Scribd Logo
Upload

Welcome to Scribd!

  • 26 views

    Concept 2 SD 106 AI

    Uploaded by

    Luiz Oliveira
    The 2SD106A is a dual channel driver for IGBTs up to 1200V. Each of the two isolated drive channels can supply +/-6A of gate current and has a programmable overcurrent protection function. The integrated DC/DC converter supplies 1W of drive power per channel from a 15V DC input. The driver can operate with two independent channels or as a half-bridge driver with internal deadtime generation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Concept 2 SD 106 AI

    Uploaded by

    Luiz Oliveira
    26 views2 pages
    The 2SD106A is a dual channel driver for IGBTs up to 1200V. Each of the two isolated drive channels can supply +/-6A of gate current and has a programmable overcurrent protection function. The integrated DC/DC converter supplies 1W of drive power per channel from a 15V DC input. The driver can operate with two independent channels or as a half-bridge driver with internal deadtime generation.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The 2SD106A is a dual channel driver for IGBTs up to 1200V. Each of the two isolated drive channels can supply +/-6A of gate current and has a programmable overcurrent protection function. The integrated DC/DC converter supplies 1W of drive power per channel from a 15V DC input. The driver can operate with two independent channels or as a half-bridge driver with internal deadtime generation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    26 views2 pages

    Concept 2 SD 106 AI

    Uploaded by

    Luiz Oliveira
    The 2SD106A is a dual channel driver for IGBTs up to 1200V. Each of the two isolated drive channels can supply +/-6A of gate current and has a programmable overcurrent protection function. The integrated DC/DC converter supplies 1W of drive power per channel from a 15V DC input. The driver can operate with two independent channels or as a half-bridge driver with internal deadtime generation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CT-Concept Technology Ltd.

    - 2SD106A - 2 channel driver for IGBTs up to 1200V

    The 2SD 106A is an ultra-compact dual SCALE driver for IGBTs with
    blocking voltages up to 1200V. The two drive channels feature an electrical
    isolation between the control electronics and the power section.

    Each channel is equipped with a programmable Vce monitoring function for


    protection against short circuit and over-current. The driver supplies a
    gate current of +/-6A. The gate voltage is +/-15V. The integrated DC/DC
    converter supplies a drive power of 1 W per channel.
    The interface is compatible to all logic families (5...15V). The driver can be
    operated in two modes: either with two independent driver channels or as a
    half-bridge driver with internal dead-time generation.

    Parameter min typ max unit

    Nominal supply voltage VDC, VDD 15 Vdc


    Supply current without load IDC + IDD 35 mA
    Supply current with maximal load Last IDC + IDD 170 mA
    Output power DC/DC converter (both channels) 2 W
    Efficiency DC/DC converter 85 %
    Delay time input to output (turn on) 300 ns
    Delay time input to output (turn off) 350 ns
    Peak output current (gate current) IG -6 +6 A
    Output rise time 100 ns
    Output fall time 80 ns
    Isolation test voltage (Vac/50Hz/1min) 4000 Vac
    Partial discharge extinction voltage acc. IEC270 >1200 Vpeak
    Creep paht input to output 12,7 mm
    Guaranteed dv/dt immunity (input to output) dV/dt 100 kV/µs
    Operating temperature 2SD106AI -40 +85 °C
    Operating temperature 2SD106AN 0 +70 °C

    http://local/cd-rom/english/products/2SD106/2SD106A.htm (1 von 2) [26.05.1999 22:57:33]


    This datasheet has been downloaded from:

    www.DatasheetCatalog.com

    Datasheets for electronic components.

    You might also like