DATASHEET 6.

QSFP-DD 100GE DP-QPSK 450KM ETH/OTN

QSFP-DD 100G Ethernet/OpenROADM Coherent Tunable SM 450km, Encryption, CMIS5.0, LC

OVERVIEW

The TQD011-TUNC-SO is an QSFP-DD form-factor (type 2a) DWDM transceiver for 100Gbps Ethernet, OTN and OpenROADM
applications. The transceiver is intended for use in interconnect applications between data centers with switches, routers etc.
having QSFP-DD support but where the services are limited to 100Gbps.

TQD011-TUNC-SO conforms to both the 100G option of OpenZR+ and the OpenROADM 3.0/4.0, using the powerful Open
Forward Error Correction (oFEC) scheme giving a Net Coding Gain (NCG) of 11.6dB at a pre-FEC BER of 2.0x10-2. TQD011-
TUNC-SO also supports the OpenROADM 2.0 with the media format OTU4 and SC-FEC giving a Net Coding Gain (NCG) of 9.4dB
at a pre-FEC BER of 4.5x10-3

The Chromatic Dispersion Compensation (CDC) limit of TQD011-TUNC-SO is 8600ps/nm providing an operating range of 450km
in amplified links.

TQD011-TUNC-SO also allows AES-256 encryption through I2C.

The transceiver is managed via I2C interface and according to CMIS 5.0.

The TQD011-TUNC-SO supports the following CMIS application codes:

CMIS
Media Media Symbol Operating Encryption
Application Host format Payload FEC Modulation
Format Baud rate range support
code
1 CAUI4 100G OpenZR+ oFEC DP-QPSK 30.1Gbd 450km No

2 CAUI4 KR4 FEC 100G OpenZR+ oFEC DP-QPSK 30.1Gbd 450km No

3 100GAUI-2 KP4 FEC 100G OpenZR+ oFEC DP-QPSK 30.1Gbd 450km No

4 CAUI4 100G FlexO-1 oFEC DP-QPSK 31.6Gbd 450km Yes

5 CAUI4 KR4 FEC 100G FlexO-1 oFEC DP-QPSK 31.6Gbd 450km Yes

6 100GAUI-2 KP4 FEC 100G FlexO-1 oFEC DP-QPSK 31.6Gbd 450km Yes

7 OTL4.4 100G FlexO-1 oFEC DP-QPSK 31.6Gbd 450km Yes

8 CAUI4 100G OTU4 SC-FEC DP-DQPSK 28.0Gbd 450km Yes

9 CAUI4 KR4 FEC 100G OTU4 SC-FEC DP-DQPSK 28.0Gbd 450km Yes

10 100GAUI-2 KP4 FEC 100G OTU4 SC-FEC DP-DQPSK 28.0Gbd 450km Yes

11 OTL4.2 100G OTU4 SC-FEC DP-DQPSK 28.0Gbd 450km Yes

Subject to change without notice.

For more information visit smartoptics.com.
DATASHEET 6.9

TECHNICAL DATA
The optical characteristics are divided into Generic and Application code sections. The Generic section defines the common
characteristics, independent of the selected application modes. The Application code section defines application code based optical
characteristics.

The performance is compliant with the respective specifications but can exceed the minimum requirements on some parameters.

GENERIC

Parameter Value Parameter Value

Technology DWDM QSFP-DD type 2a Transmit VOA dynamic range 0 - 10dB

Transmission media SM (2x LC) Transmit wavelengths 191.275 - 196.125THz

Typical reach Unamplified: 130km in minimum 6.25GHz steps

Dispersion limited: 450km Tx In-Band OSNR Min 34dB/0.1nm

Nominal wavelengths Tunable C-band Tx Out-Of-Band OSNR Min 30dB/0.1nm

Interface standards OpenZR+ and OpenROADM Rx Overload 1) Signal power: 13dBm

Protocol support 100GBASE-R Total power: 15dBm

SyncE Wavelength switch time Max 86s channel to channel

Power consumption 17.0W (Class 8) DDM Yes

Operating temperature 0°C to +75°C MSA compliance QSFP-DD MSA

OpenZR+ MSA, OpenROADM
Storage temperature -40°C to +85°C
MSA, CMIS 5.0

1)
Specified to be within the pre-FEC BER range of the selected
application code. Rx damage threshold is located at 16dBm.

Safety/regulatory compliance:

TUV/UL/FDA (contact Smartoptics for latest certification information)

RoHS compliance

Subject to change without notice.

For more information visit smartoptics.com.
DATASHEET 6.9

OPTICAL SPECIFICATION - APPLICATION CODES

The table below lists the primary optical parameters for each supported application code.

CDC range
Rx sens
Appl Line 1) Rx Rx OSNR Rx OSNR @0.5dB
Host format Tx Power @ high
mode rate @ OSNR @0.5dB penalty @1dB penalty OSNR
OSNR 2)
penalty
1 100G CAUI4 -5.0dBm to 0dBm -32dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm

2 100G CAUI4 KR4 FEC -5.0dBm to 0dBm -32dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm

3 100G 100GAUI-2 KP4 FEC -5.0dBm to 0dBm -32dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm

4 100G CAUI4 -5.0dBm to 0dBm -32dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm

5 100G CAUI4 KR4 FEC -5.0dBm to 0dBm -32dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm

6 100G 100GAUI-2 KP4 FEC -5.0dBm to 0dBm -32dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm

7 100G OTL4.2 -5.0dBm to 0dBm -32dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm

8 100G CAUI4 -5.0dBm to 0dBm -30dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm

9 100G CAUI4 KR4 FEC -5.0dBm to 0dBm -30dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm

10 100G 100GAUI-2 KP4 FEC -5.0dBm to 0dBm -30dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm

11 100G OTL4.4 -5.0dBm to 0dBm -30dBm 15.5dB@-20dBm 16.0dB@-23dBm 16.5dB@-25dBm 8 600 ps/nm
1) The module transmit power can be provisioned up to the maximum available TX power. If the TX power is not provisioned by the host, the module TX power will default to the maximum
available power, which can be any power level in the specified 10dB range.

2) Rx sensitivity is specified at a OSNR > 36dB,

FEC modes Latency [µS]

oFEC 11

SC-FEC 20

ORDERING INFORMATION
Ordering code Description

TQD011-TUNC-SO QSFP-DD 100G Ethernet/OTN/OpenROADM, Coherent Tuneable SM 450km Encryption CMIS5.0 LC

Subject to change without notice.

For more information visit smartoptics.com.
DATASHEET 6.9

GENERAL DEFINITIONS

Parameter Description
Grey; Transceiver type for non-WDM applications. Electrical or optical.
CWDM; Transceiver type for CWDM applications using G.694.2 channel grid.
DWDM; Transceiver type for DWDM applications using G.694.1 channel grid.
Technology
BiDi; Transceiver pair using two different wavelength channels operating on a single-fiber.
DAC: Direct Attach Cable. Electrical cable with attached connectors.
AOC: Active Optical Cable. Optical cable with attached connectors.
Transmission Media Type of fiber, e.g. Multimode (MM) or Singlemode (SM). Number of and connector type within brackets (e.g. 2x LC, 1x MPO).
Nominal distance performance based on typical fiber dispersion, fiber loss and power budget properties, i.e. w/o dispersion
Typical reach
compensation and optical amplification. Actual distance is dependent on actual optical path loss and dispersion properties.
Bit rate range Supported bit rate range in Gigabit or Megabit per second (Gbps or Mbps).

Protocols Protocols within supported bit rate range.

Nominal wavelength Typical wavelength(s) from transmitter.

Interface standards Referenced interface standards or MSA’s, e.g. IEEE 802.3 standard for 10GbE services or 100G 4WDM-10 etc.

Power budget Min and max power budget between Transmitter and Receiver w/o optical path penalties.
Maximum amount of tolerated dispersion and required reduction of power budget to maintain stipulated Bit Error Rate (BER) and at
Dispersion tolerance/penalty
a given bit rate.
Max operating case temperature range.
Standard temperature range (C-temp): 0°C to +70°C (32°F to +158°F)
Temperature range
Extended temperature range (E-temp): typically -20°C to +75°C (-4°F to +167°F)
Industrial temperature range (I-temp): -40°C to +85°C (-40°F to +185°F)
Power consumption Worst case power consumption. Will vary over temperature.

Transmitter Output power Average output power. Provided in min and max values.

Receiver minimum input power Minimum average input power at specified BER, normally 1E-12. Note that some protocols require FEC to achieve sufficient BER.

Receiver max input power Maximum average input power giving a BER, normally 1E-12.

DDM Digital Diagnostic Monitoring functionality as defined in e.g. SFF-8472 MSA.

Smartoptics makes no warranties or representations, expressed or implied, of any kind relative to the information or any portion thereof contained in this document or its
adaptation or use, and assumes no responsibility or liability of any kind, including, but not limited to, indirect, special, consequential or incidental damages, for any errors
or inaccuracies contained in the information or arising from the adaptation or use of the information or any portion thereof. The information in this document is subject to
change without notice.

Subject to change without notice.

For more information visit smartoptics.com.