PRBT-0416 SGConfig 11.1 Release Notification V100 R0
PRBT-0416 SGConfig 11.1 Release Notification V100 R0
PRBT-0416 SGConfig 11.1 Release Notification V100 R0
Grid Solutions
SGConfig 11.1 includes all the functionality available in the ConfigPro software, provides enhanced visual representation of your
substation hardware configuration and device software configuration.
SGConfig™ version 11.1 encompasses all the features of the following software products:
• SGConfig 11.0 and prior.
• ConfigPro™, the previous configuration tool for the GE Grid Solutions D20*, D200*, D25*, and iBox* product lines.
• D400™ Utilities version 3.0.0 and earlier releases of the IEC 61850 Loader.
Before Installation
To ensure the best user experience, it is highly recommended that you install the MicrosoftTM Excel add-in.
This Excel add-in only works with the 32-bit versions of MicrosoftTM Excel.
Installation of the MicrosoftTM Excel add-in is provided as an SGConfig installation wizard option.
This version of SGConfig supports D20MX v1.8 firmware.
DSAS will also feature speed improvements, advanced editor capabilities, and other new features. Please contact
[email protected] if you would like to join the DSAS beta program, for an early preview of the software.
Support is not provided for versions of this product that are installed on operating systems other than those identified above, as
the operation of this product has not been verified for any other combinations of operating systems.
Firewall Exceptions
Users are notified of and can approve the creation of any firewall exceptions required for the correct functioning of the SGConfig
11.1 application.
PRBT-0416 2 GE Information
Product Bulletin
LogicLinx 32-bit editor upgrade from v3.0/v3.1/v3.2 to v3.21
Upgrading from LogicLinx Editor 3.0/3.1/3.2 to 3.21 can be performed during the installation of SGConfig 11.1 or by using the
Upgrade LogicLinx 32-bit Editor shortcut after installing SGConfig 11.1. These installations manage the entire upgrade from
v3.0/v3.1/v3.2 to v3.21, and no uninstall of components is necessary.
In addition, all licenses from v3.0/3.1/v3.2 will work with v3.21 at no additional cost.
Evaluation license
The LogicLinx 32-bit editor is delivered with a 60-day evaluation license.
There is a difference between the evaluation license start dates for the LogicLinx 16-bit editor and the LogicLinx 32-bit editor. The
LogicLinx editor evaluation license starts:
• Immediately when the LogicLinx 16-bit editor is installed and is available for a 30-day period.
• The first time the LogicLinx 32-bit editor is launched and is available for a 60-day period. That is, the evaluation period
does not start when the LogicLinx 32-bit editor is installed.
• After the evaluation license expires, you are not able to use the LogicLinx 32-bit editor. To resume use of the LogicLinx 32-
bit Editor, you will need to purchase a Software license or a USB dongle.
PRBT-0416 3 GE Information
Product Bulletin
Q3: Are configurations stored in a single default directory, as they are in ConfigPro?
A: One of the main differences between the legacy ConfigPro Setup software and SGConfig is the internal architecture of the
product. ConfigPro is based on a file system for archival of configuration data. To enable long term product sustainability
and expandability of the SGConfig software, the architecture of the setup software was re-designed to operate using a
database architecture for data management. Configurations in SGConfig are stored inside of the repository of the SQL
Database and a single external file.
Q4: Can a configuration built in SGConfig v11.1 be used in earlier versions of SGConfig?
A: Partially. The design of SGConfig v11.x is slightly different from that of previous versions of SGConfig. While configurations
built in earlier versions of SGConfig can be restored in SGConfig v11.1, configurations built in SGConfig v11.1 have the
following restrictions:
• SGConfig 11.1 configurations can be used in SGConfig 11.0 without any restrictions
• SGConfig 11.x configurations can be saved in SGConfig 10.0 format for use in SGConfig 10.0.
• SGConfig 11.x configurations cannot be used in versions prior to SGConfig 10.0.
• SGConfig configurations cannot be used in ConfigPro.
Additional Information
For more detailed information on the SGConfig v11.1 release, see the SGConfig 11.1 tool > Getting Started > Release Notes.
For more information on the new features provided in SGConfig v11.1 release, see the SGConfig online help Contents tab >
SGConfig book > What’s New topic.
Visit GE Substation Automation technical support website for software updates: http://sc.ge.com/*SASTechSupport
Product Support
If you need help with any aspect of your GE Grid Solutions product, you can:
• Access the GE Grid Solutions Web site
• Search the GE Technical Support library
• Contact Technical Support
PRBT-0416 4 GE Information
Product Bulletin
Copyright Notice
© 2018, General Electric Company. All rights reserved.
The information contained in this online publication is the exclusive property of General Electric Company, except as otherwise
indicated. You may view, copy and print documents and graphics incorporated in this online publication (the “Documents”) subject
to the following: (1) the Documents may be used solely for personal, informational, non-commercial purposes; (2) the Documents
may not be modified or altered in any way; and (3) General Electric Company withholds permission for making the Documents or
any portion thereof accessible via the internet. Except as expressly provided herein, you may not use, copy, print, display,
reproduce, publish, license, post, transmit or distribute the Documents in whole or in part without the prior written permission of
General Electric Company. If applicable, any use, modification, reproduction, release, performance, display, or disclosure of the
Software Product and Associated Material by the U.S. Government shall be governed solely by the terms of the License Agreement
and shall be prohibited except to the extent expressly permitted by the terms of the License Agreement.
The information contained in this online publication is subject to change without notice. The software described in this online
publication is supplied under license and may be used or copied only in accordance with the terms of such license.
Trademark Notice
GE and the GE monogram are trademarks and service marks of General Electric Company.
* Trademarks of General Electric Company. Other company or product names mentioned in this document may be trademarks or
registered trademarks of their respective companies.
PRBT-0416 5 GE Information