In Depth Guide 2020 2

IN-DEPTH
CABINET GUIDE
Your Source for Uniquely Versatile Cabinetry Solutions
About Versatile Wood Products
• Versatile Wood Products set down roots in Portland in 1982, drawing on the rich & varied architectural
history of the region to solve the challenges of historic restoration, traditional design, modern adaptations of
materials & energy efficiency
• We build custom face frame cabinets with the cost saving benefits of standard options & the flexibility of
custom details
• We also provide historically accurate wood sash, doors & millwork using techniques originated by 18th &
19th century craftsmen
• Our 40,000 square foot wood shop can tackle projects of any scale ranging from small bathroom remodels to
state of the art custom kitchens or traditional commercial cabinetry
• We specialize in balancing period appropriate architectural design specifications with modern performance
standards
• Our state of the art CNC router & extensive library of knives & patterns can replicate original details &
create innovative solutions to your trickiest design problems
About Our Cabinets

• Traditional American face frame style cabinets
• A variety of door styles & face frame reveals
• 8 standard wood species available, plus custom choices as required
• ¾” plywood box construction
• ½” thick cabinet backs
• All sheet material selections are CARB 2 compliant or Urea-Formaldehyde free
• Variety of interior finishes with custom options
• Fully adjustable ¾” plywood shelving with choice of solid wood edge or matching edge-banding
• ½” bamboo dovetailed drawers with dadoed plywood bottoms
• Blum full extension soft-close bottom mount drawer glides on all drawers & pullout trays
• Pocket screwed & glued face frame construction
• Choice of soft-close European hidden hinges or traditional ball tip or face mount hinges
• Cabinets are made to be scribed to fit your walls for a timeless, built in appearance to maximize use of space &
to prevent the need for fillers
Edition 2.2
503.238.6403 | [email protected]
Warranty
Comprehensive 10 Year Warranty – Versatile Wood Products warrants our cabinetry to be free from defects
in materials and workmanship for 10 years from the date of delivery. This warranty excludes damage due to abuse,
neglect, or improper installation.
Care & Cleaning

Versatile Wood Products crafts superior cabinetry that is designed to look beautiful, function flawlessly and last for
years to come. Our cabinets require little maintenance but the following steps will help your cabinetry last and look
great for even longer.
Basic Cleaning
Using a mild cleaner or soap, wipe down with damp cloth or sponge. Rinse with damp cloth or sponge and wipe dry.
Cabinet Interiors
Clean twice a year or as needed with damp sponge or cloth. Be sure no standing water remains when finished.
Spills
Spills of any kind should be cleaned immediately. Be sure no standing water remains when finished.
Moisture Control
Moisture damage may appear in the following ways: blushing of the topcoat, deterioration of the finish or black
stains in the wood. Follow the steps below to minimize or eliminate potential moisture damage:
Sink Cabinet: Remove water splashes from the front of the cabinet by wiping with a damp cloth.
Coffee Maker or Kettle: Steam directly vented onto overhead cabinetry may blush the finish. If possible,
coffee makers or kettles should be located with overhead clearance.
Dishwasher: Loading or unloading may cause splashing. Remove splashes by wiping with a damp cloth.
Bathroom: Ensure that your bathroom is properly vented. Venting should meet current code.
Seasonal Changes: Excess humidity from wet seasons won’t directly affect the finish but may cause
slight swelling of door and drawer fronts. Lack of moisture in the dry season can cause excessive shrinkage,
splitting or popped joints. The use of a humidifier (dry season) or dehumidifier (wet season) can help
control these situations.
Edition 2.2
Index
Order Guide Design Guide

Custom Base Worksheet 23
Design Standards 1
Custom Upper Worksheet 24
Cabinet Lines 2
Custom Full Height Worksheet 25
Materials & Finishes 3 Standard Base Cabinet Sections 26 - 28
Cabinet Box Options Standard Upper Cabinet Sections 29 - 31
Standard Opening Configurations 4-7 Standard Face Frame Options 32
Crown Moldings 33
Finished Ends 8-9
Cabinet Door Standards 34
Outside Corners 10
Standard Face Frame Sizes 35
Toe Kicks 11 Applied Moldings 36
Cabinet Crown Moldings & Parting Beads 12-13 Bottom Face Frame Reveals 37
Details at Appliances 38
Door & Drawer Details
Details at Refrigerator 39
Door & Drawer Styles 14
Details at Sink 40
Door & Drawer Details 15-16
Details at Casing 41
Door & Drawer Applied Moldings 17 Details at Exterior Corners 42
Hinges 18 Details at J-Box 43
Details at Counter Top & Face Frame 44

Accessories 19-22
Hanging Files 45
Lazy Susans 46
Edition 2.2
Cabinet Quote Request Form
If more than one option applies, check all applicable boxes.
Project Name: Room Name: Date:
1. Cabinet Line (pg 2): The Alice The Stevenson The Landau The Simon
Full Inset Doors & Half Full Overlay Doors Full Inset Doors Half Overlay Doors
Overlay Drawer Faces & Drawer Faces & Drawer Faces & Drawer Faces
2. Materials & Finishes (pg 3):

Exterior Lower: Exterior Upper: Exterior Full Height: Visible Cabinet Interior:
Unfinished Stain Grade Unfinished Stain Grade Unfinished Stain Grade (open or behind glass door)
Unfinished Paint Grade Unfinished Paint Grade Unfinished Paint Grade Match Exterior Finish
Primed Paint Grade Primed Paint Grade Primed Paint Grade Bead Board:
Stained & Finished Stained & Finished Stained & Finished Other:
Interior Lower: Interior Upper: Interior Full Height:

White Melamine White Melamine White Melamine
Birch Birch Birch
Wood Species (if stain grade):

(Be specific eg. grain selection, sapwood, species detail, tight knot etc.)
Finish (if selected):
3. Cabinet Box Options:

Standard Opening Configurations (Check all that apply) (pg 4-7):
36” base w/medium top drawer 36” base w/large top drawer 36” base w/out top drawer 33” base
29 5/8” base 36” base w/bread board 33” base w/bread board
Finished Ends (pg 8-9): Outside Corners (pg 10): Toe Kicks (pg 11): Cabinet Crown Molding
Standard (flat) Standard Corner Standard Recessed Kick (pg 12-13):
V-Joint V-Joint Corner No Kick w/Base Molding Profile:
False Door Engaged Column Corner Molding Height:
False Door - Mitered No Kick - Extended Bottom Crown Spacer:
Rail (base shoe only) Wrapped Not Wrapped
Arched Foot w/Parting Bead
Parting Beads (pg 13):
F950 H953
Shelf Edge at Visible Cabinet Interior:
Matching Edge Band
3
/4” Wood 1 1/2” Wood
Glass Shelves:
Thickness: 1/4” Medicine Cabinet 3
/8” Regular Strength 1
/2” Heavy Duty
Edge: Pencil Polished Flat Polished
Pencil polished not available on shelves narrower than 6.”
Edition 2.2 | PG 1

4. Door & Drawer Details (pg 13-16):
Door Face Style (pg 14): Drawer Face Style (pg 14): Specialty Door & Drawer
Recessed Panel Recessed Panel Panel:
Raised Panel Raised Panel Glass Perforated Metal
Flat Panel - Solid Slab Flat Panel - Solid Slab Other:
(sizes subject to limitations) (sizes subject to limitations)
Flat Panel - Plywood Veneer w/Matching Flat Panel - Plywood Veneer w/
Edge Matching Edge
Door Outside Edge Detail (pg 15): Drawer Outside Edge Detail (pg 15):

Number: Number:
Supplier
Door Pulls (pg 15): Drawer Pulls (pg 15):

Hardware provided by client Hardware provided by client Style/Type
Finger Pull Bevel: 30° 45° Finger Pull Bevel: 30° 45°
Other Other Stop type:
Rubber (standard) Wood
Door Panel Profile (pg 16): Drawer Panel Profile (pg 16):
Number: Number:
Plywood MDF Plywood MDF
Door Inside Frame Profile (pg 17): Drawer Inside Frame Profile (pg 17):
Number: Number:
Applied Molding: Applied Molding:
Custom Rail/Stiles: Custom Rail/Stiles:

Door Grain Direction: Drawer Grain Direction:
Vertical (standard) Horizontal Horizontal (standard) Vertical
Continuous grain pattern requested Continuous grain pattern requested
5. Hinges (pg 18):

Non-Mortised Ball Tip: Self-Close Face Mount: Concealed Soft-Close:
Sterling Nickel (G9) Sterling Nickel (G9) Euro w/factory finish
Nickel (14) Brushed Brass (074)
Antique Brass (AE)
Polished Brass (PB) Mortised:
Dark Antique English (DAE) Chrome
Wrought Iron (W1)
Edition 2.2 | PG 2

6. Accessories (pg 19-22):
Attach cut sheet(s) if other.
Waste Container Pullouts (pg 19): Lazy Susan Inserts (pg 20):
Alternative Series (1) Bin (2) Bin 1. Pie Shape Kidney Shape Half-Moon Shape
Standard Series (1) Bin (2) Bin 2. Polymer Banded Wood Wood Classic
Other
/4” Pullout Bread Board (pg 19):
3
Species for Exposed Front: Oak Alder Maple

Pullout Pantry (pg 20):
Maple Chrome Other
Base Cabinet Pullout (pg 19):
Wood Toe Kick Register (pg 21):
3” 6” 9” Other
Routed Removable
Spice Drawer Insert (pg 19) Pullout Trays (pg 22):
Standard Pullout Tray Pullout Tray w/Scoop
Tray Dividers (pg 19):
1. 12” 18” 1 1/2” Pullout Butcher Block Counter
2. White Chrome Other (on side-mounted glides)
Other
7. Wood Counter Tops:

Wood Counter Top Material & Options: Butcher Block Material & Options:
Paint Grade: Ply w/1 1/2” Wood Edge 1 1/2” Solid Wood Species:
Stain Grade: Ply w/1 /2” Wood Edge
1
1 1/2” Solid Wood Thickness:
Species at Stain Grade: Edge Detail:
Food Safe Finish: Top Coat Oil
8. Tell Us How to Reach You:
Designer/Contractor Name(s):
Contact Number(s):
Contact Email:
Contact Email:
Contact Address:
Street City State Zip
Client Name(s):
Client Number(s):
Client Email:
Client Email:
Site Address:
Street City State Zip
Edition 2.2 | PG 3

9. Other Requests & Highlights:
Need something special? As a custom cabinet builder we are happy to customize any aspect of your cabinetry order
to meet your client’s unique needs. Just let us know what custom features you would like to have quoted on the
page below or sit down with one of our cabinet experts to discuss your goals.

Edition 2.2 | PG 4
QUOTE GUIDE
Design Standards
General Standards
• Standard upper cabinets are 13” deep
• A variety of door styles & face frame reveals
• Shelving edges at closed cabinets have matching edge banding
• Nickel shelf support pins
• 1 adjustable shelf in base cabinets & 2 adjustable shelves in upper cabinets
• Quantity of adjustable shelves in full height cabinets specified by designer
• Finished end panels shipped loose & oversized for site scribe
• Door & drawer species will match face frame unless custom option is specified
• Drawer grain is horizontal & door grain direction is vertical unless specified otherwise
• Drawer cabinet interiors are white melamine
• A magnetic catch is provided for each inset door where non-self closing hinges (such as our mortised or non-
mortised) are specified. Magnetic catches are shipped loose so your installer can locate them relative to the
location of the door pull. The strength of the magnets can be adjusted by partial alignment with plate, which
may be desired for lightweight doors.
• Usable interior drawer space:
ºº Width = face frame opening less 1 5/8”
ºº Depth = cabinet depth less 4” (standard box interiors are: 8”, 11”, 14”, 17”, 20”, 23”, 26”, 29”)
ºº Height = face frame opening less 1 1/2”
• Usable interior width of pullout trays*
ºº Behind full overlay door(s) with Euro hinges:
• Single door - face frame opening less 3”
• Double door - face frame opening less 3 3/4”
ºº Behind inset door(s) with Euro hinges:
• Single door - face frame opening less 3 1/2”
ºº Behind inset door(s) with ball tip hinges:
• Single door - face frame opening less 3”
*Depth for pullouts same as dimensions above. Height requirements vary by design.
Edition 2.2 | PG 1
Cabinet Lines
The Alice The Stevenson
Full Inset Doors & Half Overlay Drawer Faces Full Overlay Doors & Drawer Faces
Full range of hinge options available Euro-style hinge only
The Landau The Simon
Full Inset Doors & Drawer Faces Half Overlay Doors & Drawer Faces
Full range of hinge options available Euro-style hinge or face mount hinge only
Edition 2.2 | PG 2
Materials & Finishes
The following are our standard wood species. The following are our standard stain colors.
Custom options are available upon request. Custom colors & color matching available upon request.
Wood Species Stain Finishes
CVG Fir Clear Lacquer 0000
Eastern Black Walnut Classic Cherry 3110
Hard Maple Warm Chestnut 3114
Paint Grade Poplar Bistro Walnut 3115
Quarter Sawn Sapele (Mahogany) Fruitwood 3118
Quarter Sawn White Oak Burnished Walnut 3119
Select Cherry Walnut Wainscot 3120
Superior Alder Oak Mantel 3123
Ranch Oak 3125
Rustic Grey 3133
Weathered Teak 3134
New Ebony 3135
Edition 2.2 | PG 3
Standard Opening Configurations
36” High Cabinet with Medium Top Drawer
36” High Cabinet with Large Top Drawer
36” High Cabinet without Top Drawer
Notes:
All 36” high cabinet configurations can be interchanged if
horizontal alignment of drawers is not desired.
Combined height of cabinet & toe kick equals 35 1/4”.

A 3/4” counter top will create total height of 36”.
Edition 2.2 | PG 4
33” High Cabinet
29 5/8” High Cabinet with Large Top Drawer
Notes:
All cabinets are 32 1/4” high & 28 7/8” high respectively (pencil drawer is 4 5/8” high).
A 3/4” counter top will create total cabinet height of 33” & 29 5/8” respectively.
Edition 2.2 | PG 5
36” High Cabinet with Bread Board
33” High Cabinet with Bread Board
Notes:
1” opening for bread board.
Edition 2.2 | PG 6
Edition 2.2 | PG 7
Finished Ends
Standard
V-Joint
Available in paint grade only
Edition 2.2 | PG 8
Finished Ends
False Door
Note: See J-Box Details on page 43
False Door - Mitered
Edition 2.2 | PG 9
Outside Corners
Standard Corner V-Joint Corner

Available in paint grade only
Engaged Column Corner
Edition 2.2 | PG 10
Toe Kicks
Standard Recessed Kick
Recessed 3” at front & 1/2” at sides.

No Kick
Wrapped cabinet base with base molding. Extend bottom rail & finished end to floor.
Base molding height required. Bottom rail height required.
Arched Kick with Parting Bead
Shown wrapped at visible ends. Shown at plane change.
Note: Consider aesthetic

issues with full overlay.
Edition 2.2 | PG 11
Cabinet Crown Moldings
Edition 2.2 | PG 12
Cabinet Crown Moldings
Parting Beads
Edition 2.2 | PG 13
Door & Drawer Styles
Recessed Panel Series
Raised Panel Series
Flat Panel Series
Edition 2.2 | PG 14
Outside Edge Detail
Finger Pull
Edition 2.2 | PG 15
Panel Profiles
Inside Frame Profiles
Edition 2.2 | PG 16
Door & Drawer Applied Moldings
Edition 2.2 | PG 17
Hinges
Full Inset Full Inset Half Overlay

Non-Mortised Ball Tip Mortised Ball Tip Self-Closing Face Mount
Available in: Sterling Nickel, Nickel, Available in: Chrome Available in: Sterling Nickel,
Polished Brass, Antique Brass, Brushed Brass
Wrought Iron, Dark Antique English
Full Inset Full Overlay

Concealed Soft-Close Concealed Soft-Close
Available in factory finish only Available in factory finish only
Edition 2.2 | PG 18
Accessories
Waste Container Pullouts
Standard Series Alternative Series

Sleek aluminum frame Wire frame construction
on soft-close slides. on ball bearing slides.
Recommended for full Recommended for
overlay door application behind hinged inset door.
only. Available with 1 or 2 Available with 1 or 2 bins.
bins.
/4” Pullout Bread Board

3
Spice Drawer Inserts
Available with maple, Maple wood insert,
oak or alder finger pull can be customized
front. to fit various drawer
sizes.
Base Cabinet Pullout Tray Dividers
Soft-close pullout. Available in chrome
Available in 3”, 6” or 9” & white.
widths with adjustable
maple shelves & chrome
rails.
Edition 2.2 | PG 19
Accessories
Lazy Susans
Half-Moon Shape Kidney Shape

Recommended for blind corner Recommended for full overlay
base cabinets. Available in application behind hinged
various finishes. Size depends doors. Available in various
on door opening width. finishes. Size depends on door
opening width.
Pie Shape
Full inset applications only.
Attached to revolving door.
Available in various finishes.
Size depends on door opening
width.
Note: Door to face frame gap

may be larger for maximum
adjustability.
Pullout Pantry
Maple Series Chrome Series

Bottom mounted pullout with Stylish all chrome pullout
adjustable maple shelves & mounted at top & bottom for
chrome rails. Recommended maximum stability.
for full overlay application only.
Edition 2.2 | PG 20
Accessories
Toe Kick Registers
Routed
Custom routed toe kick register, available in most materials.
Removable (by others)
Edition 2.2 | PG 21
Accessories
Pullout Trays
Standard Pullout Tray
Pullout Tray with Scoop
All of our pullout trays include:

• 1/2” bamboo box with dovetail joints
• 1/4” birch ply bottom dadoed into sides
• Blum full extension, soft-close slides
Edition 2.2 | PG 22
Design Guide
Edition 2.2
Custom Base Worksheet
Sketch Ideas & Details Here
Edition 2.2 | PG 23
Custom Upper Worksheet
Edition 2.2 | PG 24
Custom Full Height Worksheet
Edition 2.2 | PG 25
Standard Base Cabinet Section
Vertical Section from Side
Edition 2.2 | PG 26
Horizontal Section
Edition 2.2 | PG 27
Vertical Section from Back
Edition 2.2 | PG 28
Standard Upper Cabinet Section
Vertical Section from Side
Edition 2.2 | PG 29
Standard Upper Cabinet Section
Section from Back
Edition 2.2 | PG 30
Standard Upper Cabinets
Horizontal Section
Edition 2.2 | PG 31
Standard Face Frame Options
Edition 2.2 | PG 32
Crown Moldings
Crown to Ceiling Detail
Crown to Door Reveals
Standard Crown Spacer Wrapped Crown Spacer Not Wrapped
Edition 2.2 | PG 33
Cabinet Door Standards
A - Cabinet doors with a panel over 32” (solid or glass) wide
must have a vertical muntin, centered on door, for stability.
B - Cabinet doors over 36” high must have 3 hinges to be

warranted.
C - Finished end over 96” high requires parting bead.
D - Cabinet doors over 48” high must have a horizontal

mullion to be warrantied.
Note: Cabinet accessories, other than standard hardware,

may not be attached to inset cabinet doors to prevent door
misalignment.
Edition 2.2 | PG 34
Standard Face Frame Sizes
A - Face frame top rail: 2 1/4” minimum to receive crown; 3” at full overlay.
B - Intermediary face frames: 1 1/2”.
C - Face frame stiles: 1 1/2” standard; 3” minimum at interior cabinet corners.
D - Face frame bottom rail at upper cabinet: 3” (less is ok depending on under cabinet lighting).
E - Face frame below farm sink: 2 1/4”.
F - 1 1/2” minimum face frame next to farm sink.
G - 3” minimum face frame where cabinet meets wall, also see details at refrigerator.
H - Face frame bottom rail at lower & full height cabinet: 1 1/2”.
I - 3” minimum face frame at end of stove at interior corners; 4” minimum if range is free standing.
Edition 2.2 | PG 35
Applied Moldings
Upper Cabinets
At full overlay At full inset
Lower Cabinets
Bead at inset At full inset
Note: Molding profile as specified by designer.
Edition 2.2 | PG 36
Bottom Face Frame Reveals
Upper Cabinets
Exposed bottom face frame Hidden bottom face frame
Lower Cabinets
Exposed bottom face frame Hidden bottom face frame

See also arched toe kick option See also arched toe kick option
Edition 2.2 | PG 37
Appliance Details
A - Appliance end caps require
minimum 3” face frame for stability
& counter support. If possible,
provide wall blocking for solid
fastening.
B - Minimum 3” face frame next

to appliance at inside corners so
that appliance door clears adjacent
cabinet hardware.
C - Large face frame for clearance

of appliance handle at adjacent
cabinet, see appliance specs.
Check dishwasher specs:

D - Appliance depth may require
deeper cabinets especially if
integrated dishwasher face is to be
inset/flush with adjacent face frame.
These 3 measurements:
E - Counter top thickness;

F - Appliance height;
G - Kick plate height may require
finished counter top height to be
higher than standard 36” when
considering alignment of dishwasher
elements with adjacent cabinets.
Required appliance widths vary,

check specs.
Edition 2.2 | PG 38
Details at Refrigerator
A - Cabinet stops short of corner for
crown.
B - Parting bead at panel-to-cabinet

connection.
C - Allow 1” space at tops & sides of

freestanding refrigerator.
D - Refrigerator cabinet assembly

could be deeper than adjoining
cabinet by counter top depth plus
1
/4” reveal; or counter has to be dog-
eared.
E - 3” minimum face frame at

interior corners, also see appliance
specs for additional requirements for
handle & opening clearances.
Free standing refrigerator
F - See manufacturer
installation specs for
opening size & depth
requirements as well as door
& drawer clearances.
If door cannot open as

required, fridge drawer will
not pull out properly.
Built-in refrigerator Fully integrated refrigerator
Edition 2.2 | PG 39
Details at Sink
A - Check faucet reach & relationship to window sill.
B - Check for available space behind sink for counter mounted fixtures.
C - Minimum of 2 1/4” horizontal face frame below farm sink.
D - Farm sink cabinet: minimum of 3” wider than sink.
Edition 2.2 | PG 40
Details at Casing
A - Cabinet stops short of window to provide

adequate clearance for existing lintel. Consider
finish on wall between casing & cabinet.
B - Cabinet is tight to casing. Lintel & parting

bead butts into cabinet.
Edition 2.2 | PG 41
Details at Exterior Corners
A - Upper cabinets at exterior corners should extend past adjacent
wall by 3/4” minimum to provide return for crown molding.
- or -
Cabinet depth should be less than adjacent wall to receive crown
in full plus 1/2” - see below.
B - Counter top on lower cabinet to extend beyond outside wall
corner at least 2”.
C - Minimum 1/2” clearance in front of crown at outside corner,

if crown projects past outside corner of wall surface, consider
applying crown to entire room or return crown upon itself.
D - Cabinet stops short of doorway to provide adequate

clearance for existing lintel, consider finish on wall between
casing & cabinet.
E - Cabinet is tight against casing. Lintel & parting bead
butt into cabinet end.
Edition 2.2 | PG 42
Details at J-Box
Shallow J-Box
GFCI Outlet
Edition 2.2 | PG 43
Details at Counter Top & Face Frame
A - Backsplash is aligned with cabinet above &

below.
B - Full height cabinet is designed 2” deeper than

lower cabinet to receive full depth of counter.
C - Left stile of tall cabinet is minimum 2 1/4” to

receive counter top dog ear where lower cabinet &
full height cabinet are designed at the same depth.
D - Face frame to receive base or other molding

is minimum 3” for overlay cabinets, 2 1/4” for inset
cabinets.
Edition 2.2 | PG 44
Hanging Files
File Drawer Section
Hanging File Brackets

Mounts to any file drawer. Holds 1/2” file bars. Made of strong 16 gauge steel. Easy to install.
Edition 2.2 | PG 45
Lazy Susans
With Overlay Doors
With Inset Doors
Edition 2.2 | PG 46

In Depth Guide 2020 2

Uploaded by

Copyright:

Available Formats

In Depth Guide 2020 2

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

In Depth Guide 2020 2

Uploaded by

Copyright:

Available Formats

IN-DEPTH

About Our Cabinets

• A variety of door styles & face frame reveals

• 8 standard wood species available, plus custom choices as required

• ¾” plywood box construction

• ½” thick cabinet backs

• All sheet material selections are CARB 2 compliant or Urea-Formaldehyde free

• Variety of interior finishes with custom options

• ½” bamboo dovetailed drawers with dadoed plywood bottoms

• Pocket screwed & glued face frame construction

Care & Cleaning

Order Guide Design Guide

Cabinet Box Options Standard Upper Cabinet Sections 29 - 31

Standard Opening Configurations 4-7 Standard Face Frame Options 32

Door & Drawer Applied Moldings 17 Details at Exterior Corners 42

Hinges 18 Details at J-Box 43

Details at Counter Top & Face Frame 44

2. Materials & Finishes (pg 3):

Interior Lower: Interior Upper: Interior Full Height:

Wood Species (if stain grade):

Finish (if selected):

3. Cabinet Box Options:

Project Name: Room Name: Date:

Door Pulls (pg 15): Drawer Pulls (pg 15):

Custom Rail/Stiles: Custom Rail/Stiles:

5. Hinges (pg 18):

Project Name: Room Name: Date:

Species for Exposed Front: Oak Alder Maple

7. Wood Counter Tops:

Project Name: Room Name: Date:

• A variety of door styles & face frame reveals

• Shelving edges at closed cabinets have matching edge banding

• Nickel shelf support pins

• 1 adjustable shelf in base cabinets & 2 adjustable shelves in upper cabinets

• Quantity of adjustable shelves in full height cabinets specified by designer

• Drawer cabinet interiors are white melamine

• Usable interior drawer space:

ºº Width = face frame opening less 1 5/8”

ºº Height = face frame opening less 1 1/2”

• Usable interior width of pullout trays*

ºº Behind full overlay door(s) with Euro hinges:

• Single door - face frame opening less 3”

• Double door - face frame opening less 3 3/4”

ºº Behind inset door(s) with Euro hinges:

• Single door - face frame opening less 3 1/2”

• Double door - face frame opening less 4 3/4”

ºº Behind inset door(s) with ball tip hinges:

• Single door - face frame opening less 3”

• Double door - face frame opening less 3 3/4”

The Landau The Simon

Wood Species Stain Finishes

CVG Fir Clear Lacquer 0000

Eastern Black Walnut Classic Cherry 3110

Hard Maple Warm Chestnut 3114

Paint Grade Poplar Bistro Walnut 3115

Quarter Sawn Sapele (Mahogany) Fruitwood 3118

Quarter Sawn White Oak Burnished Walnut 3119

Select Cherry Walnut Wainscot 3120

Superior Alder Oak Mantel 3123

Ranch Oak 3125