A PBL Report

On
A WEB-BASED SYSTEM FOR PROJECT-BASED LEARNING
ACTIVITIES IN THE “WEB DESIGN AND PROGRAMMING”
Submitted to CMREC (UGC Autonomous)
In Partial Fulfillment of the requirements for the Award of Degree of
BACHELOR OF TECHNOLOGY
IN
COMPUTER SCIENCE AND ENGINEERING
(ARTIFICIAL INTELLIGENCE AND MACHINE LEARNING)

Submitted By
MADISHETTY VENKAT SAI 208R1A66F0
GHOGIKAR SUSHMITHA 208R1A66D5
PASHAM AKSHITH REDDY 208R1A66G0
Under the guidance of
Mr. N. Venkatesh
Assistant Professor, Department of CSE (AI & ML)

Department of Computer Science & Engineering (AI & ML)

CMR ENGINEERING COLLEGE
UGC AUTONOMOUS
(Accredited by NBA, Approved by AICTE, NEW DELHI, Affiliated to JNTU, Hyderabad)

Kandlakoya, Medchal Road, R.R. Dist. Hyderabad-501 401)

2022-2023
 CMR ENGINEERING COLLEGE
UGC AUTONOMOUS
(Accredited by NBA, Approved by AICTE NEW DELHI, Affiliated to JNTU, Hyderabad)
Kandlakoya, Medchal Road, Hyderabad-501 401

Department of Computer Science & Engineering

CERTIFICATE
This is to certify that the project entitled “A Web-based system for project-based learning
activities in “Web Design and Programming” course” is a bonafide work carried out by
MADISHETTY VENKAT SAI -208R1A66F0
GHOGIKAR SUSHMITHA -208R1A66D5
PASHAM AKSHITH REDDY -208R1A66G0
in partial fulfillment of the requirement for the award of the degree of BACHELOR OF
TECHNOLOGY in COMPUTER SCIENCE AND ENGINEERING (AI & ML) from
CMR Engineering College, under our guidance and supervision.
The results presented in this project have been verified and are found to be satisfactory. The
results embodied in this project have not been submitted to any other university for the award
of any other degree or diploma.

____________________ __________________________

Internal Guide Head of the Department

Mr. N. VENKATESH Dr. M. KUMARASWAMY
Assistant Professor Professor & HOD
Department of CSE (AI & ML) Department of CSE (AI & ML)
CMREC, Hyderabad CMREC, Hyderabad
 DECLARATION

This is to certify that the work reported in the present project entitled “A Web-based System
for Project-based Learning Activities in “Web Design and Programming” course” is a
record of bonafide work done by me in the Department of Computer Science and Engineering
(AI & ML), CMR Engineering College. The reports are based on the project work done entirely
by me and not copied from any other source. I submit my project for further development by
any interested students who share similar interests to improve the project in the future.
The results embodied in this project report have not been submitted to any other University or
Institute for the award of any degree or diploma to the best of our knowledge and belief.

MADISHETTY VENKAT SAI -208R1A66F0

GHOGIKAR SUSHMITHA -208R1A66D5

PASHAM AKSHITH REDDY -208R1A66G0

Contents:
1. Introduction

2. Problem Statement

3. Modules

4. Evaluation

4.1. Survey Results

4.2. Other results

5. Conclusions and Future Work

6. References
1. INTRODUCTION:

Education is the most important factor in improving communities and ensuring better living
standards for them. With education and instruction, it is always possible to shape the
structure of any community. The foremost principle of education is to train people who can
use the gained knowledge, ability, and attitude to solve problems and adapt to new situations
in real life. So, today’s communities need to be educated with the most valid knowledge,
which enables them to adapt to the changing world.

Today, the knowledge is under change and reformation as a result of improvements in

the technology. So, the purpose of education is to teach students to reach knowledge rather
than transfer it (Sert, 2006). The education environment becomes more effective when
students use the knowledge to make sense of it. Experiences show that students can reach for
knowledge actively and learn better when they are at the center of the education process
(Saracaloglu, Akamca & Yesildere, 2006). In this way, students are enabled to use the
knowledge efficiently and reach comprehension, implementation, analysis, synthesis, and
evaluation steps.

Educational research has shown that students are not able to transfer the newly
acquired knowledge, abilities, and attitudes into real life and not able to use by making sense
of the gained knowledge via traditional education methods.

These kinds of problems have caused a search for more effective approaches and methods
that can enable students to achieve the mentioned purpose of education. Project-based
learning is one of these approaches that have been developed.

Project-based learning (PBL) is a learning approach that organizes students’ learning

activities around projects. A typical project requires some steps and some duration than a
couple of class days and up to a semester and cooperative group learning (CORD, 2004).
The project-based learning approach gives students the opportunity for detailed
investigations on worthy topics and enables them to learn from their experiences and apply
gained knowledge, skills, and attitudes to real cases in their lives. With project-based
learning activities, complex tasks based on challenging questions or problems involving the
students’ problem-solving, decision-making, and investigative skills are provided.
Furthermore, project-based learning is a useful approach to engage students’ interest and
motivate them to learn (Nastu, 2009). Students are enabled to investigate their interests and
make connections to the real world, thanks to project-based learning.

This paper describes a web-based system designed and developed to support project-
based learning activities in the “Web Design and Programming” course given at the
Information Technologies program of vocational high schools. The developed system aims
to enable students to learn website designing and programming by creating a website with
advanced tools included. In the system, student groups can communicate, track the task flow,
and perform the given tasks to create a simple website. Tools included in the system allow
students to prepare their web pages and assemble them with other students’ pages to form a
unique website project. The system provides editors, with ready templates and scripts to help
students in designing and developing the whole website project. Eventually, the system
provides an advanced web environment where students have an effective experience in
website designing and programming.

The rest of the paper is structured as follows: The next section describes the basics of
the project-based learning approach. Section 3 explains the using features of the web-based
system developed in this study. Section 4 describes the survey conducted after the course to
learn students’ ideas about the realized system and its effects on students’ academic
achievements. Finally, Section 5 is devoted to the conclusions that have been reached with
the study and some future works.

2. PROBLEM STATEMENT:

The problem statement outlined in this paper revolves around the need for effective
educational approaches that go beyond traditional methods to prepare students for the
challenges of the real world, particularly in the context of vocational high schools. The paper
introduces the concept of project-based learning (PBL) as an alternative approach that
organizes students' learning activities around projects.

The primary issue addressed is the difficulty students face in transferring newly
acquired knowledge, abilities, and attitudes into real-life situations through traditional
education methods. This challenge necessitates the exploration of more effective approaches,
and the paper argues that project-based learning is one such method.

The focus of the paper is on the development and implementation of a web-based

system designed to support project-based learning activities in the specific context of the
"Web Design and Programming" course within vocational high schools' Information
Technologies programs. The system aims to enable students to learn web design and
programming by actively engaging in the creation of a website using advanced tools.

 Key elements of the problem statement include:

1. Educational Purpose: The overarching goal is to improve education by training students

to actively use knowledge in problem-solving and adapting to real-life situations.

2. Technology and Knowledge Changes: The acknowledgment that the rapid changes in
technology necessitate an educational shift towards teaching students how to access and
apply knowledge rather than simply transferring it.
3. Ineffectiveness of Traditional Methods: Traditional education methods are criticized for
their inability to effectively engage students and enable them to apply acquired knowledge in
practical scenarios.

4. Introduction of Project-Based Learning (PBL): PBL is presented as an alternative

learning approach that involves organizing students' activities around projects, allowing for
in-depth investigations and the application of knowledge, skills, and attitudes to real-life
cases.

5. Focus on "Web Design and Programming" Course: The specific context of vocational
high schools' Information Technologies programs is emphasized, with the development of a
web-based system to support project-based learning in the "Web Design and Programming"
course.

6. System Features: The paper highlights the features of the developed web-based system,
including tools for communication, task tracking, and collaboration among student groups.

7. Benefits of Project-Based Learning: The benefits of project-based learning are

discussed, emphasizing hands-on learning, increased student engagement, skill development,
interdisciplinary connections, and the ability to cater to different learning styles.

The problem statement sets the stage for the rest of the paper, which includes a detailed
description of the project-based learning approach, the features of the web-based system, and
a survey conducted to assess the system's impact on student's academic achievements.

3. MODULES:

Project-Based Learning:

Project-based learning can be defined as an education approach built on authentic learning

activities that engage students’ interests and motivation. These activities are designed to
answer a question or solve a problem and generally reflect the types of learning and work
people do in real life (Project Based Learning - PBL Online, 2007). In the literature, there are
also some different definitions made about project-based learning. Bransford and Stein
(1993) define project-based learning as a comprehensive instructional approach that is used
to engage students in sustained, cooperative investigation. According to Harris and Katz
(2001), it is an instructional method that allows in-depth investigation of a topic instead of
using a rigid lesson plan that directs a student down a specific path of learning outcomes or
objectives. According to another definition, it is an innovative instructional strategy that
shifts learning focus from “teacher telling” to student-centered “learning by doing” (Liu &
Hsiao, 2002). Finally, Moursund (2001) defines project-based learning as an individual or
group activity that lasts for a defined period, and results in a product, a presentation or a
performance. Briefly, project-based learning is a learning approach that organizes students’
learning activities around projects.

Features of project-based learning

Features of project-based learning can be examined better by explaining the “project”

factor in this learning approach. Projects are some kinds of educational materials that
encourage students to learn in project-based learning. Generally, projects require a question
and problem that directs the activities and the activities that result in an artifact or product
(Blumenfeld, Soloway, Marx, Krajcik, Guzdial & Palinscar, 1991; Peterson & Mayer, 1995).
Projects also include the improvement of a product, presentation, or performance that can be
observed and utilized. Projects deal with real-life problems that arouse interest in students
and students interact with real-life through these projects (Curtis, 2002; Simkins, 1999).
Eventually, projects enable students to develop products or works that are indicated as the
solutions to the questions or problems given at the beginning of the learning process.

In project-based learning, projects need an extended period that changes between a

few lessons to a whole year of the education process (Moursund, Bielefeldt & Underwood,
1997). According to Gultekin (2007), a good project is not an activity of a single move and
requires a long time. Additionally, projects also require working collaboratively to achieve
the objectives in the defined period. So, students must work in teams that can be made up of
two or more members (Simkins, 1999). Projects also incorporate many disciplines. With
project-based learning, students can make interdisciplinary connections between various
ideas (Curtis, 2002). In other words, students can benefit from many science fields in their
projects (Moursund et al, 1997).

One of the most important features that differentiates project-based learning from
traditional education approaches is that it is student-oriented. In project-based learning,
students can define the problems, discuss the views or predictions, collect information,
evaluate the collected information, make conclusions, combine views, and create a product
(Blumenfeld et al, 1991). These tasks involve the students’ problem-solving, decision-
making, and investigative skills. Eventually, each completed task enables students to build
the knowledge that must be acquired. Throughout the tasks, students are encouraged to take
charge of their learning and become autonomous in their decisions (Liu & Hsiao, 2002).

Benefits of project-based learning

Project-based learning offers a wide range of benefits to teachers and students. Some
of these benefits can be listed below:

 By using project-based learning, students are enabled to learn by doing.

 Project-based learning engages students’ interest and motivates them to learn.
  Project-based learning supports students in learning and practicing skills in problem-
solving, communication, and self-management (Buck Institute for Education, 2007).
 By using project-based learning, better communication and more effective
collaborations can be ensured among students.
 Project-based learning provides the implementation of interdisciplinary study.
 Project-based learning can be applied to students with different learning styles and
levels.
 Project-based learning allows teachers to understand each student’s ability to work as
a team under pressure (Wong, 2006).
 By using project-based learning, teachers can observe students, both collectively and
individually, as they exchange and clarify knowledge among themselves (Wong,
2006).

Web-Based System for Project-Based Learning:

An advanced web-based system has been developed to provide an effective education

environment where project-based learning activities for the “web designing and
programming” course can be performed easily. In the designing and developing process,
many different technologies were used to form the whole system. Generally, ASP.Net
technology was used for designing and programming the web application interface.
Additionally, the interface of the system, visual elements, graphics, and other interactive
tools that can be used on the system were designed with Adobe Fireworks and Adobe Flash.
On the other hand, database connections and functions used in the system were designed and
defined with Microsoft SQL Server 2008.

The developed system provides two different activity modes to be used by teachers
and students. Activity modes employ some system tools that can be used by teachers and
students to perform web-based project-based learning activities. Interfaces of the modes were
designed similarly to ensure easy experiences for everyone. Both teachers and students must
use the system login page to enter activity modes and start their activities on the system.

Teacher activities on the system

In the system, teachers can perform many different activities by using the provided tools.
After the login process, a new web page, which is also known as the “entrance screen” of the
teacher activity mode, is shown. This page consists of three system panels. These panels are
named “User Info Panel”, “Tool Panel” and “Activity Panel” respectively. The User Info
Panel is located on the left top of the page and it shows the teacher’s photo, name, and
department information. The Tool Panel is located on the right top of the page and it includes
some system tools that can be used by teachers. Finally, the Activity Panel is located in the
middle of the page and this panel is used to view and perform system activities.
Teacher activities are mostly based on the management of project groups and project works.
Additionally, the teacher can also perform some personal activities on the system. So, it is
better to explain teacher activities under two titles: “Management Activities” and “System
Activities”.

Management activities

In the system, the teacher can control project groups and their project works by using the
“Management” button located on the Tool Panel. After clicking on this button, a new panel,
which is also titled “Group Management”, is viewed on the Activity Panel. On this panel, a
list of active project groups is shown for teachers. The teacher can create a new group by
using the “Create New Group” button provided at the top of the list. It is also possible to edit
the properties of an existing group or delete it by using other buttons located in the
mentioned area. To control the project works and learning activities of a chosen project
group, the teacher must click on its name and open the “Project Management” panel.

The Project Management panel is the most important part of the developed system
because teachers can use it to control the learning process of each project group. This panel
is divided into three sections titled “Project Summarize”, “Group Options” and “Project
Options”. Figure 1 shows a screenshot of both the teacher mode interface and the Project
Management panel.

Figure 1. Teacher mode interface and the project management panel.

The Project Summarize section shows some information about the existing project work. In
this section, there is an indicator that shows the completed percentage of the project work.
This indicator is automatically changed according to the rate of active and passive /
completed tasks. Under the indicator, the deadline of the project work is shown. The teacher
can change the deadline by using the button located in this area. In addition to these tools,
some statistical information about active and passive / completed tasks and sent
announcements are also shown on the Project Summarize section.

The Group Options section is located near the Project Summarize section. There are three
links provided in the Group Options section. By using “View Members” link, the teacher can
see a list of members / students that take part in the project group. The teacher can add a new
member or delete an existing member by using the controls provided in this list. Profile
information of each member / student can also be viewed by clicking on user names. The
second link: “Announcements” can be used to open “Announcement Management” page.
Teachers can use this page to send announcement messages for group members or edit /
delete existing announcements that were made before. The third link: “Project Tasks” is used
to open another page, which is titled as “Task Management”. Figure 2 shows a screenshot of
the Task Management page.

Figure 2. Task management page of the system.

There are two-tab controls provided on the Task Management page. The first tab:
“Task List” can be used to view a list of past project tasks. On the other hand, the second tab:
“New Task” enables teachers to arrange new project tasks for each group member. By using
the provided controls, the teacher can define a period to finish the new task and choose a
group member, who will perform this task. Furthermore, the teacher can state some
requirements that must be performed to complete the given task. The system provides some
predefined requirements but it is possible to define new requirements manually. While
working on a project file, the website editor of the system can control the predefined
requirements and warn the student to complete these requirements. So, it is important to state
predefined requirements while creating a new project task. Table 1 shows the predefined
requirements provided by the system.
 Table 1. Predefined requirements provided by the system

The last section on the Project Management panel is titled as “Project Options”. This
section is located under the Group Options section. Teachers can examine and evaluate the
prepared project files by using the links provided in the Project Options section. With the
“View Files” link, the teacher can view a list of project files that were prepared and added by
group members. By clicking on icons, each file can be opened with default programs
installed on the operating system. The teacher can also arrange specific programs to open
unknown files by right-clicking on file icons. The file list gives detailed information on disk
size, creation date, and creator of each file. The second link: “Evaluate Project Tasks”
enables teachers to evaluate project files and give feedback to group members for future
activities. After clicking on this link, a new page, which includes a list of active project tasks,
can be viewed. By using this window, the teacher can examine and evaluate the task files.
Evaluation results and comments about the completed tasks can also be sent to the group
members by using the provided controls on this window.

Teachers’ management activities also include setting system options and managing
student accounts. By using the “System Options” button located on the Tools bar, the teacher
can open a new page, where he/she can set some features and functions of the system and
organize the student accounts. On this page, the teacher can give a size limit for uploaded
files, set the color of some system interfaces, change the places of some buttons, and disable
some system tools. The teacher can also see a list of all students, edit their usernames and
passwords, delete student accounts, and add a new student to the system by using the same
window.

System activities

In addition to the management activities, teachers can also perform some personal
activities on the system. These activities are performed by using some links and controls
provided on the User Info Panel and Tool Panel (Figure 3). They can edit profile information
by using the “User Info” window. This window can be viewed by clicking on the photo
located on the User Info Panel. The teacher can change his / her user password, faculty,
department, and contact information by using the controls provided in the User Info window.
It is also possible to upload a new photo file to be viewed on the system interface.
 Figure 3. A closer look at the User Info Panel and the Tool Panel.

In the system, some widget applications are provided for personal use. These widgets
include a personal agenda, calendar, clock, music player, and a small mind game. Each
widget can be viewed by clicking on the icons located on the Tool Panel. The teacher can use
widgets to facilitate management activities or ensure a more enjoyable working environment.

The developed system provides a private message module that both teachers and
students can use to contact other teachers and students. The private message module can be
viewed by clicking on the “envelope” icon located on the User Info Panel. This icon also
shows the number of unread private messages. The private message module provides a rich
text editor that enables teachers to prepare interactive messages and send file attachments.

Teachers can use the forum tool to discuss about topics related to project groups,
project works, learning activities, and system features. Students are only allowed to post new
messages to forum topics whereas teachers can post new messages and create new forum
topics. In the system, teachers are employed as moderators of the forum tool. So, they must
control the post flow of the whole forum tool. After creating a project group, new topics
about the group and the project work are automatically created by the forum tool. This tool
can be viewed by clicking on the forum icon located on the Tool Panel.

Student activities on the system

As mentioned before, interfaces of teacher and student modes were designed similarly to
ensure easy experiences for both teachers and students. In other words, students use the same
system panels and similar tools as teachers. Student activities can be examined under two
titles: “Learning Activities” and “System Activities”. System activities include using the
forum tool, private message module, and widget applications and editing profile information.
Both teachers and students perform these activities in the same ways. So, there is no need to
explain system activities again. At this point, it is more important to focus on student
learning activities performed on the developed system.

Learning activities

In the developed system, students perform their project-based learning activities by using the
“Project Group” panel. After the login process, this panel is viewed automatically in the
Activity Panel of the student mode. The structure of the Project Group panel is similar to the
Project Management panel used in the teacher mode.
The Project Group panel is divided into four sections named “Announcements”, “Project
Info”, “Project and Group Options” and “Project Task Flow”. Figure 4 shows a screenshot of
both the student mode interface and the Project Group panel.

Figure 4. Student mode interface and the project group panel.

The Announcements section enables students to view the latest announcements added by the
teacher to the project group interface. In this section, only titles of new announcements are
viewed for students. However, the student can view the details of any announcement by
clicking on its title.

The second section of the Project Group panel is Project Info. This section was formed
as similar to the Project Summarize section provided in the Project Management panel of the
teacher mode. In this section, the deadline of the project work is shown first. Under the
deadline information, an indicator, which shows the completed percentage of the project
work, is shown. As mentioned before, this indicator is automatically changed according to
the rate of active and passive / completed tasks. The Project Info section also shows some
information about the number of active and passive/completed tasks.

The third section of the Project Group panel is named Project and Group Options.
There are two links provided in this section. By using the “View Members” link, a list of
project group members can be viewed. This list also enables students to see the profile
information of each member and send private messages to them. With the other link: “View
Files”, the student can view a list of project files that were prepared and added by group
members. As it is understood, the functions of these links are similar to the ones provided in
the Project Management panel of the teacher mode.

The last section of the Project Group panel is used to track project task flow and
perform the given tasks. In this section, the student can see a list of project tasks that were
given to him/her by the teacher. It is also possible to see other group members’ tasks by
using this list. The student can start to work on any project task by clicking on its name.
After clicking on any task name, a new web page, which is also titled “Project Task”, can be
opened (Figure 5). On this page, the period and requirements to achieve the task are
explained. With the “Upload” button located on the page, the student can upload a file to the
system. This file could be an HTML or PHP file, which corresponds to the given project
task, or an additional file that explains the features of the completed task. Thus, the student
has a chance to design and code the task file by using an external website editor. However, it
is recommended to use the internal website editor of the developed system because it
includes some coding editors to help students on writing HTML, JavaScript, and PHP codes.
Moreover, students can use ready templates and scripts that come with this editor. Web site
editor of the developed system is named “PBL-Web”.

Figure 5. Project task page of the system.

PBL-Web can be opened by using the “Editor” button provided on the Project Task
page. PBL-Web has a simple interface that enables students to create HTML or PHP files
easily. By using the “File” menu, the student can create a new blank file, open an existing
file, or use ready website templates for the work. It is also possible to save the work or
preview it by using the default web browser. PBL-Web provides a toolbar that can be used to
insert web elements into the work area. It is also possible to edit properties of added
elements by using the “Properties Bar” located underside of the editor. PBL-Web enables
students to work on the file by using three different viewing modes. The student can work
with design mode, code mode, or with a combination of design and code modes. This feature
was inspired by the well-known website editor: Adobe Dreamweaver.

The most important feature of the PBL-Web is that it provides some coding editors to
help students write web programming codes in the work area. While working on the file,
these editors can watch the written codes, warn the student about wrong written codes, and
give some suggestions to correct these codes. This feature was developed based on Ohlsson’s
theory of learning from errors (Ohlsson, 1994). For now, PBL-Web provides three different
coding editors for HTML, Java Script and PHP. These editors can be enabled or disabled by
using the “Coding Editor” menu. Figure 6 shows a screenshot of the PBL-Web.

Figure 6. PBL-Web: Web editor of the developed system.

As mentioned before, the student can save the latest form of project file by using the File
menu. The file is automatically saved to the system database to be evaluated by the teacher.
However, the student must click on the “Approval” button to inform the teacher about the
completion date and time of the task. After the approval, the student cannot edit the task files
again.

Both teachers and students can perform the explained activities to achieve a successful
project-based learning process. The developed system employs effective features and
functions, which enable teachers to reach this aim. However, the system must be tested to
evaluate its effects on students’ learning process and perform project-based learning
activities. This can be done with the evaluation process.

4. EVALUATION

The developed system was used in a vocational high school during one term. At the end of
the term, a survey was conducted to find out to what extent the students were accepting the
developed web-based system for project-based learning activities. A list of 50 statements,
which forms the core of the survey, was prepared. The prepared survey was anonymous and
the number of respondents to the survey was 110 students. All students who enrolled for the
web design and programming course have attended this survey. In the survey, students were
asked to express their opinions on the Likert scale, checking 1 if they strongly disagree, 2 if
they disagree, 3 if they have no clear opinion, 4 if they agree, and 5 if they strongly agree
with the given statement.
4.1. Survey results

Survey results show that the students were satisfied with the developed web-based system
and the realized approach for project-based learning activities. Some statements from the
conducted survey and responses given for these statements are shown in Table 2.
Table 2. Some statements from the survey and responses

The obtained results show that eighty-nine percent of students are satisfied with the web-
based system developed in this study. According to eighty percent of students, the system
provides an efficient project-based learning platform and enables students to have better
learning experiences. Ninety-two percent of students think that the PBL-Web is the most
effective part of the system. Eighty-one percent of students are satisfied with the project
tasks given for the web design and programming course. The results also show that ninety-
one percent of students prefer this approach of project-based learning to other methods that
were developed for web design and programming courses. About ninety percent of students
also think that the system should include some customization tools that enable teachers to
use it for other courses given at the Information Technologies program of vocational high
schools.

4.2. Other results

In addition to the survey, students’ project works were also evaluated to have more idea
about the success of the developed system. According to the results, about ninety-five
percent of project groups have completed the given project works on time. The teacher has
evaluated the project works on some criteria like completing date and time, number of the
completed project tasks, rate of the completed requirements of each project task, and code
structures of the project works. The grade of any project group was determined according to
these criteria. On the other hand, each group member’s grade was determined according to
their performance on their project tasks. All grades were determined on a 100-point scale. In
the last step, each member’s final grade was determined by summing forty percent of the
group grade and sixty percent of the member grade. The student’s average grade was 92.7 on
the 100-point scale. With good average grade, the developed system and the realized
approach is considered as successful.
5. CONCLUSIONS AND FUTURE WORKS:

This paper describes using features and functions of a web-based system, which was
designed and developed to support project-based learning activities in the “Web Design and
Programming” course given at the Information Technologies program of vocational high
schools. In this sense, course features, developed systems, online project-based learning
activities, and study results are explained.

According to the results, students were satisfied with the developed web-based system
and the implemented approach for project-based learning activities. By using the system,
students’ academic achievements can be improved greatly. Students’ responses to the
conducted survey and obtained academic results also show that the system provides an
efficient and advanced web environment where students have effective learning experiences
in website designing and programming.

Concerning future works for the development of the system, an online video
conference module is currently being developed. In addition to the private messaging
module, the online video conference module will allow both students and teachers to take
part in live meetings by using their webcams. With this module, teachers will have a chance
to conduct live meetings about the given course and present visual works (slide shows, video
files…etc.) or course documents by using some advanced tools. As a result, the
communication features and functions of the system will be improved by using the online
video conference module for project-based learning activities.

There are also some works to develop an advanced control module that can be used by
teachers to check students’ learning activities and project works on the system. This module
will include some tools that are supported by artificial intelligence techniques to watch
students’ learning activities and evaluate prepared project works automatically. With the
module, teachers will also be able to revise their past management activities on the system.

Another future work on the system is to add some customization tools to the system.
By using these tools, teachers will be able to adjust some features of the system to use it for
other courses given at the Information Technologies program of vocational high schools.

6. REFERENCES:

 Bransford, J. D., & Stein, B. S. (1993). The IDEAL problem solver. (2nd ed.). New
York: Freeman.
 Blumenfeld, P. C., Soloway, E., Marx, R. W., Krajcik, J. S., Guzdial, M., & Palinscar,
A. (1991). Motivating project-based learning sustaining the doing, supporting the
learning. Educational Psychologist, 26 (3 - 4), 369 - 398.
 Buck Institute for Education (2007). Introduction to project-based learning. Retrieved
October 3, 2009, from http://www.bie.org/files/BIE_PBLintro.pdf
 Curtis, D. (2002). The power of projects. Educational Leadership, 60 (1), 50 - 53.
 Gultekin, M. (2007). The effect of project-based learning on learning outcomes in the
fifth-grade science education. Elementary Education Online, 6 (1), 93 - 112.
 Harris, J. H., & Katz, L. G. (2000). Young investigators: The project approach in the
early years. New York: Teachers College Press.
 Liu, M., & Hsiao, Y. (2002). Middle school students as multimedia designers: A
project-based learning approach. Journal of Interactive Learning Research, 13 (4), 311
- 337.
 Moursund, D. G. (2001). Problem-based learning and project-based learning.
Retrieved October 18, 2009, from http://www.uoregon.edu/~moursund/Math/pbl.htm
 Moursund, D., Bielefeldt, T., & Underwood, S. (1997). Foundations for the road
ahead: Project-based learning and information technologies. Retrieved October 12,
2009 from
https://www.iste.org/content/navigationmenu/research/reports/the_road_ahead_backgr
ound_papers_1997_/projectbased_learning.htm#Characteristics
 Nastu, J. (2009). Project-based learning. e-School News, 1, Retrieved October 13,
2009, from https://www.eschoolnews.com/media/files/eSNProject-Based
Learning0109.pdf
 Ohlsson, S. (1994). Constraint-based student modeling. In J. E. Greer, & G. I.
McCalla (Eds.), Student modelling: The key to individualized knowledge-based
instruction (pp. 167 - 189). Berlin: Springer.
 Peterson, S. E., & Myer, R. A. (1995). The use of collaborative project-based learning
in counselor education. Counselor Education & Supervision, 35 (2), 150 - 158.
 Project-based Learning - Center for Occupational Research and Development. (2004)
Retrieved October 15, 2009, from http://www.cord.org/project-based-learning/ Project
Based Learning: The Online Resource for PBL (2007).
 Project based learning - frequently asked questions. Retrieved October 11, 2009, from
http://pbl-online.org/faqs/faqs.htm
 Sert, A. (2006). The effect of project based learning approach to the logical thinking
ability and attitude of students in science lesson. Retrieved October 20, 2009, from
Çukurova University, Institute of Social Sciences Web site:
http://sosyalbilimler.cu.edu.tr/tezler/955.pdf
 Wong, A. J. A. (2006). Benefits of teamwork: A case study of project-based learning.
Retrieved October 2, 2009, from Academy of Art University Web site:
http://faculty.academyart.edu/assets/faculty/PBL_Notes.pdf

THANK YOU!