected onto the map. Enable the map 3D View and tilt the view angle to see the 3D model-
ing. Loaded 3D models will appear as their own category in Overlay Manager and can be toggled on/off or removed from there.

8
Unclassified

Compass Interactions (Continued)

First-Person View

ATAK provides the ability to view the map from a First-Person perspective. First-Person
simulates the view of a user looking straight ahead towards the horizon rather than
from the default overhead map view perspective. The First-Person tool can be activated
from the Additional Tools and Settings menu.

When selected, the First-Person Tool places buttons at the top of the map and two soft joysticks on
the right and left of the map.

To enable the First-Person View perspective, select the [First-Person View] button and
then tap the desired location on the map.

Once the map is in First-Person mode, the soft joysticks can be used to control the
camera. The right joystick toggles between driving and tilting the camera view.
The left joystick adjusts the elevation of the First-Person view. Elevation can be ad-
justed both above ground level and below ground level for a subterranean view.

Select the [First-Person] icon to disable First-Person mode and return to the default map view.

User Feedback

ATAK users can initiate feedback and issue reporting. To access the User Feedback Tool, navigate to Additional
Tools and Settings > Settings > Support > User Feedback. From the User Feedback dialog, select [+] and complete
the text fields using text entry or the Android speech to text feature accessed by selecting the [Microphone] on
the top row of the QWERTY keyboard. Associated files, like log files and screenshots, can be added by selecting
[Attachment] > [Edit] > and [+] to navigate within the Android internal file structure system to the desired file(s).
When the form is completed with the required information, select [Send] and the bug report will automatically be
uploaded to a repository when a connection is available.

9
Unclassified

Placement
Locations of interest can be entered using the Point Dropper tool. Select the [Point Dropper] icon to place internationally standardized markers
and other icons on the map, edit the data and share the markers with other network members.

Self-Marker

By default, the Self-Marker is displayed as a blue arrowhead with a white outline at the us-
er’s current location. The appearance of the Self-Marker can be customized by navigating
to Additional Tools and Plugins > Settings > Display Preferences > My Location Color/Size.
Custom options for the Self-Marker include marker size, main color and outline color. To
apply custom colors, select the [Custom] option and use the sliders under [Change/Cre-
ate Icon Main Custom Color] and [Change/Create Icon Outline Cus-
tom Color] to create the desired color/outline.

Long-press [Fine Adjust] to open the sub-radial and enter Coordinate

or MGRS Location. Long-press [Place Marker] to open the sub-radial
to place a CoT marker.

Other TAK users appear on the display as a colored circle. The color of
the circle represents the user’s Team affiliation, with additional letter-
ing inside the circle to identify the role of the user on the team. Team
Member markers that include a diagonal line indicate that the GPS lo-
cation is not available. A solid marker indicates that the user has GPS re-
ception. Available roles include: Team Member, Team Lead (designated
by a TL in the center of the marker), Headquarters (HQ in center), Sniper
(S), Medic (+), Forward Observer (FO), RTO (R) or K9 (K9).

The Polar Coordinate Entry option allows a marker to be placed relative to the current marker.
The Polar Coordinate option also allows for a range and bearing line to be placed in addition to the marker (point).

Long-press or tap [Communications] to open the Communications sub-radial. Chat and Send Data Package are always available to
communicate with the user. If configured in Settings; Email, SMS Messaging, TAK Chat (XMPP), VOIP and Cell Phone communication
options will also appear on the sub-radial
10
Unclassified

Point Dropper
Select the [Point Dropper] icon to open the Point Dropper menu, which contains several icon-
sets, recently added points and an Iconset Manager.

The basic Markers symbology affiliations are: Unknown, Neutral, Red and Friendly. Select a
marker from the pallet, then tap a location on the map to drop the marker.

To add a marker by manually entering coordinates, choose the marker and long-press a location on the map. A window will
open allowing the user to enter the desired coordinates (MGRS, Lat./Long, etc.). Change the standard naming convention by
entering values into the custom prefix and index fields or leave blank to use the defaults. If val-
ues are entered, the next marker will be dropped with the prefix name and starting number(s)
or letter(s) and every subsequent marker will be assigned
the next consecutive number(s) or letter(s).

Select the mission specific iconset to open marker options including Contact Point (CP),
Initial Point (IP), BP/HA, Waypoint, Sensor or Observation Point (OP).

The Mission iconset allows the user to place mission-specific markers. For
instance, the Sensor marker can be placed with a visible Field of View (FOV)
direction and length. The FOV can be adjusted from the Sensor radial.

Swipe in the iconset area or select the [Iconset Name] field, bring-
ing up the iconset drop-down, to move between iconset pallets.

The Vehicle Models iconset places to-scale 3D models of the select-

ed icon. If the [Edit] option is selected, modifications to the model
can be made in the same manner as the Rubber Sheet feature. See
the Rubber Sheet section for more details. The Free Rotate / 3D View
allows the user to quickly access the map rotation and 3D view of
the Vehicle Model or other objects on the map.

11
Unclassified

Point Dropper (Continued)

The last point placed is shown at the bottom of the

Point Dropper window. The information for all re-
cently placed points can be accessed by selecting
the [Clock] icon. This displays the marker icon, name,
coordinates, elevation, and range & bearing informa-
tion. The user can send, rename or remove any re-
cently added markers by selecting the [Arrows] next
to the marker to reveal [SEND], [RENAME] or [DEL]
buttons.

Select the [Iconset Manager] (gear) button to add or delete iconsets or to set the default
CoT Mapping.

12
Unclassified
Radial Menus
Long-press [Fine Adjust] to open the sub-radial which allows the ability to enter coordinates or MGRS location.

Select [Details] on a marker radial to make desired modifications including: Coordinate, Elevation, Name, Type and Remarks.
Selecting Marker Type opens a dialog box with extra categories. File attachments including images, can be associated with the
object by selecting the [Attachments] (paperclip) icon. Once all the desired modifications have been made, the Marker can be
sent to other network members using [Send]. The information can be broadcast to all members or sent to specific recipients.
Select the [Auto Send] option to broadcast the marker to other TAK users on the network, with updates automatically sent
about once every 60 seconds.

13
Unclassified

Range Tools
Range Tools provides several types of measuring tools for measuring direction and distance. Select
the [Range Tools] icon from the Additional Tools & Plugins window to open the Range Tools toolbar.
The toolbar includes a R&B circle, Dynamic Measure Line, Static Measure Line and Bullseye.

Range & Bearing Line

The R&B Line tool calculates the distance between two locations on a map, the distance between an object on
the map and another point on the map, or the distance between a point on the map and the Self-Marker. Select
the [R&B Line] icon on the toolbar to toggle on (yellow) and off (white). When yellow, tap a point to measure from
or long press to measure from the Self-Marker to that point. Once the first point or object is selected, tap another
point or object from which to measure. Once endpoints are set, the line is stationary.

Select the [Dynamic R&B Line] icon to begin creating a line that can be moved and repositioned by the user.
Tap once to place an endpoint, then again for the second endpoint. This R&B Line remains unlocked. Touch and
drag an endpoint to move it. When the desired location is established, select the center of the line and use the
[Pin] button on the radial menu to pin the position of the bearing line. This pinned R&B Line will remain after the
Dynamic R&B Line is toggled off.

The pinned R&B Line will show the azimuth, distance and depression or elevation degree between the two points. To repo-
sition an anchor point, long press on either end of the bearing line, then tap another location. The line will be moved to the
new location with an adjusted distance and azimuth.

Select either end of the R&B Line to display the R&B Line end point radial.

To make fine adjustments to either end of the line, tap the [Fine Adjust] icon
on the radial. Crosshairs appear and the area is magnified. Drag finger inside
the magnified area to finely position the end of the bearing line, then select
[Confirm] to accept the new position or [Cancel] to discard it. To delete the
bearing line, select the [Delete] icon on the radial and the line will be deleted.

14
Unclassified

Range & Bearing Line (Continued)

To obtain even further options for the bearing line, tap along the line and the R&B Line radi-
al will display. See Bloodhound (Multiple Bloodhounds) section for more details about the
Bloodhound radial option.

Select the [Angle Bearing Units] radial to display additional bearing unit options, including De-
grees Grid (measured in relation to the fixed grid lines of the map projection), Mils Grid, Degrees
Magnetic, Mils Magnetic, Degrees True or Mils True.

Select the Distance Units radial to display additional distance unit options,
including Nautical Miles, Meters/Kilometers or Feet/Miles. If the length of the
R&B line is longer than approximately 30km, the line will then follow the con-
tour of the ground versus being a straight line from one endpoint to the other.
To make changes to the parameters of the line, select the [Details] icon on the
radial.

The Elevation Profile option at the bottom of the Details page displays
the elevation profile for the selected R&B Line at the bottom of the map
when selected. The Elevation Profile provides information on Max Alti-
tude, Min Altitude, Gain and Loss. By checking the [Show Viewshed]
checkbox, a viewshed will be shown along the line. Slide the blue dot
left or right to advance the viewshed along the line. The R&B Line can be
sent or broadcast to other users from the Details menu.

Range & Bearing Tool settings can be customized in Settings > Show All
Preferences > Display Preferences > Basic Display Settings > Unit Dis-
play Format Preferences.

15
Unclassified

Range & Bearing Circle Tool

The R&B Circle Tool uses one or more range rings to mark a point on the map. Select the [Circle] icon on the toolbar to toggle the Circle Tool
on (yellow) and off (white). When yellow, select the desired location on the map for the center of the circle. If the Self-Marker or a marker is
selected for either the center or the radius of the circle, the circle’s center or radius will change when the markers are
repositioned.

To make further adjustments to circle parameters, tap the center of the circle to display the circle’s
radial menu.

Select the [Details] icon on the radial to modify the circle center location, the radius, the unit of
measurement, the number of rings and remarks. After making adjustments, the circle will be re-
drawn as specified. The R&B Circle can be sent or broadcast to other users.

Bullseye Tool
The Bullseye Tool is an additional Range & Bearing
option that gives more information than the stan-
dard R&B Line or R&B Circle. The Bullseye provides a
circular grid with lines every 30 degrees. The angles
can be changed to be either toward the center point (Red) or away
from the center point (Green).

Range Rings can also be added. The Bullseye can be sent or broad-
cast to other users by selecting [Send] from the Details window.

16
Unclassified

Route Planning and Navigation

Route planning and navigation capabilities allow the user to create or modify routes and set navigation objectives.

Routes

The Routes Tool allows users to quickly create, view and modify routes. Select the [Routes] icon from
the Additional Tools and Plug-ins window to see a list of existing routes, create new routes, import
routes, sort, export, delete routes and search for routes. For an individual route, the user can view the
details, send, navigate to, edit, reverse or delete the selected route.

Route line thickness, line style and opacity can be changed as well. To change route line
thickness, select the [Line Thickness] button to the right of the [Color] button and use
the slider to adjust to the desired line thickness.

To change the route line style, select the [Line Style] button to the right of the [Line Thickness] button and choose
one of the available line style options. Route color opacity can be adjusted by selecting the [Color] button and then
adjusting the opacity slider in the Choose Route Color window. If the [Show All] box in the lower right is unchecked,
only routes that are visible in the current map screen will be listed.

Select the [Import] icon to import a route in one of two ways: from a file or from a line on the
map. Choose [File Select] to navigate to the location of the saved routes (in KML or GPX for-
mat) and select the desired route. The saved route will be imported and displayed on the map
and will be listed in the Overlay Manager under the Navigation category. Tap [Map Select] to
choose a line present on the map and have it converted into a route. Examples of lines that can
be used include a drawing tool polyline, a drawing tool telestration line or a line within a KML
overlay.

To create a new route, tap [+], select the route type, and follow the onscreen instructions. Select a
location on the map to make it part of the route or long press to create check points along the route.
Select [Draw] to manually create a route segment by using a finger drag motion on the map. Once
the [End] button is selected, the Route Details window opens.
17
Unclassified
Routes (Continued)

Within the Details window, choose to navigate to the route by selecting the [GO] button, change the color and opacity of the
route, change the line width of the route, change the route details and modify the check points. Select [Undo] to undo any mod-
ifications to the check points.

The Route Details may be changed by selecting the [Primary, Infil] button, next to the [Line
Style] button. Change the method of movement (driving, walking, etc.); Infil or Exfil; Primary
or Secondary, and Ascending or Descending check points.

Check points can be modified as follows: Rename, Add Cues, Align (only available when us-
ing a route alignment plug-in) or Delete. To rename the check point, select the current check
point and a Rename window will appear. After changing the name, select [Done]. To add a
cue to a check point, select the box to the right of the distance column. The Cues window will
appear and a preset cue may be selected or a custom cue may be entered. When the desired
cue is added, select [OK].

The bottom of the route details screen provides the option to Send, Export, Edit, view the Elevation Profile and
view/modify Route Preferences. When the Send option is selected, the route may be sent to selected recipients
on the network or broadcast to all available recipients. The route can be exported to a file in KML, GPX, KMZ or a
Shapefile format. Exported files can be found in the “/atak/export” folder.

The Elevation Profile icon allows the ability to view the elevation profile for that route. The Elevation Profile provides information on Total Distance, Maxi-
mum Altitude, Minimum Altitude, Gain and Loss. If the [Show Viewshed] checkbox is checked, a viewshed will appear on the route and trace the route as
the Elevation Profile blue dot is moved along the graph.

The Route Tool offers two different sets of

radial options depending on which por-
tion of the route has been selected. A line
segment or a point can be selected.

18
Unclassified

Routes (Continued)
Route navigation can be initiated by selecting the route’s navigation radial option or by selecting the route’s [Naviga-
tion] icon in the Routes listing. Navigation information will appear in the top left corner.

If a cue has been established, when the user gets close to a check point, the cue for that check point will be displayed; if the volume is
turned up, the cue will be audible. Voice Cues can be turned off by selecting the [Mute] icon. Speed units can be changed during navi-
gation by tapping the top row of the navigation display to cycle between MPH, KMH, KN and mps. The displayed cue can be collapsed to
provide more screen space.

The arrow buttons on either side of the navigation information allow the user to move forward to the next check point or move back to the previous check
point. Selecting the [x] will end navigation. Tapping on the distance or speed displayed will toggle the units between miles/mph, km/kmph, nm/kt and km/
mps.

When navigating a route while titled in 3D mode, a 3D billboard feature can be enabled
to pop up an image associated with a marker. As the user approaches a marker with an
attached image, the image associated with that marker will pop up, once the user is within
the defined billboard render distance. The image remains displayed until the user has trav-
elled past the marker.

The default distance for images to appear during navigation can be changed in Settings
> Tool Preferences > Specific Tool Preferences > Route Preferences > Billboard Render Dis-
tance. The billboard feature can also be turned off by toggling the Settings > Tool Prefer-
ences > Specific Tool Preferences > Route Preferences > Show Attachment Billboards.

Selecting the [Quick Nav] icon will begin navigation (a bloodhound) to any point, object or route on the map. A pairing line is drawn and
navigation information is displayed in the lower left portion of the screen. Estimated time to the next check point, speed and distance to the
next check point are updated as the user moves. See the Bloodhound section in this document for more information.

19
Unclassified

Red X Tool
The Red X Tool provides a quick way for discerning coordinate and elevation infor-
mation for a point on the map. Select the [White X] on the toolbar to toggle the Red
X tool into a movable state.

When first selected, the icon will turn yellow denoting that each time the map is
tapped, the Red X will move to that location. The widget in the upper right of the
screen will show pertinent location information for the location of the Red X.

When the icon on the toolbar is tapped again, the Red X will lock to its current loca-
tion, the icon will remain yellow and a lock icon will appear. Long press the [Red X]
icon on the toolbar to disable the tool.

Selecting the [Red X] on the map will open its radial menu. Sub-radial menus are available for additional functionality.
Long press the yellow arrow to access.

Note: Red X is not persistent. When ATAK is closed and then reopened, the Red X will no longer be present.

20
Unclassified

Bloodhound
The Bloodhound Tool provides support for tracking and intercepting a map item. It allows for the selection of two points on the map and/or
map objects and displays Range & Bearing information between the chosen tracker and the target. Select the [Bloodhound] icon to open the
Bloodhound Tool. A prompt will appear to choose where to start by tapping the [From Reticle] (default = local device’s Self-Marker) and where
to bloodhound (track) to by tapping the [To Reticle].

Targets include map objects like other user’s Self-Markers, SPIs, CoT Markers, Shape center points, Range & Bearing end-
points, etc. If a map location is selected instead of an object as the target, Bloodhound will place a waypoint marker there.
The Self-Marker will then track towards the waypoint. Select [OK] and Bloodhound will be activated.

If either point moves, the green widget in the lower left will show the updated information. As the tracking
object begins to navigate toward the target, the Estimated Time of Arrival (ETA) will update accordingly.

The green line showing the direct path from the tracker to the target will flash when a user-defined ETA outer
threshold is reached (default = 6 minutes from target). The line will flash as the tracker continues toward the
target until the next ETA threshold is reached (default = 3 minutes). The line will turn a flashing yellow until
the final ETA threshold (default = 1 minute) is reached. The line then flashes red until the target is reached.

Colors and thresholds can be modified in Settings > Tool Preferences > Specific Tool Preferences > Blood-
hound Preferences.

Route Mode

Select the [Route Mode] icon in the bottom left corner of the screen when the Bloodhound Tool is
active to activate Route Mode.

The [Route Mode] feature requires that a route planner (e.g., the planner that is bundled with the VNS Plug-in)
has been installed and configured.

21
Unclassified

Route Mode (Continued)

Once the route planner has been configured, the Bloodhound’s Range & Bearing line will become a route. This will
update periodically (the default is 1 second) to determine if the route from the start map item to the end map item
needs to be calculated. This occurs when either the start or the end map item is a pre-configured distance away
from the calculated route (the default is 150 meters). This setting can be changed in the Bloodhound preferences.

Navigation Mode with Route Mode

When Route Mode is active, the Navigation Interface can be activated
by selecting the [Open Navigation Interface] icon. The navigation
interface provides voice and visual cues like those that are used when
navigating traditional routes.

Multiple Bloodhounds
To create multiple bloodhounds, open Range Tools, select the [R&B Line] icon, then select any two markers on the
map. Once the R&B line is created between the two map items, select the line to open the radial, then select the
[Bloodhound] icon from the radial. The bloodhound information will be displayed on the R&B Line.

If either point moves, the Bloodhound information shown on the R&B Line will be updated. As the tracking object
begins to navigate toward the target, the Estimated Time of Arrival (ETA) will update accordingly.

22
Unclassified

CASEVAC
The casualty evacuation CASEVAC Tool is used to denote any casualties/injuries in the field. The CASEVAC
tool follows Appendix G of the JFIRE 2016 publication and can be used for either CASEVAC or the more
restrictive MEDEVAC.

To drop a CASEVAC marker, select the [CASEVAC] icon in the additional tools
menu and select the desired location on the map. Sub-radial menus are
available for additional functionality. Long press the yellow arrow to access.

The nine lines of information can be completed in the CASEVAC details window which is opened by selecting
the [Details] icon from the CASEVAC radial. The ZMIST (ZAP number, Mechanism of Injury, Injury Sustained,
Symptoms and Signs, Treatment Given) report and/or a Helo Landing Zone (HLZ) brief can also be accessed
in the Details. Select the [MEDEVAC/CASEVAC Brief] icon to display the brief which can then be copied and
used elsewhere. Select the [Attachment] (paperclip) icon to attach files, including images to the marker. Once
all applicable information has been added, the CASEVAC may be sent to available contacts by selecting [Send].

Multiple ZMIST reports can be associated with one CASEVAC by selecting [ADD] next to the initial ZMIST head-
ing and section. A ZMIST report can also be deleted by selecting the [Delete] icon. ZMIST submenus contain
hotkeys for common entries and allow for text entries for nonstandard conditions.

23
Unclassified

Maps & Favorites

Select the [Maps & The following categories are shown: Imagery/Maps,
Favorites] icon to list Mobile and Favorites (FAVS). Select [Online/Local] on
the imagery loaded the Mobile tab to toggle between using an online map
in the application. source or locally stored map layers over a desired area.
Select the [FAVS] tab to review a previously saved view
or to add the current view.

Saving a Map Layer

To save a local copy of a map layer, choose the [MOBILE] tab and toggle to [Online]. Select the right arrow to
expand the Map Source option, then tap [Select Area] to define a region of interest. A prompt will appear pre-
senting four options for map area selection: Rectangle, Free Form, Lasso or Map Select. The Rectangle option
uses the top left and lower right corners to denote the area to be downloaded. The Free Form option provides
the ability to create a custom area to be downloaded by tapping different points on the map until the shape
is complete or the end button is selected. Lasso provides the ability to draw a lasso around a specific area on
the map to be downloaded.

Map Select allows for an already existing shape or route to be select-

ed as the area intended for download. If a route is chosen, a prompt
will be provided to enter a Route Download Range. This is the distance
from the route that will be downloaded. Drag the map source slider
end points to select the resolution for the tileset being downloaded.
The number of tiles to be downloaded will be indicated. Select the
[Download] button to begin the download process.

A new tileset can be created or the tiles being downloaded can be added to an existing one , or the
download can be created as an Overlay file to layer on top of an existing map layer. Enter the name to
be applied to the selected layers and select [OK]. A status indicator will appear to show the download
progress. A download-in-process can be canceled by selecting the [Cancel] button. Online and Local
map layers can be toggled as needed. When [Local] is selected, a listing of the downloaded imagery
layers in the current map interface appears. The local layers are listed in order beginning with the area
closest to the map center. Select the [Outline] checkbox to toggle the outline layers on or off. When the
user selects a layer from the list, map source data corresponding to that downloaded layer will be used
as the source for map data.

24
Unclassified
Saving a Map Layer (Continued)

Imagery can be imported via the Import Manager tool or placed directly into the atak folder structure for use by the application. For instructions on which
subfolder a specific file type should be placed, refer to the information found in Settings > Support > ATAK Documents > ATAK Dataset Instructions. All im-
ported imagery will be listed under the [IMAGERY] tab and function the same as the [MOBILE] tab.

If [Show All] is checked, all available layers are listed. Otherwise, only layers that are visible
in the current map view will be listed. Imagery based map products (e.g., MrSID, GeoTIFF,
NITF) that are placed in the atak/imagery folder will appear under the IMAGERY tab when
ATAK is restarted. To view the list of supported products, select Settings > Support > ATAK
Documents > ATAK Dataset Instructions.

Bookmarking a Location

To save the current view and displayed imagery, select the FAVS tab and tap [Add Current View]. A prompt will appear to
name the view, which will be saved along with its coordinates and the map source being used. Selecting a view in the FAVS
listing will pan the map to that location and transition to the map source used in the saved view. Saved Favorite views can be
sent to other TAK users by selecting the [Send] option.

WFS Support (Web Feature Service)

WFS imagery is supported and can be ingested in several different ways. Existing WFS XML configuration files can be imported through the Import Manager.
The files can also be placed into the atak/WFS directory manually.

Additionally, WFS Imagery can be added by selecting the right arrow at the bottom of the Maps & Favorites Mobile tab to expand the Map Source option,
selecting [+] and then entering a WFS Imagery Service URL. After querying the service, a list of available imagery sets will be presented. Select the required
services for import and then select [OK].

25
Unclassified

Overlay Manager
Overlay Manager sorts map objects, files and overlays into categories and subcategories. Select the [Overlay
Manager] icon to bring up the list of categories. These include: Teams by color, Alerts, Markers, Data Packages,
Navigation, Shapes, Hashtags, Elevation Data, Map Controls, as well as other file types. Selecting a category
will open a detailed listing of the items available in that category. The available items within each category are
annotated on the menu entry, allowing the user to reference sub-menu content.
When a displayed item in a specific category is selected, the map
view will pan to that item and its radial will display.

Visibility of any category can be toggled on and off using the [Eye]
radio buttons. When the eyeball icon appears white, the correspond-
ing layer objects are visible. An outlined eyeball indicates that the
subcategory has some, but not all, objects visible. An eyeball with a
line through it corresponds to a layer that is not visible.

The Markers category offers additional visibility controls for CoT markers allowing for groups of them to be toggled be-
tween various display states. After selecting the Markers category, select [Slicer], which appears beside the [Multi-Se-
lect] button at the top of the window.

CoT markers should now be displayed in a grid format. Tapping the [All] button will toggle all CoT markers on the map
between the three visibility states; visible, points, and hidden.

The left side of the grid breaks up the CoT markers by affiliation, using their first letter to denote the affiliation. Tapping [F] toggles the visibility
states of Friendly markers, tapping [N] toggles the visibility states of Neutral markers, etc. The letters visible at the top of the grid denote the tracks
that these markers belong to: Space (P), Air (A), Ground (G), Sea (S), and Subsurface (U).

Tapping any letters at the top of the grid will toggle the visibility states of CoT markers that match that track
regardless of their affiliation. A specific marker group from a specific affiliation and track can also be toggled
by selecting the marker icon at the intersection of the two attributes.

To return to the Overlay Manager marker sub-categories, select the [List] icon.

26
Unclassified

Overlay Manager (Continued)

The objects in a category listing can be sorted alphabetically or by proximity to the Self-Marker.

If the [Show All] checkbox is checked, all map items in Overlay Manager are listed. If the [Show All] checkbox
is unchecked, Overlay Manager filters map items based on the current map view.

Additional filters can be applied to the Markers category. Available filters include Auto
Send and Self Authored. The Auto Send filter will only show markers that have the Auto
Send feature enabled.

The Self-Authored filter will show only markers created on the local device and exclude all markers received
from other TAK contacts. To apply, select [Filters] to open the filter dialog, select a filter to activate it, then [OK].
To deactivate a filter, select it a second time.

Available overlays can be searched for by selecting the

[Search] icon in the main Overlay Manager toolbar. Select
specific categories of overlays to narrow the search results.

27
Unclassified

Common Operating Picture (COP) Refresh

The COP Refresh removes any temporary map items from the map. These include Self-Markers from other
users, SPI’s from other users and ADSB Aircraft Tracks.

Selecting COP Refresh will display a window to confirm the deleted items.

Hashtags and Sticky Tags

Hashtags and Sticky Tags can be added to map items to aid in categorizing and
searching for items.

Hashtags can be added to map items in the Remarks field of the Details window or by
selecting the [#Hashtags] icon in Overlay Manager. Select [+] to open the New Hashtag
dialog. Enter a Hashtag and select [Done].

After the new Hashtag has been created, the [Add to

Hashtag] dialog box appears, and the hashtag can be added
to items via Map Select, Lasso or through Overlays. Multiple
items may be selected. Once all desired items have been cho-
sen, select [Done]. The Overlay Manager will list all created
hashtags along with the tagged items. If one of the tagged
items is selected, the map will pan to that item and its radial
will display.

Select [#] to open the Sticky Tags dialog. Enter a name and select [+] to apply that sticky tag to all sub-
sequently placed map items. More than one sticky tag may be added at a time. To discontinue adding a
particular sticky tag to subsequent items, uncheck the checkbox beside the sticky tag. Select [Delete] (the
trashcan icon) to remove a sticky tag from the list. Select [Done] to confirm any changes made.

28
Unclassified
Multi-Select Export & Delete

Existing overlays can be exported to a file or directly to other users for use in other applications. To export, select the [Multi-Select Action]
icon, select [Export], choose a file format, then select each category of overlays that should be included in the export file. Select [Previous
Exports] to send to other users.

After the selections have been made, tap [Export], enter

the desired file name and select [Export] to create the file.

A notification will appear when the file has been export-

ed. Select [Done] to save the file or [Send] to send to a
TAK Contact, TAK Server or an application.

To delete existing overlay items, tap the [Multi-Select Action] icon, then the [Delete] icon.
Items may be selected as a category (Markers, Shapes, File Overlays, etc.) or individually (spe-
cific neutral marker, for instance). When all selections have been made, select the [Delete]
button to remove the specified items and confirm deletion.

Elevation Data

By default, ATAK will stream DTED0 elevation data if the device was not provisioned with elevation data. To disable the
default preference, navigate to Settings > Tool Preferences > Specific Tool Preferences > Elevation Overlays Preferences
and uncheck [Stream Elevation Data].

To view the area of coverage, select [Overlay Manager],

then toggle the Elevation Data radio button (eye). The yellow
grids indicate where the DTED0 data has been downloaded.
Any additional elevation data sources will also be listed un-
der the Elevation Data category.

Note: If multiple streaming sources of elevation data are

configured (i.e., DTED0 and Quantized Mesh), DTED0 takes
precedence when querying elevation data.
29
Unclassified

File Editing

The color and thickness of file overlays (Shapefiles, KMZ, DRW,

etc.) can be edited by selecting [Edit] (pencil icon) from the list-
ing.

Map Controls

Different aspects of the map can be controlled by using Map Controls in the Overlay Manager. Options include
Displaying shape labels for File Overlays shapes, the ability to enhance visualization of depth when looking
straight down in 2D mode with the Enhanced Depth Perception option, adjusting the scaling of map imagery
(useful for using a different zoom level for imagery with multiple resolution layers), the ability to use a slider to
change the Map Imagery Transparency, and toggling of Sun/Moon Illumination.

3D Models - Metadata

When ATAK receives a 3D model that has been edited by WinTAK, Overlay Manager displays the metadata associated with
the model. Metadata includes information such as the Callsign of the user who performed the editing, terrain model em-
ployed, etc.

Other Overlays

Additional overlays are available under the Other Overlays category of Overlay Manager. Select
[Overlay Manager], then [Other Overlays] to access the menu. Toggle the Eye icon to Enable/
Disable these overlays individually.

Center Designator can be used to pinpoint a location’s coordinates and elevation data.

30
Unclassified

Other Overlays (Continued)

Eye Altitude can be used to estimate the current altitude based on the zoom level over the map
surface.

Grid Lines control the visibility of MGRS

grid lines laid over the map surface. These
grid lines will automatically adjust based
on the current zoom level.

The Heatmap Overlay’s visibility can also be controlled from Other Overlays, it’ll function identical-
ly to how it does in Elevation Tools. Lastly, Off-Screen Indicator visibility can also be toggled on/off.
Offscreen indicators appear for newly placed/received markers that are no longer in the current
map view but are nearby (zoom level dependent).

31
Unclassified

Radio Controls
Select the [Radio] icon PRC-152-A is a Harris voice and data radio, this enables point-to-point and dis-
to access controls for plays the coordinates of the 152-A SA Radio. Note the text will state whether
the currently supported the device is supported. Harris Soft KDU is a keypad display unit to access the
ATAK radios. Harris radio controls.
ISRV (Rover) is capable of video downlink from aircraft to ground through a
TacRover and TacRover-E.

PRC-152 Connection
Connect to a PRC-152 Harris Radio and select the configure icon on the Radio Controls menu.
The Cable Configuration window will display to choose the appropriate cable configuration.

A description of each cable and the radio’s hardware interface is provided. Select [OK] to exit
the cable configuration selection menu.

Slide the [OFF] button to [ON] in the PRC-152 section to begin connecting.

Once a connection is established, point-to-point protocol communication is available and is

indicated on the Radio Controls menu. Other radios on the same network will appear on the
map once squelched.

32
Unclassified

Rover Controls
Slide the [OFF] button to [ON] in the ISRV (Rover) section to begin connecting through an Ethernet connection. ATAK scans
through frequencies to establish an active feed. When the connection is established, the antenna icon will turn from gray to
green and will indicate that it is connected.

Select the [Rover] menu item to open the Rover Controls menu. The Status field will indicate the device connection status and
the current waveform. The waveform can be changed by accessing the Frequency Scan menu. The Frequency or Module/Channel
(DDL) can be changed from the Rover Controls menu, as well as entering the Settings menu, launching the web configuration
page for the Rover device, and watch the video. The preset can be added through this interface as well. Setting the Module and
Channel will automatically change the waveform to DDL. The [Recently Used] and [+] buttons have been added to save hand
jammed frequencies and DDL, for quicker viewing capability. Tap [+] to add a channel to the recently used list. Video frequencies
and DDL information will not automatically be added to the list.

The frequency can be manually changed by tapping the current frequency entry or
by opening the Scan Frequency Range Menu by selecting the [Scan] button. Change
the frequency by entering a [Start Freq Code] and [End Freq Code] and selecting
[OK]. ATAK will scan all available frequencies within the established range. Select
[Next] on the Rover Controls menu to advance to the next available stream in the
range. Tap the [Waveform] drop-down to open the menu of available waveforms and
select the desired waveform from the list. Additionally, the user may choose between
L-Band, S-Band, C-Band Low and C-Band high, Ku-Band Low, Ku-Band Low (2) and Ku-
Band High.

Select the [Settings]

icon to access the
Rover Configuration
settings. Options are available to ini-
Select the [Watch]
tiate the Web-based Configuration
icon to view a video
for the Rover device in a web brows-
stream.
er, Ping Radio, Initiate Test Video,
engage the Raw Video Recorder and
Advanced Options.

33
Unclassified

Data Package Tool

Select the [Data Package Tool] icon to open the data package tool. When opened, the tool will display any data
packages that have been stored, as well as provide options for building new packages, downloading them from a
server, deleting and exporting them. When preparing for an operation, a team leader may prepare a route, place
markers, shapes and imagery on that map that pertain to operation objectives. All of these items can be included into a data
package and sent to each person on the team. This allows everyone on the team to have the same operational information.
In addition to Map Items (with or without attachments), external files (from the SD card) may be included in a package. The
visibility of the package or its elements may be toggled on or off.

Select the [+] icon in the Data Package Tool to create a new data package.
Choose the selection method; Map Select, File Select, Overlays or Lasso to add
items to the Data Package. The Map Select option allows for one or more items
to be selected from the map and included in the Data Package. The File Select
option displays the file browser which can be navigated to the desired files to
be included in the data package.

The Overlays option opens the Overlay Manager tool where categories and individual items can be selected to be included in the data package.

The Lasso option allows for a lasso to be drawn around items on the
map to be included in the data package. External Native Data items
(such as the map source) are also included when using Lasso. The items
that have been selected with the Lasso can be modified to remove any
unnecessary items. Choose [Done] or [Select] with Lasso when fin-
ished, then choose to either create a new Data Package or add the items
to an existing Data Package.

When items are added to a data package, a red asterisk will appear on the data package name to indicate it needs to be saved. Select the [Save] icon to save
the changes.

The information under the package name includes the callsign of the user who created the data package and number of items in the data package. Select
the name of the data package to view the included items. Toggle the visibility radio button to control data package content visibility on the map interface.

When done with modifications, select the [Send] icon to open a list of options for sending the data package including
TAK Contact, TAK Server or another application. If the package size is larger than the value set in the Preferences, the
size shown in the package list will display red and the user will have an option to override the limit when they send.
The threshold size may be changed in Settings > Tool Preferences > Specific Tool Preferences > Data Package Control
Preferences.
34
Unclassified
Data Package Tool (Continued)

When sending a data package to a TAK contact, either Select All, Show All or toggle recipients by selecting or de-se-
lecting their corresponding checkboxes.

When the [Delete] icon is selected, a prompt wll appear to remove or leave the contents of the data package on the
map interface.

Select the [Download] icon to access an existing data package from a TAK Server.

Select the [Transfer Log] icon on the Data Package Tool menu to view the file transfer log of imported and
exported data packages. The Data Package Tool can be customized in Settings > Tool Preferences > Specific
Tool Preferences > Data Package Control Preferences.

Select the [Multi-Select Action] icon to export or delete multiple data packages via the Overlay Manager.

Select the [Search] icon to locate the desired data package in the listing.

An existing data package can be modified by selecting the [+] icon and following the same steps as above.

Select the data package listing name, then select the [Edit] icon to change the
name or add remarks or hashtags.

35
Unclassified

Contacts
The Contacts list includes a variety of ways in which a user may communicate with other users on the local network or TAK Server. A default com-
munication type (shown in the last column) may be selected and used until another type of communication is selected.

There are several ways within the Contact Tool to filter the contact list. To only see contacts that use a
specific communication type, select the arrow next to the word “Contacts” at the top of the list window.
A window will open showing all the types of communication, such as Data Packages, GeoChat (built-in
chat capability), Email, Phone, SMS, VoIP and XMPP. Choose one of these to ensure all contacts without
that type available are filtered out of the contacts list.

Note: If the type chosen is not the default for a user, the type can be accessed through their radial.

Options located at the top right of the contact’s window, available for all communication types, include
Multi-Select, Favorites, Sorting and Searching. The multi-select option provides the ability to filter out
contacts. Any number of contacts can be filtered. Filtered contacts will be removed from the map and
can be removed from the Contact’s window, if [Hide Filtered Contacts] is enabled.

To add a contact to Favorites, select the [Star] icon, select the [+] icon, choose the contact(s) and then select [Add].

Select the [Sort] icon to sort contacts alphabetically, by connection status, by unread messages or by distance from
the Self-Marker. The sort type will change with each tap of the icon.

Select the [Search] icon to search for a specific contact. As the search criteria is entered, any contacts that meet the
criteria will begin to appear.

The contacts list also has two filters available at the bottom of the screen. The [Unread Only]
box, when checked, will display only contacts with whom there are unread message waiting.
When unchecked (default), all available contacts are displayed. The [Show All] box, when
checked (default), will display all contacts regardless of their location. When unchecked, only
contacts that are visible within the current map view will be displayed.

If a contact is no longer online, it will be indicated by changing the contact listing to a yellow
color and the marker changes to gray both in the list and on the map.

36
Unclassified

Contacts (Continued)
Profile cards (accessed by selecting 1) Role, software type and version in- 2) Location information 3) Available types of communication.
the second to last column) are avail- stalled, node type, default connector,
able for each contact containing last reported time, battery life
additional information about that
contact including:

GeoChat Group Management

GeoChat Group Management is initiated through Contacts. Select the [Contacts] icon, then select the [Groups] line (not the communications
button). The local device can create, edit and delete chat groups, as well as sub-groups. To create a chat group, select the [Add Group] icon,
enter a group name, select the contacts to add to the group and select [Create].

If a parent group is being created, no contacts need to be added at

this level. To add a nested group, select the parent group, select the
[Add Group] icon, enter a group name for the sub-group, choose
the contacts that will be in the group, and select [Create]. Groups
may be managed using the add/delete contacts or add/delete Geo-
Chat groups options.

To add users to an existing group, select the [Groups] line (not the
communications button), then select the name of the group to add
users. Select the [Add Users] icon. A window will open allowing the
group creater to add users to the selected group. Select the [Add]
button when all the users to be added are checked.

37
Unclassified

GeoChat Messaging

If the user specifies the GeoChat (built-in Chat capability) communication from the drop-down at the upper left, group and
person-to-person messaging is filtered. In addition to the toolbar options that are available with other communication types:
Favorites, Sorting and Searching, the GeoChat communication type also has a History option ([Clock] icon). If the History op-
tion is selected, chat history with the selected contact is displayed.

To view messages from or send messages to an individual, select the desired contact’s [Communication] icon.

Select [All Chat Rooms] to view all messages from or send messages to all present on the network and TAK Server. Other
groups available for viewing or sending messages are: Forward Observer, Groups (user made), HQ, K9, Medic, RTO, Sniper, Team Lead and Teams. If the user’s
current role is Forward Observer, HQ, K9, Medic, RTO, Sniper or Team Lead, that user can view or send messages to all other contacts with the same role. If a
GeoChat message is sent from the top level of Teams, it will be sent to all contacts, similar to All Chat Rooms.

When a sub-team is chosen, messages can only be sent to the user’s active (my team) team color. When a parent group is chosen, messages are sent to all
members of the parent group, as well as all of the sub-groups. When a sub-group is chosen, messages are sent only to members of the sub-group. Individ-
uals or groups listed within GeoChat may be removed from the contacts menu by toggling off their visibility in Overlay Manager.

Selecting in the [Free Text Entry] area will bring up an onscreen keyboard. Selecting [Add Attachment]
will display selection options for choosing items to send. The selection options presented are identical to
those seen when creating a Data Package. Map items may be selected by using [Map Select] or [Lasso].
Select [Overlays] to choose from previously imported files, or map items, listed in the Overlay Manager.
Files on the device’s internal storage, or SD card, can be selected using [File Select]. After the attachment(s)
have been selected, an entry will be generated in the chat indicating that a data package has been sent.
Select [More Details] to see a breakdown of the sent attachments.

The items sent can be seen listed in the breakdown. In addition to the name of the item, options exist to [View Attachments] associated with a map item,
[Display the Radial] of the map item, and [Pan To] the map item.

At the bottom of the chat area are pre-defined messages that may be used to quickly
create a message to send. Select the current menu button to scroll through the eight dif-
ferent menus of pre-defined messages, including: DFLT1, DFLT2, ASLT1, ASLT2, JM1, JM2,
RECON1 and RECON2.

These pre-defined messages present an easy way to transmit a brief message to other
network members concerning position or other important communication. The messages
may be changed by long pressing on the button and changing its label and correspond-
ing text.
38
Unclassified
GeoChat Messaging (Continued)
At the bottom of the chat area are pre-defined messages that may be used to quickly create a message to send. Select the cur-
rent menu button to scroll through the eight different menus of pre-defined messages, including: DFLT1, DFLT2, ASLT1, ASLT2,
JM1, JM2, RECON1 and RECON2.

These pre-defined messages present an easy way to transmit a brief mes-

sage to other network members concerning position or other important
communication. The messages may be changed by long pressing on the
button and changing its label and corresponding text.

Selecting the [Pan To] icon, located at the top right of the call sign in an individual chat, will pan the map interface to that user’s location.

A numbered red dot will appear on the [Contacts] icon when a message has been received suc-
cessfully. The number denotes the number of unread messages that have been received. Select this
icon to view the contact list. The username who sent the message will appear with a numbered red
dot next to their name. Alternatively, the text of the message can be read by dragging down from
the top to open the Android notifications drawer. This notification will only stay available for a short
time.

When sending a chat message to a user, a “read” indicator will appear next to the sent message. When the indicator is filled (white back-
ground, dark checkmark), it indicates the recipient has read the message. When the indicator is an unfilled (dark background, white
checkmark), it indicates the message has been delivered but the recipient has not opened their chat window to view it.

Newer TAK Servers can hold messages sent to disconnected users and deliver the messages the next time the offline user reconnects to
the server.

Chat
The Chat tool logs, organizes and displays the most recent chat message that was sent from each chatroom asso-
ciated with the local device.

Each entry in the Chat tool will display who the message exchange is with, what the last message said, and when
the last message was sent. The list of entries is ordered by timestamp with the most recent appearing at the top.
Select a chat message entry to open the chatroom associated with the message. Select [Search] to input text to
search for a specific message or sender. Select [+] to open the Contacts tool. Messages that haven’t been read yet
will display a red indicator, like the Contacts tool.
39
Unclassified

Encrypted Mesh Communications

Enhanced security for all communications can be configured on a mesh network in ATAK. An AES-256 en-
cryption key is generated on one device and is then shared with the other devices that require encrypted
communications. Once enabled, encrypted devices can securely communicate with one another and ex-
change SA, Chat, Data Packages, etc. Encrypted devices cannot communicate on the mesh network with
non-encrypted devices and vice versa. This feature provides an additional level of security for advanced users.

To configure encryption, navigate to Settings > Network Preferences > Network Connection Preferences > Configure AES-256 Mesh Encryption.

Select the [Generate Key] button to create an encryption key, then enter the desired file name and select [OK].
The encryption key is saved in the atak/config/prefs folder and can be added to a Data Package to be shared with
other users (prior to enabling encryption on the device) or can be preloaded onto the devices. At the time the key
is generated, the user has the option to load the key immediately.

To load an encryption key, select the [Load Key] button and navigate to the location of the key file. Select the
[Forget Key] button to remove the key and revert to unencrypted traffic.

40
Unclassified

Video Player
Select the [Video Player] icon to open the Video player. The Video Player supports playing video streams from IP cameras, Rover5 and H.264
encoders. The menu allows the user to add, edit, delete, play or send videos to other network members.

Options for the video player include view video snapshots, add new video alias, download
an alias from the TAK Server, multi-select option to either export or delete aliases or search
for a specific alias.

Select the desired listed video alias or file name to begin playing the stored or streaming
video. The video will display half the width of the screen.

To view a video at full screen, slide the pull bar. To return to half screen, press the de-
vice’s [Back] button. Select the [Back] button to return to the list of available videos.

To add a stored video file, select the [Import Manager] icon, select [Local SD], and navigate to the video file and select [OK] to add the video to the list of
available videos. The user can also manually place video files in atak\tools\videos\ to be listed after ATAK is restarted. When a video is playing at half width,
slide the pull bar to the right to hide the video but maintain the connection. Slide the pull bar to the left to unhide the video. The status of the video player
is reflected in the main Android toolbar located at the top of the screen.

Select the [Snapshot] icon to save the current frame of the video as a JPEG image file, the icon will flash green
to indicate that the snapshot has occurred. The file will be saved in \atak\tools\videosnaps.

Saved snap shots can be viewed by selecting the [Video Snapshots] icon. Images can be sorted by time
taken or by the name of the snapshot and searched for by their name. By selecting an image, the image will
be displayed within the window.

The user will have the options of cycling though the images, [Send] to a TAK user, or edit in [Image Markup]. (Image
Markup must be installed.)

If a live UDP or appropriately formatted RTSP stream is being viewed, it can be recorded by selecting the [Record] icon. The icon will change
to a green square while recording. Select the [Green Square] to end the recording. Select [Auto Record] to automatically start recording
every time this video stream is opened. The Video Recording button will be hidden once activated. Stopping the recording will deactivate
Auto Record. The recordings are saved in \atak\tools\videos\. Note: This is only available for UDP streams.

To close the video player, select the [X] located at the bottom right corner of the video player or select the [Back] button.

41
Unclassified
Adding a Video Stream
To add a video alias, select [+] at the top of the Video Player screen.

Enter the necessary information for the selected stream type: Stream Type (UDP, RTSP, RTMP, RTMPS, TCP,
RTP, HTTP, HTTPS, RAW, SRT) along with the necessary streaming information including, IP address (leave
IP address blank to listen on the local IP), Port Number, Alias Name, Network Timeout, Buffering and Buffer
Time. Selecting buffering along with a buffer time will provide a small amount of buffering of input video
flow to help smooth video streams. Adding buffering will increase latency. When the necessary informa-
tion is entered, select [Add].

A video alias can also be added to a [Sensor Point] from the [Mission Specific] icon pallet within the
Point Dropper Tool. After the user adds the URL and FOV to the details window of the Sensor Point,
the video can be viewed. This Sensor Point can be sent to other users when provided with the URL
and FOV.

Downloading a Video Stream

To download a video alias from a TAK Server, select the [Download] icon at the top of the Video Player screen, then select the TAK Server. A list
of available Video aliases will be presented. Select the desired video aliasthen select [OK]. The selected video will then be added to the list of
videos.

Search for Video

To find a particular video alias from the list of available videos, select the [Search] icon at the top of the Video Player screen, then enter the name
of the desired video.

42
Unclassified
Individual Video Options
To view additional options for individual videos, select the [Additional Options] icon. The options include:
sending the video alias to other contacts, editing the alias or deleting the alias.

The [Send] button will prompt the user to choose to send to Contacts or a TAK Server. If Contacts is selected, choose one or more contacts, then tap [Send].
Selecting [Broadcast] will send to all contacts.

To edit an existing Video Alias, select the [Edit] icon to access the same options as shown for the Add Video Alias option. During editing, the video alias can
be renamed or redirected to a new address and port combination.

To delete an existing video, select the [Delete] icon, then confirm the deletion.
Viewing KLV
If a video includes associated metadata, an option will be available to view a represen-
tative SPI or CoT Marker. These markers indicate the map location of the sensor at the
corresponding time viewed within the video player.

The SPI marker will indicate the center of view corresponding to that sensor as the video
plays. The user may zoom to the SPI or CoT Marker by selecting the [Zoom To] icon on
the video controls, or may lock to an SPI by selecting the SPI on the map and selecting the
[Lock] icon on the radial.

Note: This functionality is only available for live streams in UDP format if the KLV data is
available as well.

Live Video Map Display

A video (video stream) with metadata for the four corners of the video can be
viewed in the map interface. To start, by open the video and select the [Globe]
icon in the upper right-hand corner of the video window, turning the globe green.
When the window is minimized, the video can be viewed on the map interface.
The video will overlay upon any current imagery displayed.

43
Unclassified

Go To
Select the [Go To] icon to enter coordinates and navigate to a specific location on the map.

Select from the [MGRS] (military grid reference system), [DD] (decimal degrees), [DM] (degrees - minutes),
[DMS] (degrees-minutes-seconds), [UTM] (Universal Transverse Mercator) or [ADDR] (address) tabs on the
Go To interface and enter the location data of interest. Select the [Cycle] button when using either the
MGRS or UTM entry methods to reformat the text fields. The first cycle mode will combine the Easting/
Northing into one field with the following cycle mode combining the entire coordinate entry into one large
field.

The coordinate entry tabs can be reordered by long pressing and dragging the coordinate entry tab to the
new desired location in GoTo.

Enter the Latitude, Longitude and Elevation in the space provided for MGRS, DD, DM or DMS searches. If DTED is installed, the elevation value can be auto-
matically populated by tapping the [Pull From DTED] button. Select a desired marker type (spot, unknown, neutral, red, friendly, Red X or DP) to be placed
at the location of the entered coordinates. If [No Point] is selected, the map will pan to the location but will not add a point.

An address can be entered to drop a marker or pan the map to the desired location. After en-
tering an address, select [Find]. This will populate the [Add Address] box in the Go To window.
Check the Set the Address as the Title box to place the address on the map as a label. If a marker
is selected, the address will be the marker’s label. If no marker is selected, the address will be
placed alone on the map as a label.

Additional address providers can be configured by placing an XML file with the provider information into atak\tools\address. The address lookup provider
used for the ADDR tab can be configured in the Settings > Tool Preferences > Specific Tool Preferences > Address Lookup Preferences. The chosen address
provider will be displayed in the Go To window on the [ADDR] tab.

44
Unclassified

Drawing Tools
Drawing Tools provides the ability to create different shapes and/or telestrate on the map.

The Delete, Fine Adjust, R&B Line and Details radial options be-
have in the same manner as other map objects.

The Labels option toggles on/off a label associated with the

shape displaying the shape’s dimensions or name. The Free Ro-
tate / 3D View (eye icon) radial option allows map rotation and
to view in 3D mode. A yellow eye will appear in the upper left
corner and as the map is rotated, the degrees of rotation are
displayed and updated. Tapping the yellow eye again will turn
the feature off.

The Geo Fence Tool creates a virtual fence that triggers entry/exit notifications based on its assigned
parameters. The Edit option can be used to re-adjust and make additional changes to the shape, as
needed. In addition to the standard configuration options that are present in the Details window,
the area of the shape is calculated and displayed here as well.

Create a Shape

To add a Circle, select the [Circle] icon, select a location to place the cen-
ter point and tap another location for the radius. Select the circle and
select [Details] on the radial menu to change the name, radius, number
of rings, color, opacity, line thickness, line style add a remark, add an at-
tachment or to send/broadcast the circle information to others.

All dimensions (radius, area, circumference and height) can be manually adjusted in
the Details allowing for precise shape placement on the map. Label visibility and cen-
ter point visibility can also be controlled from the Details. Selecting any point of the
circle on the map, will open the circle radial menu.

To edit the circle, select [Edit] from the Details window. Long press the center point to move the circle or long press the edge to resize. Select [Undo] to
reverse changes or select [End Editing] to save the changes.
45
Unclassified
Create a Shape (Continued)
To add an Ellipse, select the [Ellipse] icon, select a location to place the first cor-
ner, select another location for the second corner which sets the edge, and finally
select a third location to establish depth. Select the ellipse and select [Details] on
the radial menu to change the name, display the label or center point, color, opac-
ity, line thickness, line style, add a remark, add an attachment or to send/broadcast the circle
information to others.

All dimensions (width, length, heading, area, circumference and height) can be manually ad-
justed in Details, allowing for precise shape placement on the map. Label visibility and center
point visibility can also be controlled from the Details. To edit the ellipse, select [Edit] from the
Details window. Drag or long press the markers to edit the ellipse on the map. Select [Undo] to
reverse changes or select [End Editing] to save the changes.

To add a Rectangle, select the [Rectangle] icon, select a

location to place the first corner, select another location
to add a parallel corner and then select a third location to
indicate the desired depth of the rectangle.

Select the rectangle on the map and select [Details] on the radial menu
to change the name, color, opacity, line thickness, line style, show la-
bels, show center point, show tactical overlays, add a remark or send/
broadcast the rectangle information to others. All dimensions (width, length, area, perimeter
and height) can be manually adjusted in the Details allowing for precise shape placement on
the map. Label visibility and center point visibility can also be controlled from the Details.

Selecting the Tactical Overlay option will allow the user to add tactical color coding to a struc-
ture being outlined, establishing a common set of terms for operational coordination. The
white side of the rectangle represents the front, while black represents the back of a structure.
The green side of the structure appears clockwise from the front (white), while the red side ap-
pears counterclockwise. The first point during placement should be the left front corner of the
structure (white/green corner), while the second point should be the right front corner of the
structure (white/red corner) and the third point should be the back. Create the rectangle and
when the Details menu is displayed, select the [Tactical Overlay] checkbox to turn on the color coding.

Selecting any point of the rectangle on the map will open the rectangle radial. Note that Fine Adjust is not active for this shape. To edit the rectangle, select
the [Edit] icon. Drag a corner or side of the rectangle, or long press a mid-point or vertex, to move the selected side. The rectangle can be rotated if one of
the four mid-points is held and dragged. Select [Undo] to reverse changes or select [End Editing] to save the changes.
46
Unclassified

Create a Shape (Continued)

To add a Free Form shape, (i.e., a polyline or polygon) select the [Free Form] icon
and then select a location to place the first vertex for the shape; continue to tap
to add vertices. Select the initial vertex to close the shape or select [End Shape]
to form an open shape. Select the [Undo] button to remove the links in sequence.

Select the free form on the map and select [Details] on the radial menu to change the name
of the shape, coordinate center point, coordinate units, color, opacity, line thickness, line style,
add height, add a remark or send/broadcast the shape information to others.

Checking the [Show Labels] box will display the name of the shape on the perimeter. Check-
ing the [Center] box will unhide/hide the center point and center point label. Checking the
[Closed] box will display a closed shape versus an open shape on the map. An open shape’s
center point cannot be changed. On a free form line, the Details pane displays the start point
and end point of the line. Start Point and End Points can be precisely adjusted from the De-
tails pane.

Selecting the shape on the map will open the free form radial. Note that Fine Adjust is not
active for this shape. To edit the shape, select the [Edit] icon on the radial. Drag a vertex of
the shape or long press a line to add a vertex. Select [Undo] to reverse changes or select [End
Editing] to save the changes.

To place a shape with 2525 Mil Symbology, select the Mil Sym tool (3 dots icon), then select a
symbol type from the menu.

Depending on the specific symbol type selected, the procedure for placing a Mil Sym shape will be the
same as for an ordinary Drawing Tools shape (e.g., free form shape, rectangle, or circle etc.). The shape will
draw on the map according to the selected Mil Sym type instead of as an ordinary free form shape. The Mil
Sym type is listed in the shape’s Details panel, where it can also be changed or cleared.

47
Unclassified

Telestrate
Select the [Telestrate] icon to access the Telestrate toolbar. Selecting the [Te-
lestrate] icon enables and disables map scrolling by turning telestration on or
off. When Telestrate is toggled on, the user is able to free form draw manually or
with a stylus.

Select [Undo] to remove the most recent activity. Selecting

[End], ends the current telestration session saving all activi-
ty as a single multi-polyline and returns the user to the main
Drawing Tools menu. Selecting a telestration on the map will
open the radial menu. Select [Details] on the radial menu to
change the name, add a height, change line colors, delete
lines or add lines, adjust line thickness, select line style, add
remarks or send/broadcast to others.

Selecting the [Color Selection] icon will open the Choose Telestration Color menu. Choose a provided color or select
[Custom] to customize a color.

Minimum Safe Distance (MSD)

Select the [Minimum Safe Distance] (MSD) radial option to create a zone around a shape
that has been previously placed on the map.

Use the Range field to specify the distance from the shape’s border that the
zone will be created from. MSD color can be adjusted by selecting the color
swatch and the visibility for the zone can be enabled by checking the [En-
abled] checkbox.

MSDs can also be created and saved to the Favorites section by selecting [+].
These favorites are shared between all shape types that support this feature.
Select an MSD from the Favorites section to quickly enable it.
3D Shapes

All shape types with height can be rendered as 3-dimensional objects when the map is in 3D Mode.

48
Unclassified

Geofencing
The Geo Fence Tool allows users to create a virtual fence that triggers entry/exit notifications if map items of interest cross the virtual boundary
lines. Geo Fence options are added to the existing drawing tools. After a Geo Fence has been added to a shape, it can be accessed by selecting
the [Geo Fence] icon from the additional tools menu or by selecting it from the shape’s radial. The Geo Fence radial option will be highlighted
when a Geo Fence has been added to a shape.

The Enabled field slider will move to Tracking by default

when a new Geo Fence is created. Toggle the slider be-
tween Tracking and Off to enable/disable the Geo Fence.
Use the Trigger field to define which types of Geo Fence
breach to monitor. Choose between Entry, Exit or Both. Use
the Monitor field to define which entities the Geo Fence
will track.

Choose between TAK Users, Friendly, Hostile, Custom or All. Elevation boundaries for the entities being tracked can be defined
by setting Min and Max elevation values. Select the [OK] button to finish creating the Geo Fence. Select the [Send] button to
create the fence and send it to another user. Select [Delete] to close the Create Geo Fence window and discard changes.

Geo Fence breaches will trigger an alert in the lower left corner of the map and will also be listed in the Overlay Manager.

49
Unclassified

Lasso Tool
The Lasso Tool allows users to quickly select items from the map to be exported and shared with other users, or to be deleted from their system.
The Lasso Tool is located in the additional tools window.

When the tool is launched, onscreen directions are displayed in green, providing instructions how
to use the tool.

Draw a circle around the area of interest to display a list of all the map items in the area. The user
may deselect items if needed.

Select the [External Native Data] box to include the un-

derlying map data in the export. Tap [Select] when all in-
dividual items have been chosen.

The Select Lasso Action interface provides the option to either [Export] the items or [Delete]
these items.

Selecting [Export] displays the Select Export Format screen. The available formats are Attach-
ments, Data Package, GPX, KML, KMZ, Shapefile or Video. The format is selected based on the
data included.

Select [Delete] and verify by selecting [OK] on the confirmation screen. This will remove the selected items
from the map.

50
Unclassified

Quick Pic
Select the [Quick Pic] icon to access the Android device’s camera or another camera application.

After taking a picture, it can be discarded by selecting [Retry] or saved by selecting [OK] or [Done]. Saving the picture re-
turns to the map view and places a camera marker at the Self-Marker’s location. The image taken is attached to the marker.
The image can be sent to other TAK users on the same server, marked-up (if the Image Markup application has been in-
stalled and loaded), have overlay metadata added to the image (if the TAK GeoCam application is installed and loaded) or
panned-to the Quick Pic marker on the map.

Select the Quick Pic marker to activate its radial. Long press to
access the sub-radial menu to quickly send the marker. Select
[Image View] to view the image along with the marker and the
approximate field of view of the still image. The image can also
be accessed by selecting [Details], the [Attachment] (paper-
clip) icon and then selecting the image thumbnail.

Gallery

The integrated Gallery Tool can be used to view media attachments. The
attachment image’s file name and the associated map item will be dis-
played. Captions can be added to the image file by opening the specific
image in the gallery and tapping the line at the top of the image.

51
Unclassified

Track History
The device’s GPS can be used to track movements with the Track History tool. These tracked paths can be exported to a
TAK server, to a route or to a KML, KMZ, GPX or CSV file. A GPS position must be established before tracking can begin.

Tracks can also be recorded for other users/markers by selecting the breadcrumb option from the marker’s radial.

Selecting the [Track History] icon will open Track Details for the current active track. The track title, color and style can be mod-
ified.

Initiate a new track by selecting the [Add Track] icon. Accept or edit the default track name and
select the [OK] button to begin the new track. User location data is recorded as breadcrumbs in
a new track file.

Track Search

Use the Track Search function to view track information that has been previously saved locally or on a TAK Server. The tool searches the track
database for matches against the specified time range and by user callsign. Matching tracks are displayed as a list, and can be selected to view
on the map interface.

Select the [Track Search] icon to access the function. Specify callsign
and time frame, check the box for Server Search (if desired), then select
[Search]. The track list will appear. The query results can be sorted by
Track Name or Start Time. Select any of the query results to move to
that track. Once selected, the name, color and style of a selected track
can be modified or the track can be cleared. Convert a track to a TAK
route, published to a server or export it as a KML, KMZ, GPX or CSV file
by selecting the desired track and then [Export]. Enter a file name then
select [Next] and choose the export format. Select [Done] or [Send]
when the export completes.

When viewing the track list, the Track History Toolbar will appear at the top of the Track history pane. The options include [Add
a Track], [Multi-select], [Track Search] and [Clear Tracks]. The Track History List allows the user to select tracks of other users
that have been saved on their device. The Track Search – Local Device allows the ability to perform a tailored search for tracks
meeting specific criteria. Use the searching option to retrieve all the tracks on the device. The Track History Breadcrumb and
Settings can be configured in the Settings > Tools Preferences > Specific Tool Preferences > Track History Preferences.

52
Unclassified

Digital Pointer Tools

Select the [Digital Pointer] icon to begin using the Digital Pointer Tools feature. When the icon is selected, the available tools appear in the
toolbar. The Digital Pointer Tools capability primarily allows the user to share pointers with team members. Additionally, GoTo MGRS is available
for use.

The Pointer button allows the user to place an indicator on the map. If other team members are on the same network, the pointer icon will au-
tomatically be sent to them as a notification message. The pointer icon auto sends to all other users’ maps with a line to the user’s marker that
set the pointer.

Selecting the user’s own pointer opens a radial menu.

Selecting another user’s pointer opens a radial menu with additional options.

Select the [GoTo MGRS] icon from the Digital Pointer toolbar to manually enter desired MGRS coordinates to place a local Pointer. This allows
for fast entry of the 10-digit Easting and Northing and includes the corresponding grid zone for that map view.

Digital Pointer Tools settings can be customized in Settings > Tool Preferences > Specific Tool Preferences > Digital Pointer Toolbar Preferences.

The legacy toolbar mode can be enabled in preferences. Legacy mode will add the Dynamic R&B Line option and provide the option to configure between
1-3 DPs on the Digital Pointer toolbar.

53
Unclassified

Elevation Tools
Select the [Elevation Tools] icon to open Elevation Tools which include
Heatmap, Viewshed and Contour Lines functionality.

The Heatmap Tool displays elevation data on a color scale with lower elevations
represented by blue and higher elevations by red. The Intensity, Saturation, Value
and Sample Rate of Resolution can be modified for user preference. Elevation Data
(such as DTED, SRTM, Quantized Mesh or other forms) is needed for this tool to work
properly.

Terrain Slope can be viewed by selecting the [Heatmap] box and changing the selection to Terrain
Slope. The slope of the elevation data is a color scale with smaller slopes depicted as yellow and high-
er slope values as black. The intensity can be modified by the user.

Viewshed
The Viewshed tool determines the visibility from a selected map location. From the Viewshed tab,
select the [Eye View] icon and then tap a location on the map or select a map marker. An Eye marker
will appear on the map interface.

Note: If zoomed out too far, only the Eye View icon will be visible. Zoom in to see the viewshed.

Note: Viewsheds and Contour lines do not persist upon ATAK quit/restart.

A circle with the specified radius will display with the viewshed marker as the center. Green parts of the circle represent areas
visible from that location and red parts represent areas that are obstructed from view. The Height Above Marker can be altered
to reflect how far above ground level the viewshed should calculate. The radius of the viewshed can also be modified.

The elevation data source can be selected by toggling the Source button. Terrain and Surface are supported sources. If [Adjust
Together] is unchecked, The intensity of the visible and obscured areas can be adjusted separately using the seen/unseen
sliders.

54
Unclassified

Viewshed (continued)

Intensity can be increased or decreased by using the slide bar or entering a numeric value. Select [Remove Viewshed] to delete the viewshed from the
map.

Tap [Select Viewshed] to show a list of all created viewsheds. Select an individual viewshed name to pan to it on the map. Select
the [i] icon (Details) to view or modify the current viewshed parameters. Viewsheds can also be removed through the multi-select
tool.

The viewshed radial will open by selecting the [Eye View] icon.

Settings for Elevation Tools can be changed by navigating to Settings > Tool Preferences > Specific Tool Preferences > Elevation
Overlay Preferences.

Contour Lines

The Contour Lines Tool generates contour lines on the map in the area within the
current window.

To generate contour lines, select the [Contour] tab within the Elevation Tools
screen. The [Generate] button becomes active when the map is zoomed to the
correct scale (Scale varies based on screen resolution). Modify fields as desired and
then select the [Generate] button. A progress bar and the percentage complete
will appear to give feedback on the contour line generation.

Major Lines and Minor Lines can be toggled on or off without having to regenerate
the contour lines. Line color, Units (meters or feet) and Major Line Width can be
changed without regenerating the contour lines. If the Interval is modified, select
the [Generate] button to regenerate the contour lines with the new value.

55
Unclassified

Resection Tool
The Resection Tool provides a capability for users without a GPS signal to estimate their location from known points/
landmarks on the map. Two or more reference points on the map are needed to provide a more accurate estimate of the
user’s location.

From their position, the user identifies and places a series of landmark points on the map. As each landmark point is
placed via the point dropper icon, a compass is displayed allowing the user to adjust the bearing from their position to
the landmark.

After a landmark point has been placed, the location and bearing can be modified by tapping the corresponding field for that landmark entry on the Resec-
tion panel. When two or more landmark points have been placed, an intersection point is computed and displayed in the intersection field.

Select the [Plot Intersection] icon to place a marker on the map at the current intersection point.
If additional landmark points are added, the intersection field will be updated and the [Plot Inter-
section] icon can be selected again to place a more up to date intersection point marker on the
map. The marker will be labeled with the callsign of the device.

To move a landmark point, long press the point on the map and then select another location for
the point. To remove an individual landmark point, select the landmark point on the map to bring
up the radial and select the [Delete] radial option. Other landmark point radial options include:
Bearing, Fine Adjust, R&B Line and Details. To delete all landmark points that have been placed on
the map, select the [Clear Landmarks] icon and confirm the deletion of all landmark points.

When finished estimating a new location, select the [Back] button to exit the tool. A dialog will appear with the option
to update the Self-Marker location. Select [Yes] to update the Self-Marker to the new resection estimate and have that
location broadcast in a SA message to other users on the network. Select [No] to not update the Self-Marker location.

56
Unclassified

Import Tool
Select the [Import] icon to import supported files into the TAK application from an SD card or via the network.

From the Select Import Type interface window the following can be selected: [Local SD], [Gallery], [KML Link], [HTTP URL] or choose a different
application.

Select [LOCAL SD] to import from a folder residing on the internal or external SD card. Navigate to the folder from
where files are to be imported. Various types of files can be imported via Import Manager including: ATAK configu-
ration, ATAK Data package zip files, Elevation Data (such as DTED, SRTM, Quantized Mesh or other forms), imagery
and overlay files.

Imagery file types that are supported include XML, SQLite, GeoPackage with imagery, CADRG, CIB, ECRG, GeoTiff,
JPG2000, KMZ with imagery, MrSid, NTIF and PFPS. Overlay file types that are supported include DRW, GPX, KML,
KMZ, LPT and Shape. Depending on file type, most imported files will be accessible via Maps and Favorites, Over-
lays or Data Package.

Some file extensions, like ZIP or GPX files for example, may result in a prompt for the user to select which import
method to use.

Select [KML Link] to import a KML file via the network using HTTP or tap [HTTP URL] to import other file types via the
network using HTTP. Enter a name for the link, a valid HTTP URL and a refresh interval (KML link only). Finally, indicate
whether the local content should be removed when ATAK is shut down. Select [Add] to save the link.

Once the KML Link or Remote File Resource has been added, it will be listed in the Remote Resources category in
Overlay Manager. The red status indicator appears next to files that are available for download but have yet to be add-
ed. Selecting the [Download] icon initiates the download process after the user verifies the activity. The green status
indicator lists files that have been successfully downloaded.

57
Unclassified

Rubber Sheet
The Rubber Sheet Tool allows the ability to add georeferencing to a 2D image or a non-rectified 3D model, as well as edit a 2D image overlay or
3D model that is already georeferenced. Select the [Rubber Sheet] icon to open the toolbar.

Options available on the toolbar are: Import, Sort, Export and Search. Imported Rubber Sheets can be sorted in either alphabeti-
cal order or by distance from the Self-Marker.

Working with 2D Imagery

To import a 2D image, pan and zoom the map to the desired location for the imagery. Select the [+] icon, select the
desired image file to import, then select [OK]. The image will be displayed on the current map view and listed in the
Rubber Sheets section of Overlay Manager.

After the image has been imported, selecting it will open the radial menu. Imported Rubber Sheets can be sorted in
either alphabetical order or by distance from the Self-Marker.

Select [Edit] to adjust the size, rotation, and location of the imagery. The controls are the same as for editing Drawing
Tools rectangles. Drag a corner to change the rectangle size, drag the midpoint of an edge to change size and rotation,
and drag the center to move the entire rectangle. Select [Rotate] to use two fingers to rotate the rectangle without
changing its size. When the image has been adjusted to the desired position on the map, select [End Editing].

Select [Export] from the Rubber Sheets’ Details, or Rubber Sheet category in Overlay Manager to export the rubber sheet image as a KMZ file.
The exported result is placed in the atak/tools/rubbersheet folder. For convenience, a prompt will appear to import the exported result as an
image overlay.

58
Unclassified
Working with 3D Imagery
To import a 3D model, pan and zoom the map to the desired location for the model, unless the model is georeferenced.
Select the [+] icon and navigate to the file location of the desired 3D model then select [OK].

If the model is not geo-rectified, projection options are presented. Choose between ENU (East North Up), with the option
to Flip Y/Z, or LLA (Lat, Lon, Alt), then select [Import].

Once the model has been imported and placed on the map,
the user can select the model to open the radial. To edit the
model, select the [Edit] icon from the radial.

Once in edit mode, the model can be dragged on the map,

rotated and/or raised or lowered.

After the model has been positioned as desired, select [End Editing]. To export it to a
georeferenced OBJ 3D model, select Overlay Manager > Rubber Sheets, then select the
[Export] icon. The file is placed in the /atak/export folder.

When the export has finished, select whether to import the finished product into ATAK.
If the model is imported, it will be placed on the map and will be listed in the Overlay
Manager under 3D Models.

59
Unclassified

Alert
Select the [Alert] icon to open the Alert Tool in ATAK. The Alert Tool provides the capability of indicating the need for
assistance, the type of emergency and its location on the map. The type of emergency can be selected from the drop-
down menu, before activation, and includes options for a 911 Alert, Ring the Bell, Geo Fence Breached or In Contact.

Once the emergency type has been selected and both switches have been enabled, the TAK
Server broadcasts the announcement to all network contacts. Even if the device is turned off,
the beacon will continue to broadcast. The beacon can be canceled and removed from the map
by returning to the Alert tool and toggling the switches off. If the SMS for Emergency option has
been configured, the alert will be sent via text message to the configured numbers.

60
Unclassified

TAK Package Management

The primary user interface for managing products and product repositories in ATAK is the TAK Package Management Tool. This tool streamlines
the process of obtaining plug-ins and provides a single location to manage TAK products available across all supported TAK product reposito-
ries. To install tools or plug-ins into Android OS and load them, select the [Plugins] icon from the additional tools and plug-ins menu. Actions
available from here include viewing the status, availability, and details of all available products. Products can also be installed, updated or
uninstalled from this menu.

Select [Search] (magnifying glass) to enable a text search field that can alo filter by status and origin.

Upon opening ATAK or after a product repository sync is completed, if any current products have available updates (e.g.,
a new version of an application or plug-in), a prompt will appear to open the TAK Package Management view for updates.
Note that compatible products may still function when not up to date; however, incompatible products will not be loaded
until they are updated.

The lists of plug-ins will have a red or green shield associated with
it. A green shield signifies an officially signed plug-in or application.
A red shield signifies that the plug-in or application is not officially
signed.

To enable or disable auto synchronization of the device with all configured product repositories, select the [Menu] icon
(three vertical dots) from the TAK Package Management screen then select [Edit] and check the [Auto Sync] box.

Note: The three vertical dots and edit are replaced with a [Settings] (gear) icon on a tablet device.

If Auto Sync is enabled, the sync occurs each time ATAK is started. If a newly installed plug-in is not on the list, select the
[Sync] icon to update the local list.

Note: The status of installed but inactive plug-ins will appear as STATUS: Not Loaded.

61
Unclassified

TAK Package Management (Continued)

Over the Air Update Server product repository is disabled by default but may be enabled to (1) view status of
remote repository (status of last sync attempt), (2) view time of last successful sync with the remote reposi-
tory and/or (3) switch to a custom or private remote repository (change the URL).

To enable Over the Air Server product repository, open TAK Package Management > select the vertical dots
> select [Edit], then check the box for [Update Server]. [Update Server URL] becomes available (empty by
default). Select to enter the URL for the desired repository server and select [OK]. Return to the TAK Package
Management screen and press [Sync] to populate server and local plug-ins. The server status information
will appear near the top of the screen.

ATAK automatically syncs with the configured product repositories the first time it runs after being upgraded to
a new version. This allows ATAK to check for available updates and incompatible plug-ins. If a repository sync is
manually initiated by the user, a sync operation will display a progress dialog. Auto sync operations which occur
during startup do not display a progress dialog, minimizing interference of the user working in other tools.

62
Unclassified

Toolbar Manager
The ATAK toolbar is customizable allowing for multiple layouts to be available to quick-
ly switch to or edit. The default toolbar contains five tools, a sixth tool can be added on
a smartphone device with up to ten tools supported on a tablet device.

Select the [Additional Tools] button, beside the toolbar, to access

the other available tools which are displayed in a grid format by de-
fault.

To change the tools layout to list format, select the [List

View] button.

Selecting [Grid View] will return the layout to the grid format.

Modifying a Toolbar

Select [Edit Toolbar] to launch the toolbar Edit Mode. Any user-created toolbar may
be modified by selecting [Edit Toolbar] at any time.

Note: When entering Edit Mode through the icon on the toolbar, the current toolbar will be pre-
sented to modify. If this is the default toolbar, a copy of it will be used as the starting point for the
new toolbar since the default toolbar cannot be modified. To start with a “clean” toolbar, go to the
toolbars list and choose to [Add Toolbar] instead.

The following actions can be done when in Create/Edit Mode:

• Name/rename the toolbar
• Add and/or remove a tool on the toolbar
• Change the visibility of a tool in the listing

63
Unclassified

Modifying a Toolbar (Continued)

To add a tool to the toolbar, long-press and drag the icon

into the position desired.

If an icon is already in the space, dragging the new tool

into the space will replace it. Long-press and drag a tool
from the toolbar to the delete area on the map to delete it
from the toolbar and return it to the main tool list.

The are several icons that appear on the tools when in Edit Mode that provide the ability to manage the tool icons both within the tool list and on the main
toolbar.

The visibility icon indicates that a tool is displayed in the main toolbar list after the editing panel is closed. Select this icon to remove it from the
tool list. It may be made visible again when in Edit Mode.

The visibility icon with a slash through it indicates that the tool will not be visible at all after closing Edit Mode. Select it to return the tool icon
to the tool list.

The Delete icon gives the user another way to remove a tool from the main toolbar. Select it and the tool will be removed from the toolbar and
moved back to the tool list. An icon with the trashcan also indicates that the tool will be visible on the toolbar but not visible in the list when
Edit Mode is closed.

After completing all desired modifications to the toolbar, select [Save]. The toolbar will appear in ATAK’s available list of toolbars.

Export Custom Toolbar

To save a toolbar outside of ATAK, select [Export Toolbar]. The exported file will be saved to /sdcard/atak/export/. After exporting, the toolbar
can be sent to another TAK user. The toolbar will also be saved to the toolbar list.

Note: A toolbar can also be imported using ATAK Import Manager or selecting the [Import Toolbar] button in the Toolbar Manager panel.

64
Unclassified

Toolbar Management

Select the [Toolbar Manager] button to see a list of all the currently available toolbars.

Select [Add Toolbar] at the top to enter Edit Mode with a new “clean” toolbar. No tools are initially present on
the toolbar when a new toolbar is created through Toolbar Manager. Toolbar creation uses the same actions
as when modifying an existing toolbar. These are described in the Modifying a Toolbar section. Select [Save]
after the edits are complete and the new toolbar will appear in the toolbar list.

Select [Import Toolbar] to import a previously saved toolbar from the Android file system.

Note: Another TAK user can also send a toolbar in a Data Package that will be auto-imported into the receiv-
er’s toolbar list.

Toolbar selection is also done in the Toolbar Manager. Select the radio toggle button to choose which toolbar to use.
Toolbars may be edited by selecting [Edit] on the line with its name. Remove a toolbar by selecting [Delete].

A legacy toolbar option is available as well. The legacy tool bar can be selected during TAK device setup by selecting [Action Bar Experience] and then the
[Right Side (Legacy)] option. The option to switch to the legacy toolbar can be accessed after device setup by navigating to Additional Tools and Plugins
> Settings > Support > TAK Initial Device Configurations.

65
Unclassified

Clear Content
Select the [Clear Content] icon to remove all ATAK content from the Android device. Note
that this action will permanently erase all content.

Select the [Clear maps & imagery] checkbox to clear map and imagery data as well.

Lock both switches by swiping them to the right to activate the

[Clear Now] button then tap [Clear Now]. ATAK will exit after
this action has been completed.

Select specific items to delete by tapping the [Select Items] but-

ton. This will navigate to the Overlay Manager multi-select tool
to choose specific items to delete. Select [Cancel] to return to
the main interface.

During the deletion process the file data is corrupted, making file recovery nearly impossible.

66
Unclassified

Installing a Plug-in
Plug-ins must be installed and then loaded to function in ATAK.

Manual Install

If an update server is not available, a manual install can be done. Acquire the plug-in .apk file, place it on the local device, browse to it, then select the apk to
launch it. Android will prompt for permission to install. Allow the installation to run until notified that it is complete.

Launch ATAK and open the TAK Package Management screen by selecting [Plugins] from the Additional Tools menu
or by navigating to Settings > Tool Preferences > Package Management.

A list of currently installed plug-ins will be displayed. Also included in the list are available stand-alone
applications.

If the newly installed plug-in is not on the list, select the [Sync] icon to update the local list.

The status of installed but inactive plug-ins will appear with a status of Not Loaded. Select the checkbox ,
then [Load] for the new plug-in to be loaded. The plug-in can be unloaded by unchecking the box. When
the plug-in has a status of Loaded, it is ready for use. The status of an installed plug-in that is no longer
compatible with ATAK will appear with a status of Incompatible.

The lists of plug-ins and applications will also have a red or green shield associated with it. A green shield
signifies an officially signed plug-in or application. A red shield signifies that the plug-in or application is
not officially signed. If an updated plug-in is not available, the plug-in should be uninstalled. To uninstall
the plug-in, select the [Trashcan] icon.

The [Information] icon provides additional information about the plug-in.

67
Unclassified

Manual Install (Continued)

To install a stand-alone application that has a status of Not Installed, select the application entry
from the list. Once the selected application dialog appears, select the [Install] option. Once in-
stalled, the application is loaded.

The application can also be upgraded to a newer existing version if the status is Update Available. Select the application
entry in the list and once the application dialog appears, select the [Update] option. The application can also be unin-
stalled from this dialog by selecting the [Uninstall] option.

Update Server Install

Plugins can also be installed via an Update Server. The Update Server can be configured by selecting
Settings > Tool Preferences > Package Management > select the Additional Options drop-down > Edit.
Check the box for [Update Server] and configure the three subsequent fields.

Launch ATAK and go to the TAK Package Management screen by navigating to Settings > Tool Prefer-
ences > Package Management. A list of currently installed applications and plug-ins will be displayed.

Select the [Sync] icon to update the list from the server.

The plug-ins and applications listed can be installed, loaded, upgraded and uninstalled in the same manner that was described in the previous section.

Automatic Provisioning (Link EUD)

Using the Link EUD option when ATAK is initially configured, links the user device to an organization’s
server. The list of available plug-ins will be updated in TAK Package Management, based on the user’s
role in the organization. To manually refresh the list, select the [Sync] icon.

68