Sodium Formate 98% Msds Innoas

INNOAS CHEMICAL CO.
, LTD
Material Safety Data Sheet

Sodium Formate
Section 1- Chemical Product and Company Identification
MSDS Name: Sodium Formate

Synonyms: Sodium Salt
Company Identification: Innoas Chemical CO., LTD
1609, PARKSON MANSION, NO.44-60, ZHONGSHAN ROAD, QINGDAO, CHINA
Tel:+86-532-86752059 Fax:+86-532-86752006
Section 2- Composition, Information on Ingredients
CAS# Chemical Name EINECS/ELINCS
141-53-7 SODIUM FORMATE 205-488-0
Hazard Symbols: None listed.

Risk Phrases: None listed.
Section 3- Hazards Identification
EMERGENCY OVERVIEW
Appearance: white. Caution! May cause eye irritation. May cause respiratory tract irritation. This
is expected to be a low hazard for usual industrial handing. The toxicological properties of this
material have not been fully investigated. Hygroscopic. May cause skin irritation.
Target Organs: None known.
Potential Health Effects
Eye: May cause eye irritation.
Skin: Low hazard for usual industrial handling.
Ingestion: Low hazard for usaual industrial handling. The toxicological properties of this
substance have not been fully investigated.
Inhalation: May cause respiratory tract irratation. The toxiclogical properties of this substance
have not been fully investigated.
Chronic: No information found.
Section 4- First Aid Measures

INNOAS CHEMICAL CO., LTD
Eyes: Flush eyes with plenty of water for at least 15 minutes, occationally lifting the upper and
lower eyelids. Get medical aid.
Skin: Flush skin with plenty of soap and water for at least 15 minutes while removing
contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing
before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything
by mouth to an unconscious person. Get medical aid.
Inhaiation: Remove from exposure to fresh air immediately. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms
appear.
Notes to Physician: Treat symptomatically and supportively.
Section 5- Fire Fighting Measures
General Information: As in any fire, wear a self-contained breathing apparatus in

presure-demand, MSHA/NIOSH(approved or equivalent), and full protective gear. Dusts at
sufficient concentrations can form explosive mixtures with air. During a fire, irritating and highly
toxic gases may be generated by thermal decompositon or combustion. Vapors may be heavier
than air. They can spread along the groud and collect in low or confined areas.
Extinguishing Media: For small fires, use water spray, dry chemical, carbon dioxide or chemicals
foam. Do NOT get water inside containers.
Section 6- Accidental Release Measures
General Information: Use proper personal protective equipment as indicated in Section 8.

Spills/ Leaks: Clean up spills immediately, observing precautions in the Protective Equipment
section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty
conditions. Provide ventilation. Do not get water inside containers.
Section 7-Handling and Storage
Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before
reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact
with skin nd eyes. Avoid ingestion and inhalation.
Storage: Store in a cool, dry, well-ventilated area away from incompatible substances. Keep away
from water.
Section 8-Exposure Controls, Personal Protection
Engineering Controls: Use adequate ventilation to keep airborne concentrations low.

Exposure Limits:
Chemical Name ACGIH NIOSH OSHA-Final PELS
SODIUM FORMATE None listed None listed None listed
OSHA Vacated PELs: SODIUM FORAMTE: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Maintain eye wash fountain and quick-drench facilities in work area. Use chemical safety
goggles and /or full face shield where dusting or splashing of solutions is possible.
Skin: Wear appropriate gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to minimize contact with skin.
Section 9- Physical and Chemical Properties
Physical State: Solid

Appearance: white
Odor: formic acid-like- weak odor
PH: No information found.
Vapor Presure: Negligible
Vapor Density: 2.34
Evaporation Rate: negligible
Viscosity:Not available
Boiling Point: Not available.
Freezing/Melting Point: 487 deg F.
NFPA Rating:(estimated) Health:1; Flammability: 0; Reactivity: 0
Explosion Limits, Lower: N/A
Upper: N/A
Solubility: Slightly soluble.
Specific Gravity/Density: 1.92
Molecular Formula: CHO2Na
Moleculat Weight: 67.9956
Section 10- Stability and Reactively

Chemical Stability: Stable uder normal temperatures and pressures.

Conditions to Avoid: High temperatures, incompatible materials, moisture.
Incompatibilities with other Material: Strong oxidizing agents, strong acids.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, sodium oxide.
Hazardous Polymerization: Has not been reported.
Section 11-Toxicological Information
RTECS#:
CAS# 141-53-7: LR0350000
LD50/LC50:
CAS# 141-53-7
Oral, mouse: LD50=11200 mg/kg; <BR.
Epidemiology: No information available.
Teratogenicity: No information available.
Reproductive Effects: No information available.
Neurotoxicity: No information available.
Mutagenicity: Please refer to RTECS# LR0350000 for specific information.
Other Studies: None.
Section 12-Ecological Information
Ecotoxicity: No data available. No infomation available.

Environmental: No information reported.
Physical: No information available.
Other: No information available.
Section 13- Disposal Considerations
Chemical waste generators must determine whether a discarded chemical is classified as a

hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts
261.3. Additionally, waste generators must consult state and local hazardous waste regulations to
ensure complete and accurate classfication.
RCRA P-Series: None listed.
RCRA U-Series: None listed.
Section 14-Transport Information
US DOT IATA RID/ADR IMO Canada TDG
Not regulated as a No information

Shippling Name：
hazardous material available
Hazard Class:
UN Number:
Packing Group:
According to IMDG/IMO,it’s not dangerous cargo.
Section 15- Regulatory Information
US FEDERAL
TSCA
CAS# 141-53-7 is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals are listed under TSCA Section 12b.
Section 302(RQ）
None of the chemicals in this material have an RQ.
Section 302(TPQ)
None of the chemicals in this product have a TPQ.
Section 313
No chemicals are reportalbe under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants. This material does not contain any
Class 1 Ozone depletors. This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA. None of
the chemicals in this product are listed as Priority Pollutants under the CWA.
OSHA:
None of the chemicals in this product are considered highly hazardous by OSHA.
Hazard Symbols:
Not available.
WGK(Water Danger/Protection)
CAS# 141-53-7: 1
Section 16-Additional Information
MSDS Creation Date: 06/01/2020

Revision #4 Date: 3/1/2020
The information above is believed to be accurate and represents the best information currently
available to us. However, we make no warranty of merchantability or any other warranty, express
or implied, with respect to such information, and we assume no liability resulting from its use.
Users should make their own investigations to determine the suitability of the information for
their particular purpose. In no event shall we be liable for any claims, losses, or damages of any
third party or for lost profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if we have been advised of the possibility of such damages.

Sodium Formate 98% Msds Innoas

Uploaded by

Copyright:

Available Formats

Sodium Formate 98% Msds Innoas

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sodium Formate 98% Msds Innoas

Uploaded by

Copyright:

Available Formats

INNOAS CHEMICAL CO.

Material Safety Data Sheet

Section 1- Chemical Product and Company Identification

MSDS Name: Sodium Formate

Section 2- Composition, Information on Ingredients

CAS# Chemical Name EINECS/ELINCS

141-53-7 SODIUM FORMATE 205-488-0

Hazard Symbols: None listed.

Section 3- Hazards Identification

Section 4- First Aid Measures

Section 5- Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in

Section 6- Accidental Release Measures

General Information: Use proper personal protective equipment as indicated in Section 8.

Section 7-Handling and Storage

Section 8-Exposure Controls, Personal Protection

Engineering Controls: Use adequate ventilation to keep airborne concentrations low.

SODIUM FORMATE None listed None listed None listed

Section 9- Physical and Chemical Properties

Physical State: Solid

Section 10- Stability and Reactively

Chemical Stability: Stable uder normal temperatures and pressures.

Section 11-Toxicological Information

Section 12-Ecological Information

Ecotoxicity: No data available. No infomation available.

Section 13- Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a

Section 14-Transport Information

US DOT IATA RID/ADR IMO Canada TDG

Not regulated as a No information

Section 15- Regulatory Information

Section 16-Additional Information

MSDS Creation Date: 06/01/2020

You might also like