Dell Premium DES-1423 by - VCEplus 68q-DEMO

DES-1423.VCEplus.premium.exam.
68q
Number: DES-1423
Passing Score: 800
Time Limit: 120 min
File Version: 1.0
Website: https://vceplus.com
VCE to PDF Converter: https://vceplus.com/vce-to-pdf/
Facebook: https://www.facebook.com/VCE.For.All.VN/
Twitter : https://twitter.com/VCE_Plus
DES-1423
Specialist - Implementation Engineer, Isilon Solutions Exam
Version 1.0
www.vceplus.com - Free Questions & Answers - Online Courses - Convert VCE to PDF - VCEplus.com
Exam A
QUESTION 1
When reviewing the actual protection output of N+4/2, what does the number “4” represent?
A. FEC stripe units per stripe

B. Hard drives used per stripe
C. Volume stripes per file system
D. FEC stripe units per file system
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Explanation:
It's OneFS FEC protection nomenclature for our "hybrid" protection polices. More generally, it's written as:
N+M/b
where "N" is the number of data stripe units in a stripe, "M" is the number of FEC stripe units in a stripe, and "b" is the number of stripe units in a stripe which are allowed to reside on the same node.
Reference: https://www.dell.com/community/Isilon/Isi-get-output/td-p/7085467
QUESTION 2 What impact can obsolete drive firmware have on an

Isilon cluster?
A. Reduces administrative overhead and increases performance.

B. Affects redundancy settings and FEC coding.
C. Affects cluster performance or hardware reliability.
D. Increases runtime and cluster performance.
Correct Answer: C
Section: (none)
Explanation
Reference: http://doc.isilon.com/onefs/7.2.0/help/en-us/GUID-398C2422-1CA5-4AE0-8F3D-09F589C82E6E.html
QUESTION 3 What defines FEC link

aggregation mode?
A. Switches to the next interface when the primary interface becomes unavailable.
B. Balances outgoing traffic based on hashed protocol header information that includes source and destination addresses, and VLAN tag.
C. Balances outgoing traffic based on hashed protocol header information that includes source and destination addresses.
D. Balances outbound traffic across all active ports in the aggregated link.
Correct Answer: B
Section: (none)
Explanation
Reference: http://doc.isilon.com/onefs/8.0.0/help/en-us/ifs_r_link_aggregation_methods.html
QUESTION 4 In Isilon OneFS, what is a characteristic of CoW with

snapshots?
A. Used for small changes, inodes, and directories.

B. Avoids the double write penalty.
C. Increases file fragmentation.
D. Used for more substantial changes such as deletes.
Correct Answer: A
Section: (none)
Explanation
Explanation:
With copy on write, as the name suggests, a new write to HEAD results in the old blocks being copied out to the snapshot version first.
Although this incurs a double write penalty, it results in less fragmentation of the HEAD file, which is better for cache prefetch, etc.
Typically, CoW is most prevalent in OneFS and is primarily used for small changes, inodes and directories.
Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h15048-wp-next-gen-data-protection-snapshot-iq.pdf
QUESTION 5 Which OneFS networking option enables Isilon for DNS multitenant
functionality?
A. Groupnet
B. Access zone
C. Pool
D. Subnet
Correct Answer: A
Section: (none)
Explanation
Explanation:
Groupnets are designed to enable multi-tenant DNS support per access zone.
Reference: https://www.dell.com/community/Isilon/Multiple-groupnets-using-the-same-subnet/td-p/7152525
QUESTION 6
A company wants to re-use HD400 nodes into a new cluster with OneFS 8.2.0. What is the minimum number of HD400 nodes required?
A. 3
B. 4
C. 5
D. 6
Correct Answer: A
Section: (none)
Explanation
Reference: https://www.commoncriteriaportal.org/files/epfiles/383-7-148%20ST%20v1.0.pdf (9)
QUESTION 7 On which node does the SSIP

initially reside?
A. Highest node ID
B. Lowest node ID
C. Lowest logical node number
D. Highest logical node number
Correct Answer: B
Section: (none)
Explanation
Explanation:
The SmartConnect Service IP (SSIP) will always reside on the lowest node (that is available) in the cluster (Node1 in most cases). This IP does not move between nodes until the lowest node number goes offline (planned/unplanned).
Reference: http://www.jasemccarty.com/blog/configuring-emc-isilon-smartconnect-part-i-smartconnect-basic/
QUESTION 8 An Isilon cluster has four H500 nodes. Data protection and access are set to N+1 and concurrency respectively. How many drives will be used across the disk pool to protect
a 1 MB file?
A. 4
B. 8
C. 10
D. 11
Correct Answer: A
Section: (none)
Explanation
QUESTION 9
DRAG DROP
Refer to the Exhibit.
In an Isilon environment, match the connectivity type to the proper numerical port reference shown in the exhibit.
Select and Place:
Correct Answer:
Section: (none)
Explanation
QUESTION 10 A company’s Isilon cluster has reached the capacity limit. The cluster consists of eight H500 nodes in a single node pool. Which action can be taken to resolve the capacity issue while new nodes are
being delivered?
A. Activate SmartPools
B. Enable GNA
C. Enable Spillover
D. Release VHS drives
Correct Answer: A
Section: (none)
Explanation
QUESTION 11 Which command shows the node running as the

job coordinator?
A. isi job statistics

B. isi job status
C. isi job status -v
D. isi job statistics view -v
Correct Answer: C
Section: (none)
Explanation
Reference: http://doc.isilon.com/onefs/8.2.0/cli/ifs_r_isi_job_status_view.html
QUESTION 12
What is the recommended number of delegations for a SmartConnect zone name for each SmarConnect zone alias on a cluster?
A. 1
B. 2
C. 3
D. 4
Correct Answer: D
Section: (none)
Explanation
QUESTION 13
Which role-based privilege must be granted to a user before they are allowed to log into the web administration interface?
A. ISI_PRIV_AUTH
B. ISI_PRIV_LOGIN_PAPI
C. ISI_PRIV_CLUSTER
D. ISI_PRIV_LOGIN_CONSOLE
Correct Answer: A
Section: (none)
Explanation
Reference: https://mydocuments.emc.com/pub/en-us/isilon/onefs/7.2.1/ifs-pub-administration-guide-cli/07-br-configuration-access-control.htm
QUESTION 14
A company has a 4-node Isilon H600 cluster dedicated for a high-performance workflow. The administrator wants to convert their cluster SSD strategy from L3 cache to use the SSDs for metadata acceleration.
What should be considered?
A. Migration of data and metadata from the SSDs to HDDs can take hours.
B. Once enabled, the L3 cache cannot be disabled without support assistance.
C. Converting to use SSDs for metadata acceleration turns off prefetching.
D. Deselecting L3 cache for an SSD strategy has no impact to the workflow.
Correct Answer: C
Section: (none)
Explanation
Reference: https://technodocbox.com/69495789-Databases/Storage-tiering-with-dell-emc-isilon-smartpools.html
QUESTION 15
A company has an existing 8-node F800 Isilon cluster with two Z9100 Dell Ethernet back-end switches running on OneFS 8.2.0. The company is planning to add 72 A200 nodes into the cluster. What is the minimum number of additional
switches required to support the configuration?
A. 2
B. 3
C. 4
D. 6
Correct Answer: D
Section: (none)
Explanation
QUESTION 16
An Isilon administrator is receiving “permission denied” while accessing a file on a cluster that an end-user created through an SMB share. The end-user is unable to access the share from their UNIX server.
The end-user “mydomain.com\win_user1” as the login name to access the Microsoft Windows share and then used an LDAP account name of “ux_user1” to access the UNIX mount. The Isilon cluster is joined to the “mydomain.com” Active
Directory domain. In additional, the cluster has an LDAP provider attached to it while the on-disk identity is set as “Native”.
What is a possible cause for this permission issue?
A. Usermapping rule is not present.

B. RFC2307 is not configured on the Active Directory.
C. On-disk identity is set as “Native”.
D. Fake UID generation in the cluster is disabled.
Correct Answer: B
Section: (none)
Explanation
QUESTION 17
A company deployed an Isilon cluster that consists of eight nodes connected to a main production subnet by all available 10GB ports. Later, the company decided to implement a disaster recovery solution with a separate replication subnet.
During the reconfiguration, one of the 10Gb ports from each of the nodes 1-4 was moved into the new pool and SBR was activated.
After activating the replication policies, the administrator noticed that the main production ports on nodes 1-4 reached the bandwidth limit. What is a possible reason for this behavior?
A. Default gateway for the replication subnet has a higher priority value.
B. Default gateway for the replication subnet is not specified.
C. Default gateway for the replication subnet has a lower priority value.
D. Main production ports have a smaller bandwidth limit than replication ports.
Correct Answer: B
Section: (none)
Explanation
QUESTION 18
When configuring NTP on a 4-node Gen 6 cluster, how many chimer nodes are automatically configured on the cluster?
A. 1
B. 2
C. 3
D. 4
Correct Answer: C
Section: (none)
Explanation
Explanation:
By default, if the cluster has more than three nodes, three of the nodes are selected as 'chimers'. Chimers are nodes which can contact the external NTP servers. If the cluster comprises three nodes or less, only one node will be selected as a
chimer. If no external NTP server is set, they will use the local clock instead. The other non-chimer nodes will use the chimer nodes as their NTP servers. The chimer nodes are selected by the lowest node number which is not excluded from
chimer duty.
Reference: https://community.emc.com/community/products/isilon/blog/2019/04
QUESTION 19
An Isilon administrator has four H600 nodes and eight A2000 nodes in the cluster. The file pool policy is configured to have all new data written to the H600 nodes. After a few weeks, the administrator has some concerns about the available
capacity on the H600 nodes.
Which feature should be configured to accept writes, even after the H600 nodes become full?
A. SmartPools
B. GNA
C. Virtual Hot Spare
D. Spillover
Correct Answer: D
Section: (none)
Explanation
Reference: https://groups.google.com/forum/#!topic/isilon-user-group/CpalY7Jy6Xs
QUESTION 20 What is the maximum number of active Swift connections on a 5-node

Isilon cluster?
A. 250 B.
500
C. 750
D. 1000
Correct Answer: C
Section: (none)
Explanation
Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/products/storage-5/docu65240.pdf (10)
QUESTION 21 What is the minimum storage space needed on a datastore to

hold InsightIQ?
A. 50 GB
B. 65 GB
C. 70 GB
D. 85 GB
Correct Answer: C
Section: (none)
Explanation
Reference: https://www.dellemc.com/da-dk/collaterals/unauth/technical-guides-support-information/products/storage/docu93641.pdf (10)
QUESTION 22
In an Isilon Gen 5 environment, what is the maximum number of data stripes for the N+3d:1n1d protection level?
A. 15
B. 16
C. 18
D. 20
Correct Answer: B
Section: (none)
Explanation
Reference: https://community.emc.com/community/products/isilon/blog/2018/01/17/storage-efficiency-protection-overhead-vs-usable-capacity
QUESTION 23
An NFS export is created on the Isilon cluster. No clients are listed in the export rules. What is the client behavior when accessing the export?
A. All clients on the network can access the export.

B. No clients on the network can access the export.
C. Clients can access the export with read-only permissions.
D. Clients that access the export are mapped as root.
Correct Answer: B
Section: (none)
Explanation
QUESTION 24
A company plans to build two Isilon clusters in an active-active disaster recovery environment. The initial requirement is to have one access zone for their Finance department. Which recommended directory structure meets the requirement?
A. Cluster_A:
/ifs/cluster_a/finance
/ifs/cluster_b/finance
Cluster_B:
/ifs/cluster_a/finance
/ifs/cluster_b/finance
B. Cluster_A:
/ifs/finance
/ifs/finance
Cluster_B:
/ifs/finance
/ifs/finance
C. Cluster_A:
/ifs/finance/cluster_a
/ifs/finance/cluster_b
Cluster_B:
/ifs/finance/cluster_a
/ifs/finance/cluster_b
D. Cluster_A:
/ifs/cluster_a
/ifs/cluster_b
Cluster_B:
/ifs/cluster_a
/ifs/cluster_b
Correct Answer: A
Section: (none)
Explanation
QUESTION 25
In an Isilon environment, what is a requirement to join multiple, untrusted Active Directory (AD) authentication sources to an access zone?
A. Must use a common /ifs tree for all access zones.

B. Only one of the AD provider instances can exist in a zone at one time.
C. All untrusted AD provider instances must exist in all access zones.
D. Must only join Active Directory domains in the same forest.
Correct Answer: B
Section: (none)
Explanation
QUESTION 26
A user has recently left the company. After two weeks, the Isilon administrator receive a request to provide some files from the user’s directory called \ifs\user\John_Doe\development. The administrator then discovers that the required files
have been deleted, but a snapshot of the directory is available.
After restoring the files from the snapshot, which additional step is necessary to access the files?
A. Restored files need to be copied from the .snapshot directory to the .restore directory.
B. Permissions of the restored files need to be changed.
C. Restored files need to be copied from the .restore directory to the user directory.
D. Permissions of the user directory need to be changed.
Correct Answer: B
Section: (none)
Explanation
Reference: https://community.emc.com/community/products/isilon/blog/2016/04/25/restoring-from-snapshots
QUESTION 27
An administrator uses a TreeDelete job to delete a large directory. After the job starts, users notice an issue with performance on the cluster. Which recommended action will resolve the performance issue with the job?
A. Modify the running job to use a high impact policy to reduce the amount of time users are impacted. Schedule the job after business hours in the future.
B. Let the job continue to run at the current impact level and schedule future jobs for after business hours so they do not impact users.
C. Modify the running job to use an OFF_HOURS policy that runs at low impact during business hours and medium impact after business hours.
D. Pause the running job and resume after business hours using a high impact policy so that it does not impact users.
Correct Answer: A
Section: (none)
Explanation
QUESTION 28 Which job checks for error

correction codes?
A. IntegrityScan
B. Collect
C. FlexProtect
D. MediaScan
Correct Answer: D
Section: (none)
Explanation
Reference: https://community.emc.com/community/products/isilon/blog/2015/03/25/onefs-hardware-fault-tolerance
QUESTION 29
A company has an Isilon cluster that is joined to an Active Directory (AD) domain. Previously, the company replaced their primary NTP server and added new NTP settings to the Isilon cluster. Now the users are experiencing authentication
failures.
What is a possible reason for this behavior?
A. Cluster and the AD are configured to use the same NTP server.
B. AD is not configured to synchronize its time from the cluster.
C. SMB time is not configured on the cluster to synchronize with the AD.
D. Time between the NTP and the AD differentiates by more than 5 minutes.
Correct Answer: B
Section: (none)
Explanation
Reference: https://www.dell.com/community/Isilon/NTP-and-Active-Directory/td-p/6954393
QUESTION 30 On an Isilon cluster, what is a benefit of using SMB

Server-Side Copy?
A. A secondary copy of a file is written to a backup location to assist SyncIQ operations.

B. A secondary copy of the user’s file is created to allow multiple users to edit the file simultaneously.
C. Allows the file to be copied from one location to another without having to go through the client.
D. Allows members of the Administrator’s group to manage snapshot copies of files.
Correct Answer: C
Section: (none)
Explanation
Reference: http://doc.isilon.com/onefs/8.1.1/help/en-us/ifs_c_smb_server_side_copy.html
QUESTION 31
An Isilon cluster has ten A200 nodes and the node pool data protection level is set to N+2. The data access pattern is currently set to streaming. If the data access pattern is changed to concurrency, how many stripes for a 1 MB file are moved
to the other drive(s)?
A. 0
B. 2
C. 4
D. 6
Correct Answer: B
Section: (none)
Explanation
QUESTION 32
Which OneFS 8.0 feature can be added to an NFSv4 export to assist with seamless failover in the event of a disconnect?
A. Transparent failover
B. Stateless connection
C. Stateful connection
D. Continuous availability
Correct Answer: C
Section: (none)
Explanation
Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h17240_wp_isilon_onefs_nfs_design_considerations_bp.pdf (7)
QUESTION 33 When using NIC aggregation, which configuration is supported in an Isilon Gen 5
environment?
A. ext-1 and ext-2 of node 1 aggregated together

B. ext-1 and 10gige-1 of node 1 aggregated together
C. 10gige-1 port of node 1 and 10gige-1 of node 2 aggregated together
D. ext-1 port of node 1 and ext-1 port of node 2 aggregated together
Correct Answer: D
Section: (none)
Explanation
QUESTION 34 Which command provides cluster statistics including protocol, disk input,
and disk output?
A. isi statistics client

B. isi statistics system
C. isi statistics drive
D. isi statistics protocol
Correct Answer: B
Section: (none)
Explanation
Reference: https://www.dell.com/community/Isilon/isi-statistics-command-document/td-p/7101434
QUESTION 35 What are the methods to join a node to an

Isilon cluster?
A. Configuration wizard, SSH connection, or CLI only

B. Serial connection, Configuration wizard, or CLI only
C. Front panel display, serial cable, or Configuration wizard only
D. Front panel display, Configuration wizard, WebUI, or CLI only
Correct Answer: D
Section: (none)
Explanation
QUESTION 36 What is a requirement when adding Gen 6 nodes to an existing Isilon

Gen 5 cluster?
A. 40 Gb InfiniBand ports
B. Decreased journal size for storage performance
C. Dedicated bootflash drives
D. NVRAM dependency
Correct Answer: A
Section: (none)
Explanation
Reference: https://community.emc.com/community/products/isilon/blog/2017/05/25/next-gen-nodes
QUESTION 37
An Isilon administrator wants to minimize the use of root/admin access to their cluster. In additional, the administrator wants to create specific administrative accounts for specific cluster management activities in different access zones. An
administrator of one zone should be able to view or configure objects in a different zone.
Which action will address the administrator’s requirements?
A. Create ZRBAC role for each zone administrator.

B. Create ZRBAC role for the administrator on all access zone.
C. Create a separate management subnet for each administrator.
D. Create an unique role in the System zone for each administrator.
Correct Answer: A
Section: (none)
Explanation
Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/2019/09/docu95372.pdf (113)
QUESTION 38 An Isilon administrator wants to enable quota notifications for their LDAP users. However, the users’ email IDs are not updated in the LDAP environment. What additional configuration needs to
be performed?
A. Configured the file provider
B. Manage local users and groups
C. Configure the local provider
D. Configure a mapping rule
Correct Answer: D
Section: (none)
Explanation
QUESTION 39 How many Active Directory provider instances can be configured per
access zone?
A. 1
B. 2
C. 3
D. 4
Correct Answer: A
Section: (none)
Explanation
Reference: http://doc.isilon.com/onefs/zzz_archive/cloudpools_staging/ifs_c_active_directory.html
QUESTION 40 Which deduplication phase is excluded from the Dry

Run process?
A. Commonality Detection
B. Sharing
C. Sampling
D. Index Updating
Correct Answer: D
Section: (none)
Explanation
QUESTION 41 What is the recommended networking design approach when

planning subnets?
A. Use a common subnet for data, replication and backup, and use a dedicated subnet for
management.Assign the lowest priority gateway number for the management subnet.
B. Use a common subnet for management, data, replication and backup.Assign a random
priority gateway number for the subnet.
C. Use a common subnet for data and management and a common subnet for replication and
backup.Assign the lowest priority gateway number for the management subnet.
D. Use dedicated subnets for management, data, replication and backup.Assign the lowest
priority gateway number for the data subnet.
Correct Answer: D
Section: (none)
Explanation
Reference: https://community.emc.com/community/products/isilon/blog/2014/11/28/routing-and-isilon-how-to-get-from-a-to-b-and-back-again QUESTION 42 What are the considerations when a NANON configuration is used?
A. Increase frontend I/O ports and aggregated cache.

B. Increases capacity and aggregated cache.
C. Increases frontend network ports and capacity.
D. Increases bandwidth inside the cluster and GbE links.
Correct Answer: C
Section: (none)
Explanation
QUESTION 43
DRAG DROP
What is the correct sequence of actions performed by OneFS to generate an access token?
Select and Place:
Correct Answer:
Section: (none)
Explanation
QUESTION 44 An administrator wants to enable quotas on a group directory in their Isilon cluster. In addition, the administrator wants to monitor and limit the disk usage. Which type of quotas need to
be configured?
A. Advisory
B. Enforcement
C. Accounting
D. Soft
Correct Answer: A
Section: (none)
Explanation
Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h10575-wp-quota-management-with-smartquotas.pdf
QUESTION 45 A systems administrator needs to change the cluster protection from N+3n to N+2n. Which interfaces
can be used?
A. HTTP, WebUI, and CLI

B. SFTP, HTTP, and CLI
C. PAPI, WebUI, and CLI
D. PAPI, WebUI, and SFTP
Correct Answer: A
Section: (none)
Explanation
QUESTION 46 Which HTTPS port number should be used to connect to any node in an
Isilon cluster?
A. 8091
B. 8443
C. 8088
D. 8080
Correct Answer: D
Section: (none)
Explanation
Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/2019/09/docu95378.pdf
QUESTION 47 What is the main functions(s) of the Automatic Replacement Recognition

(ARR) feature?
A. Updates the new drive firmware and adds it to the cluster.

B. Formats the new drive and adds it to the cluster.
C. Formats the drive, adds it to the cluster, and updates the drive firmware.
D. Replaces the new drive support package in the cluster.
Correct Answer: C
Section: (none)
Explanation
Reference: http://doc.isilon.com/onefs/8.1.1/help/en-us/ifs_c_arr.html
QUESTION 48 When manipulating a job, which task can an Isilon

administrator perform?
A. Change impact policies.

B. Update schedules.
C. Pause a job manually
D. Create a custom impact level
Correct Answer: B
Section: (none)
Explanation
QUESTION 49
DRAG DROP
What is the correct sequence of steps in a client read operation?
Select and Place:
Correct Answer:
Section: (none)
Explanation
QUESTION 50 What is a benefit of the Isilon Data
Lake solution?
A. Block-based storage for large databases

B. Maintains simplicity at petabyte scale
C. Scale-up approach for petabyte scale
D. Protects multiple shared repositories at the same level
Correct Answer: B
Section: (none)
Explanation
Reference: https://www.newera-technologies.com/wp-content/uploads/2019/04/isilon-scale-out-data-lake.pdf (9)
QUESTION 51
What is the lowest level of storage pool grouping on an Isilon cluster that is user-configurable and created manually or automatically?
A. Node pool
B. Sub-node pool
C. Neighborhood
D. Disk pool
Correct Answer: D
Section: (none)
Explanation
Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h8321-wp-smartpools-storage-tiering.pdf (10)
QUESTION 52 If configuration auditing is enabled, where are the

audit logs stored?
A. /ifs/.ifsvar/audit/audit.log
B. /var/log/audit_config
C. /ifs/.ifsvar/audit/config/log
D. /var/log/isi_papi_d_audit.log
Correct Answer: B
Section: (none)
Explanation
Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=6&ved=2ahUKEwi__ePklKHmAhURzIUKHYipCVgQFjAFegQIBBAC&url=https%3A%2F%2F2.gy-118.workers.dev/%3A443%2Fhttps%2Fwww.dell.com%2Fcommunity%2Fs%2Fvjauj58549%
2Fattachments%2Fvjauj58549%2Fsolutions-ch%2F482%2F1%2Fh12428-wp-best-practice-guide-isilon-file-system-auditing.pdf&usg=AOvVaw1rEv1R15oV0vd17KjB7VAo (5)
QUESTION 53 Which data access pattern makes the prefetch caching algorithm to be highly
aggressive?
A. Random
B. Parallel
C. Concurrency
D. Streaming
Correct Answer: D
Section: (none)
Explanation
Reference: https://community.emc.com/community/products/isilon/blog/2017/04/05/smartpools-data-layout-prefetch
QUESTION 54 What is the difference between a rolling upgrade and simultaneous upgrade in an
Isilon cluster?
A. Rolling updates take less time to complete.

Simultaneous upgrades take longer to complete.
B. Rolling updates are more disruptive.
Simultaneous upgrades are less disruptive.
C. Rolling updates are less disruptive.
Simultaneous upgrades are more disruptive.
D. Rolling updates are available between all OneFS versions.
Simultaneous upgrades are restricted between certain OneFS versions.
Correct Answer: C
Section: (none)
Explanation
Reference: https://www.dellemc.com/zh-tw/collaterals/unauth/technical-guides-support-information/products/networking-4/docu69989.pdf
QUESTION 55
A Job Engine is running in low space mode and no jobs are in the running state. What is the OneFS8.2 behavior if the AutoBalance job is initiated?
A. Job is started.
B. Job is failed.
C. Job is put into the queue.
D. Job is not started.
Correct Answer: D
Section: (none)
Explanation
Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h12570-wp-isilon-onefs-job-engine.pdf (24)
QUESTION 56
A new Isilon administrator has created their first quota of 100 TB on a directory called “/ifs/Boston-zone/RnD”. Both the Engineering and QA teams have access to this directory. The directory sits on a 4-node H400 node pool. Two
weeks later, the administrator notices that the team’s available disk space is decreasing faster than anticipated for the “/ifs/Boston-zone/RnD” directory.
What is the most likely cause for the decrease in disk space?
A. Quota was configured to include overhead.

B. SmartPools tiering is not enabled.
C. Quota was configured as an Advisory quota.
D. SmartPools global spillover is not enabled.
Correct Answer: A
Section: (none)
Explanation
Reference: https://www.dell.com/community/Isilon/Isilon-Quota-Expand/td-p/7055322
QUESTION 57
An Isilon administrator wants to create a new SMB share to an existing directory structure. The directory contains migrated production data and has an active NFS export. What will happen if the administrator selects the “Apply Windows default
ACLs” option during creation?
A. Windows default ACLs are overwritten by the existing mode bit rights.
B. Existing mode bit rights are overwritten by the Windows default ACLs.
C. Windows default ACLs are merged with the existing mode bit rights.
D. Creation of the SMB share fails due to the existing mode bit rights.
Correct Answer: A
Section: (none)
Explanation
QUESTION 58 You have just completed an upgrade from OneFS 8.0.0.7 to 8.2.0 but have not committed the upgrade. How many days will pass before you are prompted to commit the upgrade
in the WebUI?
A. 5
B. 7
C. 10
D. 14
Correct Answer: C
Section: (none)
Explanation
Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/H15654-wp-isilon-onefs-ndu.pdf (9)
QUESTION 59
A systems administrator must ensure that an IP address never becomes unavailable, even if a node goes offline. What needs to be configured on SmartConnect?
A. Dynamic Allocation
B. Static Allocation
C. Connection Count
D. Round Robin
Correct Answer: B
Section: (none)
Explanation
Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h16463-isilon-advanced-networking-fundamentals.pdf
QUESTION 60 What information is required to enable the LDAP service on an

Isilon cluster?
A. Administrator account and password, and LDAP server name and IP address
B. Port number, cluster name, and an LDAP server IP address
C. Base distinguished name, cluster name, and port number
D. Base distinguished name, port number, and at least one LDAP server
Correct Answer: D
Section: (none)
Explanation
Reference: https://community.emc.com/docs/DOC-25621
QUESTION 61
DRAG DROP
What is the correct hierarchy of the Job elements structure?
Select and Place:
Correct Answer:
Section: (none)
Explanation
Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/h12570-wp-isilon-onefs-job-engine.pdf (6)
QUESTION 62 What are the two ways a FlexProtect

job can start?
A. An at or batch command and Non-event driven

B. Administrative and Even-driven
C. An at or batch command and Alert-driven
D. Administrative and Alert-driven
Correct Answer: D
Section: (none)
Explanation
QUESTION 63 What is the maximum number of nodes that can be added into a node pool in Isilon Gen 6 hardware and
OneFS 8.2.0?
A. 144
B. 252
C. 288
D. 352
Correct Answer: A
Section: (none)
Explanation
Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/products/storage-5/docu84267.pdf (11)
QUESTION 64 When reconciling permissions for clients using UNIX as well as Microsoft Windows systems, what describes the scope of the
permissions?
A. Windows ACLs and POSIX bits have overlapping semantics, but neither completely reflects the other.
B. Windows ACLs have semantics that are a subset of POSIX bits.
C. POSIX bits have semantics that are a subset of Windows ACLs, but Windows ACLs are more extensive.
D. POSIX bits and Windows ACLs are semantically equivalent.
Correct Answer: B
Section: (none)
Explanation
QUESTION 65
You are configuring the network on a Isilon source cluster. The administrator wants to dedicate a new subnet for replication. Which consideration must be addressed for SyncIQ to work properly?
A. SyncIQ must run on a static IP pool.

B. SnapshotIQ must be licensed first.
C. 10GbE ports must be used for replication
D. SyncIQ must run on a dynamic IP pool
Correct Answer: C
Section: (none)
Explanation
QUESTION 66
You have been tasked with designing SyncIQ policies for a systems administrator that requires failover and failback testing. What information should be provided to the administrator?
A. SyncIQ supports failback replication policies that specify directory includes or excludes.
B. Failback replication policies that specify includes or excludes cannot use data encryption.
C. Failback replication policies that specify includes or excludes are not supported with SyncIQ.
D. Failback replication policies that specify includes or excludes cannot use historical snapshots.
Correct Answer: C
Section: (none)
Explanation
Reference: https://mydocuments.emc.com/pub/en-us/isilon/onefs/7.2.1/ifs-pub-administration-guide-cli/15-ifs-br-data-replication-with-synciq.htm
QUESTION 67
Based on the exhibit, what is the actual protection level of the FEATURE.wmv file?
A. N+1
B. N+2
C. N+2n
D. N+2d: 1n
Correct Answer: D
Section: (none)
Explanation
QUESTION 68
Which access information is represented in the exhibit?
A. Real ACL is applied and group “DEES\domain users” has read access to the file
B. Real ACL is applied and group “DEES\sales” has read access to the file
C. Synthetic ACL is applied and group “DEES\sales” has read access to the file
D. Synthetic ACL is applied and user “DEES\john” has read access to the file
Correct Answer: A
Section: (none)
Explanation

Dell Premium DES-1423 by - VCEplus 68q-DEMO

Uploaded by

Copyright:

Available Formats

Dell Premium DES-1423 by - VCEplus 68q-DEMO

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dell Premium DES-1423 by - VCEplus 68q-DEMO

Uploaded by

Copyright:

Available Formats

DES-1423.VCEplus.premium.exam.

Specialist - Implementation Engineer, Isilon Solutions Exam

A. FEC stripe units per stripe

QUESTION 2 What impact can obsolete drive firmware have on an

A. Reduces administrative overhead and increases performance.

QUESTION 3 What defines FEC link

QUESTION 4 In Isilon OneFS, what is a characteristic of CoW with

A. Used for small changes, inodes, and directories.

QUESTION 7 On which node does the SSIP

Refer to the Exhibit.

Select and Place:

QUESTION 11 Which command shows the node running as the

A. isi job statistics

What is a possible cause for this permission issue?

A. Usermapping rule is not present.

QUESTION 20 What is the maximum number of active Swift connections on a 5-node

QUESTION 21 What is the minimum storage space needed on a datastore to

A. All clients on the network can access the export.

A. Must use a common /ifs tree for all access zones.

QUESTION 28 Which job checks for error

What is a possible reason for this behavior?

QUESTION 30 On an Isilon cluster, what is a benefit of using SMB

A. A secondary copy of a file is written to a backup location to assist SyncIQ operations.

A. ext-1 and ext-2 of node 1 aggregated together

A. isi statistics client

QUESTION 35 What are the methods to join a node to an

A. Configuration wizard, SSH connection, or CLI only

QUESTION 36 What is a requirement when adding Gen 6 nodes to an existing Isilon

Which action will address the administrator’s requirements?

A. Create ZRBAC role for each zone administrator.

QUESTION 40 Which deduplication phase is excluded from the Dry

QUESTION 41 What is the recommended networking design approach when

A. Increase frontend I/O ports and aggregated cache.

Select and Place:

A. HTTP, WebUI, and CLI

QUESTION 47 What is the main functions(s) of the Automatic Replacement Recognition

A. Updates the new drive firmware and adds it to the cluster.

QUESTION 48 When manipulating a job, which task can an Isilon

A. Change impact policies.

What is the correct sequence of steps in a client read operation?

Select and Place:

A. Block-based storage for large databases

QUESTION 52 If configuration auditing is enabled, where are the

A. Rolling updates take less time to complete.

A. Quota was configured to include overhead.

QUESTION 60 What information is required to enable the LDAP service on an

What is the correct hierarchy of the Job elements structure?

Select and Place:

QUESTION 62 What are the two ways a FlexProtect

A. An at or batch command and Non-event driven

A. SyncIQ must run on a static IP pool.

You might also like