Landscape Drip Application Guide

Landscape Drip Application Guide
A Practical Guide for Designing and Installing Drip Irrigation Systems
The Intelligent Use of Water™

Product Guide
The Efficiency of Drip, Engineered by Rain Bird® Benefits of Xerigation®
The Rain Bird’s low volume irrigation products were coined with the phrase
“Xerigation” in the 1990’s and include drip irrigation and low volume spray
products. The Rain Bird Xerigation system is the most efficient way to water Design flexibility
landscapes.
Elimination of overspray
and runoff
Over the last fifteen years, Rain Bird has been a leader in innovation advances
that customers value. Earlier advances included the Xeri-PopTM, the first efficient High water efficiency
low volume spray with a spray head that retracts out of sight, the self-cleaning
back flush filter that reduces maintenance by automatically flushing out debris, Water is delivered at or near
and the PR Series Pressure Regulating Filter that combined the regulator and the plant root zone
filter into one component reducing the potential for leaks.
Plants stay healthier and
Today, Rain Bird continues the tradition of innovation with the SQ Series Nozzle live longer
and the XF Series Dripline featured below. With the broadest product line,
Rain Bird’s Xerigation systems can be designed to meet any site requirement
providing unmatched quality, efficient water use, and ease of installation.
It is Rain Bird’s long-standing
commitment to engineering and

Featured Rain Bird® Drip Products
quality excellence that sets our
SQ Series Nozzle
For irrigating small areas with dense plantings, the SQ drip irrigation products apart.
Series Nozzle is the most precise and efficient nozzle
available. With built-in pressure compensation and a
unique square spraying pattern, the need for
overlapping is greatly reduced. This means less
overspray, overwatering, and runoff than traditional
nozzles. It also means you need less nozzles,
dramatically reducing your costs and installation time. Demonstrated Water Savings
XF Series Dripline (XFD/XFCV/XFS)

Inland Empire Utilities Agency
The XF Series Dripline is the most flexible, pressure-
(IEUA) Building - Chino, CA
compensating inline emitter tubing available. Its
unique material offers significantly greater flexibility, Solution: Rain Bird developed a
allowing tighter turns with fewer elbows for easier comprehensive irrigation system for
installation. The dual-layered tubing (brown over the IEUA site, including Xerigation
black) provides unmatched resistance to chemicals,
products.
UV damage and algae growth.
Results: 73% less water used than a
comparable facility. First public
Control Zone Kits
agency building to achieve a LEED
Control your zones with preassembled, compact
Platinum Rating.
Rain Bird Control Zone Kits. Two components (valve
and pressure regulating filter) are combined to
create a shorter kit, when compared with the
competition. This allows you to fit more control zone
kits in a single valve box without cramping the work
space inside the box, saving you time and money.
www.rainbird.com
Product Guide
Table of Contents
Product Guide
Anatomy of Xerigation .......................................2
Emission Devices ..................................................4
Control Zone Kits ............................................... 15
Application Guide
Narrow Planting Beds ...................................... 16
Parking Lot ........................................................... 26
Parkways and Walkways ................................. 32
Pots/Baskets/Misc. ............................................ 34
Slopes .................................................................... 42
Street Medians ................................................... 48
Walls ....................................................................... 56
Golf Courses ........................................................ 58
Trees ....................................................................... 64
Xeri-Bird 8
www.rainbird.com 1
Product Guide
Anatomy of Xerigation®/ Landscape Drip System Overview

Broadest Product Line in the Industry
With over 150 products, Rain Bird has the products needed for your application. Systems can be designed to meet any site requirements
and offer many exclusive Rain Bird advances including:
• Flexible XF Series dripline with advanced polymers that provide kink- resistance and reduced coil memory for easier installation
• Compact Control Zones with matched pressure regulator and filter to reduce parts, eliminate potential leak problems, and allow
for fitting more Control Zones in a valve box
• Precision low volume SQ spray nozzles that offer a square wetting pattern and adjust to either 2.5' or 4' throw distances
• Point-source emitters that provide pressure compensation with a wide selection of flow rates and three inlet options (Barb, 1032
threaded, and ½" FPT)
• XFS dripline with Copper Shield Technology™ for use in sub-surface applications under turf or shrub and groundcover areas. The
copper chip effectively protects the emitter from root intrusion
1
Control Zone Kit
“PGA Valve” and “Pressure QF Dripline QF Dripline 45
Regulating Basket Filter” Header Header

45 XF Series Dripline (XFD / XFS / XFCV)
PVC
Xeri-Bug
Xeri-Bug Emitter 6 Operation 46
Emitter XQ ¼"
8
Indicator
6
Distribution Easy Fit Elbow 11
Tubing
1/4” 1/4”
Tubing 9 Tubing XF Series Blank Tubing 33
1
Control Zone Kit Stake ¼" Stake 7
7 Barb XF Series Blank Tubing 33
Easy Fit Tee
Coupling 3 Easy Fit Tee
RWS (Root
Tubing Cutter 24 Watering
Low Pressure Easy Fit XF Series Blank Tubing 5 System) 43
Flow Regulating Female 2
Valve Filter Adapter Tie-Down Purple
44 Stake XF
XF Insertion Tool Xeriman Tool 4 10 Dripline Xeri-Bug Emitter
31
- ½" FPT
SEB-7X 16
Emitter
Valve Easy Fit
Box
6 Female 2
Xeri-Bug Emitter Adapter
XFF Coupling 40
Air Relief XFS Sub-Surface XFD Dripline 23 XFCV Dripline Easy

Valve Kit Dripline with with Heavy-Duty Fit 29
Copper Shield Check Valve 42 Tee
Technology 37
2 www.rainbird.com
Product Guide
ANATOMY
Targeted Watering with Xerigation® / Landscape Drip
Rain Bird Xerigation/Landscape Drip products are made especially for low-volume irrigation systems. By delivering water at or near the
PRODUCTS
plants’ root zones, Rain Bird Xerigation products offer targeted watering with the following advantages:
• Water conservation • Reduced liability (e.g. no overspray, no runoff)

• Greater efficiency (target each plant) • Minimization of weed growth
NARROW BEDS
• Design flexibility; simple construction and easily expandable • Cost savings
• Healthier plants
PARKING LOT
PARKWAYS/
WALKWAYS
SQ Series
PC Emitter Diffuser Cap 13 Square Nozzle ¼" Landscape Dripline 36
PC Module -1032 14
Diffuser
POTS/BASKETS
15 Xeri-Bubbler SPYK 9 Bug 12
PolyFlex 20 Cap
¼" Barb Tee
Riser
Assembly 1/4” 7
XQ ¼" Xeri-Pop 19 XQ ¼" Tubing 30
Distribution Distribution Stake Easy
2 8
Tubing XQ ¼" 8 Tubing
Easy Fit Distribution Fit
Female 3 Easy Fit Flush
¼" Self-Piercing 8 Tubing ¼" Barb
SLOPES
Adapter 17
Barb Connector Connector Coupling Cap
Easy Fit Tee ¼" Barb Connector XF Series Blank Xeri-Bug

Tubing 33 Emitter 6 32
STREET MEDIANS
29
Xeri-Bug
¼" Landscape SQ Series Emitter
9
Dripline 36 Square - 1032
¼" Barb Tee Nozzle 18
Xeri-Bird 8 25
XQ ¼"
Diffuser Multi-Outlet SQ
XQ ¼" Distribution
Bug Distribution
Tubing 8 Emission Device Xeri-Bug Tubing 8 Series
Cap 12 Nozzle
½” FPT x Barb Grey Emitter 6 Adapter
WALLS
Transfer Fitting 39 28
RETRO-1800 6 Outlet 27
Spray-to-Drip Inline Manifold
Retrofit Kit Diffuser Pressure 26
Bug
38 12
Cap Regulator PolyFlex
Riser
GOLF COURSES
1/4” XQ ¼" 1/4”

PCT Distribution Assembly
Bubbler Tubing Tubing
8 Tubing
15
41 7 Stake 7 Stake
Multi-Outlet
Xeri-Bug 35
TREES
* NOTE: Not all products listed in the Product Guide section are in the diagram above
D40685
www.rainbird.com 3
7 7 34 17
8 8 11
Product Guide
29
9 33
Xeri-Bug™ Emitters
Barb Inlet x Barb Outlet
5 10 29
Point-source low-flow emitters for
watering the root zones of plants, 12
25
trees, and container plants.
31 XB-05-PC 12 XB-10-PC XB-20-PC
(0.5 GPH) (1.0 GPH) (2.0 GPH)
Anatomy of a Xerigation® / Landscape Drip System

7
7
26
16 8
4 35
13
18
36
12
Installation Option 1 14 19
Installation Option 2 12
66 20 8
Using a Xeriman Tool, insert 2an emitter 8 For more precise water placement, use
8
15 7 ¼” distribution tubing,8 a ¼” tubing
7
directly into drip tubing or between
6 6
dripline emitters as needed. stake,9and a bug cap.
23 29 PVC
2 8
7 6 17
7 8 8 11 34 34 6 3
1
lack Stripe Tubing 11. Easy Fit Elbow 17. ⁄4” Self-Piercing Barb 22. SEB-7X Emitter Valve Box 28. XPCN Se
ug Emitter 12. Diffuser Bug Cap Connector
29
23. XF Dripline
33
29.
30
Easy Fit T
bing Stake
9
13.
33
PC Emitter Diffuser Cap 18. XPCN Series Nozzle 24. Tubing Cutter 30. Easy Fit F
3
tribution Tubing 14. PC Module-1032 19. Xeri-Pop 25. Xeri-Bird 8 31. Purple L
rb Tee 5
15.
10 PolyFlex
29 Riser Assembly 20. Xeri-Bubbler SPYK 26. Inline Pressure Regulator 32. Xeri-Bug
32
18
6
own Stake 16. Xeri-Bug Emitter - ⁄2” FPT Option 3 21.
Installation
1 Air Relief Valve
12
12 Kit 25
27.
25
6 Outlet
6 Installation
Manifold Option 4 33.
28
XT-700 D
For precise
31 water placement,
12 a barbed The Xeri-Bird 8 provides a centralized
8
7 connector can be punched into 77 location for up to eight emitters. A mix
88 11
www.rainbird.com/drip
7 27
7
distribution tubing. The emitter is then 26
26 of Xeri-Bug and/ or PC emitters can be
placed at the end of the16¼” distribution 88 used to provide the flow rates needed
35 15 15
4
tubing. NOTE: should the emitter for different plant materials. Tentacles
9 become dislodged, unregulated flow of ¼” distribution tubing, ¼” tubing
6
will occur.2 stakes, and bug caps allow for precise
water placement.
23 17
5 29 PVC
Xeri-Black Stripe Tubing 11. Easy Fit Elbow 17. 1⁄4” Self-Piercing Barb 22. SEB-7X Emitter Valve Box 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
Xeri-Bug Emitter 12. Diffuser Bug Cap Connector 23. XF Dripline 29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug
1
⁄4” Tubing Stake 13. PC Emitter Diffuser Cap 18. XPCN Series Nozzle 24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
1
⁄4” Distribution Tubing 14. PC Module-1032 19. Xeri-Pop 25. Xeri-Bird 8 31. Purple Landscape Dripline
20. Xeri-Bubbler SPYK
PolyFlex Riser Assembly Installation Option 5 32. Xeri-Bug Emitter - 1032
1
⁄4” Barb Tee 15. 26. Inline Pressure Regulator
21. Air Relief Valve Kit 27. 6 Outlet Manifold
Tie-Down Stake 16.
8
Xeri-Bug Emitter - 1⁄2” FPT
Drip Tip 33. XT-700 Distribution Tubing
8 The 6 Outlet Manifold provides a
66
27
27 centralized water distribution When using an emitter at the end of the 1⁄4” distribution
77 www.rainbird.com/drip
connection for up to six emission tubing, should the emitter become dislodged (or the
1⁄4” tubing gets cut) unregulated flow will occur.
devices. Connect the ¼” distribution
tubing to one of the outlets. Use a ¼”
tubing stake to ensure precise water
placement. The emitter is placed on
the end of the 1/4” distribution tubing
to regulate the water flow. NOTE:
should the emitter become dislodged,
unregulated flow will occur.
4 www.rainbird.com
Product Guide
ANATOMY
Xeri-Bug™ Emitters
10-32 Thread
Anatomy
12
Inlet
of axXerigation
Barb Outlet
® / Landscape Drip System
Point-source low-flow emitters for
PRODUCTS
13
8
watering
7
the root zones of plants, 18
36
trees, and container plants. 20

14
8
19
12
8
15
8 7
6 6
XB-05PC-1032 XB-10PC-1032
9 XB-20PC-1032
3 (0.5 2GPH) 8
(1.0 GPH) (2.0 GPH)
NARROW BEDS
7 7 34 17
8 8 11 34 6 3
1 33 30
33 30
29
1a 1b 9 33
2
32
32
5
Installation Option 1
10 29
32
18 12
12
25
25
6
28
PARKING LOT
28
Use a 10-32 threaded 31 emitter 12with a The 8Xeri-Bird 8 provides a centralized
erigation® / Landscape Drip System

PolyFlex Riser for point-source 7 77 7 location 27for up to eight emitters. A mix
26
88
26
applications in high foot traffic areas. 16 of Xeri-Bug and/ or15PC emitters
15
can be
24 35
27 4
22
(A pedestrian walking through a flower used to provide the flow rates needed
for different plant materials. Tentacles
15 15
15 bed
6 could pull up a staked emitter or
2
of ¼” distribution tubing, ¼” tubing
otherwise 13 cause misalignment of the
stakes, and bug caps allow for precise
PARKWAYS/
WALKWAYS
PVC
23 29
¼” distribution tubing. If they stepped 18
36 water placement.
one Kit 5. Xeri-Black Stripe Tubing on a PolyFlex
11. Easy Fit Elbow Riser, the 17.
emitter would
⁄ ” Self-Piercing 1
Barb 4 22. SEB-7X Emitter Valve Box 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
Connector 12
Flow Valve 6. Xeri-Bug Emitter
1
stay in place.)
12. Diffuser
14 Bug Cap
18. XPCN Series Nozzle
19 23. XF Dripline 29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug
sure Regulating Filter 7. ⁄4” Tubing Stake 13. PC Emitter Diffuser Cap 24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
emale Adapter20 8. 1
⁄4” Distribution Tubing 14. PC Module-1032 19. Xeri-Pop 8 25. Xeri-Bird 8 31. Purple Landscape Dripline
oupling 9. 1
⁄4” Barb8Tee 15. PolyFlex Riser Assembly 20. Xeri-Bubbler SPYK 26. Inline Pressure Regulator 32. Xeri-Bug Emitter - 1032
Tool 10. Tie-Down Stake 16. 15 Emitter - 1⁄2” FPT
Xeri-Bug 21. Air Relief Valve Kit 27. 6 Outlet Manifold 33. XT-700 Distribution Tubing
8 7
POTS/BASKETS
34. 1⁄4” Barb Connector
9
35. Multi-Outlet Xeri-Bug
36. 1⁄4” Landscape Dripline
Anatomy of a Xerigation / Landscape Drip System
Xeri-Bug™ Emitters 2 ® 8
17
½” FPT Inlet x Barb Outlet
34 34 6 3
13
18
36
Point-source low-flow emitters for 33 30 12
29 14 19
watering the root zones of plants,
SLOPES
20 8
33
trees, and container plants. 8
15
8 7
6 6
9
2 8
32
STREET MEDIANS
Water Source 7 8 8
7
11 34 17
18 34 6 3
1
XBT-10
25 XBT-20 28
12 6
(1.0 GPH) 29 (2.0 GPH) 33
1a 1b 9 33
31 12
3 8
7 27
7 7
5 29
2 10 26 18
8 28
16
16 25
Installation Option
35 1 12
12
Installation Option
15 6
2 15
WALLS
31 12 8 8
Use the ½” FPT inlet emitter connected For more
7 precise water placement, use 27
7 7
to a PVC schedule 80 riser to regulate 7 ¼” distribution tubing, 26a ¼” tubing
2 16 16 8
24 flow to plant4 material. stake,
35 and a bug cap. 15
22
GOLF COURSES
29 21 PVC
6
2
23 29 PVC
17. 1⁄4” Self-Piercing Barb 22. SEB-7X Emitter Valve Box 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
Connector 23. XF Dripline 29.17. Easy Fit Tee
1. Control Zone Kit 5. Xeri-Black Stripe Tubing 11. Easy Fit Elbow 1
⁄4” Self-Piercing Barb 22. SEB-7X Emitter 35.
Valve Multi-Outlet
Box 28.Xeri-Bug
XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
ap 1a. Low Flow18.Valve
XPCN Series Nozzle
6. Xeri-Bug Emitter 24. Tubing Cutter
12. Diffuser Bug Cap 30. Easy Fit Flush Cap
Connector 23. XF Dripline 36. 1⁄4” Landscape Dripline
29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug
1b. Pressure19. Xeri-Pop
Regulating Filter 7. 1⁄4” Tubing Stake 25. Xeri-Bird13.8 PC Emitter Diffuser Cap
31.19. Purple Landscape 24. Tubing Cutter
Dripline 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
2. Easy Fit Female Adapter 8. 1⁄4” Distribution Tubing 14. PC Module-1032 Xeri-Pop 25. Xeri-Bird 8 31. Purple Landscape Dripline
bly 3. 20. Xeri-Bubbler SPYK 26. Inline Pressure Regulator 32.20. Xeri-Bug
Xeri-BubblerEmitter - 1032 26. Inline Pressure Regulator
TREES
Easy Fit Coupling 9. 1⁄4” Barb Tee 15. PolyFlex Riser Assembly SPYK 32. Xeri-Bug Emitter - 1032
FPT 4. Xeriman Tool21. Air Relief Valve Kit
10. Tie-Down Stake 27. 6 Outlet16.
Manifold
Xeri-Bug Emitter - 1⁄2” FPT 33.21. XT-700 Distribution
Air Relief Valve Kit Tubing27. 6 Outlet Manifold 33. XT-700 Distribution Tubing
D49002
www.rainbird.com 5
Product Guide
Multi-Outlet Xeri-Bug™
Six outlet emitter with built-in
pressure compensation. Use for
watering the root zones of plants,
XB-05-6 XB-10-6 XB-20-6

(0.5 GPH) (1.0 GPH) (2.0 GPH)
12
The Multi-Outlet Xeri-Bug provides
centralized water distribution for up to
7
six plants. All six outlets have the same
flow rate. Connect the ¼” distribution
tubing to one of the outlets. Use a ¼”
** tubing stake to ensure precise water
placement. Insert a bug cap at the end
ion® / Landscape Drip System of the tubing.
13
18
36
Multi-Outlet Xeri-Bug™
14 19
12
1/2" FPT inlet x Barb Outlet

8
8
15
8 7
Six outlet emitter with built-in 9
pressure compensation.
2 Use for 8
34
watering the root zones of17 plants, 34 6 3
33 30
29
XBT-05-6 XBT-10-6 XBT-20-6
(0.5 GPH) (1.0 GPH) (2.0 GPH)
32
18
25 12 28
12
Installation Option6 1 Installation Option 2
8
12
12 The Multi-Outlet Xeri-Bug can be 7 Using an Easy Fit Tee and Male Adapter,
8 8
7 mounted on a ½” schedule 80 riser to 27 35 the Multi-Outlet Xeri-Bug can be
77 7
connect to PVC. It provides
26 centralized attached to drip tubing. It provides
16 8 centralized water distribution for up to
35
35 water distribution for up to six plants. 15 15
All six outlets have the same flow rate. six plants. All six outlets have the same
* flow rate. Connect the ¼" distribution
Connect the ¼" distribution tubing to
6 29
one of the outlets. Use a ¼” tubing tubing to one of the outlets. Use a ¼”
stake to ensure precise water tubing stake to ensure precise water
33 placement. Insert a bug cap at the end
placement.
PVC Insert a bug cap at the
end of the tubing. of the tubing.
Connector 23. XF Dripline 29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug
8. XPCN Series Nozzle 24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
9. Xeri-Pop 25. Xeri-Bird 8 31. Purple Landscape Dripline
0. Xeri-Bubbler SPYK 26. Inline Pressure Regulator 32. Xeri-Bug Emitter - 1032
1. Air Relief Valve Kit 27. 6 Outlet Manifold 33. XT-700 Distribution Tubing
6 www.rainbird.com
Product Guide
ANATOMY
6 Outlet Manifold – EMT-6XERI
½” FPT Inlet
Six outlet manifold without pressure
PRODUCTS
compensation. For use with Xeri-Bug or
PC Module emitters, Xeri-Pops, bubblers,
and micro-sprays.
NARROW BEDS
EMT-6XERI
6 18
Installation Option 1 Installation Option 2
8
PARKING LOT
27 19
The 6 Outlet Manifold provides a 27 To incorporate spray heads into your
7 centralized water distribution drip system, connect the Xeri-Pop
connection for up to six emission Micro-Spray to a multi-outlet manifold
devices. Connect ¼" distribution (EMT-6Xeri) via ¼” distribution tubing.
tubing to one of the outlets. Use a ¼” 8
tubing stake to ensure precise water
PARKWAYS/
WALKWAYS
placement. The emitter is placed on
the end of the ¼" distribution tubing to
regulate the water flow.
8
Installation Option 3 Drip Tip
POTS/BASKETS
27
20 Be concious of your run times and application rates.
To incorporate bubblers or micro- Mixing products connected to the EMT-6Xeri can lead
sprays into your drip system, connect to over or under watering.
dscape Drip System the needed product to a multi-outlet

manifold (EMT-6Xeri) via ¼”
distribution tubing.
SLOPES
13
18
36
12
14 19
Xeri-Bird™ 8 Multi-Outlet Emission Device

8
STREET MEDIANS
15
8 7
½” FPT Inlet x Barb Outlet 9
2
The most flexible multi-outlet
8
device.
Contains eight ports that accept
17
34 6 3
Xeri-Bug emitters or PC Modules for

33
29 independent flows from 0.5 to 24gph. 30
XBD-80
WALLS
32
18
12 25
25 Installation Option 1 28
GOLF COURSES
12 6
The Xeri-Bird 8 provides a centralized

8
77 location for up to eight emitters. A mix
7 27
of Xeri-Bug emitters and/ or PC
26
26
88 Modules can be used to provide the 15 15
35
flow rates needed for different plant
materials. Tentacles of ¼" distribution
tubing, ¼” tubing stakes, and bug caps
TREES
allow for precise water placement.

PVC NOTE: Always install the emitters with
the pointed or threaded end UP.
22. SEB-7X Emitter Valve Box 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
www.rainbird.com
23. XF Dripline 29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug 7
24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
Product Guide
Pressure-Compensating Modules
Point-source medium-flow
modules for watering larger PC-05 PC-07 PC-10
shrubs and trees. (5 GPH) (7 GPH) (10 GPH)
Anatomy of a Xerigation® / Landscape Drip System PC-12 PC-18 PC-24

(12 GPH) (18 GPH) (24 GPH)
ation / Landscape Drip System

13
® 18
21
36
12
7
14 19
12
Installation 8Option 1
20 8
13 15
8
13 18 8 8 7
6 6 Using a Xeriman Tool, insert the PC 36 7 For more precise water placement, use
9
6
Module directly into drip tubing

* 12 ¼” distribution tubing, a ¼” tubing
me
63
14 19 2 8
or between dripline emitters as stake, and a bug cap.
ystem
9
8
tsy
7
7 11 needed. Use a PC Diffuser
34 Cap to 17 6
43
ystem
8 8 34 3
8
*
8
15
eliminate squirting.
Sp
8 7
81
33 30
299
91
irD
9 33
2 8
epa
8
3 36
36 34 36 17 12 6
34 3
csd
13
71
5 29 32
* 12
10 12
18
12
31
25
naL
25 28
29
12
12 33 6 30
30
8 7
41
2
3
51
32
8 77 For7 precise water placement, a barbed

/
8 8 31 12
9 The Xeri-Bird 88provides a centralized
® no
21
92
connector can be punched into drip 77 location7 for up to eight

27 emitters. A mix
33
9 9
8
8 7
15
tubing. The PC Module with a PC

28
itag
8
26
26 of Xeri-Bug emitters and/ or PC
16 at the end 88
8
Diffuser3 Cap is then placed

18
34 6 Modules
32 can be used to provide the15 15
6
4 35
15
em
36
18
ireX
6 34 6 3 of the ¼"3 distribution tubing. NOTE: flow rates needed for different plant
43
34 34
25 28
9
12
02
should the emitter become dislodged,

7
33 6
yst
materials. Tentacles of ¼" distribution

g
30
and tlet Xe r
ne
scap ri-Bu
to
34
ripli
36. 1 ulti-O onnec
27
6
a fo
unregulated flow
30 will occur.
8
33
33 33 2 tubing, ¼” tubing stakes, and bug caps
eD
30
pS 21
12
8
61
35. ⁄4” Barb

u
8 allow for precise water placement.

18
19
ym
Dri
34. 1
PVC
33
297
⁄4”L
M
23 27
11
7 7
6
26
6
ota
ape
32
8
13
16 8
7
92
1
ter
Xeri-Black Stripe Tubing 11. Easy Fit Elbow 323518 17. 32

⁄4” Self-Piercing Barb 22. SEB-7X Emitter Valve Box 28.15XPCN Series 15
Nozzle Adapter 34. 1⁄4” Barb Connector
25
dap
2
nA
25 28 Connector
Xeri-Bug Emitter 18 12. Diffuser Bug Cap 18 23. XF Dripline 29. Easy Fit Tee
26
le A
dsc

istrib ter - 10 line
136
17
g
ozz
rip
* 18. XPCN Series Nozzle

bin
PC28Emitter Diffuser Cap 28

utio 32
1 25 Stake
⁄4” Tubing 13. 24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
XT-7 g Em pe D
01
30. asy Fit ries N
ap
n Tu
13
6
8
32. urple Flush C

92
19. Xeri-Pop
Lan
1
31. Purple Landscape Dripline
31. asy Fit ee
⁄4” Distribution Tubing 14. PC Module-1032 25. Xeri-Bird 8

dsc
e
8
29. XPCN S
T
it
88
8
Lan
20. Xeri-Bubbler SPYK 32. Xeri-Bug Emitter - 1032

14
1
⁄4” Barb Tee 15. PolyFlex Riser Assembly 26. Inline Pressure Regulator
2
27
15
i-Bu
00 D
27
E
Xeri-Bug Emitter - 1⁄2” The

FPT 6 Outlet21.
Manifold
Air Reliefprovides
Valve Kit a
28.
8 7 8 27. 6 Outlet Manifold

E
33. XT-700 Distribution Tubing

n ®/
Tie-Down Stake 16.

Xer
5
P
7
26
12
blE
27 centralized
PVC water distribution 27
7
29
77
6
7
33.
6
8
tiF
PVC
15
26 for15up to six emission
ysa .21
connection
x
35
e Bo
E .1
iD
Valv
15 15 15
devices. Connect15 ¼" distribution
1
tor
8
24. F Drip mitter
anif Regula
17. 1⁄4” Self-Piercing Barb 22. SEB-7X Emitter ValvetoBox

tubing 28. XPCN
one of the outlets. Series
Use a ¼”Nozzle Adapter 34. 1⁄4” Barb Connector
3
26. eri-Bir utter

line
34
old
Connector
utle essure
23. EB-7X
23. XF Dripline tubing stake to ensure29.precise Easy Fitwater

Tee 35. Multi-Outlet Xeri-Bug
C
27. Inline P 8
gni
20
ing
d
32
tM
S

buT ettimE ibuT ”4 1 .8
Tub
2
24. Tubing Cutter 30. Easy Fit Flush

a PC Cap
22.
1
placement. The PC Module with 36. 1⁄4” Landscape Dripline

b1
gni
epir
X
r
6O
buT
19. Xeri-Pop
25.
12
tS k uB-ireX 1 .7
25. Xeri-Bird 8 Diffuser Cap is placed31. on Purple Landscape

of the Dripline Drip Tip
eka
the end
16
noit eT braB iT .01
42
calB
tS g rtsiD ”4 1 .9
g
20. Xeri-Bubbler SPYK

rip
ecru
distribution tubing32. Xeri-Bug Emitter

the - 1032
u
26. Inline Pressure ¼" Regulator

n
to regulate
a1
-ireX .6
atS
e
b
33
i
rb
11
nwo
oS r
g Ba
21. Air Relief Valve Kit When using an emitter at the end of the ¼” distribution
m/d
27. 6 Outlet Manifold

6
33. XT-700 Distribution Tubing

zzle
water flow. NOTE: should the emitter

.5
⁄
D-e
18. onnec -Piercin

⁄
etaW
”4⁄
28. XPCN Series Nozzle Adapter

20. eri-Po ries No
34. ⁄4” Barb Connector

1
tubing, should the emitter become dislodged (or the
alve YK
31
19. PCN S or
become dislodged, unregulated flow

Kit
P
22
Reli bler S
t
7
29
C Self
29. Easy Fit Tee Nozzle

.co
35. 1Multi-Outlet Xeri-Bug ¼” tubing gets cut) unregulated flow will occur.
e
zzle28.
Adapter
XPCN Series 34. 1Adapter
⁄4” Barb Connector 34. ⁄4” Barb Connector
p
⁄4”
will occur.
ef V
2
b
17. 1
21. eri-Bu
retl
30. Easy
Easy Fit
FitTee
Flush Cap 1
⁄4” LandscapeXeri-Bug
rainbird.com/drip
29. 36. Multi-Outlet Dripline
bird
X
35. Multi-Outlet Xeri-Bug 35.

iF g tpadA ilpuoC mireX
X
X
Air
31. Easy
Purple
FitLandscape
36. Dripline
nita
ap 30. Flush Cap

re
evla R erus tiF ysa
10
1
⁄4” Landscape Dripline
12
tiK e lF woL .b1
lug
8
29
Vw
ain
32. Purple
Xeri-Bug Emitter - Dripline
1032
e
noZ
pe Dripline
31. Landscape
o
gn ooT na
elam tiF y
8
lort
33. Xeri-Bug
XT-700 Distribution Tubing
w.r
er - 1032
32. Emitter - 1032
9
serP
6. X lyFlex le-103 r Cap

eF
noC
l
itte 1 bly
.a1
T
PC M itter Cap
5
” FP
use
13. iffuse lbow
tion33.
Tubing
XT-700 Distribution Tubing
sem
ww
.1
2
Diff
saE .4
r - ⁄2
7
PC E r Bug
E
Bug iser As
6
12. asy Fit

.2
.3
Po odu
Em
m
8 www.rainbird.com
E
D
11.
200
eri-
94D
14.
15.
3
Product Guide
ANATOMY
Pressure-Compensating Modules
10-32 Thread Inlet x Barb Outlet
Point-source medium-flow
PRODUCTS
modules for watering larger
shrubs and trees.
Landscape Drip System

PC-05-1032 PC-07-1032 PC-10-1032
NARROW BEDS
(5 GPH) (7 GPH) (10 GPH)
13
13 Installation Option181 12
12
25
25 Installation Option 2
PARKING LOT
36
Use a 10-32 threaded emitter with a The Xeri-Bird 8 provides a centralized
PolyFlex Riser for point-source 77 12
location for up to eight emitters. A mix
14
14 19 26
applications in high foot traffic areas. 88
26 of Xeri-Bug emitters and/ or PC
8 through a flower
(A pedestrian walking Modules can be used to provide the
flow rates needed for different plant
15 bed could pull up a staked emitter or
15 materials. Tentacles of ¼" distribution
8 7
PARKWAYS/
otherwise cause misalignment of the
WALKWAYS
tubing, ¼” tubing stakes, and bug caps
¼" distribution tubing. If they stepped allow for precise water placement.
9
Anatomy of a Xerigation® / Landscape D

on a PolyFlex Riser, the emitter would
stay in place.)
2 8
17
POTS/BASKETS
34 6 3
PC Diffuser
29 Installation Option 1
33
13
13
30
Use a PC Diffuser cap to eliminate PC Diffuser Use a PC Diffuser Cap to eliminate

14
14
squirting water when using a PC (Black) squirting water when using a PC
20 Module staked at the end of ¼”
SLOPES
Module staked at the end of a
1/4” distribution tubing or on a 8
distribution tubing or on a PolyFlex
15
15
Riser. 32
PolyFlex Riser.
6 6 18
PC-DIFF-PPL (Purple
25to designate non-potable water) 28
STREET MEDIANS
12 6
2
Pressure Compensating
7 8 8 Threaded
7
Bubblers
11 8 34
7 27
7 7
Rain Bird’s new heavy-duty 26 Installation Option 1
6 pressure compensating bubblers 8
15
29
15
WALLS
35 PCT Bubblers can be mounted on a
1b are designed for a rugged 9 33
½” schedule 80 riser to connect to
environment. Offered in 5 gph, PVC
3
7 gph, and 10 gph models, the PCT-05 PCT-07 PCT-10
bubbler style outlet and medium-
GOLF COURSES
flow
2
options provide more 5 10 29
flexibility for landscape layout. Its
PVC
heavy-duty design is perfect for 12
commercial applications. The 1⁄2”
FPT threaded inlet makes these 31 12
ing Barb devices ideal
22. SEB-7X Emitter Valve Box
for installations 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
TREES
using a PVC23. pipe

XF Dripline
and schedule 80 29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug
7
Nozzle risers. 24. Tubing Cutter 30. Easy Fit Flush Cap 36. ⁄4” Landscape Dripline
1
16
24 25. Xeri-Bird 8 4 31. Purple Landscape Dripline 35
r SPYK 26. Inline Pressure Regulator 32. Xeri-Bug Emitter - 1032
ve Kit www.rainbird.com
27. 6 Outlet Manifold 33. XT-700 Distribution Tubing 9
Product Guide
Diffuser Bug Cap

Prevents bugs and other debris DBC-025
from clogging 1/4” distribution
tubing.
12
8 Use a Diffuser Bug Cap at the end of ¼”
7 distribution tubing to prevent clogging
caused by bugs and other debris.
Xeri-Pop™ Micro-Spray
½” FPT Inlet x Barb Outlet
Pop-up spray for low-volume
irrigation. Ideal for flower beds
and vandal-prone areas.
XBT-400X XBT-600X XBT-1200X
(4 inch pop-up) (6 inch pop-up) (12 inch pop-up)
18
18 Installation Option 1 Installation Option 2
19 The Xeri-Pop Micro-Spray allows you to 19 Connect the Xeri-Pop Micro-Spray to a
27
incorporate spray heads into your drip multi-outlet manifold (EMT-6Xeri) via
8
system. Connect the Xeri-Pop ¼” distribution tubing.
Micro-Spray to drip tubing via ¼”
distribution tubing and a barb
17 connector. 8
Drip Tip
SQ Series, 5 Series MPR, 5 Series Plastic Bubblers, and
8 Series MPR (8H, 8T, and 8Q) nozzles can be installed
on a Xeri-Pop Micro-Spay.
10 www.rainbird.com
Product Guide
ANATOMY
SQ Series Nozzles
The most precise
12 and efficient,
low-volume spray solution for
PRODUCTS
irrigation
8 7 of small areas with
9 dense plantings.
34 6 3
SQ QTR SQ HLF SQ FUL
(Purple) Quarter Pattern (Brown) Half Pattern (Red) Full Pattern
NARROW BEDS
33 30
32
18
18
28
28 Installation Option 1 18 Installation Option 2
PARKING LOT
The SQ can be connected to PE or PVC 19 The SQ can be installed on a Xeri-Pop
8
27 via a PolyFlex Riser via the SQ ADP Spray Head. The Xeri-Pop can be
7 8
adapter. The SQ ADP12 is the SQ ADP connected to PE or PVC. The Xeri-Pop
15
15 adapter preassembled to a 12” PolyFlex
15 can also be connected to drip or drip
Riser. The SQ ADP24 is the SQ ADP line tubing via ¼” tubing and a barb
connector. NOTE: Use one of these
adapter preassembled to a 24” polyfelx 17
PARKWAYS/
WALKWAYS
configurations in each watering zone to
riser.
provide a pop-up run indicator for your
drip system.
e Adapter 34. 1⁄4” Barb Connector

POTS/BASKETS
Dripline 18
1032 Installation Option 3 Installation Option 4
n Tubing 18
The SQ can be installed on a Rain Bird The SQ can be attached to a schedule
1800 Series Spray Head. 80 PVC or PE riser using a PA-8S Plastic
* Shrub Adapter.
*
SLOPES
STREET MEDIANS
Drip Tip
WALLS
With a simple turn of the nozzle to the next preset
stop, the SQ Series Nozzle adjusts from a 2.5 foot
throw to a 4 foot throw.
GOLF COURSES
TREES
www.rainbird.com 11
Product Guide
Xeri-Bubblers™
Spike
Emission device with adjustable
flow and radius. Ideal for shrub
plantings, trees, containers, and
flower beds.
f a Xerigation®® / Landscape Drip System SXB-180-SPYK UXB-360-SPYK
SXB-360-SPYK
13
13
18
18
36
36
12
12
14
14 19
19
20
20
20
88 8
The Xeri-Bubbler
15
15 Spike combines a Connect up to88six Xeri-Bubbler
27 77 Spikes
bubbler with a ¼” tubing stake for via ¼” distribution tubing to a
66 20
precise water placement. Simply 99 multi-outlet manifold (EMT-6Xeri).
connect the Xeri-Bubbler
22 Spike to
88
drip tubing via a barb connector.
7 34
34
34 NOTE: The Xeri-Bubbler Spike comes17
17
11
11 34
34 66 33
with its own barb connector.
33
33 30
30
29
29
33
33
29
29
Xeri-Bubblers™ 32
32
18
18
Barb 12
12
25
25
66
28
28
Emission
31
31 device with1212adjustable
88
flow and radius. Ideal for shrub 77
77 27
27
plantings, trees, containers, and77 26
26
flower beds. 16
16 SXB-180-025 88 SXB-360-025 UXB-360-025
15
15 15
15
35
35
22
** **
29
29 PVC
PVC
8
A barbed connector can be punched 27 Connect up to six Xeri-Bubblers via ¼”
8 7
into distribution tubing. The Xeri- 7 distribution tubing to a multi-outlet
titElbow
Elbow 17. 11⁄4⁄4””Self-Piercing
17. Self-PiercingBarb
Barb 22. SEB-7X
22.
Bubbler is then placed SEB-7X Emitter
at theEmitter Valve
end ofValve Box
the Box 28. XPCN
28. XPCNSeries
SeriesNozzle
NozzleAdapter
Adapter 34. 11⁄4⁄4””Barb
34.
manifold (EMT-6Xeri). Barb Connector
UseConnector
a ¼” tubing
er BugCap
r Bug Cap Connector
Connector 23. XF
23.
¼" distribution tubing.XFDripline
Dripline 29. Easy
29. EasyFit
FitTee
Tee 35.watering.
35.
stake for precise Multi-OutletXeri-Bug
Multi-Outlet Xeri-Bug
itterDiffuser
tter DiffuserCap Cap 18. XPCN
18. XPCNSeries SeriesNozzle
Nozzle
NOTE: should the24.bubbler
24. Tubing
Tubing become
Cutter
Cutter 30. Easy
30. EasyFit
FitFlush
FlushCap
Cap NOTE: should36.the 1bubbler
36. become
⁄4⁄4””Landscape
1
Landscape Dripline
Dripline
odule-1032
dule-1032 19. Xeri-Pop
19. Xeri-Pop dislodged, unregulated Xeri-Birdwill
flow
25. Xeri-Bird
25. 88 occur. 31. Purple
31. PurpleLandscape
LandscapeDriplinedislodged, unregulated flow will occur.
Dripline
ex RiserAssembly
x Riser Assembly 34 20. Xeri-Bubbler
20. Xeri-BubblerSPYK
SPYK 26. Inline
26. InlinePressure
PressureRegulator
Regulator 32. Xeri-Bug
32. Xeri-BugEmitter
Emitter--1032
1032
ug Emitter-- ⁄2⁄2””FPT
ugEmitter 11
FPT 21. Air
21. AirRelief
ReliefValve
ValveKit
Kit 27. 66Outlet
27. OutletManifold
Manifold 33. XT-700
33. XT-700Distribution
DistributionTubing
Tubing
www.rainbird.com/drip Use with 1/2" poly
12 www.rainbird.com
Product Guide
ANATOMY
Xeri-Bubblers™
10-32 Thread
Emission device with adjustable
PRODUCTS
flow and radius. Ideal for shrub
plantings, trees, containers, and
flower beds.
NARROW BEDS
SXB-180-1032 SXB-360-1032 UXB-360-1032
Half Circle Stream Bubbler Full Circle Stream Bubbler Full Circle Umbrella Bubbler
PARKING LOT
*
B*
Use a 10-32 threaded bubbler with a
PolyFlex Riser for point-source
applications in high foot traffic areas.
(A pedestrian walking through a flower
PARKWAYS/
WALKWAYS
bed could pull up a staked bubbler or
15
15
otherwise cause misalignment of the
¼" distribution tubing. If they stepped
on a PolyFlex Riser, the bubbler would
stay in place.)
POTS/BASKETS
Xeri-Sprays™ and Misters
SLOPES
10-32 Thread
Sprays and misters with adjustable
flow and radius. Ideal for ground
STREET MEDIANS
cover, mass plantings, annual
flower beds, and containers.
XS-090 XS-180 XS-360 X-360 ADJMST

Quarter Circle Spray Half Circle Spray Full Circle Spray Full Circle Adjustment Mister
WALLS
** Installation Option 1
GOLF COURSES
Use a 10-32 threaded spray or mister

with a PolyFlex Riser for point-source
applications. Threaded emission
devices on PolyFlex Risers are great for
high foot traffic areas.
15
15
TREES
www.rainbird.com 13
Product Guide
Xeri-Spray™ 360° True Spray

Spike
True micro-spray with full-circle
fan spray pattern. Ideal for ground
flower beds, and containers.
XS-360TS-SPYK
D*
D** D** 8
rigation / Landscape Drip System ® 88
The Xeri-Spray 360° True Spray Spike
D* 8 27
Connect up to six Xeri-Spray 360° True
combines a spray head with a ¼” Spray Spikes via ¼” distribution tubing
13 tubing stake for precise water to a multi-outlet manifold (EMT-6Xeri).
placement. Simply connect18 the 36
Xeri-Spray 360° True Spray Spike to
34 12
34
34 14 drip tubing via a barb connector.
19 NOTE:
20 The Xeri-Spray 360°8 True Spray Spike
8
15 comes with its own barb connector.
8 7
2
Xeri-Spray™ 360° True Spray
8
34 17 6
34 3
Barb or 10-32 Thread
33 30
29
True micro-spray with full-circle
33
fan spray pattern. Ideal for ground
flower beds, and containers. XS-360TS-025 XS-360TS-1032 32
18
25 28
12 6
E**
**
31 12 Installation Option 1 Installation Option 2
88
7 27
27
7 A barbed connector can be punched 77 Connect up to six Xeri-Bubblers via ¼”
8 7 26
into drip tubing. The Xeri-Bubbler is distribution tubing to a multi-outlet
16 8
then placed
35 at the end of the ¼" manifold
15 (EMT-6Xeri).
15 Use a ¼” tubing
distribution tubing. NOTE: should the stake for precise watering. NOTE:
bubbler become dislodged, should the bubbler become dislodged,
unregulated flow will occur. unregulated flow will occur.
2
34
29 PVC
Connector 23. XFInstallation
Dripline Option 3 29. Easy Fit Tee
*
F *
p 24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
19. Xeri-Pop 25.Use
Xeri-Bird 8 threaded bubbler with a31. Purple Landscape Dripline
a 10-32
y 20. Xeri-Bubbler SPYK 26.PolyFlex
Inline Pressure Regulator
Riser for 32. Xeri-Bug Emitter - 1032
point-source applications
PT 21. Air Relief Valve Kit 27.in6high
Outlet Manifold
foot 33. XT-700 Distribution Tubing
traffic areas. (A pedestrian
walking through a flower bed could pull
15
15
up a staked bubbler or otherwise cause
www.rainbird.com/drip misalignment of the ¼" distribution

tubing. If they stepped on a PolyFlex Riser,
the bubbler would stay in place.)
14 www.rainbird.com
Product Guide
ANATOMY
Control Zone Kit Selection Guide
Rain Bird Control Zone Kits provide all the components necessary for on/off control, filtration and
pressure regulation of a low-volume irrigation zone, making them simpler to order and easier to
PRODUCTS
install.
NARROW BEDS
PARKING LOT
XCZ-150-PRB-COM
FLOW: 15 - 40 gpm
FLOW: 15 - 40 gpm
PARKWAYS/
WALKWAYS
XCZ-100-PRB-COM XCZ-100-PRB-LC XCZ-100-PRBR XCZ-100-PRB-MC
FLOW: 3 - 20 gpm FLOW: 3 - 20 gpm FLOW: 3 - 20 gpm FLOW: 3 - 20 gpm
POTS/BASKETS
FLOW: 3 - 20 gpm
SLOPES
XCZ-100-PRF XCZF-100-PRF XACZ-100-PRF XCZF-175-PRF
FLOW: 3 - 15 gpm FLOW: 3 - 15 gpm FLOW: 3 - 15 gpm FLOW: 3 - 10 gpm
FLOW: 3 - 15 gpm 3 - 10 gpm
STREET MEDIANS
XCZ-075-PRF XCZ-LF-100 XACZ-075-PRF
FLOW: 0.2 - 5 gpm FLOW: 0.2 - 5 gpm FLOW: 0.2 - 5 gpm
0.2 - 5 gpm
WALLS
FLOW:
GOLF COURSES
TREES
www.rainbird.com 15
Application Guide
Narrow Planting Bed Next

To a Structure
Sparse Applications
Solution
Xeri-Bird 8 & Xeri-Bug Emitters on a PVC Lateral
Advantages
• Up to 60% water savings
• No overspray damage to structures,
fences or windows
• Targeted watering reduces weed growth
• Manifold design allows for increase/decrease in
future plant water demands
XBD-80 Xeri-Bird 8 Outlet Manifold

XB XX* Xeri-Bug Pressure Compensating
Drip Emitters (0.5 to 2.0 gph)
PRS-050-30 In-stem 30 psi Pressure Regulator
XQ-100 1/4” Distribution Tubing
TS-025 1/4” Tubing Stake
PVC Misc PVC Laterals, Fittings, Glue
XBD-80 PRS-050-30 XB XX
DBC-025 Diffuser Bug Cap
SEB7X Emitter Box (optional)
* Select appropriate emitter flow
TO DO LIST : TIME: (approx.)

 Trench, cut and glue PVC laterals. 1 hr/20'
 Connect lines to water source. 1 hr
 Thread Xeri-Bird 8 Outlet Manifold onto in-stem 30 psi Pressure Regulator, then 5 min/Assembly
connect to PVC tee.
 Attach 1/4” distribution tubing to outlets on Xeri-Bird 8 Outlet Manifold. 3 min/Xeri-Bird 8
 Run 1/4” lines to sparse plantings, stake in place with a Diffuser Bug Cap on the end. 8 min/Stake
 Install the desired Xeri-Bug Emitter inside Xeri-Bird 8 Outlet Manifold. 2 min
 Use an SEB7X Emitter Box as added protection for the Xeri-Bird 8. (optional)
INSTALLATION AND MAINTENANCE TIPS :

 Flush the zone after installation and 2-4 times per year.
 Install XB Emitters in Xeri-Bird 8 Outlet Manifold with self-piercing barb or 1032 thread end up.
 Adjust watering time as seasons/weather changes.
 Leave 6” slack in 1/4” tubing in case of unexpected maintenance.
16 www.rainbird.com
Application Guide
W/CAP
www.rainbird.com
TUBING STAKE
WATER SOURCE
PVC LATERAL
XBD-80
17
PARKWAYS/
TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS ANATOMY
WALKWAYS
Application Guide

To a Structure
Dense Applications
Solution
XFD Dripline Grid
Advantages
• Up to 60% water savings due to zero wind loss
• No runoff = reduced liability in high traffic areas
• No overspray damage to structures, fences or windows
• XFD Dripline is easy to install, resulting in labor savings
Installation
XFD-06-12 XFD Dripline .6 gph @ 12" Spacing

XCZ-100-PRF 1" Xeri Control Zone Kit
ARV050 ½” Air Relief Valve
MDCF Series Easy Fit Compression Fittings/Adapters
OR
XFF Series XFF Dripline 17mm Insert Fittings
TDS-050 Tie Down Stake
1/2"AIR RELIEF VALVE KIT XFF FITTINGS

 Assemble Control Zone Kit and connect to water source. 1hr
 Cut lengths of XF Dripline to build grid in planting area. 10min/50'
 Connect lengths of XF Dripline to Easy Fit Fittings (or XFF Dripline Fittings) to create grid. 25 min/50'
Add 1/2" Air Relief Valve kit to the zone. 5 min
 Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit. 5 min/50'
 Stake XF Dripline grid in place and flush until clean water flows.
 Install planting material.

 Install Air Relief Valve Kit at high point in the system.
 Leave XFD Dripline coil in the sun while preparing for installation.
18 www.rainbird.com
Application Guide
ANATOMY
PRODUCTS
MDCF FITTINGS
or XFF FITTINGS
BUIL
DING
NARROW BEDS
PARKING LOT
PARKWAYS/
WALKWAYS
WATER SOURCE
POTS/BASKETS
W/ XCZ-100-PRF
SLOPES
XFD DRIPLINE
STREET MEDIANS
TIE DOWN STAKES
WALLS
AIR RELIEF VALVE
GOLF COURSES
TREES
www.rainbird.com 19
Application Guide

To a Structure
Dense Applications
Solution
SQ Series Nozzle
Advantages
• Precise square wetting pattern – reducing overspray,
overwatering, and runoff
• Up to 65% water savings due to efficient control of
water placement with pressure compensation
• Adjustable radius or throw in one unit makes design
and installation simple
• Highest distribution uniformity in the industry for short
radius nozzles
Installation
SQ–XXX*
SQ Series Nozzles
PA-8S Plastic Shrub Adapter for use with Schedule 80 Risers
OR
SQ ADP SQ PolyFlex Riser Adapter for use with PFR-FRA
PolyFlex Risers
PFR-FRA
12” PolyFlex Riser with ½” Male Threaded Base Adapter
* Half, full, or quarter nozzles as needed for planting bed SQ NOZZLES

 Trench, cut and glue PVC laterals. 1 hr / 20’
 Thread in Schedule 80 riser, attach PA-8S Adapter and SQ Series Nozzle. 5 min / Assembly
OR
 Thread in PFR-FRA 12” PolyFlex Riser into PVC tee, attach SQ ADP Adapater and 5 min / Assembly
SQ Series nozzle.

 Ensure that all SQ Series Nozzles are adjusted to the appropriate throw distance.
Drip Tip
All SQ Series Nozzles in the same zone should be
adjusted to either 2.5' or 4' throw. DO NOT mix throw
settings in the same zone.
20 www.rainbird.com
Application Guide
www.rainbird.com
BUILDING
SQ NOZZLE ON
or POLYFLEX RISER
SCHEDULE 80 RISER
PVC LATERAL
2.5
21
PARKWAYS/
WALKWAYS
Application Guide
Narrow Beds
Raised Beds
Solution
XFCV Dripline Grid
Advantages
• Targeted watering helps reduce erosion of wall
• XFCV Dripline is easy to install, resulting in labor savings
Installation
XFCV-06-12 XFCV Dripline .6 gph @ 12" spacing

OR
TDS-050 BEND Tie Down Stake
XFF FITTINGS XFCV Dripline

 Assemble Control Zone Kit and connect to water source. 1 hr
 Cut lengths of XFCV Dripline to build grid in crib wall. 10 min/50’
 Connect lengths of XF Series Dripline to Easy Fit Fittings (or XFF Dripline fittings) to create grid. 30 min/50’
Connect to Control Zone Kit.
 Stake XF Series Dripline grid in place and flush until clean water flows. 5 min/10’

 Flush the zone upon installation and 2-4 times per year.
 Leave XFCV Dripline coil in the sun while preparing for installation.
 Break up watering cycles to avoid run off or pooling of water in blocks.
22 www.rainbird.com
Application Guide
www.rainbird.com
WATER SOURCE
XFCV DRIPLINE
TIE DOWN STAKES

MDCF FITTINGS
or XFF FITTINGS
23
PARKWAYS/
WALKWAYS
Application Guide

To a Structure
Combination Applications
Solution
XFD Dripline Grid with Xeri-Bug Emitters
Advantages
• XFD Dripline is easy to install for labor savings
• No overspray damage to structures, fences or
windows
Installation
XFD-06-12 XFD Dripline .6 gph @ 12” Spacing
XCZ-075-PRF 3/4” Xeri Control Zone Kit
OR
ARV050 1/2" AIr Relief Valve
XB XX* Xeri-Bug Pressure Compensating XFD TS-025 XB XX
DT-025 1/4” Distribution Tubing
DCB-025 Diffuser Bug Cap
* Select appropriate emitter flow rate

 Cut lengths of XFD Dripline to build grid in planting area. 10 min/50’
 Connect lengths of XF Series Dripline to Easy Fit Fittings (or XFF Dripline fittings) to create grid, 20 min/50’
add Air Relief Valve
 Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit. 5 min
 Stake XF Series Dripline grid in place. 5 min/10’
 Punch self-piercing barb inlet of Xeri-Bug Emitters into XF Series Dripline, 8 min/Emitter
connect 1/4” tubing to barb outlet and run 1/4” tubing to larger plant.
 Stake tubing in place and attach Diffuser Bug Cap on the end. 3 min/Stake
 Flush system until clean water flows. 2 min

 Supplemental Xeri-Bug Emitters are placed next to larger plants with higher water requirements.
 Install Xeri-Bug Emitters with the Xeriman Tool (XM Tool) for 50% faster installation.
 Leave XF Series Dripline coil in the sun while preparing for installation.
24 www.rainbird.com
Application Guide
ANATOMY
PRODUCTS
WATER SOURCE
NARROW BEDS
XB EMITTER
PARKING LOT
BUILDING
PARKWAYS/
WALKWAYS
POTS/BASKETS
XFD DRIPLINE
TUBING STAKE
W/CAP
TIE DOWN STAKES
SLOPES
STREET MEDIANS
WALLS
AIR RELIEF VALVE

GOLF COURSES
MDCF FITTINGS
or XFF FITTINGS
TREES
www.rainbird.com 25
Application Guide
Narrow Planting Bed/Divider

Sparse Applications
Solution
PolyFlex Riser/Adapter with Xeri-Bug 10-32 Drip
Emitters on a PVC Lateral
Advantages
• No overspray damage to vehicles or parking lot
• Targeted watering reduces weed growth
Installation
PFR/FRA PolyFlex Riser/Adapter

XB XX* 10-32 Xeri-Bug Pressure Compensating Drip Emitters
(0.5 to 2.0 gph) w/ 10-32 Thread
PVC Misc. PVC Laterals, Fittings, Glue
XCZ-075-PRF 3/4" Xeri Control Zone Kit
XB XX 10-32 PFR-FRA

 Assemble Control Zone Kit and position in valve box. 1 hr
 Connect Control Zone to water source and laterals. 1 hr
 Thread PolyFlex Riser/Adapter into PVC tees. 5 min/Tee
 Thread Xeri-Bug Emitter into PolyFlex Riser. 5 min/PFR
 Add planting material and mulch.

 For larger trees use higher flow PC Modules and Diffuser caps to avoid wash out.
 Cut PolyFlex Risers slightly above grade (before installing the Xeri-Bug Emitters) for an "invisible" installation.
 The PolyFlex Riser Adapter (FRA) is made of Marlex®, so no Teflon® tape is needed.
26 www.rainbird.com
Application Guide
www.rainbird.com
PVC LATERAL
XB EMITTER ON RISER
27
PARKWAYS/
WALKWAYS
Application Guide

Dense & Combination Applications
Solution Solution (Combination)

XF Series Dripline Grid SQ Series Nozzle on 1800 Spray Heads with
Swing Assembly on PVC Lateral
Advantages Advantages
• Up to 60% water savings due to zero wind loss • Precise square wetting pattern reduces overspray,
• No overspray damage to vehicles overwatering, and runoff = up to 65% water saving
• No runoff = reduced liability in high traffic areas • Adjustable radius in one unit makes design and
installation simple
• XF is easy to install, resulting in labor savings
• Highest distribution uniformity in the industry for
short radius nozzles
Installation Installation
XFD-06-12 XFD Dripline .6 gph @ 12” Spacing SQ–XXX* SQ Series Nozzles
OR 180X 1800 Series Spray Head with Desired
XFS-06-12 Subsurface Dripline .6 gph @ 12” Spacing Pop-up Height
XCZ-100-PRF 1” Control Zone Kit SA-XXX SA Series Swing Assembly
ARV-050 1/2" Air Relief Valve PVC Misc PVC Laterals, Fittings, Glue
MDCF Series Easy Fit Compression Fittings/Adapters * Half, full, or quarter nozzles as needed for planting bed
OR
TO DO LIST : TO DO LIST :
 Assemble Control Zone Kit and connect to water source. (1 hr)  Trench, cut and glue PVC laterals. (1 hr/20')
 Connect Easy Fit Adapter to Easy Fit Tee for connection to  Connect lines to water source. (1 hr)
Control Zone Kit. (5 min)  Thread 1800 Series Spray Head onto swing assembly then
 Cut lengths of XF Series Dripline to build grid in planting thread the swing assembly into the Slip x Slip x Threaded
area. (10 min/50') Tee PVC fitting. (5 min/Assembly)
 Connect lengths of XFD Dripline to Easy Fit (or XFF Insert)  Cut PVC laterals and glue in Slip x Slip x Threaded Tee
Fittings to create grid. Add Air Relief Valve Kit to the zone. assembly. (5 min/Tee)
(25 min/50')
 Flush system until water flows clear. (As needed)
 Stake XFD Dripline grid in place and flush until clean
 Install SQ Series nozzles on 1800 Spray Heads.
water flows. (5 min/10')
(2 min/Nozzle)
INSTALLATION AND MAINTENANCE TIPS : INSTALLATION AND MAINTENANCE TIPS :

 Flush the zone upon installation and 2-4 times per year.  Flush the zone after installation and 2-4 times per year.
 Install AR Valve Kit at high point in the system.  Adjust watering time as seasons/weather changes.
 Leave XF Dripline coil in the sun while preparing  Ensure that all SQ Series nozzles are adjusted to the
for installation. appropriate throw distance.
28 www.rainbird.com
Application Guide
Solution (Dense)
ANATOMY
AIR RELIEF VALVE
PRODUCTS
TIE DOWN STAKES
NARROW BEDS
MDCF FITTINGS
PARKING LOT
or XFF FITTINGS
PARKWAYS/
WALKWAYS
XF SERIES DRIPLINE
POTS/BASKETS
Solution (Combination)
SLOPES
STREET MEDIANS
1800 SPRAY HEAD W/
SQ SERIES NOZZLE
WALLS
PVC LATERAL
GOLF COURSES
TREES
www.rainbird.com 29
Application Guide

Solution
XF Series Dripline Grid with Xeri-Bug Emitters
Advantages
• No over spray damage to vehicles or parking lot
• XF Series Dripline is easy to install for labor savings
Installation
XFD-06-12 XF Series Dripline .6 gph @ 12” Spacing
OR
TS-025 XFD XB XX ½” Air Relief Valve
* Select appropriate emitter flow rate and barbed connection

 Cut lengths of XF Series Dripline to build grid in planting area. 10 min/50'
 Connect lengths of XF Series Dripline to Easy Fit (or XFF Insert) Fittings to create grid. Add 1/2" Air
20 min/50'
Relief Valve Kit to the zone.
5 min/10'
 Stake XF Series Dripline grid in place.
 Stake 1/4” tubing in place and attach bug cap on the end. 5 min/Stake

 Install 1/2" Air Relief Valve Kit at high point in the system.
30 www.rainbird.com
Application Guide
ANATOMY
PRODUCTS
NARROW BEDS
XB EMITTER
PARKING LOT
PARKWAYS/
WALKWAYS
TUBING STAKE
TIE DOWN STAKES W/CAP
POTS/BASKETS
SLOPES
XF SERIES DRIPLINE
STREET MEDIANS
AIR RELIEF VALVE
WALLS
GOLF COURSES
XFF FITTINGS
TREES
www.rainbird.com 31
Application Guide
Parkway and Walkways

Dense Applications
Solution
Xeri-Pops & SQ Series Nozzles on a
Poly Tubing Lateral
Advantages
•P
recise square wetting pattern reduces overspray,
• Adjustable radius in one unit makes design and
installation simple
Installation
XCZ 075-PRF 3/4” Xeri Control Zone Kit
XP-XX00X
Desired Xeri-Pop Pop-up Height
SQ-XXX* SQ Series Nozzles
XQ-100
1/4” Distribution Tubing
SPB-025
1/4” Self Piercing Barb Connector
XBS
Xeri Black Stripe Poly Tubing
XP-400X SQ NOZZLES
* Half, full, or quarter nozzles as needed for planting bed
TO-DO LIST: TIME: (approx.)

 Trench beds (2-6 inches deep), cut and lay out Xeri Black Stripe Poly Tubing. 30 min/50’
 Punch 1/4” Self Piercing Barb Connector into Xeri Black Stripe Poly Tubing laterals. 10 min/20’
Attach 1/4” tubing to outlet barb and run 1/4” tubing to edge of bed.
 Connect 1/4” tubing to inlet barb on Xeri-Pop. Dig small hole (4” wide x pop up depth) 15 min/
for Xeri-Pop. Xeri-Pop
 Determine desired watering pattern and pick appropriate SQ Series Nozzle. 5 min/Nozzle
 Grasp orange pull ring on top of Xeri-Pop and pull stem up exposing thread area for nozzle. Drop 3 min/Nozzle
30-mesh screen into stem and thread nozzle onto stem.
 Drop Xeri-Pop into hole so the cap is at grade. Fill in dirt around Xeri-Pop so the body is supported 10 min/
in the soil and exit port for nozzle is in the correct position. Xeri-Pop
 Flush lines until clean water flows and install planting material. 2 min

 For seasonal replanting, lift Xeri-Pops out of ground and lay aside. Drip Tip
 Do not disconnect the 1/4” tubing. With a simple turn of the nozzle to the next preset stop, the
 After replanting, reinstall the Xeri-Pops in the planting area. SQ Series Nozzle adjusts from a 2.5' throw to a 4' throw. All
nozzles in the same zone must be adjusted to the same throw.
 Operate Xeri-Pops at 40 psi for optimal performance.
32 www.rainbird.com
Application Guide
www.rainbird.com
XBS TUBING
4 FT.
4 FT.
XERI-POP W/
SQ NOZZLES
33
PARKWAYS/
WALKWAYS
Application Guide
Patio Pots on Separate Zone

Page 1 of 3
Solution
OPTION A: PVC Tubing with Xeri-Bird 8 & Xeri-Bug Emitters
OPTION B: PVC Tubing with 6 Outlet Manifold &
1/4" Landscape Dripline Loop
Advantages
• Xeri-Bird 8 Manifold with PRS offers pressure regulation,
filtration and controlled watering to multiple pots
• Manifold allows for increase/decrease in future plant
requirements
Installation
Option A
OPTION A: Option B:
OPTION B
XBD-80 Xeri-Bird 8 Outlet Manifold EMT-6XERI 6 Outlet Manifold
XB XX* Xeri-Bug Pressure Compensating XQ-100 1/4” Distribution Tubing
Drip Emitters (0.5 to 2.0 gph) XBF-3TEE 1/4” Barb Tee
PRS-050 In-stem 30 psi Pressure Regulator LDQ-08-06-100 1/4” Landscape Dripline
XQ-100 1/4” Distribution Tubing PVC Misc. PVC Laterals, Fittings, Glue
TO-DO LIST: TIME A: TO-DO LIST: TIME B:

Trench (as needed), cut and glue PVC laterals. 1 hr/20’ Trench (as needed), cut and glue PVC laterals. 1 hr/20’
Connect lines to water source. 1 hr Connect lines to water source. 1 hr
Thread Xeri-Bird 8 Outlet Manifold onto 5 min Thread 6 Outlet Manifold onto riser, then 2 min/
in-stem 30 psi Pressure Regulator and connect to PVC tee. EMT-6Xeri
connect to PVC tee. Attach 1/4” distribution tubing to outlets 2 min
Attach 1/4” distribution tubing to outlets 2 min/ on manifold.
on manifold. XBD-80 Run 1/4” lines to pots and connect tubing 8 min/Pot
Run 1/4” lines to Pots, stake in place with 8 min/ to barb tee. Then run 1/4” Landscape
a bug cap on the end. Pot Dripline in a circle inside the pot and
Install the desired Drip Emitter 2 min connect both ends to the barb tee.
inside manifold.*
* Emitter varies by location (0.5 to 2.0 gph)

34 www.rainbird.com
Application Guide
ANATOMY
OPTION A: OPTION B:
TUBING STAKE 1/4" LANDSCAPE
W/ CAP DRIPLINE
PRODUCTS
PVC LATERAL
NARROW BEDS
PARKING LOT
PARKWAYS/
WALKWAYS
1/4" DISTRIBUTION TUBING
POTS/BASKETS
XBD-80 OR EMT-6XERI
SLOPES
STREET MEDIANS
WALLS
GOLF COURSES
TREES
www.rainbird.com 35
Application Guide

Page 2 of 3
Solution
Poly Tubing Lateral with Multi-Outlet Xeri-Bug
Advantages
• Poly tubing flexible for odd shaped areas
• Multi-Outlet Xeri-Bug ensures even watering to
multiple pots
Installation

XB-XX-6* Multi-Outlet Xeri-Bug (6 Outlet PC
Manifold w/ Barb Inlet)
XBS Xeri Black Stripe Poly Tubing
* Select appropriate emitter flow rate TS-025 XB-XX-6 XBS

 Cut and lay out poly lines. 30 min/50’
 Assemble Control Zone Kit and connect to water source and poly lines. 1 hr 15 min
 Punch hole in poly tubing and insert XB-XX-6 manifold. 3 min/XB-XX-6
 Connect 1/4” tubing to XB-XX-6 barb outlets and run tubing to pots. 8 min/Pot
 Stake in place with a bug cap on the end. 3 min/Pot

 For invisible installation, run 1/4” tubing through the drain hole in the bottom of the pot prior to adding plant material.
Drip Tip
Do not run 1/4” tubing more than 5’-8' from the
XB emitter device.
36 www.rainbird.com
Application Guide
XERI-BUG
MULTI-OUTLET
www.rainbird.com
XBS TUBING

W/CAP
TUBING STAKE
37
PARKWAYS/
WALKWAYS
Application Guide

Page 3 of 3
Solution FPO
OPTION A: Poly Tubing Lateral with Xeri-Bug Barb Emitters
OPTION B: Poly Tubing Lateral with 1/4” Landscape
Dripline Loop
Advantages
• Poly tubing flexible for odd shaped areas
• Xeri-Bug Emitters can accommodate the watering
needs of a variety of potted plants
Installation
Option A:
OPTION A Option B:
OPTION B
XCZ-075-PRF 3/4” Xeri Control Zone Kit XCZ-075-PRF 3/4” Xeri Control Zone Kit
XBS Xeri Black Stripe Poly Tubing XBS Xeri Black Stripe Poly Tubing
XQ-100 1/4” Distribution Tubing XQ-100 1/4” Distribution Tubing
XB XX*
Xeri-Bug Pressure Compensating XBF1CONN 1/4” Barb Connector
Drip Emitters (0.5 to 2.0 gph) XBF 3TEE 1/4” Barb Tee
TS-025 1/4” Tubing Stake LDQ-08-06-050 1/4” Landscape Dripline
TO-DO LIST: TIME A: TO-DO LIST: TIME B:

Cut and lay out poly lines. 30 min/50’ Cut and lay out poly lines. 30 min/50’
Assemble Control Zone Kit and connect 1 hr 15 min Assemble Control Zone Kit and connect 1 hr 15 min
to water source and poly lines. to water source and poly lines.
Use Xeri-Bug Emitters’ self-piercing barb 8 min/Pot Insert 1/4” barb connector into poly line, 8 min/Pot
to connect poly lateral tubing with 1/4” connect 1/4” distribution tubing to barb
distribution tubes. Run 1/4” distribution connector, run 1/4” lines to pots and
tubes to pots. connect tubing to barb tee. Then create
Connect distribution tubes to Tubing 3 min/Pot loop by running 1/4” Landscape Dripline
Stake with a bug cap on the end. in a circle inside the pot and connect both
ends to the barb tee.

 Do not run 1/4” tubing more than 5’-8' from the XB emitter device.
38 www.rainbird.com
Application Guide
ANATOMY
OPTION A: OPTION B:
TUBING STAKE 1/4" LANDSCAPE
W/ CAP DRIPLINE
PRODUCTS
NARROW BEDS
PARKING LOT
XBS TUBING
PARKWAYS/
WALKWAYS
POTS/BASKETS
SLOPES
STREET MEDIANS
XB EMITTER or
BARB CONNECTOR
WALLS
GOLF COURSES
TREES
www.rainbird.com 39
Application Guide
Hanging Baskets
Solution
OPTION A: Poly Tubing Lateral with Xeri-Bug Emitters
OPTION B: Poly Tubing Lateral with 1/4” Landscape
Dripline Loop
Advantages
• Targeted watering in baskets
• Eliminates hand watering
• Connect to irrigation timer for consistent
automatic watering
Installation
OPTION A:
Option A OPTION
OptionB:B
XCZ-075-PRF 3/4” Control Zone with 40 psi XCZ-075-PRF 3/4” Xeri Control Zone Kit
Pressure Regulator XBS Xeri Black Stripe Poly Tubing
XBS Xeri Black Stripe Poly Tubing XQ-100 1/4” Distribution Tubing
XB XX* Xeri-Bug Pressure Compensating XBF1CONN 1/4” Barb Connector
Drip Emitters (0.5 to 2.0 gph) XBF 3TEE 1/4” Barb Tee
XQ-100 1/4” Distribution Tubing LDQ-08-06-100 1/4” Landscape Dripline
XM Tool XM Installation Tool
Electrical Staples 1/2” Metal Staples
TS-025 1/4” Tubing Stake TO-DO LIST: TIME B:
DCB-025 Diffuser Bug Cap Assemble Control Zone Kit at water 1 hr
source and connect poly tube laterals
* Select appropriate emitter flow rate and barbed connection
to edge of structure.
TO-DO LIST: TIME A: Elbow poly lateral in vertical line up 40 min/50’
structure to eaves. Staple poly lateral
Assemble Control Zone Kit at water source 1 hr to structure.
and connect poly tube laterals to edge
of structure. Staple poly lateral along underside 30 min/50’
of eaves.
Elbow poly lateral in vertical line up 40 min/50’
structure to eaves Staple poly lateral Use XM Tool to punch 1/4” barb connector 10 min/
to structure. into poly lateral above baskets. Basket
Staple poly lateral along underside of eaves. 30 min/50’ Insert 1/4" barb connector into poly line, 8 min/Basket
connect 1/4" distribution tubing to barb
Use XM Tool to punch Xeri-Bug Emitters 10 min/ connector, run 1/4" lines to baskets and
into poly lateral above baskets. Basket connect tubing to barb tee. Then create
Connect short length of 1/4” tubing to 8 min/Basket loop by running 1/4" Landscape Dripline
Xeri-Bug Emitters and stake in basket. in a circle inside the basket and connect
Add bug caps to ends of 1/4” lines. both ends to the barb tee.

 Use XM Tool for faster installation of Xeri-Bug Emitters and 1/4” barb connectors.
 Break up watering cycles to avoid excess drainage.
40 www.rainbird.com
Application Guide
ANATOMY
PRODUCTS
BUILDING
NARROW BEDS
PARKING LOT
XBS TUBING OPTION A: OPTION B:
(INSTALLS UNDER TUBING STAKE 1/4" LANDSCAPE
PARKWAYS/
WALKWAYS
ROOF EAVES) W/ CAP DRIPLINE
POTS/BASKETS
SLOPES
STREET MEDIANS
XB EMITTER or
WALLS
BARB CONNECTOR GOLF COURSES
TREES
www.rainbird.com 41
Application Guide
Slopes
Sparse Applications
Solution
Advantages
• Xeri-Bird 8 manifold with PRS offers pressure
regulation, filtration and controlled watering
to multiple plants
• Manifold allows for increase/decrease in future
plant water demands
Installation

DCB-025 Diffuser Bug Caps
* Select appropriate emitter flow rate and barbed or threaded connection

Connect lines to water source.
 1 hr
 Thread Xeri-Bird 8 Outlet Manifold onto in-stem 30 psi Pressure Regulator, 5 min/Assembly
then connect to PVC tee.
 Attach 1/4” distribution tubing to outlets on Xeri-Bird 8 Outlet Manifold. 3 min/XBD-80
 Run 1/4” lines to plants, stake in place with a Diffuser Bug Cap on the end. 8 min/Stake
 Install the desired Xeri-Bug Emitter inside Xeri-Bird 8 Outlet Manifold. 2 min
 Use and SEB7X Emitter Box as added protection for the Xeri-Bird 8. (optional)

 Flush the zone after installation and 2-4 times per year. Drip Tip
 Install Xeri-Bug Emitters in Xeri-Bird 8 Outlet Manifold with self- Do not run 1/4” tubing more than 5’-8' from the XBD-80.
piercing barb or threaded end up.
 Leave 6” slack in 1/4” tubing next to manifold in case of
unexpected maintenance.
42 www.rainbird.com
Application Guide
www.rainbird.com
W/CAP
TUBING STAKE
FOR THIS IMAGE
NEED INFORMATION
PVC LATERAL
XBD-80
43
PARKWAYS/
WALKWAYS
Application Guide
Slopes
Dense or Combination Applications
Solution
Advantages
• Low maintenance results in labor savings
• XF Dripline is easy to install, resulting in labor
savings
Installation
XFCV-06-12 XFCV Dripline w/Heavy-Duty Check Valve
(.6 gph @ 12” Spacing)
XCZ-100-PRF 1” Xeri Control Zone Kit
OR
XFF Series XF Dripline 17mm Insert Fittings
XB XX* Xeri-Bug Pressure Compensating ½” Air Relief Valve XFF FITTINGS
XM Tool Xeriman Installation Tool

Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit.
 5 min
 Cut lengths of XF Series Dripline to assemble grid in planting area. 10 min/50'
 Connect lengths of XF Series Dripline to Easy Fit Fittings (or use XF Dripline fittings) 25 min/50'
to create grid. Add 1/2" Air Relief Valve Kit to the zone.
 Insert Xeri-Bug Emitters into XF Series Dripline to provide supplemental watering for larger plants. 3 min/Emitter
 Stake XF Series Dripline grid in place and flush until clean water flows. 5 min/10'
 Use the Xeriman Tool to install the emitters into XF Series Dripline.
44 www.rainbird.com
Application Guide
ANATOMY
PRODUCTS
NARROW BEDS
PARKING LOT
TIE DOWN STAKES
TUBING STAKE
PARKWAYS/
WALKWAYS
W/CAP
MDCF FITTINGS
POTS/BASKETS
or XFD FITTINGS
TUBING STAKE
W/CAP XF SERIES DRIPLINE
SLOPES
STREET MEDIANS
XF SERIES DRIPLINE
WALLS
XB EMITTER
GOLF COURSES
MDCF FITTINGS AIR RELIEF VALVE

or XFF FITTINGS
TREES
www.rainbird.com 45
Application Guide
Slopes
Solution
XFCV Dripline Grid with Xeri-Bug Emitters
Advantages
• XF Dripline is easy to install, resulting in labor savings
Installation
XFCV-06-12 XF Series Dripline .6 gph
@ 12” Spacing
OR
XFCV

 Connect Easy Fit adapter to Easy Fit Tee for connection to Control Zone Kit. 5 min/XCZ
 Cut lengths of XF Series Dripline to assemble grid in planting area. 10 min/50’
 Use MDCF Fittings (or XFF Dripline fittings) to create grid and stake in place. Insert Xeri-Bug 1 hr 30 min
Emitters into XF Series Dripline for supplemental watering.
 Connect 1/4” tubing to Xeri-Bug Emitters, run lines and stake next to larger plants. 8 min/Stake
 Flush zones until clean water flows. 2 min

 Supplemental Xeri-Bug Emitters or Pressure Compensating Modules can be placed next to larger plants with higher water requirements.
46 www.rainbird.com
Application Guide
www.rainbird.com
XFCV DRIPLINE
MDCF FITTINGS
or XFF FITTINGS
TIE DOWN STAKES
47
PARKWAYS/
WALKWAYS
Application Guide
Street Medians
Sparse Applications
Solution
PolyFlex Riser/Adapter & Xeri-Bug Emitters on
PVC Lateral
Advantages
• Targeted watering at plants reduces weed growth
• Pressure Compensating Emitters available from
0.5 to 24 gph for a variety of plant watering needs
Installation
PFR/FRA PolyFlex Riser/Adapter

XB XX* 10-32 Xeri-Bug Pressure Compensating Drip
Emitters (0.5 to 2.0 gph) w 10-32 Thread
PRF/FRA XB XX 10-32

 Trench, cut and glue PVC laterals. 1 hr
 Assemble Control Zone Kit and connect to water source and laterals. 1 hr
 Thread PFR/FRA into PVC Tee fitting. 3 min/Tee
 Thread Xeri-Bug Emitter into PolyFlex Riser. 2 min/PFR

 For larger trees use higher flow Pressure Compensating Modules and Diffuser Caps to avoid wash out.
 Cut PolyFlex Risers slightly above grade (before installing the Xeri-Bug Emitters) for an "invisible"
installation.
 PolyFlex Adapter (FRA) is made of Marlex® so no Teflon® tape is needed.
48 www.rainbird.com
Application Guide
www.rainbird.com
PVC TEE FITTING
PVC ELBOW
XERI-BUG EMITTER
W/ RISER/ADAPTER &
PVC LATERAL
49
PARKWAYS/
WALKWAYS
Application Guide
Street Medians
Dense Applications
Solution
XF Series Dripline Grid
Advantages
• No overspray damage to roadways and vehicles
Installation

ARV050 1/2" Air Relief Valve Kit
OR
PVC Misc. PVC Laterals and Fittings XFD XFF FITTINGS
XP600X Xeri-Pop (optional)
SQ QTR SQ Series Nozzle (optional)

 Cut lengths of XF Series Dripline to build grid in planting area. 10 min/50’
 Connect lengths of XF Series Dripline to Easy Fit Fittings (or XF Dripline 17mm fittings) 25 min/50’
to create grid (add Air Relief Valve Kit to the zone and connect to Control Zone Kit).
 Stake XF Series Dripline grid in place and flush until clean water flows. 5 min/10’

 Flush the zone upon installation and 2-4 times per year. Drip Tip
 Install 1/2" Air Relief Valve Kit at high point in the system. Add a Xeri-Bubbler Xeri-Pop with an XPCN Series
Nozzle to the line nearest Control Zone/Valve box
 Leave XF Series Dripline coil in the sun while preparing for installation. as an indicator for maintenance crews.
 Use XFS Series Dripline to protect against root intrusion
50 www.rainbird.com
Application Guide
www.rainbird.com
XF SERIES DRIPLINE
MDCF FITTINGS
or XFF FITTINGS
TIE DOWN STAKES
51
PARKWAYS/
WALKWAYS
Application Guide
Street Medians
Dense Applications
Solution
SQ Series Nozzle on 1800 Spray Heads with Swing
Assembly on PVC Lateral
Advantages
• Precise square wetting pattern reduces overspray,
• Adjustable radius in one unit makes design and
installation simple
Installation
SQ–XXX* SQ Series Nozzles

18XX 1800 Series Spray Head with
Desired Pop-up Height
SA-XXX SA Series Swing Assembly
* Half, full, or quarter nozzles as needed for planting bed
1806 SQ NOZZLES

 Trench, cut, and glue PVC laterals. 1 hr/20’
 Thread 1800 Series Spray Head onto swing assembly then thread the swing assembly 5 min/Assembly
into the Slip x Slip x Threaded Tee PVC fitting.
 Cut PVC laterals and glue in Slip x Slip x Threaded Tee assembly. 5 min/Tee
 Flush system until water flows clear. As needed
 Install SQ Series nozzles on 1800 Spray Heads. 2 min/Nozzle

 Adjust watering time as seasons/weather changes. Drip Tip
 Ensure that all SQ Series Nozzles are adjusted to the With a simple turn of the nozzle to the next preset stop, the
SQ Series Nozzle adjusts from a 2.5' throw to a 4' throw. All
appropriate throw distance.
nozzles in the same zone must be adjusted to the same throw.
52 www.rainbird.com
Application Guide
www.rainbird.com
PVC LATERAL
SQ SERIES NOZZLE
1800 SPRAY HEAD W/
53
PARKWAYS/
WALKWAYS
Application Guide
Street Medians
Solution
Advantages
• No overspray damage to roadways and vehicles
Installation
ARV050 1/2" Air Relief Valve
XFF Series XF Dripline 17mm Insert Fittings
XFD XFF FITTINGS

 Connect Easy Fit series for connection to Control Zone Kit. 5 min
 Cut lengths of XF Series Dripline to assemble grid in planting area. 10 min/50’
Use Easy Fit Compression Fittings (or XFF Dripline fittings) to create XF Series Dripline grid. Add
 1 hr 30 min
1/2" Air Relief Valve Kit and stake grid in place. Insert Xeri-Bug Emitters into XF Series Dripline for
supplemental watering.
 Connect 1/4” tubing to Xeri-Bug Emitters, run lines and stake next to larger plants. 8 min/Stake
 Flush zones until clean water flows. 2 min

 Supplemental Xeri-Bug Emitters or Pressure Compensating Modules are placed next to larger plants with higher water requirements.
54 www.rainbird.com
Application Guide
ANATOMY
PRODUCTS
TUBING STAKE
NARROW BEDS
W/CAP
PARKING LOT
XF SERIES DRIPLINE
PARKWAYS/
WALKWAYS
TIE DOWN STAKES
POTS/BASKETS
SLOPES
XB EMITTER
STREET MEDIANS
XFF FITTINGS
WALLS
TO WATER SUPPLY
GOLF COURSES
AIR RELIEF VALVE

TREES
www.rainbird.com 55
Application Guide
Walls
Retaining Walls
Solution
XF Series Dripline
Advantages
• Targeted watering helps reduce erosion of wall
Installation

ARV 050 1/2" Air Relief Valve
OR
XFD XFF FITTINGS

 Cut lengths of XF Series Dripline to lay laterally below retaining wall. 10 min/50’
 Connect lengths of XF Series Dripline to Easy Fit Fittings, add 1/2" Air Relief Valve and add Flush 30 min/50’
Cap to end. Connect to Control Zone Kit.
 Stake XF Series Dripline in place and flush until clean water flows. 5 min/10’

 Break up watering cycles to avoid run off or pooling of water in blocks.
 Use XFS Series Dripline to protect against root intrusion
56 www.rainbird.com
Application Guide
www.rainbird.com
AIR RELIEF VALVE
TIE DOWN STAKES
XF SERIES DRIPLINE
MDCF FITTINGS
57
PARKWAYS/
WALKWAYS
Application Guide
Flower Bed
Solution
• XF Series Dripline Grid with Xeri-Bug Emitters
Advantages
• No unsightly run off in high visibility areas
• No damage to walls, entry way or cart paths
from overspray
Installation
OR
ARV050 1/2" Air Relief Valve
TDS-050-30 Tie Down Stake
Drip Emitters (0.5 to 2.0 gph) XFD XM TOOL XB XX

 Cut lengths of XF Series Dripline to build grid in planting area. 10 min/50’
 Connect lengths of XF Series Dripline to Easy Fit Fittings to create grid, add 1/2" Air Relief Valve. 20 min/50’
 Stake XF Series Dripline grid in place. 5 min/10’
 Stake tubing in place and attach Diffuser Bug Cap on the end. 3 min/Stake
 Flush system until clean water flows.
2 min

58 www.rainbird.com
Application Guide
ANATOMY
PRODUCTS
NARROW BEDS
PARKING LOT
PARKWAYS/
WALKWAYS
TUBING STAKE W/CAP
POTS/BASKETS
TIE DOWN STAKES
XFD DRIPLINE
XB EMITTER
SLOPES
STREET MEDIANS
AIR RELIEF VALVE
WALLS
MDCF FITTINGS
GOLF COURSES
XFS DRIPLINE
TREES
www.rainbird.com 59
Application Guide
Narrow Planting Bed Next to

Clubhouse or Cart Path
Sparse Application
Solution
Advantages
• Xeri-Bird 8 Manifold with PRS offers pressure regulation,
filtration and controlled watering to multiple plants
• Manifold allows for increase/decrease in future plant
water demands
Installation

XB XX* Xeri-Bug Pressure Compensating Drip
Emitters (0.5 to 2.0 gph)
DCB-025 Diffuser Bug Caps
SEB7X Emitter Box
* Select appropriate emitter flow rate and barbed or threaded connection

 Trench, cut and glue PVC laterals. 1 hr/20’
 Thread Xeri-Bird 8 Outlet Manifold onto in-stem 30 psi Pressure Regulator, 8 min/Assembly
then connect to PVC tee.
 Attach 1/4” distribution tubing to outlets on Xeri-Bird 8 Outlet Manifold. 5 min/XBD-80
 Run 1/4” lines to plants, stake in place with a Diffuser Bug Cap on the end. 8 min/Stake
 Install the desired Xeri-Bug Emitter inside Xeri-Bird 8 Outlet Manifold. 3 min/XBD-80
 Use an SEB7X Emitter Box for added protection of the Xeri-Bird 8. (optional)

 Install Xeri-Bug Emitters in Xeri-Bird 8 Outlet Manifold with self-piercing barb end up.
 Leave 6” slack in 1/4” tubing next to manifold in case of unexpected maintenance.
60 www.rainbird.com
Application Guide
www.rainbird.com
BUILDING
XBD-80
W/ CAP
TUBING STAKE
WATER SOURCE
PVC LATERAL
61
PARKWAYS/
WALKWAYS
Application Guide
Landscaped Areas on the Course

Adjacent to Tee Box, Fairways
or Greens
Solution
Pressure Compensating Multi-Outlet Xeri-Bug Device
on a PVC Lateral
Advantages
• Durable installation in high maintenance areas
• Targeted watering reduces weed growth and extends
life of mulch
• Native plant life helps reduce water usage
Installation
XBT-10-6 1.0 GPH Multi-Outlet Xeri-Bug Manifold

1/2” Riser Sch-80 Riser 1/2” MPT
XBT-10-6 TS-025

 Trench, cut and glue PVC laterals. 1 hr/20’
 Assemble Control Zone Kit and position in valve box. 20 min
 Connect Control Zone to water source and laterals. 1 hr
 Thread 1/2” riser into PVC and thread 1.0 GPH Multi-Outlet Xeri-Bug Manifold onto riser. 5 min/Assembly
 Connect 1/4” lines to manifold outlets and run to sparse plantings. 5 min/Line
 Stake in place and add Diffuser Bug Cap to end of lines. 3 min/Stake

 Do not run 1/4” lines more than 5’-8’ from water source for optimal performance.
Drip Tip
Use an SEB7X Emitter Box for added protection of the
XBT-10-6 (optional).
62 www.rainbird.com
Application Guide
www.rainbird.com
W/CAP
TUBING STAKE
PVC LATERAL
XBT-10-6
ON RISER
63
PARKWAYS/
WALKWAYS
Application Guide
Trees
Solution
Root Watering Series with XF Series Dripline
Blank Tubing
Advantages
• Helps prevent damage to hardscapes from tree roots
• Promotes health in trees and shrubs
• Vandal resistant
Installation
XCZ-100-PRF 1" Control Zone Kit
RWS or RWS-M RWS Root Watering Series
XFD-XXX XF Series Dripline Blank Tubing
SPB-025 1/4" Self Piercing Barb Connector
XQ-100 1/4" Distribution Tubing
OR Drip Emitters (0.5 to 2.0 gph)
PC-XX Pressure Compensating Module XFD RWS
(be sure to use a PC Diffuser Cap)
Add other drip products as needed (optional)

 Connect lengths of XF Blank Tubing and insert two to four 1/4” Self Piercing Barb Connectors for 10 min/50'
each tree. Attach length of 1/4" distribution tubing to each barb connector.
 Thread the 1/4" distribution tubing through the hole in the side of the RWS Root Watering Series 10 min/RWS
unit, secure the 1/4" distribution tubing in the 1/4" tubing support brackets at the top of the
RWS and install the appropriate Xeri-Bug or PC Module with Diffuser Cap emitter at the end of
the tubing.
 Install additional drip products as needed for other plant material (optional). as needed
 Flush system until water runs clear.

 Leave XF Series Dripline Blank Tubing coils in the sun while Drip Tip
preparing for installation. Use two RWS for young/newly planted trees.
 Install emitters and 1/4" Self Piercing Barbs with a Xeriman Use three to four RWS for older/more mature trees.
Tool (XM Tool) for 50% faster installation.
64 www.rainbird.com
Application Guide
ANATOMY
PRODUCTS
NARROW BEDS
1/4" SELF-PIERCING
BARB CONNECTOR
PARKING LOT
PARKWAYS/
WALKWAYS
POTS/BASKETS
SLOPES
ROOT WATERING SERIES
STREET MEDIANS
XF SERIES DRIPLINE
BLANK TUBING
WALLS
GOLF COURSES
Evenly space units around root ball

TREES
with top even with ground surface.
www.rainbird.com 65
The Intelligent Use of Water.™
LEADERSHIP • EDUCATION • PARTNERSHIPS • PRODUCTS
At Rain Bird, we believe it is our responsibility

to develop products and technologies that use
water efficiently. Our commitment also extends to
education, training and services for our industry and
our communities.
The need to conserve water has never been greater.

We want to do even more, and with your help, we can.
Visit www.rainbird.com for more information about
The Intelligent Use of Water. TM
Rain Bird Corporation

Landscape Drip Division
970 West Sierra Madre Avenue
Azusa, CA 91702
(800) 812-3400
www.rainbird.com
The Intelligrent Use of Water™ ® Registered Trademark of Rain Bird Corporation

© 2014 Rain Bird Corporation 08/14
Visit www.rainbird.com to learn about our efforts.
D39634C

Landscape Drip Application Guide

Uploaded by

Copyright:

Available Formats

Landscape Drip Application Guide

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Landscape Drip Application Guide

Uploaded by

Copyright:

Available Formats

Landscape Drip Application Guide

A Practical Guide for Designing and Installing Drip Irrigation Systems

The Intelligent Use of Water™

The Efficiency of Drip, Engineered by Rain Bird® Benefits of Xerigation®

commitment to engineering and

XF Series Dripline (XFD/XFCV/XFS)

Anatomy of Xerigation .......................................2

Emission Devices ..................................................4

Control Zone Kits ............................................... 15

Narrow Planting Beds ...................................... 16

Parking Lot ........................................................... 26

Parkways and Walkways ................................. 32

Street Medians ................................................... 48

Golf Courses ........................................................ 58

Anatomy of Xerigation®/ Landscape Drip System Overview

“PGA Valve” and “Pressure QF Dripline QF Dripline 45

Regulating Basket Filter” Header Header

Air Relief XFS Sub-Surface XFD Dripline 23 XFCV Dripline Easy

• Water conservation • Reduced liability (e.g. no overspray, no runoff)

Easy Fit Tee ¼" Barb Connector XF Series Blank Xeri-Bug

1/4” XQ ¼" 1/4”

Anatomy of a Xerigation® / Landscape Drip System

Point-source low-flow emitters for

trees, and container plants. 20

erigation® / Landscape Drip System

XB-05-6 XB-10-6 XB-20-6

ion® / Landscape Drip System of the tubing.

1/2" FPT inlet x Barb Outlet

Six outlet emitter with built-in 9

dscape Drip System the needed product to a multi-outlet

Xeri-Bird™ 8 Multi-Outlet Emission Device

½” FPT Inlet x Barb Outlet 9

Xeri-Bug emitters or PC Modules for

The Xeri-Bird 8 provides a centralized

allow for precise water placement.

Anatomy of a Xerigation® / Landscape Drip System PC-12 PC-18 PC-24

ation / Landscape Drip System

Module directly into drip tubing

8 77 For7 precise water placement, a barbed

connector can be punched into drip 77 location7 for up to eight

tubing. The PC Module with a PC

Diffuser3 Cap is then placed

should the emitter become dislodged,

materials. Tentacles of ¼" distribution

35. ⁄4” Barb

8 allow for precise water placement.

Xeri-Black Stripe Tubing 11. Easy Fit Elbow 323518 17. 32

35. Multi-Outlet Xeri-Bug

* 18. XPCN Series Nozzle

PC28Emitter Diffuser Cap 28

30. asy Fit ries N

32. urple Flush C

⁄4” Distribution Tubing 14. PC Module-1032 25. Xeri-Bird 8

20. Xeri-Bubbler SPYK 32. Xeri-Bug Emitter - 1032

Xeri-Bug Emitter - 1⁄2” The

8 7 8 27. 6 Outlet Manifold

33. XT-700 Distribution Tubing

Tie-Down Stake 16.

24. F Drip mitter

17. 1⁄4” Self-Piercing Barb 22. SEB-7X Emitter ValvetoBox