10.83 S 766 by Pass Valve PRV Set

BY PASS VALVE - PRV SET
IPS CARBON STEEL PIPE – FIRE PROTECTION VALVES 10.83

FireLock® High Pressure Butterfly Valve MEA: 276-99-E CSFM: 7770-0531:113
SERIES 766 BUTTERFLY VALVE (SUPERVISED CLOSED)

INCLUDES WEATHERPROOF ACTUATOR
The Series 766 high pressure butterfly valve features a weatherproof actuator housing
approved for indoor or outdoor use. It has been developed for fire pump metering test
lines, per NFPA 20 and rooftop test units, as well as pressure reducing valve by-pass
lines per NFPA 14. The Series 766 has a ductile iron body and disc with Nitrile seats.
Designed for fire protection services only. Contact Victaulic for details of agency approv-
als. The Series 766 Butterfly Valve is designed to be SUPERVISED CLOSED. Under
normal operating conditions, this valve will be CLOSED, and the internal limit switches will
supervise the valve only in the CLOSED position. The valve will be in the open position
only during system testing and maintenance.
This supervised closed Series 766 Butterfly Valve should NOT be installed where fluid
flow is required as part of normal system operation.
APPROVALS AND LISTINGS
Approval/Listing Service Pressures

Series 766 Butterfly Valve
cULus FM VdS
2"/50mm up to 365psi/2517kPa up to 365psi/2517kPa up to 365psi/2517kPa
2 1/2"/65mm up to 365psi/2517kPa up to 365psi/2517kPa n/a
76.1mm up to 365psi/2517kPa up to 365psi/2517kPa up to 365psi/2517kPa
108mm up to 365psi/2517kPa up to 365psi/2517kPa n/a
5"/125mm up to 365psi/2517kPa up to 365psi/2517kPa n/a
139.7mm up to 365psi/2517kPa up to 365psi/2517kPa up to 365psi/2517kPa
165.1mm up to 365psi/2517kPa up to 365psi/2517kPa n/a
JOB/OWNER CONTRACTOR ENGINEER

System No.___________________________ Submitted By_________________________ Spec Sect_____________ Para___________
Location_ ____________________________ Date ________________________________ Approved_ ___________________________
Date ________________________________
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2010 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
REV_B 10.83_1
FireLock® High Pressure Butterfly Valve
MATERIAL SPECIFICATIONS Body: Ductile iron conforming to ASTM A-536, grade 65-45-12
End Face, 2 – 6"/50 – 150 mm: Ductile iron conforming to ASTM A-536, grade 65-45-12
Seal Retainer, 8"/200mm: Ductile iron conforming to ASTM A-536, grade 65-45-12
Coating: Black alkyd enamel
Disc: Ductile iron conforming to ASTM A-536, grade 65-45-12, with electroless nickel coating con-
forming to ASTM B-733
Seat:
• Grade “T3” Nitrile
Stems: 416 stainless steel conforming to ASTM A-582
Stem Seal Cartridge: C36000 brass
Bearings: Stainless Steel with TFE lining
Stem Seals: Nitrile
Stem Retaining Ring: Carbon steel
Actuator:
• 2 - 8"/50 - 200mm: Brass or bronze traveling nut on a steel lead screw, in a ductile iron housing
www.victaulic.com
10.83_2 REV_B
DIMENSIONS –
Size Dimensions – Inches/millimeters
ØH
Outside End to
Size Diameter End
C A B C D E F G DIA H J
2" 2.375 4.25 2.28 6.41 4.00 4.22 4.50 2.12
— —
60.3 mm 60.3 108.0 57.9 162.8 101.6 107.2 114.3 53.8
2½" 2.875 3.77 2.28 7.54 4.00 4.22 4.50 1.77

— —
73 mm 73.0 95.8 57.9 191.5 101.6 107.2 114.3 45.0
B 3.000 3.77 2.28 7.54 4.00 4.22 4.50 1.77

— —
76.1 mm 76.1 95.8 57.9 191.5 101.6 107.2 114.3 45.0
F J 3" 3.500 3.77 2.53 7.79 4.50 4.22 4.50 1.77
G E A D — —
88.9 mm 88.9 95.8 64.3 197.9 114.3 107.2 114.3 45.0
4.250 4.63 2.88 8.81 5.50 4.22 4.50 2.20

— —
108 mm 108.0 117.6 73.2 223.8 139.7 107.2 114.3 55.9
4" 4.500 4.63 2.88 8.81 5.50 4.22 4.50 2.20

— —
114.3 mm 114.3 117.6 73.2 223.8 139.7 107.2 114.3 55.9
ØH 5.250 5.88 3.35 10.88 6.56 6.19 6.30 2.58
— —
133 mm 133.0 149.4 85.1 276.4 166.6 157.2 160.0 65.5
C
5.500 5.88 3.35 10.88 6.56 6.19 6.30 2.58
— —
139.7 mm 139.7 149.4 85.1 276.4 166.6 157.2 160.0 65.6
5" 5.563 5.88 3.35 10.88 6.56 6.19 6.30 2.58

— —
141.3 mm 141.3 149.4 85.1 276.4 166.6 157.2 160.0 65.5
6.250 5.88 3.84 11.38 — 0.41 7.52 6.19 6.30 2.58

B 159 mm 159.0 149.4 97.5 289.1 10.4 191.0 157.2 160.0 65.5
6.500 5.88 3.84 11.38 0.41 7.52 6.19 6.30 2.58

J 165.1 mm 165.1 149.4 97.5 289.1 — 10.4 191.0 157.2 160.0 65.5
G E A D
6" 6.625 5.88 3.84 11.38 — 0.41 7.52 6.19 6.30 1.90
168.3 168.3 149.4 97.5 289.1 10.4 191.0 157.2 160.0 48.3
8" 8.625 5.33 5.07 13.53 0.80 1.47 10.00 6.19 8.1 2.33
219.1 mm 219.1 135.4 128.8 343.6 20.3 37.3 254.0 157.2 205.7 59.2
www.victaulic.com
REV_B 10.83_3
PERFORMANCE The chart expresses the frictional resistance of Victaulic Series 766 Supervised CLOSED High
Pressure Butterfly Valve in equivalent feet/meters of straight pipe.
Size Size
Actual Actual
Nominal Outside Nominal Outside
Size Diameter Equiv. Size Diameter Equiv.
Inches Inches Feet/m Inches Inches Feet/m
mm mm of Pipe mm mm of Pipe
2 2.375 6 6 6.625 14
50 60.3 1.8 150 168.3 4.2
2 1/2 2.875 6 14
159 mm 159 mm
65 73.0 1.8 4.3
3.000 6 6.500 14
76.1 mm 165.1 mm
76.1 1.8 165.1 4.2
3 3.500 7 8 8.625 16
80 88.9 2.1 200 219.1 4.9
4 4.500 8
100 114.3 2.4
8
108 mm 108 mm 2.4
5 5.563 12
125 141.3 3.7
12
133 mm 133 mm 3.7
5.500 12
139.7 mm 139.7 3.7
www.victaulic.com
10.83_4 REV_B
PERFORMANCE CV values for flow of water at +60°F/+16°C with a fully open valve are shown in the table below. For
additional details, contact Victaulic.
Formulas for CV Values:
∆P = Q2 Where:
Cv2 Q = Flow (GPM)
∆P = Pressure Drop (psi)
Q = Cv x ∆P Cv = Flow Coefficient
Size CV Size CV Size CV

Actual Actual Actual
Nominal Outside Nominal Outside Nominal Outside
Size Diameter Size Diameter Size Diameter
Inches Inches Inches Inches Inches Inches
mm mm (Full Open) mm mm (Full Open) mm mm (Full Open)
2.375 5 5.563 8 8.625
2 170 1200 3400
60.3 125 141.3 200 219.1
2 1/2 2.875
260 133 mm 133 mm 1200
65 73.0
3.000 139.7 mm 5.500
76.1 mm 260 1200
76.1 139.7
3 3.500 6 6.625
440 1800
80 88.9 150 168.3
4 4.500
820 159 mm 159 mm 1800
100 114.3
6.500
108 mm 108 mm 820 165.1 mm 1800
165.1
Formulas for K V Values:

∆P = Q2 Where:
Q = Flow (hr. )
m3
Kv
Q = Kv x ∆P ∆P = Pressure (bar)
Kv = Flow Factor
Size KV Size KV Size KV

Actual Actual Actual
Nominal Outside Nominal Outside Nominal Outside
Size Diameter Size Diameter Size Diameter
Inches Inches Inches Inches Inches Inches
mm mm (Full Open) mm mm (Full Open) mm mm (Full Open)
2.375 5 5.563 8 8.625
2 147 1040 2940
60.3 125 141.3 200 219.1
2 1/2 2.875 133 mm 133 mm
225 1040
65 73.0
3.000 139.7 mm 5.500
76.1 mm 225 1040
76.1 139.7
3 3.500 6 6.625
380 1560
80 88.9 150 168.3
4 4.500
710 159 mm 159 mm 1560
100 114.3
6.500
108 mm 108 mm 710 165.1 mm 1560
165.1
www.victaulic.com
REV_B 10.83_5
SWITCH AND WIRING 1. The supervisory switch contains two single pole, double throw, pre‑wired switches.
2. Switches are rated:
10 amps @ 125 or 250 VAC/60 Hz
0.50 amps @ 125 VDC
0.25 amps @ 250 VDC
3. Switches supervise the valve in the “CLOSED” position.
4. One switch has two #18 insulated wires per terminal, which permit complete supervision of leads
(refer to diagrams and notes on this page). The second switch has one #18 insulated wire per
terminal. This double circuit provides flexibility to operate two electrical devices at separate
locations, such as an indicating light and an audible alarm, in the area that the valve is installed.
5. A #14 insulated ground lead (green) is provided.
Switch #1 = S1 For connection to the supervisory circuit of a UL
Listed alarm control panel
Switch #2 = S2 Auxiliary switch that may be connected to auxiliary
devices, per the authority having jurisdiction
S1
{ Normally Closed: (2) Blue
Common: (2) Yellow
{
Normally Closed: Blue with Orange Stripe
S2 Normally Open: Brown with Orange Stripe
Common: Yellow with Orange Stripe
UL LISTED
JUNCTION BOX
CONDUIT
½" NPT
CONDUIT CONNECTORS
WIRE NUTS
FIRE ALARM TO END-OF-LINE RESISTOR,

CONTROL PANEL OR NEXT INDICATOR
SUPERVISORY
CIRCUIT
N.C. NO. COM.
SWITCH
CONTACT RATING:
10A AT 125 AND S1
250VAC,
0.5A AT 125 VDC,
0.25 AT 250 VDC
S2 BELL
OR
VOLTAGE SOURCE HORN
Switch 1: 2 leads per terminal

Switch 2: 1 lead per terminal
NOTE:
The above diagram shows a connection between the common terminal (yellow – S1 and yellow-with-
orange stripe – S2) and the normally closed terminal (blue – S1 and blue-with-orange strip – S2). In
this example, the indicator light and alarm will stay on until the valve is fully CLOSED. When the valve
is fully CLOSED, the indicator light and alarm will go out. Cap off any unused wires (e.g. brown with
orange stripe).
Only S1 (two leads per terminal) may be connected to the fire alarm control panel.
The connection of the alarm switch wiring shall be in accordance with NFPA 72 and the auxiliary
switch per NFPA 70 (NEC).
www.victaulic.com
10.83_6 REV_B
WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details.
NOTE This product shall be manufactured by Victaulic or to Victaulic specifications. All products to be
installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the
right to change product specifications, designs and standard equipment without notice and without
incurring obligations.
INSTALLATION Reference should always be made to the installation sheet included with the valve. Verify you have
the latest revision by visiting our website at www.victaulic.com. Further reference can be found in the
I-100 Victaulic Field Installation Handbook.
For complete contact information, visit www.victaulic.com

10.83 5664 REV B UPDATED 9/2010
10.83

10.83 S 766 by Pass Valve PRV Set

Uploaded by

Copyright:

Available Formats

10.83 S 766 by Pass Valve PRV Set

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

10.83 S 766 by Pass Valve PRV Set

Uploaded by

Copyright:

Available Formats

BY PASS VALVE - PRV SET

IPS CARBON STEEL PIPE – FIRE PROTECTION VALVES 10.83

SERIES 766 BUTTERFLY VALVE (SUPERVISED CLOSED)

APPROVALS AND LISTINGS

Approval/Listing Service Pressures

JOB/OWNER CONTRACTOR ENGINEER

Coating: Black alkyd enamel

• Grade “T3” Nitrile

Stems: 416 stainless steel conforming to ASTM A-582

Stem Seal Cartridge: C36000 brass

Bearings: Stainless Steel with TFE lining

Stem Seals: Nitrile

Stem Retaining Ring: Carbon steel

Size Dimensions – Inches/millimeters

2½" 2.875 3.77 2.28 7.54 4.00 4.22 4.50 1.77

B 3.000 3.77 2.28 7.54 4.00 4.22 4.50 1.77

4.250 4.63 2.88 8.81 5.50 4.22 4.50 2.20

4" 4.500 4.63 2.88 8.81 5.50 4.22 4.50 2.20

5" 5.563 5.88 3.35 10.88 6.56 6.19 6.30 2.58

6.250 5.88 3.84 11.38 — 0.41 7.52 6.19 6.30 2.58

6.500 5.88 3.84 11.38 0.41 7.52 6.19 6.30 2.58

Size CV Size CV Size CV

Formulas for K V Values:

Size KV Size KV Size KV

FIRE ALARM TO END-OF-LINE RESISTOR,

Switch 1: 2 leads per terminal

For complete contact information, visit www.victaulic.com

You might also like