Boyles C5/C5C

Compact and powerful core drilling rig

1
 Power and flexibility
in a compact design The rig can be dvided into seven main All drilling functions are performed, using
modules, the heaviest weight as 1 000 kg the ergonomic and user-friendly control
(2 200 lbs). Each module is equipped with panel which also displays all the drilling
The Boyles C5/C5C surface core exploration drilling rig is lifting points to ensure safe and effective parameters necessary to ensure
helicopter transportation. productive drilling.
compact, yet powerful. Its compact design makes it easy to
position and transport, even by helicopter. The sturdy and
robust design enables continuous operation also in remote
locations and harsh operating environments.

Main benefits
A sturdy mast and feed system ensures minimal
vibration, straight bore holes and optimum lifting The Boyles C5C crawler rigs come with
Small and compact-Despite it's small and compact capacity. It can drill effectively from 45 to 90 degree a radio remote control, which allows you
exterior, the Boyles C5/C5C provides the torque and angles. The three-piece, de-mountable mast adds to tram the rig from a distance providing
a safer working environment.
RPM necessry for BO-PO size coring, making it the most further to the rig’s excellent mobility.
powerful rig in its class.

Robust design-Designed for sturdiness and operation in

harsh environments, the Boyles C5/C5C just goes on and
on without interruption, minimizing service requirements. Tier III Cummins engine is recognized for its durable life, efficient
operation and capability to minimize fuel consumption even in
Safety-The rig is designed with safety in mind, the toughest of drilling operations.
minimizing the risk of personal injury during operation.

The rig is equiped with the Durahead 2-gear drive

rotation unit that provides the necessary torque and
rpm speed ranges for coring and comes with an
improved design of chuck and jaws.

The rig is equipped with safety guard

around the rotation unit which provides
operators with operational safety.

2 3
 Technical specifications

Second to none in its drill class Boyles C5/C5C

Main hoist
Wireline hoist
The Boyles C5/C5C guarantees high performance and productivity coupled with the The powerful main hoist, equipped with a
The wireline hoist has a high level of speed
service and support necessary to maintain and ensure the rig’s durability and continuous control to ensure safe and consistent operation.
hydraulic motor and a dual brake system,
ensures well-controlled feed. The dual
uptime. It is an affordable, fully hydraulic machine that takes a leadership position in its
brake system offers both dynamic and
drill class segment. static breaking. When the lifting operation
is stopped, firm self-locking is applied.
Rotation unit
+ Depth capacity The rotation unit can handle BO-PO
Robustly designed down to the smallest component, the Boyles C5/C5C rods and BW-HW casing. It consists
of a hydraulic motor, a sealed gear-
has a drilling depth capacity of 1 044 meters N-size making it
box, a hollow spindle and an Epiroc
suitable for drilling at large depths in remote locations.
hydraulic chuck, and quick change
chuck jaws. The rotation speed is
adjustable from the control panel.

+ Ergonomics and safety

The rig is easy to operate using an intuitive control panel. All drilling
functions can be operated from the control panel. For example, you can
make and break rods without manual intervention or being close to any
moving parts.
Standard equipment
• Mast in three sections • Manual leveling jacks
• Large crown sheave wheel • Fuel tank 200 l
• Wear liners on lower mast • Fuel filter and water separator
• Safety guards • Hydraulic mast raise
+ Productivity and lower operational costs •
•
Hydraulic oil fill pump and filtration system
Tier III diesel engine
•
•
Lighting kit
Emergency-stop devices
Every part and component is of the highest quality and standard, designed • Control panel • Spindle tachometer
with ruggedness and durability in mind. The Boyles C5/C5C is synonymous • Hydraulic rod holding clamp
with productive drilling, maximum uptime and low maintenance
requirements.
Main hoist Rotation unit
Metric US Model Durahead 6M
Hydraulic motor – variable speed/
Single line capacity, bare drum 69 kN 15 500 lb Power
reversible
Line speed, bare drum 39.7 m/min 130 ft/min Final drive Gear driven
Cable size 27 mx 16 mm 89' x 0.63" Spindle (inner diameter) 124 mm (4.9")
Max torque 6 787 Nm

A comprehensive
Max speed 1 300 rpm

Rod clamp

service offering Hydraulically open and close. Easy-to-remove

jaws, common jaws from 56 mm to 117 mm
Max diameter
Metric

210 mm
US

8.3"

Even the best equipment needs to Max clamping diameter 117 mm 4.6" Mast and feed system
Holding capacity Up to 13 000 kg 29 000 lb
be serviced regularly to make sure it Metric US

sustains peak performance. An Epiroc Feed travel 2.0 m 6.6'

service solution offers peace of mind, Feed speeds Fast and slow with variable control
maximizing availability and performance Depth capacity Mast dump 0.42 m 1.4'
throughout the lifetime of your equipment. Standard Thin Wall Rods Thrust 59.6 kN 13 390 lb
Hole size
We focus on safety, productivity Metric US Metric US Pull 107 kN 24 055 lb

and reliability. B wireline 1 325 m 4 347' 1 573 m 5 161' Drilling angle 45° – 90°

N wireline 1 044 m 3 425' 1 191 m 3 907' Rod pull length 6.09 m 20'

By combining genuine parts and H wireline 693 m 2 274' 948 m 3 110'

an Epiroc service from our certified P wireline 423 m 1 388' 664 m 2 178'

technicians, we safeguard your *These figures serve as guidelines only. They are calculated with available pull force from
main winch, weight of drill string in water filled hole and average WOB.
productivity – wherever you are. Epiroc cannot guarantee these capacities will be reached in all working conditions due to
varying factors such as ITH used, conditions of the ground and differences in operation.

4 5
 Technical specifications Technical specifications

Drill base supports Wireline hoist Working dimensions

Trailer mounted rig with two 770 mm Capacity 1 500 m x 6 mm, 1 850 m x 5 mm Boyles C5 Boyles C5C
Mount/base system Dimension
wheels and towing package
Line pull Bare drum: 9.0 kN, full drum: 2.4 kN Metric US Metric US
4 mechanical jacks and can adjust rig
Support Bare drum: 126 m/min (413 ft/min); A (45˚ drilling) 7 719 mm 304" 7 726mm 304"
height manually Line speed
full drum: 484 m/min (1 588 ft/min)
Pad diameter Ø200 mm B (90˚ drilling) 10 112 mm 398" 10 119 mm 398"

Leg adjust range 550 mm (21.7") C (45˚ drilling) 7 612 mm 300" 7 599 mm 299"
D (90˚ drilling) 6 073 mm 239" 4 513 mm 178"

Spindle data
Hydraulic system
Range selection: Manual control from operator’s station
Primary pump 25 MPa, 182 l/min (3 626 psi, 48 gal/min) Hinged head: Swing away
Secondary pump 20 MPa, 135 l/min (2 901 psi, 36gal/min) Torque
Auxiliary pump 21.5 MPa, 39 l/min (3 118 psi, 10 gal/min) Ratio Speed, rpm Boyles C5 Boyles C5C
Metric US
Hydraulic oil cooling Air
Low speed 17.55 : 1 50 – 200 rpm 6 787 – 2 672 Nm 5 002 - 1 969 lbf
High speed 2.70 : 1 350 – 1 300 rpm 1 066 – 420 Nm 785 - 309 lbf

Chuck assembly
Type Hydraulic open, spring close
Maximum diameter 124 mm (4.6")
Weight
Holding capacity 18 000 kg (39 600 lb) N
Metric US
Complete rig Boyles C5 5 700 kg 12 566 lb
Complete rig Boyles C5C 8 100 kg 17 857 lb
Optional rodholder (gas pressure)
Trido 140 315 kg 694 lb
Type Hydraulically opened, gas pressure locked

Selections of options
Power unit L
L K
Manufacture Cummins
• Tool kit
• Hydraulic jack legs K M
Mode QSB4.5 Tier III
• Gas pressure rod holder - PO size
Volume 4.5 liter, 4 cyl
• Hydraulic mud mixer M
Power 119 kW (160 hp) • Hydraulic mud pump kit, Trido 140, 140 l/min / 7 MPa
RPM 2 200 • Battery terminal for export
Engine type
Diesel turbocharged, air-to-air charge • RRC (Radio Remote Control) (Boyles C5C)
air cooled • Water flow meter kit E
Cooling system Water • Quick diconnect kit for fly operations E
I
Electrical system 24V • Engine covers

F F
J I
Boyles C5 Boyles C5C
G G
90° 90°

H H

45° 45°

Transport dimensions
B
B Boyles C5 Boyles C5C
Dimension
Metric US Metric US
A
A E 6 073 mm 239" 4 513 mm 178"
F 2 138 mm 84" 2 146 mm 85"

G 330 mm 13" 287 mm 11"

H 3 202 mm 126" 3 331 mm 131"

I 417 mm 16" 387 mm 15"
J 1 947 mm 77" - -
K 220 mm 9" 300 mm 12"
L 2 160 mm 85" 2 134 mm 84”
D D M(incl. wheels) 2 200 mm 87" 2 594 mm 102“
C C N - - 2 356 mm 98"

6 7
9868 0036 01d 2022-11 Nanjing, China. Legal Notice © Copyright 2022 Epiroc (Nanjing) Construction and Mining Equipment Ltd., Nanjing, China. All product names in this publication are trademarks of Epiroc. Any unauthorized
use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are
subject to change without notice. Consult your Epiroc Customer Center for specific information.

United in performance.

succeed today and the technology to lead tomorrow.

Inspired by innovation.

Count on Epiroc to deliver the solutions you need to

Performance unites us, innovation inspires us, and
commitment drives us to keep moving forward.

epiroc.com