JZ881 User's Manual

JZ881 Micro Power Wireless Module
User’s Manual
SHEN JIZHUO TECHNOLOGY CO., LTD
TEL: +86-755-83304518 / 83308451 FAX: +86-755-83302824

Address: NO.813,212BLD,Tairan Tech Park, Futian District Shenzhen China
Post Code：518040
Website：http://www.jizhuo.com/page/cn/english.asp?type_id=1
EMAIL：[email protected] or [email protected]
MSN ID: [email protected]
JZ873 Mini Power Wireless Module User’s Manual
Before using the product, please read the user’s manual carefully. Any question in technical, you can
contact us. Tel: +86-755-81353151，83304518.
About JZ881
JZ881, the Micro power wireless module, is used as the wireless data transmission in short distance.
With the small size, weight and power consumption and good stability and reliability, it has the function
of bi-directional data sign transmission, test and control.
It is used for Wireless meter reading, such as water meter, electric meter and gas meter, parking meter,
intellective card, electronic weighing apparatus, meter for checking on work attendance, queue wireless meter,
building control, shipping company control, alarm system, intelligent equipment, Automatic data collecting
system; Industrial remote control and remote test building automation, safety and security, powerhouse
equipment wireless monitor, entrance control system, etc. It provide the USB power interface to be convenient
for the mini computer and PC users if necessary.
JZ8881 Feature
1.Ultra low power transmission
Transmission power ＜10mW, high receiving sensitivity: -120dbm, size: 39.4mm*24mm*8 mm.
2. Low power consumption
Receiving current<35mA, transmission current<40mA, sleeping current (the user need to ask for it before
place an order). < 1mA.
3. ISM frequency band, not requiring on application of frequency point
Carrier frequency of 490MHz，also capable of 160/230/315MHz
4. High anti-interference and low BER (Bit error Rate)
Based on the FSK modulation mode, it adopts the efficient communication protocol. The actual bit error
rate of 10-5 ~ 10-6 can be achieved when channel bit error rate is 10-2.
5. Long transmission distance
Within the range of visibility, the reliable transmission distance is（BER=10-3/1200bps） >500m when the
antenna height is greater than 2m (BER=10-3/9600bps).
6. Transparent data transmission
Transparent data interface is offered to suit any standard or nonstandard user protocol. Any false data
generated in the air can be filtrated automatically (What has been received is exactly what has been
transmitted). The charge time for receiving and sending <10ms.
7. Multi-channel and speed
The standard JZ881 configuration provides 8 channels to meet the multiple communication combination
mode of the users. It has baud rate to be chosen such as 1200bps、2400bps、4800bps、9600bps、19200bps. The
wireless transmission rate is direct ratio with baud rate of interface to meet user’s equipment requirement.
8. High speed wireless communication and large data buffer
When the speed rate in the air is quicker than interface’s, allowing to transmit unlimited length data at one
time, when the speed rate is slower or equal the interface’s, allowing the transmission of 255 Bytes long data
frames at one time for more flexible programming by users.
9. Intelligent data control and the user doesn’t need to prepare excessive programs
Even for semi duplex communication, the user doesn’t need to prepare excessive programs, only
Shenzhen Jizhuo technology CO.,LTD,China TEL：+86-755-83304518 http://www.jizhuo.com 1

receiving/transmitting the data from the interface. JZ881 will automatically complete the other operations,
such as transmission/receiving conversion in the air, control, etc.
10. High reliability, small and light
Single chip radio- frequency integrated circuit and single chip MCU are used for lessened peripheral
circuits, high reliability, and low failure rate.
11. Watchdog monitor
Watchdog monitors the inner function, so that change the traditional product structure and improve the
product reliability.
Application of JZ881
1. Dimension
(Remarks: Jack space between is 2.0 mm.)

2.JZ881 interface definition

1) User’s interface
JZ881 have one interface of TTL.
In standard interface, the plastic socket gap upward, from left to right,1-8 pin in turn, as follows;
Definition of connecting pins and connection method:
Item no PIN Description User’s terminal Remarks
1 VCC +5±0.5V +5V 3V is possible for user

2 GND Power supply/Ground DGND/AGND
3 TXD Serial data transmitting TTL User receiving
4 RXD Serial data receiving TTL User transmitting
5 RXD/RS-485(A) Serial data receiving TXD/RS-485(A) User transmitting
6 TXD/RS-485(B) Serial data transmitting RXD/RS-485(B) User receiving
7 SLE Sleeping control Don't’ open
8 GND Power supply/Ground DGND/AGND
Remarks:
a. JZ881 with sleeping function is not open in default ,if the user need ,then you must say it clearly when
you place an order.
b. The standard power supply is 5V ,if the user need 3V ,then must tell us before place an order.
2) Power supply
JZ881 uses DC power supply with voltage of +5V. It can also share power supply with other equipment,
however, the high quality power supply with desirable ripple factor should be selected. In addition, the reliable
grounding must be used if there is other device in the system equipment. In case of failure to connect with the
earth, it can form its own grounding, but it must be absolutely separated from the municipal electric supply.
3). Power Saving model

JZ881 consists of Sleeping Model and Non-sleeping model. The power is 10Ua when sleeping. The user
need to specify which model you need .
Awaken from Hardware, you can input high level in 7pin, then it sleep.
If don’t need sleep ,then u can connect 7 pin to ground. It will not sleep.
3. JZ881 Parameters Setting

JZ881 have one interface of TTL.
JZ881 main parameters: COM baud rate and verify, RF baud rate, Channel and frequency.
You can change these parameters by our RF Module soft. When RF baud rate is faster than COM baud rate，
One frame Can transmit limitless data. When RF baud rate is not faster than COM baud rate, one frame can
transmit 255 bytes most. You can set the rate according your need.
Two JZ881 communicate must have condition as follow:
1.Their channels (i.e. frequency) are the same.
2.Their RF rates are the same.
3.RF Module Com baud rate and verify is agree with its equipment or PC that it connects with.

Parameters default:
Channel： 1
Interface speed rate：9600BPS
Interface verify：none
Speed rate in air：9600BPS
Channel and frequency list

Channel Frequency Channel Frequency
1 487.5072MHZ 5 490.6942MHZ
2 488.4289MHZ 6 491.1580MHZ
3 489.2329MHZ 7 491.7360MHZ
4 489.9260MHZ 8 492.4388MHZ
Technical specification of JZ881

Modulation mode: FSK
Working frequency: 487--493MHZ
Transmission power: <10mW
Receiving sensitivity: -120dBm
Transmitting current: <45mA
Receiving current: <35mA
Sleeping current: <10mA
Channel speed rate: 1200/2400/4800/9600/19200Bit/s, User can Choose one
Interface speed rate: 1200/2400/4800/9600/19200Bit/s, User can Choose one
Change time for receiving and sending: <10ms
Interface data format: 8E1/8N1/8O1
Power supply: 5±0.5V DC
Working temperature: -20℃～85℃
Working humidity: 10%～90% relative humidity without condensation
Dimension: 39.4mm*24mm*8mm
Attachable Communication with Model: JZ881/JZ882
Model and name

JZ 881 -T
T: TTL interface
Naked board
Company logo

Optional Antenna:
Trouble and solve ways:

NO. Trouble Trouble causes and solve ways
a、Power Line badness touch .
No shine of
1 b、Power is bad.
Indicator light
c、Power line meet in reverse, or diode of polarity protect is bad.
a、Radio is badness touch with PC/terminal.
No transmit or
2 b、Radio with TTL/RS232/RS485 not match terminal.
No receive
c、RX frequency and TX frequency is not same.
a、antenna not match, or touch bad;
Bit error rate
3 b、RF baud rate is not right.
High
c、Power supply ripple is too great.
Indicator light a、Electromagnetism disturb in circumstance.
4
twinkling b、Same frequency disturb in the circumstance.

JZ881 User's Manual

Uploaded by

Copyright:

Available Formats

JZ881 User's Manual

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

JZ881 User's Manual

Uploaded by

Copyright:

Available Formats

JZ881 Micro Power Wireless Module

SHEN JIZHUO TECHNOLOGY CO., LTD

TEL: +86-755-83304518 / 83308451 FAX: +86-755-83302824

Shenzhen Jizhuo technology CO.,LTD,China TEL：+86-755-83304518 http://www.jizhuo.com 1

(Remarks: Jack space between is 2.0 mm.)

Shenzhen Jizhuo technology CO.,LTD,China TEL：+86-755-83304518 http://www.jizhuo.com 2

2.JZ881 interface definition

1 VCC +5±0.5V +5V 3V is possible for user

3). Power Saving model

3. JZ881 Parameters Setting

Shenzhen Jizhuo technology CO.,LTD,China TEL：+86-755-83304518 http://www.jizhuo.com 3

Channel and frequency list

Technical specification of JZ881

Model and name

Shenzhen Jizhuo technology CO.,LTD,China TEL：+86-755-83304518 http://www.jizhuo.com 4

Trouble and solve ways:

Shenzhen Jizhuo technology CO.,LTD,China TEL：+86-755-83304518 http://www.jizhuo.com 5

You might also like