Inspection & Testing Requirements Scope:: Test and Inspection Per

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

INSPECTION & TESTING REQUIREMENTS REVISION: 05/19/2016 CODE NUMBER: PAGE:

SAUDI ARAMCO FORM-175 REPLACES: 06/29/2011 IR043601 1 of 1


SCOPE: VALVE: Low severity, utilities service in cast iron or ductile iron and non-ferrous material

TEST AND INSPECTION PER: SA-175 043000

(1).VISUAL INSPECTION BY BUYER INSPECTION REPRESENTATIVE


(2) REVIEW AND VERIFICATION OF MATERIAL CERTIFICATES AND INSPECTION RECORDS
(3) SUBMISSION OF MANUFACTURING, INSPECTION AND QUALITY RECORDS
0010 *** Pre-Fabrication/Production Requirements Specification Details / Notes:
0020 *** In process inspection & test requirement Specification Details / Notes:
0030
0010
*** R X
Final inspection & test requirements
Pressure Testing of valves
Specification Details / Notes:
Per manufacturer requirements.

0020 R X Drawing and Test Certificate. Certificate of conformity must include testing and material
requirements. (see note 2)

0030 R X Compliance Certificate

0040 R X Product Test Certificate

Notes:
(1) Refer detailed instruction sheet 175 - 000003 of inspection and testing requirements for ideal use of this form.
(2) Inspector shall review approved drawing, MTC, coating report including cure and adhesion tests.

End of IR043601

You might also like