Specification Sheet: Centrifuge For Petrol and Mineral Oils

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Tamson Instruments

Specification sheet
Centrifuge for Petrol and Mineral Oils
ASTM D91 - ASTM D96 - ASTM D893 - ASTM D1796 - ASTM D2273 - ASTM D2709 - ASTM D2711 - ASTM D4007 -
ASTM D5546 - API 2542 - API 2548 - BS 4385 - ISO 3734 - ISO 9030 - IP 75 - IP 359 - NFMO 7020

Item Unit Centrifuge


P/N
220~240V/50-60Hz 4 31T0200
places for tubes
P/N
110~120V/50-60Hz 4 31T0220
places for tubes
Power [W] 1400
Weight [Kg] 77
Heating Yes
Centrifuge
Dimensions
[mm] 540 x 650 x 400
(L x W x H)
Item Unit Rotor
Swing out rotor for
4 x 100 ml 8”/6” cone- 31T0204
shaped centrifuge tubes
Swing out rotor for
4 x 100 ml 8” cone-shaped 31T0201
centrifuge tubes
Noise level level < 60 dB
R.P.M max [rpm] 3000
Maintenance free motor Radius [mm] 241
Low noise RCF max. [xg] 2425
15 memories + pre-heating programs
Suitable for multiple shaped tubes
Optional gas release system

General - Up to 175 acceleration ramps and up to 175 breaking


The centrifuge is specially designed for water and ramps.
sediment determination, as well as characterization of - Automatic rotor recognition.
used oils and petrol features like demulsibility and - Lid latch lock.
precipitation. Available are accessories for 6” and 8” - Microprocessor controlled.
cone-shaped centrifuge tubes, pear-shaped centrifuge - Induction motor, maintenance free
tubes as well as finger-shaped tubes of 12.5 mL. - Up to 3.000 RPM/ 2-425 RCF (10 RPM steps)

Heating Safety
- Preheating program with rotor spinning and - Optional: gas release system (P/N 31T0216).
temperature is selectable by operator. - Isolation for reducing the heat loss.
- Temperature regulation from ambient +5°C up to - Lid locking and holding.
+80°C (158°F). - Imbalance switch-off.
- Scale Celsius or Fahrenheit. - Manual overriding and lid dropping protection.
- Temperature sensor in the chamber. - Chamber of centrifugation made from stainless steel.
- Viewing and calibration port in the lid.
User friendliness
- Several messages to keep the operator informed
- TFT touch screen, easy to read and values selection. about the device situation.
- Informative display about the progress of stages of - Guard ring between the chamber of centrifugation
centrifugation. and the housing.
- Rotor and adapters list in memory.
- Real values on screen of RCF based on accessories
configuration. Necessary accessories (see next page)
- Timer count up/down, for 0 or at “set RPM/RCF” for
test reproducibility. From 0 to 60 minute, in 1 minute
steps, and hold position.

Tamson Instruments bv 31 105 22 43 73 [email protected] www.tamson.com


Rev 1.1 - "17
Tamson Instruments
Specification sheet
Centrifuge for Petrol and Mineral Oils
Accessories

Necessary accessories for the centrifuge


P/N Picture Description

31T0208 Adapter set for four 6" cone-shaped centrifuge tubes

31T0203 Adapter set for four 8" cone-shaped centrifuge tubes


Centrifuge

31T0205 Adapter set for four pear-shaped centrifuge tubes

31T0212 Adapter set for 28 finger-shaped tubes

31T0210 Adapter set for four finger-shaped tubes

31T0211 Adapter set for 16 finger-shaped tubes

8" 100 ml cone-shaped centrifuge tube, graduated (minimal


09T0015
order quantity is four pieces)

100 ml pear-shaped centrifuge tube for ASTM D4007,


31T0206
graduated (minimal order quantity is four pieces)

6" 100 ml cone-shaped centrifuge tube, graduated (OA)


31T0209
(minimal order quantity is four pieces)

100 ml pear-shaped centrifuge tube for ASTM D2709, ,


31T0227 graduated (minimal order quantity is four pieces). Non
certified, verified.

Tamson Instruments bv 31 105 22 43 73 [email protected] www.tamson.com


Rev 1.1 - "17
Tamson Instruments
Specification sheet
Centrifuge for Petrol and Mineral Oils
Accessories

P/N Picture Description

12.5 ml, finger-shaped centrifuge tubes, graduated


31T0207
(minimum order quantity is 50 pieces)

Stopper for 6" and 8" cone-shaped centrifuge tubes, 100


31T0202
pieces.

8" 100 ml cone-shaped trace sediment centrifuge


Centrifuge
31T0226 tubes, graduated for ASTM D2273 and ASTM 2709 (minimal
order quantity is four pieces)

* Please see specification sheet D1796 for a nine position water bath to pre-heat the cone-shaped centrifuge
tubes

Optional accessories
P/N Gas release system
Preventing toxic fumes and explosion hazard due to gas
31T0216
building up during tempering and centrifuge process:
220~240V/50-60Hz

31T0217 As P/N 31T0216 but voltage range: 110~120V/50-60Hz

ASTM Finger
P/N
D91 D96 D893 D1290 D1796 D2273 D2709 D2711 D4007 D5546 4 16 20
31T0200
or • • • • • • • • • • • • •
31T0220
31T0204 • • • • • • •
31T0201 • • • • • •
31T0208 • •
31T0203 • • • • •
31T0205 • •
31T0212 •
31T0210 •
31T0211 •
09T0015
• • • • • • • •
(min 4)
31T0206

(min 4)
31T0227

(min 4)
31T0209
• •
(min 4)
31T0207
• • •
(min 4)
31T0226
• •
(min 4)
31T0202 • • • • • • • • • •
Optional
31T0216 • • • • • • • • • • • • •
/31T0217

Tamson Instruments bv 31 105 22 43 73 [email protected] www.tamson.com


Rev 1.1 - "17

You might also like