Scribd Logo
Upload

Welcome to Scribd!

  • 5 views

    ABG ZzPozibreak 4SD - NW8.NW16 (L) (SC1) Rev 1.00 DATASHEET

    Uploaded by

    tropicaldesigns3
    The document describes a geocomposite capillary break layer called POZIBREAK 4SD/NW8/NW16 [L]. It provides details on its composition, properties, dimensions, and applications. The product consists of a cuspated HDPE core bonded between non-woven geotextiles. It is designed to prevent capillary moisture rise and allow lateral drainage in contaminated soils.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ABG ZzPozibreak 4SD - NW8.NW16 (L) (SC1) Rev 1.00 DATASHEET

    Uploaded by

    tropicaldesigns3
    5 views1 page
    The document describes a geocomposite capillary break layer called POZIBREAK 4SD/NW8/NW16 [L]. It provides details on its composition, properties, dimensions, and applications. The product consists of a cuspated HDPE core bonded between non-woven geotextiles. It is designed to prevent capillary moisture rise and allow lateral drainage in contaminated soils.

    Original Title

    ABG ZzPozibreak 4SD.NW8.NW16 [L] {SC1} Rev 1.00 DATASHEET

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a geocomposite capillary break layer called POZIBREAK 4SD/NW8/NW16 [L]. It provides details on its composition, properties, dimensions, and applications. The product consists of a cuspated HDPE core bonded between non-woven geotextiles. It is designed to prevent capillary moisture rise and allow lateral drainage in contaminated soils.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    5 views1 page

    ABG ZzPozibreak 4SD - NW8.NW16 (L) (SC1) Rev 1.00 DATASHEET

    Uploaded by

    tropicaldesigns3
    The document describes a geocomposite capillary break layer called POZIBREAK 4SD/NW8/NW16 [L]. It provides details on its composition, properties, dimensions, and applications. The product consists of a cuspated HDPE core bonded between non-woven geotextiles. It is designed to prevent capillary moisture rise and allow lateral drainage in contaminated soils.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Pozibreak 4SD/NW8/NW16 [L]

    POZIBREAK 4SD/NW8/NW16 [L] is a geocomposite capillary break layer comprising a cuspated HDPE
    (High Density Polyethylene) core with a non-woven geotextile filter thermally bonded on both sides. It is
    a high performance geocomposite providing an effective capillary break and lateral drainage layer with

    Data Sheet
    the cuspated core maintaining an open void by a combination of high compressive strength and excellent
    support to the geotextile under the action of soil pressure. The lower side of the core is practically
    impermeable, providing a barrier to capillary moisture for extra protection in addition to the void.
    The textile filters have a flap extending beyond the core on both edges. The product is wide width and
    has a 50mm impermeable selvedge on one edge to facilitate overlap of adjacent rolls and the overlaps
    are usually configured to allow water to exit. Its major application is as a capillary break layer in saline,
    contaminated or frost-susceptible ground conditions.
    Geocomposite Properties
    Thickness at 2kPa (mm) 6.2 ±10% EN ISO 9863-1
    Mass per unit area (g/m²) 840 approx EN ISO 9864
    Tensile strength MD / CMD (kN/m) 30 / 30 -20% EN ISO 10319
    Elongation at peak MD / CMD (%) 40 / 50 nominal EN ISO 10319
    CBR puncture resistance (N) 4 700 -20% EN ISO 12236
    Perpendicular Water Inflow (dimple side only)
    Water flow at 50mm head (l/m²·s) 103 -30% EN ISO 11058
    Breakthrough head (mm) 0 nominal
    (2)
    In-plane water flow MD HG = 1.0 HG = 0.1 Hydraulic gradient
    at 20kPa confining pressure (l/m·s) 0.85 ±0.15 0.25 ±0.07 EN ISO 12958
    at 100kPa confining pressure (l/m·s) 0.65 ±0.15 0.20 ±0.05 EN ISO 12958
    at 200kPa confining pressure (l/m·s) 0.55 ±0.10 0.15 ±0.05 EN ISO 12958
    Measured with soft foam contact surfaces to simulate textile intrusion into the core due to soil pressure.
    As a capillary break layer, POZIBREAK should not be designed to use >50% of its flow capacity.
    Resistance to UV weathering Stabilised EN 12224
    Resistance to chemicals & microbes Excellent EN 14030/12225
    Design life 120 years (manufacturer’s declaration)
    Core Properties
    Type Cuspated HDPE with impermeable lower side
    Void height at 30 kPa (mm) 3 With soft platens
    Geotextile Properties Dimple side Flat side
    Thickness at 2kPa (mm) 1.2 1.6 ±20% EN ISO 9863-1
    Tensile strength MD/CMD (kN/m) 9.5 / 9.5 16 / 16 -13% EN ISO 10319
    Pore size 090 (µm) 120 90 ±30% EN ISO 12956
    CBR puncture resistance (N) 1 600 2 700 -20% EN ISO 12236
    Dynamic perforation cone drop (mm) 32 19 +20% EN ISO 13433
    Type and material Non-woven needle-punched and heat-treated staple fibre polypropylene
    Product Dimensions
    Standard roll dimensions 2.2m wide. Roll length to be advised.
    Notes
    1. The values given are indicative and correspond to nominal results obtained in our laboratories and testing institutes. In line with our policy of
    continuous improvement the right is reserved to make changes without notice at any time.
    2. CMD flow is typically 80% of the value in the MD.
    3. The tolerance on roll length is ±1.5% and on roll width is ±1.0%.
    4. Final determination of the suitability of any information is the sole responsibility of the user. ABG will be pleased to discuss the use of this or
    any other product but responsibility for selection of a material and its application in any specific project remains with the user.
    ABG ZzPozibreak 4SD.NW8.NW16 [L] {SC1} Rev 1.00.docx

    abg ltd. E7 Meltham Mills Rd, Meltham, West Yorkshire, HD9 4DS
    UK t 01484 852096 e [email protected] Export t +44(0)1484 852250 e [email protected]
    www.abgltd.com

    You might also like