OSHA Confined Space - CFR 1910

Confined Spaces
The OSHA confined-space standard, 29 CFR 1910.146, is written for

general industry and states that it is not applicable to construction.
General Requirements for a confined space:

OSHA requires roofing contractors to evaluate their workplaces to
determine if any spaces are to be classified as permit-required confined
spaces. If permit-required confined spaces are present, contractors must
mark each entry point with a sign reading “DANGER—PERMIT-
REQUIRED CONFINED SPACE. DO NOT ENTER.”
To understand the requirements of a permit-required confined space,
the definition of a confined space must be understood. OSHA defines a
confined space as any space that:
 Is large enough and so configured that an employee can bodily enter
and perform assigned work
 Has limited or restricted means for entry or exit (e.g., tanks, tankers,
silos, storage bins, vaults and pits)
 Is not designed for continuous employee occupancy
Permit Requirement for Confined Spaces:

When a roofing contractor determines that confined spaces exist, the
next step is to determine whether the confined space is a permit-
required confined space. OSHA defines a permit-required confined
space as a confined space that meets one or more of the following
characteristics:
 Contains or has the potential to contain a hazardous atmosphere
 Contains a material that has the potential for engulfing an entrant
 Has an internal configuration such that an entrant could be trapped
or asphyxiated by inwardly converging walls or a floor that slopes
downward and tapers to a smaller cross-section
 Contains any other recognized serious safety or health hazard
Atmospheric Monitoring:
In order to enter any confined space without the use of special types of
PPE, such as a self-contained breathing apparatus (SCBA),
atmospheric conditions must have these characteristics:
 Oxygen: 19.5 percent to 23.5 percent
 Flammability: below 10 percent of the lower flammable limit (LFL)
for gases, vapors, mists or combustible dust.
 Toxic gases: below the permissible exposure limit (PEL)/threshold
limit value (TLV) or time-weighted average (TWA) of a substance
Alternative Entry Procedures:

A contractor may allow entry into a permit-required space using
alternative entry procedures. Using these procedures, the contractor
does not need to have a written program, written permit, attendant or
rescue team, etc., providing that:
 The only hazards in the permit space are atmospheric
 Hazards can be controlled by the use of continuous forced-air
ventilation
 Atmosphere is tested periodically during entry
If a hazardous atmosphere is detected at any time during the entry, the

following are required:
 Each employee must leave the space immediately.
 The space must be evaluated to determine how the hazardous
atmosphere developed.
 Steps must be taken to protect the employees from the hazardous
atmosphere before a subsequent entry takes place.
Non-permit required Confined Spaces:

Permit-required confined spaces may be reclassified as nonpermit-
required confined spaces if certain criteria are met. If these criteria are
met, rescue teams, special PPE, etc., are not required. The criteria
include the following:
 The space poses no actual or potential hazardous atmospheres.
 All hazards within the space can be eliminated without entry into the
space, such as locking and tagging equipment so it cannot be operated
while employees are working inside.
 Forced-air ventilation to control atmospheric hazards does not
constitute elimination of hazards.
Training:
OSHA requires contractors to provide training for those who may be
involved in the permit-required confined-space process.
Training Requirements and Responsibilities of Entry Supervisors:
 Know, understand and ensure the completion of the training
requirements of the authorized entrants and attendants as outlined in
their requirements and responsibilities.
 Ensure the entry permit is completely and properly filled out and verify
that the air monitoring has been done correctly.
 Terminate the permit when conditions change either inside or outside
the space or when the permit expires.
 Verify that either external or internal rescue services are available.
 Determine when responsibility for a permit space is transferred, and
ensure operations remain consistent with the terms on the entry permit.
 Require all unauthorized entrants to leave the permit area.
 Know the signs and symptoms of exposure for the hazardous
atmospheres encountered in each confined space.
Training Requirements and Responsibilities of Authorized

Entrants:
 Be properly trained on all anticipated hazards of permit-required
confined spaces.
 Know how to use all equipment properly.
 Know the signs and symptoms of exposure to hazardous
atmospheres and how to perform self-rescue.
 Know the evacuation signal, and understand that the attendant
can initiate immediate evacuations requiring all entrants to exit.
 Remain in constant communication with the attendant.
Alert the attendant when:

 The entrant recognizes any warning signs or symptoms of
exposure to a dangerous situation.
 The entrant detects a condition that is not allowed on the permit.
 Training Requirements and Responsibilities of Attendants:
 Know the hazards that may be encountered during entry, including
signs and symptoms of exposures and exposure consequences.
 Remain outside the space at all times and be in constant
communication with the entrants. Under no circumstances is an
attendant allowed to leave the entrance area of the confined space
or perform duties that will interfere with the primary responsibility
of communicating with those inside the confined space.
 Continuously maintain a proper count and be able to identify all the
entrants.
 Monitor activities inside and outside the confined space to ensure
the safety of the entrants.
 Summon rescue or other emergency personnel when needed.
 Perform nonentry rescues when possible.
 Warn all unauthorized entrants of emergencies.
Authorized Entrants:
Authorized entrants are employees who have been trained and
approved to enter a confined space. These employees must have had
training regarding the potential hazards of the confined space, as well as
the signs and symptoms of overexposure to any of the hazards.
Authorized Attendants:
Authorized attendants must be able to monitor situations inside and
outside confined spaces so they can order entrants to evacuate a space
if a dangerous situation arises in either place. If an emergency situation
arises in the confined space, the attendant is the person responsible for
summoning emergency services and performing whatever rescue
operation he or she has been trained and equipped to perform.
Entry Supervisors:
Entry supervisors must know the hazards of confined spaces and the
signs and symptoms of overexposure to those hazards. They must verify
that permits are filled in, the appropriate testing and procedures have
been completed, and all equipment is in place. Finally, they are
responsible for making sure rescue services are available and the
means for calling them are operable.
Rescue and Emergency Services:

Contractors who decide to have their employees enter a permit space
must provide rescue and emergency services. There are three different
types of emergency rescue that a contractor can rely on:
1. In-house rescue services
2. Outside rescue services, such as local fire departments
3. Nonentry rescues
Once every 12 months, rescuers must simulate an actual rescue using
real people or mannequins. At least one member of the in-house rescue
team must be trained in first aid/CPR.
Material safety data sheets (MSDSs) for chemicals to which an entrant

was exposed in a confined space are required to be made available to
the medical facility that provides aid.
Personal Protective Equipment:

If the confined space has a height of more than 5 feet with an entry point
overhead, each entrant will be required to wear a body harness attached
to a mechanical retrieval system, such as a tripod.
If the confined space is less than 5 feet in height but has a potentially
hazardous atmosphere, each entrant will wear a body harness attached
to a lifeline that will be monitored by the attendant. This system will allow
the attendant to perform a non-entry rescue, if necessary, by pulling the
entrant out by the lifeline.
General Safety Issues:

Under no circumstances will compressed gas cylinders such as those
containing oxygen or acetylene be allowed inside the confined space.
When natural lighting is not sufficient, additional lighting will be provided.
It must not exceed 12V in damp conditions and will be equipped with a
ground fault circuit interrupter. (In our SOP we follow 24V)

OSHA Confined Space - CFR 1910

Uploaded by

Copyright:

Available Formats

OSHA Confined Space - CFR 1910

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

OSHA Confined Space - CFR 1910

Uploaded by

Copyright:

Available Formats

Confined Spaces

The OSHA confined-space standard, 29 CFR 1910.146, is written for

General Requirements for a confined space:

Permit Requirement for Confined Spaces:

Alternative Entry Procedures:

If a hazardous atmosphere is detected at any time during the entry, the

Non-permit required Confined Spaces:

Training Requirements and Responsibilities of Authorized

Alert the attendant when:

Rescue and Emergency Services:

Material safety data sheets (MSDSs) for chemicals to which an entrant

Personal Protective Equipment:

General Safety Issues:

You might also like