Scribd Logo
Upload

Welcome to Scribd!

  • 48 views

    X Treme WindowMaster Whipstock System SLSH

    Uploaded by

    fetorreze

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    X Treme WindowMaster Whipstock System SLSH

    Uploaded by

    fetorreze
    48 views2 pages

    Original Title

    X-treme-WindowMaster-whipstock-system-slsh

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    48 views2 pages

    X Treme WindowMaster Whipstock System SLSH

    Uploaded by

    fetorreze

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    OILFIELD SERVICES

    Get faster, cleaner, CLEANER APPLICATION


    The X-treme™ Windowmaster™ whipstock system provides
    quicker, more efficient sidetracks, and is capable of milling The X-treme Windowmaster system mills a perfect Sidetrack operations
    a window in a single trip. window with extended rat holes every time – so there’s

    better sidetracks FASTER


    The X-treme Windowmaster system lets you sidetrack
    no requirement for additional trips to ream or polish the
    casing exit window.
    BENEFITS
    • Provides limitless tripping operations

    every time
    three times faster and reduce rig time by as much as Mill a cleaner window with:
    • Removes limitations with unlimited reorientation
    50 percent over conventional methods, all while • A hybrid drill bit that’s specifically engineered for
    and resetting of whipstock
    eliminating a dedicated clean-out run. milling in any rock type or casing grade
    Dramatically reduce NPT • The proprietary Baker Hughes advanced milling • Eliminates extra clean out runs

    X-treme WindowMaster Set at any depth, hydraulically or annularly, without


    additional tools – eliminating the need to trip out and
    technology combined with the proprietary Baker Hughes
    PathMaker™ polycrystalline diamond cutters
    • Improves rig floor handling and operations with
    elimination of shear bolt

    whipstock system use a back-up system


    Dramatically reduce drilling time
    BETTER
    The X-treme Windowmaster system collects downhole
    • Integrates annular activation with mechanical
    activation as backup
    • Set the whipstock in stubborn casings, at greater depths, data with the Baker Hughes xSight™ analytics service
    • Increases efficiency with dual purpose mill and drill
    with the ability to push and pull for casing exits to help you with pre-job planning and
    • Work through restrictions and trip in hole with virtually post-job analysis.
    unlimited tripping speed, with no need for a prior Real-time downhole data lets you:
    clean-out operation • Optimize milling parameters to get through tight spots
    • Make deeper exit points and shorter laterals by passing in the wellbore
    through restrictions such as casing ovality or deformation • Monitor and confirm the load so that you know when the
    Eliminate risky red zone exposure during assembly milling BHA has broken free from the whipstock ramp
    Improve handling and operation – and save up to three
    hours per job – with a design that requires only a standard
    drill-pipe connection to mate the lead mill and connector
    HOW THE X-TREME WINDOWMASTER SYSTEM WORKS if needed, can be un-set and re-oriented/re-set after
    A proprietary connector replaces the traditional bolt, initial activation. A sacrificial scraper can also be installed
    eliminating the operational limitations like reduced or low to scrape the setting area. Once at depth, the well is closed
    tripping speed, soft motion starts and stops, problems with in and pressure is applied on the annulus to activate the
    rotation, and weight limitations typically put in place to anchor. The anchor is then fully set by use of weigh, and
    avoid failure points and breakage. rotation is applied to shear the milling assembly free from
    the connector. The milling assembly has also undergone
    This system offers a very robust design with few moving
    significant design changes to ensure effective and
    parts, and includes built-in redundant mechanical
    optimized milling performance.
    activation. The anchor can be set in any direction and,

    HYBRID BIT TECHNOLOGY ENGINEERED


    FOR MILLING IN ANY ROCK TYPE OR CASING GRADE Whipstock system
    High load connector Single steel body mill with PathMaker
    optimizes geometry for polycrystalline diamond cutters
    improved window quality and tungsten carbide inserts

    bakerhughes.com
    Copyright 2022 Baker Hughes Company. All rights reserved. 83875

    You might also like