EPIKOTE™ Resin 874-X-90

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Technical Data Sheet

EPIKOTE™ Resin 874-X-90


Product Description
EPIKOTE Resin 874-X-90 is a 90 %(m/m) solution in xylene of EPIKOTE Resin 874, an epoxy resin derived from bisphenol A and epichlorohydrin
but modified to improve flexibility and to reduce its solution viscosity.

Application Areas/Suggested Uses


EPIKOTE 874-X-90 has been developed for the formulation of high-solids coatings i.e. solvent-borne coatings with solids content in the region of
85-90% (by weight). Typical end-uses include the protection of steel and concrete. Both primers and top coats may be formulated.

Benefits
Highly flexible
High solids coating application
Imparts good corrosion protection
Imparts good water resistance

Sales Specifications

Property Value Unit Test Method

Epoxy Group Content of 100% Resin 3700 - 3900 mmol/kg SMS 2026

Non Volatile Content 89 - 91 % m/m SMS 1524

Viscosity at 25°C 2000 - 4000 mPas* ASTM D445

* 1 mPa.s = 1 cPoise
** as supplied

Typical Properties
Property Value Unit Test Method

Density at 25°C 1.10 kg/L ASTM D4052

Epoxy Molar Mass of 100% Resin 256 - 271 g/eq SMS 2026

Flash Point of Xylene (Abel) 24 °C IP 170

*number of grams of resin containing 1 equivalent of epoxide (Weight per equivalent, WPE, is an alternative term).

Safety, Storage & Handling


Please refer to the MSDS for the most current Safety and Handling information.
EPIKOTE Resin 874-X-90 should be stored at room temperature in conditions such that moisture is excluded, in the original containers kept tightly
closed. Under these conditions the shelf life should be a minimum of three years from date of certification.

EPIKOTE Resin 874-X-90 Generated: March 10, 2021


https://www.hexion.com/en-US/product/epikote-resin-874-x-90 Issue Date:
Revision: 2/1/2007 12:00:00 AM

® and ™ Licensed trademarks of Hexion Inc.


The information provided herein was believed by Hexion Inc. (“Hexion”) to be accurate at the time of preparation or prepared from sources believed to be reliable, but it is the responsibility of
the user to investigate and understand other pertinent sources of information, to comply with all laws and procedures applicable to the safe handling and use of the product and to determine
the suitability of the product for its intended use. All products supplied by Hexion are subject to Hexion’s terms and conditions of sale. HEXION MAKES NO WARRANTY, EXPRESS OR
IMPLIED, CONCERNING THE PRODUCT OR THE MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE OR CONCERNING THE ACCURACY OF ANY INFORMATION PROVIDED
BY HEXION, except that the product shall conform to Hexion’s specifications. Nothing contained herein constitutes an offer for the sale of any product.

Page 1 of 1

You might also like