Industrial Ethernet Gateways

MGate™ EIP3000 Series

1 and 2-port EtherNet/IP to DF1 gateways

››PCCC objects for Rockwell Automation networks supported

››Use ProCOM to implement control via COM port mapping
››8 simultaneous EtherNet/IP client/server pairs with up to 16
queued requests
››Serial redirector keeps the original serial master and slave
connection while connecting devices to the Ethernet
››EtherNet/IP and DF1 protocol analyzer for easy troubleshooting
››Redundant dual DC power inputs
››Built-in Ethernet cascading for easy wiring
››-40 to 75°C wide operating temperature models available

Overview
MGate™ EIP3000 gateways provide EtherNet/IP to DF1 protocol MGate™ series overcomes the difficulties of connecting between
conversion for users who need to connect Allen Bradley PLCs to legacy serial devices and SCADA software. Both 1 and 2-port gateways
an EtherNet/IP network. With a number of innovative functions, the are available for use with different sized control networks.

Protocol Conversion between DF1 and EtherNet/IP

By supporting PCCC objects on CIP, the MGate™ EIP3000 can users who develop control software based on EtherNet/IP, MGate
communicate seamlessly with SCADA software such as RSLinx. For EIP3000 offers the standard interface for connection.

Support for Multiple EtherNet/IP Connections

MGate™ EIP3000 gateways support up to 16 EtherNet/IP clients at a time, and the multiple connection capability can help establish
and servers simultaneously. Each client can send up to 16 requests redundancy for more complex control systems.

Windows Utility for Easy Setup and Traffic Monitoring

Moxa provides a user-friendly Windows utility with multi-language the gateway, but also records all commands and responses that pass
support. The utility supports a traffic monitoring function for through the gateway. The utility helps users determine the root cause
EtherNet/IP and DF1 protocols, and not only logs events initiated by of failures and performance bottlenecks.

1 w w w. m o x a . c o m [email protected]
 Industrial Ethernet Gateways

Serial Redirector Function Maintains Original Master/Slave Connections

The serial redirector function allows the commands of a serial master architecture or software. With the serial redirector function, MGate™
(command initiator) to be redirected to the serial slave (command EIP3000 gateways can establish redundant control of legacy slave
executor) on another port. In addition, a serial master can operate devices that were originally designed to be controlled by a single serial
simultaneously with EtherNet/IP masters without changing the DF1 master.

ProCOM Implements Control via COM Port Mapping

Each MGate™ EIP3000 gateway supports virtual serial ports for the connection over the Ethernet. The gateway supports up to 4 virtual
remote PC. You can connect to the MGate™ EIP3000 through the COM port connections and offers greater flexibility when designing
COM port by using Moxa’s Real COM driver, with the actual physical redundant control systems.

Pull high/low Resistors and Terminator Selection

When using termination resistors to prevent serial signal reflection, universally compatible with all environments, the EIP3000 has DIP
it is important to set the pull high/low resistors correctly so that the switches on the bottom panel for setting the termination and pull high/
electrical signal is not corrupted. Since no set of resistor values is low resistor values.

Built-in Isolation
Complex device networks that incorporate high amperage devices discharges, magnetic noise, or common mode transients. MGate™
could be subject to electrical signal distortion from electrical series products solve this problem by using built-in optical isolation.

Specifications
Ethernet Interface Environmental Limits
Number of Ports: 2 (2 IPs) Operating Temperature:
Speed: 10/100 Mbps, Auto MDI/MDIX Standard Models: 0 to 55°C (32 to 131°F)
Connector: 8-pin RJ45 Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Magnetic Isolation Protection: 1.5 KV built-in Storage Temperature: -40 to 85°C (-40 to 185°F)
Serial Interface Ambient Relative Humidity: 5 to 95% (non-condensing)
Number of Ports: Power Requirements
EIP3170/3170I: 1 Input Voltage: 12 to 48 VDC
EIP3270/3270I: 2 Power Connector: Terminal block
Serial Standards: RS-232/422, software selectable Power Consumption:
Connectors: MGate M3170: 435 mA (max.)
EIP3170/3170I: DB9 male for RS-232, terminal block for RS-422 MGate M3170I: 555 mA (max.)
EIP3270/3270I: DB9 male x 2 MGate M3270: 435 mA (max.)
ESD Protection: 15 KV for all signals MGate M3270I: 510 mA (max.)
Serial Communication Parameters Standards and Certifications
Data Bits: 8 Safety: UL 508, EN 60950-1
Stop Bits: 1, 2 Hazardous Location:
Parity: None, Even, Odd UL/cUL Class I Division 2 Groups A/B/C/D,
Flow Control: RTS/CTS, DTR/DSR (RS-232 only) ATEX Zone 2
Baudrate: 1200 bps to 921.6 Kbps EMC: CE, FCC
Serial Signals EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND EMS:
RS-422: Tx+, Tx-, Rx+, Rx-, GND EN 55024,
Ethernet Protocol: CIP (PCCC) on EtherNet/IP EN 61000-4-2 (ESD) Level 3,
Serial Protocol: DF1 Full-duplex EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
Software
EN 61000-4-5 (Surge) Level 3,
Driver Support: Windows Real COM Drivers: Windows 2000, Windows
EN 61000-4-6 (CS) Level 3,
XP/2003/Vista/200/8/7 x86/x64
EN 61000-4-8,
Physical Characteristics EN 61000-4-11,
Housing: Plastic Shock: IEC 60068-2-27
Weight: Freefall: IEC 60068-2-23
MGate EIP3170: 360 g Vibration: IEC 60068-2-6
MGate EIP3270: 380 g
Dimensions: Reliability
MTBF (mean time between failures):
Without ears: 29 x 89.2 x 118.5 mm (1.14 x 3.51 x 4.67 in)
MGate EIP3170: 210,794 hrs
With ears extended: 29 x 89.2 x 124.5 mm (1.14 x 3.51 x 4.90 in)
MGate EIP3270: 125,234 hrs

2 w w w. m o x a . c o m [email protected]
 Industrial Ethernet Gateways

Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty

Dimensions
Unit: mm (inch)
EIP3170/EIP3270 20.6 (0.81) 29.91 (1.18)

29 (1.14)
14.5 14.5
(0.57) (0.57) 89.2 (3.51) MGate™ EIP3170

9.2 (0.36)
7.2 (0.28)
7.1 (0.28)
7.2 (0.28)
69.5 (2.74)

7.1 (0.28)
25.9 (1.02) 35 (1.38)
124.5 (4.9)

MGate™ EIP3270
20 (0.79)

25.9 (1.02) 35 (1.38)

Ordering Information
Available Models Package Checklist
MGate EIP3170: 1-port EtherNet/IP to DF1 gateway, 0 to 55°C operating temperature • 1 MGate EIP3170 or EIP3170I or
MGate EIP3170I: 1-port EtherNet/IP to DF1 gateway with 2 KV isolation, 0 to 55°C operating temperature EIP3270 or EIP3270I EtherNet/IP
MGate EIP3270: 2-port EtherNet/IP to DF1 gateway, 0 to 55°C operating temperature gateway
MGate EIP3270I: 2-port EtherNet/IP to DF1 gateway with 2 KV isolation, 0 to 55°C operating temperature • Documentation and software CD
MGate EIP3170-T: 1-port EtherNet/IP to DF1 gateway, -40 to 75°C operating temperature • Quick installation guide (printed)
MGate EIP3170I-T: 1-port EtherNet/IP to DF1 gateway with 2 KV isolation, -40 to 75°C operating • Warranty card
temperature
MGate EIP3270-T: 2-port EtherNet/IP to DF1 gateway, -40 to 75°C operating temperature
MGate EIP3270I-T: 2-port EtherNet/IP to DF1 gateway with 2 KV isolation, -40 to 75°C operating temperature
Optional Accessories (can be purchased separately)
DR-45-24: 24 VDC DIN-rail power supply (2 A @ 45 W) with universal 85 to 264 VAC input
DR-75-24: 24 VDC DIN-rail power supply (3.2 A @ 75 W) with universal 85 to 264 VAC input
DR-120-24: 24 VDC DIN-rail power supply (5 A @ 120 W) with switch for choosing 88 to 132 VAC, or 176 to 264 VAC input

3 © Moxa Inc. All Rights Reserved. Updated Apr. 11, 2011. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.