UENR6748-01

May 2023

UENR6748-01 VOL 1 of 2
Component Locations - Volume 1
Schematic Machine
Description

(Dimensions: 56 inches x 35 inches)

Location Location
Compressor Gp F-7, J-16 1
Cylinder Gp - Air Hyd F-5, F-12 2
Cylinder Gp - Air Over Hyd F-2, G-11 3
Dryer As F-7, J-14 4
Governor As F-8, I-16 5
Reservoir A-6, H-10 6
Reservoir - Air E-3, J-12 7
Sensor Gp - Pressure (Air) C-6, J-11 8
Switch As - Pressure C-6, F-12 9
Switch As - Pressure C-6, E-13 10
Switch As - Pressure
Switch As - Pressure
A-9, B-11, F-15
E-6, G-5
11
12
773 and 773E Off-Highway Truck
Valve
Valve - Check
D-8, F-15
B-6, H-9
13
14
Air System
Valve - Check D-4, I-14 34 PRB1-UP
Valve - Drain (Air Tank) C-3, G-11, J-12 15 DJS1-UP
FKT1-UP
Valve - Press Protection F-2 16
Valve - Protect D-4, H-11 17
Valve - Ratio (Front Brake) E-7, H-15 18
Valve - Relay E-3, G-13 19
Valve - Relay E-3, H-12 20
Valve - Safety E-2, I-13 21

42 Page,
Valve As B-8 22
Valve As E-2, G-9 23
Valve As - RETR B-9, E-16 24
Valve Gp A-7, G-8 25
Valve Gp - Air G-6, B-8 26
Valve Gp - Air D-9, H-15 27
Valve Gp - Air (Service Foot) A-8, I-7 28
Valve Gp - BRK C-3, H-7 29
Valve Gp - Check F-4, G-13 30
Valve Gp - Check A-9, B-6, C-10, G-16 31
Valve Gp - Relay (ARC) A-10 32
Valve Gp - Shuttle DBL F-2 33

Volume 1 of 2: Standard Truck

PUBLICATIONS.CAT.COM

FLUID POWER SYMBOLS

BASIC COMPONENT SYMBOLS

MAIN AUX

PUMP OR MOTOR FLUID CONDITIONER SPRING CONTROL VALVES RESTRICTION LINE RESTRICTION PUMP PUMP
(FIXED) (2 - SECTION) (VARIABLE & PRESSURE
COMPENSATED)

VARIABILITY SPRING LINE RESTRICTION PRESSURE HYDRAULIC PNEUMATIC LINE RESTRICTION ATTACHMENT
(ADJUSTABLE) (VARIABLE) COMPENSATION ENERGY TRIANGLES (VARIABLE & PRESSURE
COMPENSATED)

VALVE ENVELOPES VALVES VALVE PORTS

ONE POSITION TWO POSITION THREE POSITION TWO - WAY THREE - WAY FOUR - WAY

CONTROL VALVES CHECK VALVES

AB A B

P T P T
BASIC SPRING SHUTTLE PILOT
NORMAL POSITION SHIFTED POSITION INFINITE POSITION
SYMBOL LOADED CONTROLLED

FLUID STORAGE RESERVOIRS

VENTED PRESSURIZED RETURN ABOVE FLUID LEVEL RETURN BELOW FLUID LEVEL

MEASUREMENT ROTATING SHAFTS

PRESSURE TEMPERATURE FLOW UNIDIRECTIONAL BIDIRECTIONAL

COMBINATION CONTROLS

SOLENOID SOLENOID SOLENOID SOLENOID & SERVO THERMAL DETENT

OR MANUAL & PILOT PILOT OR MANUAL

MANUAL CONTROL SYMBOLS

PUSH - PULL LEVER MANUAL SHUTOFF GENERAL MANUAL PUSH BUTTON PEDAL SPRING

RELEASED PRESSURE PILOT CONTROL SYMBOLS REMOTE SUPPLY PRESSURE

EXTERNAL RETURN INTERNAL RETURN SIMPLIFIED COMPLETE INTERNAL

SUPPLY PRESSURE

ACCUMULATORS CROSSING & JOINING LINES HYDRAULIC & PNEUMATIC CYLINDERS

SPRING LOADED GAS CHARGED LINES CROSSING LINES JOINING SINGLE ACTING DOUBLE ACTING

HYDRAULIC PUMPS HYDRAULIC MOTORS INTERNAL PASSAGEWAYS

FIXED VARIABLE DISPLACEMENT FIXED VARIABLE DISPLACEMENT INFINITE

DISPLACEMENT NON-COMPENSATED DISPLACEMENT NON-COMPENSATED POSITIONING 3 POSITION 2 POSITION

UNIDIRECTIONAL UNIDIRECTIONAL

FLOW IN ONE PARALLEL CROSS FLOW IN

BIDIRECTIONAL BIDIRECTIONAL DIRECTION FLOW FLOW EITHER
DIRECTION

© 2023 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow”,
the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and
may not be used without permission.
Caterpillar: Non-Confidential.

ELECTRICAL SYMBOLS TABLE

HYDRAULIC SYMBOLS (ELECTRICAL)

G
M
TRANSDUCER TRANSDUCER GENERATOR ELECTRIC MOTOR
(FLUID) (GAS / AIR)

PRESSURE SWITCH PRESSURE SWITCH TEMPERATURE ELECTRICAL WIRE

(ADJUSTABLE) SWITCH

WIRE NUMBER IDENTIFICATION CODES

ELECTRICAL SCHEMATIC EXAMPLE HYDRAULIC SCHEMATIC EXAMPLE

CURRENT STANDARD CURRENT STANDARD

HARNESS IDENTIFICATION CODE THIS EXAMPLE

INDICATES WIRE 135 IN HARNESS “AG”
WIRE WIRE
COLOR
CIRCUIT NUMBER
325-AG135 PK-14 IDENTIFICATION WIRE COLOR

CIRCUIT NUMBER WIRE GAUGE*

*Wire gauge is shown in AWG (American Wire Gauge)
IDENTIFICATION but could also be shown in metric denoted with mm 325-PK

PREVIOUS STANDARD

WIRE WIRE COLOR

325-PK-14 B A

CIRCUIT NUMBER WIRE GAUGE* (EXAMPLE VALVE)

IDENTIFICATION *Wire gauge is shown in AWG (American Wire Gauge)
but could also be shown in metric denoted with mm
 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

(4) DRYER AS
3E-3535
(15) VALVE - DRAIN (AIR TANK)
141-2607
UENR6748-01 VOL 1 of 2

J 2
J
(1) COMPRESSOR GP
4N-6842
(Dimensions: 56 inches x 35 inches)

(7) RESERVOIR - AIR

360-6826

MAIN
(8) SENSOR GP - PRESSURE (AIR)
1
RESERVOIR 344-7389

(34) VALVE-CHECK
7D-6936 AIR
SEAT
I I
(5) GOVERNOR AS
4N-9680 (21) VALVE-SAFETY
6B-9664

(28) VALVE GP - AIR (SERVICE FOOT)

247-1293
(29) VALVE GP - BRK
42 Page,

113-1543
(27) VALVE GP - AIR (17) VALVE - PROTECT
128-4972 2G-8815
12

(14) VALVE-CHECK
H (6) RESERVOIR H
6D-1432 1 2
X
162-7880
3 Y
(20) VALVE - RELAY 10
(18) VALVE RATIO (FRONT BRAKE)
159-5149 SEE HYDRAULIC SCHEMATIC
8W-6908 3
2

1 (25) VALVE GP
SECONDARY
3
RESERVOIR
172-6232
2 3 1

12

(12) SWITCH AS - PRESSURE

G 1 (19) VALVE - RELAY (15) VALVE - DRAIN (AIR TANK) 2
1 2 160-2445 G
2
2 1
159-5149 141-2607
3
(23) VAVLE AS
10
213-1081
(30) VALVE GP - CHECK X X
(3) CYLINDER GP - AIR OVER HYD
(31) VALVE GP-CHK 4K-9714 8W-3405
(26) VALVE GP - AIR
6D-3781 464-6945
MASTER CYL (REAR)
Y Y
(13) VALVE (2) CYLINDER GP - AIR HYD MASTER CYL (FRONT) (3) CYLINDER GP - AIR OVER HYD
247-1292 SEE HYDRAULIC SCHEMATIC 8X-6987 8W-3405

(2) CYLINDER GP - AIR HYD (5) GOVERNOR AS (1) COMPRESSOR GP

F 8X-6987 4N-9680 4N-6842 F
(11) SWITCH AS - PRESSURE (30) VALVE GP - CHECK (33) VALVE GP - SHUTTLE DBL
Y
103-4977
GOV
AIR DRYER 4K-9714 147-6277
M N
J DBL CK VALVE
G
RELAY VALVE
(9) SWITCH AS - PRESSURE (4) DRYER AS DBL CK (REAR)
S
(16) VALVE - PRESS PROTECTION
VALVE
3E-2034 3E-3535 153-9540
H
PRESS PROTECT
U VALVE

RELAY VALVE
(FRONT)
(23) VAVLE AS
D
(24) VALVE GP - RETR AIR COMPRESSOR 213-1081
RELAY VALVE
165-2136 (12) SWITCH AS (ARC)
E
PRESSURE (19) VALVE - RELAY (20) VALVE - RELAY
E (10) SWITCH AS - PRESSURE E
K 160-2445 159-5149 159-5149
166-7781 R

(7) RESERVOIR - AIR

H O
360-6826
C
(18) VALVE RATIO (FRONT BRAKE) ONE-WAY
8W-6908
B
CK VALVE
(21) VALVE-SAFETY
6B-9664
F
AIR RESERVOIR
(SERVICE)
JCT PLATE

CAB ENCLOSURE
8 7 6 5 4 3 2 1 PRESS PROT
VALVE
E SAFETY VALVE
BK AIR
D SECONDARY PRESS (34) VALVE-CHECK D
SENSOR
FRT BRAKE
BRAKE "ON"
7D-6936 T
FRONT BK
VALVE
(27) VALVE GP - AIR RATIO VALVE
128-4972 F N DRAIN
(17) VALVE - PROTECT X
VALVE
C 2G-8815
O
SERV BRAKE (13) VALVE
CONT VALVE
247-1292 (8) SENSOR GP (15) VALVE - DRAIN (AIR TANK)
PRESSURE (AIR) 141-2607
344-7389
J
AIR
Z
SEAT

ELIM
C B AA C
WITH REAR CAB WALL
ARC
K
BB
(29) VALVE GP - BRK
DBL CK
(9) SWITCH AS 113-1543
(31) VALVE GP-CHK VALVE

6D-3781
Y
PRESSURE (10) SWITCH AS SECONDARY & PARK
BRAKE SW 3E-2034 PRESSURE CONT VALVE
ELIMINATE WITH ARC 166-7781
RETR SW
D
Q (15) VALVE - DRAIN (AIR TANK)
ELIM
WITH
ELIM WITH ARC BK CONT VALVE DBL CK
W 141-2607
(RETR) VALVE
ARC W
STOPLAMP DRAIN
SW VALVE
PARK BRAKE
CONT VALVE (31) VALVE GP-CHK
6D-3781
ELIM (26) VALVE GP-AIR
T DD
B WITH D S 464-6945
A CAB ENCLOSURE B
ARC PARK BRAKE
(14) VALVE-CHECK
R RESET VALVE FF
(22) VALVE AS 6D-1432
(24) VALVE LINE PATTERNS
SEC BRAKE
(11) SWITCH AS - PRESSURE ARC
AS - RETR CONT VALVE 213-1081 INV KK
Pressure Line
PRESS VALVE ONE-WAY
103-4977 SW S U 165-2136 EE DEL CHECK
Pilot / Load Sensing Pressure

VALVE Drain / Return Lines

CC
G
(31) VALVE INV VALVE CTRL
AIR
Air Line

ARC GP - CHECK INVERSION

RESERVOIR Component Group
VALVE GP - RELAY (ARC) S D 6D-3781 VALVE
(SEC)
CALLOUTS
127-4661 YY Taps (Pressure, Sampling, Sensor - by letter)
Do not operate or work on this product unless you have
INV VALVE read and understood the instruction and warnings in the DL DL D Connectors (By letter)
RETR SW (25) VALVE GP JJ
SUPPLY relevant Operation and Maintenance Manuals and
relevant service literature. Failure to follow the instruc- Callout Number Component

172-6232 tions or heed the warnings could result in injury or

death. Proper care is your responsibility.
(Machine Location from
Component LocationsTable)
(52) VALVE GP - CONTROL
138-1234 Part Number
Name

A (11) SWITCH AS - PRESSURE H A

103-4977 THIS SCHEMATIC IS FOR THE 773 AND 773E OFF-HIGHWAY TRUCK AIR SYSTEM
X (6) RESERVOIR
VOLUME 1 of 2: STANDARD TRUCK
162-7880 AIR SYSTEM COLOR DESCRIPTIONS MEDIA NUMBER: UENR6748-01
M AIR COMPRESSOR OUTPUT AND CIRCUITS SCHEMATIC PART NUMBER: 460-6701, CHANGE: 00, VERSION: -
AIR EXHAUST/DRAIN Components are shown installed on a fully operable machine with the key and engine on, transmission shifter
(28) VALVE GP - AIR (SERVICE FOOT) ATTACHMENT CIRCUIT in neutral, front brakes switched off and with parking brake set.
Refer to the appropriate Service Manual for Troubleshooting, Specifications and Systems Operations.
247-1293 Refer to the Parts Manual using a specific serial number prefix in SIS before ordering parts from this schematic.

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
 UENR6748-01
May 2023

UENR6748-01 VOL 2 of 2
Component Locations - Volume 2
Schematic Machine
Description
Location Location

(Dimensions: 56 inches x 35 inches)

Compressor Gp F-7, J-15 1
Cylinder Gp - Air Hyd F-5, F-13 2
Cylinder Gp - Air Over Hyd F-2, F-10 3
Dryer As F-7, J-14 4
Governor As F-8, I-15 5
Reservoir A-6, H-10 6
Reservoir - Air E-3, J-12 7
Sensor Gp - Pressure (Air) C-6, J-11 8
Switch As - Pressure C-6, F-11 9
Switch As - Pressure C-6, E-11 10
Switch As - Pressure
Switch As - Pressure
A-9, B-11, E-11
E-6, G-5
11
12
773 and 773E Off-Highway Truck
Valve
Valve - Check
C-8, F-15
D-4, I-14
13
34
Air System
Valve - Check B-4, H-9 14 PRB1-UP
Valve - Drain (Air Tank) C-3, G-11, J-12 15 DJS1-UP
Valve - Press Protection H-13, F-2 16 FKT1-UP

Valve - Protect D-4, H-11 17

Valve - Ratio (Front Brake) E-7, H-15 18
Valve - Relay E-3, G-13 19
Valve - Relay E-3, G-13 20
Valve - Safety D-2, I-12 21

42 Page,
Valve As B-8 22
Valve As H-12, E-2, G-9 23
Valve As - RETR B-9, E-16 24
Valve Gp A-7, G-8 25
Valve Gp - Air D-9, H-15 27
Valve Gp - Air B-8, G-7 26
Valve Gp - Air (Service Foot) A-8, I-7 28
Valve Gp - BRK C-3, H-7 29
Valve Gp - Check F-4, F-13 30
Valve Gp - Check B-6, C-10, A-9, F-15, E-13 31
Valve Gp - Relay (ARC) A-11, E-14 32
Valve Gp - Shuttle DBL G-11, F-2 33

Volume 2 of 2: ARC Equipped Truck

PUBLICATIONS.CAT.COM

FLUID POWER SYMBOLS

BASIC COMPONENT SYMBOLS

MAIN AUX

PUMP OR MOTOR FLUID CONDITIONER SPRING CONTROL VALVES RESTRICTION LINE RESTRICTION PUMP PUMP
(FIXED) (2 - SECTION) (VARIABLE & PRESSURE
COMPENSATED)

VARIABILITY SPRING LINE RESTRICTION PRESSURE HYDRAULIC PNEUMATIC LINE RESTRICTION ATTACHMENT
(ADJUSTABLE) (VARIABLE) COMPENSATION ENERGY TRIANGLES (VARIABLE & PRESSURE
COMPENSATED)

VALVE ENVELOPES VALVES VALVE PORTS

ONE POSITION TWO POSITION THREE POSITION TWO - WAY THREE - WAY FOUR - WAY

CONTROL VALVES CHECK VALVES

AB A B

P T P T
BASIC SPRING SHUTTLE PILOT
NORMAL POSITION SHIFTED POSITION INFINITE POSITION
SYMBOL LOADED CONTROLLED

FLUID STORAGE RESERVOIRS

VENTED PRESSURIZED RETURN ABOVE FLUID LEVEL RETURN BELOW FLUID LEVEL

MEASUREMENT ROTATING SHAFTS

PRESSURE TEMPERATURE FLOW UNIDIRECTIONAL BIDIRECTIONAL

COMBINATION CONTROLS

SOLENOID SOLENOID SOLENOID SOLENOID & SERVO THERMAL DETENT

OR MANUAL & PILOT PILOT OR MANUAL

MANUAL CONTROL SYMBOLS

PUSH - PULL LEVER MANUAL SHUTOFF GENERAL MANUAL PUSH BUTTON PEDAL SPRING

RELEASED PRESSURE PILOT CONTROL SYMBOLS REMOTE SUPPLY PRESSURE

EXTERNAL RETURN INTERNAL RETURN SIMPLIFIED COMPLETE INTERNAL

SUPPLY PRESSURE

ACCUMULATORS CROSSING & JOINING LINES HYDRAULIC & PNEUMATIC CYLINDERS

SPRING LOADED GAS CHARGED LINES CROSSING LINES JOINING SINGLE ACTING DOUBLE ACTING

HYDRAULIC PUMPS HYDRAULIC MOTORS INTERNAL PASSAGEWAYS

FIXED VARIABLE DISPLACEMENT FIXED VARIABLE DISPLACEMENT INFINITE

DISPLACEMENT NON-COMPENSATED DISPLACEMENT NON-COMPENSATED POSITIONING 3 POSITION 2 POSITION

UNIDIRECTIONAL UNIDIRECTIONAL

FLOW IN ONE PARALLEL CROSS FLOW IN

BIDIRECTIONAL BIDIRECTIONAL DIRECTION FLOW FLOW EITHER
DIRECTION

© 2023 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow”,
the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and
may not be used without permission.
Caterpillar: Non-Confidential.

ELECTRICAL SYMBOLS TABLE

HYDRAULIC SYMBOLS (ELECTRICAL)

G
M
TRANSDUCER TRANSDUCER GENERATOR ELECTRIC MOTOR
(FLUID) (GAS / AIR)

PRESSURE SWITCH PRESSURE SWITCH TEMPERATURE ELECTRICAL WIRE

(ADJUSTABLE) SWITCH

WIRE NUMBER IDENTIFICATION CODES

ELECTRICAL SCHEMATIC EXAMPLE HYDRAULIC SCHEMATIC EXAMPLE

CURRENT STANDARD CURRENT STANDARD

HARNESS IDENTIFICATION CODE THIS EXAMPLE

INDICATES WIRE 135 IN HARNESS “AG”
WIRE WIRE
COLOR
CIRCUIT NUMBER
325-AG135 PK-14 IDENTIFICATION WIRE COLOR

CIRCUIT NUMBER WIRE GAUGE*

*Wire gauge is shown in AWG (American Wire Gauge)
IDENTIFICATION but could also be shown in metric denoted with mm 325-PK

PREVIOUS STANDARD

WIRE WIRE COLOR

325-PK-14 B A

CIRCUIT NUMBER WIRE GAUGE* (EXAMPLE VALVE)

IDENTIFICATION *Wire gauge is shown in AWG (American Wire Gauge)
but could also be shown in metric denoted with mm
 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

(4) DRYER AS
3E-3535
(15) VALVE - DRAIN (AIR TANK)
141-2607
UENR6748-01 VOL 2 of 2

J 2 J
(1) COMPRESSOR GP
4N-6842 (7) RESERVOIR - AIR
(Dimensions: 56 inches x 35 inches)

360-6826

MAIN (8) SENSOR GP - PRESSURE (AIR)

1
RESERVOIR 344-7389

(34) VALVE-CHECK AIR

7D-6936 SEAT
I I
(5) GOVERNOR AS
(21) VALVE-SAFETY
4N-9680
6B-9664

(28) VALVE GP - AIR (SERVICE FOOT)

247-1293
(29) VALVE GP - BRK
42 Page,

(27) VALVE GP - AIR 113-1543

128-4972 (16) VALVE - PRESS
3
PROTECTION 2 (14) VALVE-CHECK 12
153-9540 1 (17) VALVE - PROTECT 6D-1432
2G-8815
H 1 2 H
(6) RESERVOIR X
162-7880 3 Y

(23) VAVLE AS 10

SEE HYDRAULIC SCHEMATIC

159-5149
3
(18) VALVE RATIO (FRONT BRAKE) 2
8W-6908 1
SECONDARY (25) VALVE GP
3 2
RESERVOIR 172-6232
(20) VALVE - RELAY 3 1

1 159-5149
12
(12) SWITCH AS - PRESSURE
G
160-2445 G
1 (15) VALVE - DRAIN (AIR TANK) 2
1 2
2
2 1
141-2607
(19) VALVE - RELAY
3
159-5149 (23) VAVLE AS
10
159-5149
X X
(33) VALVE GP - SHUTTLE DBL
(26) VALVE GP - AIR
(31) VALVE GP-CHK (30) VALVE GP - CHECK 147-6277
128-4971
6D-3781 4K-9714 (2) CYLINDER GP - AIR HYD MASTER CYL (REAR)
(13) VALVE Y Y (3) CYLINDER GP - AIR OVER HYD 8X-6987 MASTER CYL (FRONT) (3) CYLINDER GP - AIR OVER HYD
247-1292 8W-3405 8W-3405
SEE HYDRAULIC SCHEMATIC (5) GOVERNOR AS (1) COMPRESSOR GP
4N-9680 4N-6842
F F
(2) CYLINDER GP - AIR HYD (33) VALVE GP - SHUTTLE DBL
GOV Y
8X-6987 AIR DRYER (30) VALVE GP - CHECK 147-6277
M N
12 12 (31) VALVE GP - CHECK J
G
4K-9714 DBL CK VALVE

6D-3781 RELAY VALVE (16) VALVE - PRESS PROTECTION

(9) SWITCH AS - PRESSURE (4) DRYER AS DBL CK (REAR)
S
VALVE 153-9540
3E-2034 3E-3535
3 3 PRESS PROTECT
H
1 2 VALVE
2 2 U

1 1 RELAY VALVE
10 10 (FRONT)
D
AIR COMPRESSOR (23) VAVLE AS
RELAY VALVE 159-5149
(12) SWITCH AS E (ARC)
(24) VALVE GP - RETR
E (32) VALVE GP - RELAY (ARC) (10) SWITCH AS - PRESSURE PRESSURE (19) VALVE - RELAY E
165-2136 K (20) VALVE - RELAY
127-4661 166-7781 160-2445 159-5149
R
159-5149
(7) RESERVOIR - AIR
H
(11) SWITCH AS - PRESSURE O 360-6826
(31) VALVE GP - CHECK
103-4977 C
6D-3781 (18) VALVE RATIO (FRONT BRAKE) B ONE-WAY

8W-6908 CK VALVE
(21) VALVE-SAFETY
F
AIR RESERVOIR 6B-9664
(SERVICE)
JCT PLATE

CAB ENCLOSURE
8 7 6 5 4 3 2 1 PRESS PROT
VALVE
E SAFETY VALVE
BK AIR
D SECONDARY PRESS D
BRAKE "ON" SENSOR T
FRONT BK FRT BRAKE
VALVE (27) VALVE GP - AIR RATIO VALVE
(34) VALVE-CHECK
128-4972 F N DRAIN
7D-6936 VALVE
X
C

O
SERV BRAKE (17) VALVE - PROTECT
CONT VALVE
(8) SENSOR GP 2G-8815
(13) VALVE PRESSURE (AIR)
247-1292 344-7389 (15) VALVE - DRAIN (AIR TANK)
J
AIR
Z 141-2607
SEAT

C ELIM (9) SWITCH AS C

B AA
WITH REAR CAB WALL PRESSURE
ARC
K
BB
3E-2034 (29) VALVE GP - BRK
DBL CK
VALVE
113-1543
(31) VALVE GP-CHK Y
(10) SWITCH AS SECONDARY & PARK
6D-3781 BRAKE SW PRESSURE CONT VALVE

RETR SW ELIMINATE WITH ARC

166-7781 Q (15) VALVE - DRAIN (AIR TANK)
D
ELIM
WITH
ELIM WITH ARC BK CONT VALVE DBL CK
W 141-2607
(RETR) VALVE
ARC W
STOPLAMP DRAIN
SW VALVE
PARK BRAKE
CONT VALVE (31) VALVE GP-CHK
(26) VALVE GP-AIR 6D-3781
ELIM
B T
WITH D S
128-4971 A DD CAB ENCLOSURE B
PARK BRAKE
ARC R RESET VALVE FF ONE-WAY
(22) VALVE AS CHECK LINE PATTERNS
(11) SWITCH AS - PRESSURE ARC (24) VALVE SEC BRAKE
CONT VALVE 213-1081 INV VALVE KK
Pressure Line
VALVE
103-4977
PRESS
SW
AS - RETR DEL Pilot / Load Sensing Pressure
S EE
U
165-2136 (14) VALVE-CHECK Drain / Return Lines
INV VALVE CTRL G
CC
6D-1432 Air Line
AIR
(32) VALVE GP - RELAY (ARC) ARC INVERSION
RESERVOIR Component Group
(SEC)
127-4661 S D (31) VALVE VALVE CALLOUTS

GP - CHECK Do not operate or work on this product unless you have

YY Taps (Pressure, Sampling, Sensor - by letter)
INV VALVE
6D-3781 read and understood the instruction and warnings in the DL DL D Connectors (By letter)
RETR SW (25) VALVE GP JJ
SUPPLY relevant Operation and Maintenance Manuals and
relevant service literature. Failure to follow the instruc- Callout Number Component

AIR SYSTEM COLOR DESCRIPTIONS 172-6232 tions or heed the warnings could result in injury or
death. Proper care is your responsibility.
(Machine Location from
Component LocationsTable)
(52) VALVE GP - CONTROL
138-1234 Part Number
Name

A AIR COMPRESSOR OUTPUT AND CIRCUITS

H A
AIR EXHAUST/DRAIN
ATTACHMENT CIRCUIT
(11) SWITCH AS - PRESSURE
THIS SCHEMATIC IS FOR THE 773 AND 773E OFF-HIGHWAY TRUCK AIR SYSTEM
103-4977 X
(6) RESERVOIR VOLUME 2 of 2: ARC EQUIPPED TRUCK
MEDIA NUMBER: UENR6748-01
162-7880
M SCHEMATIC PART NUMBER: 460-6701, CHANGE: 00, VERSION: -
Components are shown installed on a fully operable machine with the key and engine on, transmission shifter
(28) VALVE GP - AIR (SERVICE FOOT) in neutral, front brakes switched off and with parking brake set.
Refer to the appropriate Service Manual for Troubleshooting, Specifications and Systems Operations.
247-1293 Refer to the Parts Manual using a specific serial number prefix in SIS before ordering parts from this schematic.

16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1