Ws c296024tc S Datasheet

WS-C2960+24TC-S Datasheet
Check its price: Click Here
Overview
Cisco Catalyst 2960-Plus 24 Ports LAN Lite Switches, supporting 24 x 10/100 ports, are designed for branches, conventional office workspaces,
and infrastructure networks.
Quick Specs
Figure 1 shows the appearance of the WS-C2960+24TC-S.
Table 1 shows the Quick Specs.
Product Code WS-C2960+24TC-S
Enclosure Type 1 RU
Feature Set LAN Lite
Uplink Interfaces 2 (SFP or 1000BASE-T)
Ports 24 x 10/100 Ethernet Interfaces
Forwarding Bandwidth 16 Gbps
DRAM 128 MB
Flash Memory 64 MB
Dimensions 4.4 x 45.0 x 24.2 cm
Package Weight 7.73 Kg
Product Details
Figure 2 shows the front panel.
Note:
(1) Switch LEDs
(2) Mode button
(3) 24*10/100 ports
(4) Dual-purpose ports
·The switch LEDs include SYST, RPS, Status, Duplex and Speed LED.
·Dual-purpose portssupportSFP or 1000BASE-T uplink port.
Figure 3 shows the back panel.

Here takes WS-C2960+24TC-L for reference. Pay attention that WS-C2960+24TC-S does not has an RPS connector.
Note:
(1) RJ-45 console port

(2) Fan exhaust
(3) RPS connector
(4) AC power connector
Figure 4 shows the unboxing view of WS-C2960+24TC-S.
The Accessories
Table 2 shows the accessories of the WS-C2960+24TC-S.
Models Description
CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F
GLC-LH-SM GE SFP, LC connector LX/LH transceiver
GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM
Get more information

Do you have any question about the Cisco Catalyst C2960+24TC-S switch?
Contact us now via Live Chat or [email protected].
Speciﬁcation
WS-C2960+24TC-S Specification
Configurations
10/100
Ethernet 24
Interfaces
Uplink
2 (SFP or 1000BASE-T)
Interfaces
Cisco IOS
Software LAN Lite
Feature Set
Available PoE None
Power
Hardware
Flash memory 64 MB
DRAM 128 MB
Performance and Scalability
Forwarding
16 Gbps
bandwidth
Maximum
64
active VLANs
VLAN IDs
4K
available
Maximum
transmission
9000 bytes
unit (MTU) -
L3 packet
Jumbo frame -
Ethernet 9018 bytes
frame
Forwarding
Rate: 64-Byte
L3 Packets,
6.5
Millions of
packets per
second
Mechanical
Dimensions
1.73 x 17.70 x 9.52 in (4.4 x 45.0 x 24.2 cm)
(H x W x D)
Weight 8 lb (3.6 Kg)
Package
17.04 lb (7.73 Kg)
Weight
Environmental Ranges
Operating
temperature 23º to 113ºF
up to 5000 ft (-5º to 45ºC)
(1500 m)
Operating
up to 10,000 (-5º to 40ºC)
ft (3000 m)
Short-term
23º to 131ºF
exception at
(-5º to 55ºC)
sea level*
Short-term
exception up 23º to 122ºF
to 5000 feet (-5º to 50ºC)
(1500 m)*
Short-term
to 10,000 feet (-5º to 45ºC)
(3000 m)*
Short-term
to 13,000 feet (-5º to 40ºC)
(4000 m)*
Storage
up to 15,000 (-25º to 70ºC)
feet (4573 m)
Operating Up to 10,000 Feet

altitude (Up to 3,000 Meters)
Storage Up to 13,000 Feet

altitude (Up to 4,000 Meters)
Operating
relative 10% to 95% noncondensing
humidity
Storage
relative 10% to 95% noncondensing
humidity
Sound Typical, LpAm: 33

Pressure, dBA Maximum, LpAD: 36
Sound Power, Typical, LwA: 43

dbA Maximum, LwAD: 46
MTBF in
thousands of 667
hours
Connectors and Interfaces
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
Ethernet 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
Interfaces 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
Indicator LEDs Per-port status: Link integrity, disabled, activity, speed, and full duplex
System status, Port Status, RPS, link duplex, and link speed
Cisco Catalyst console cables:

Console
CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC.
Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
Power The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the
switch.
Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle.
Management and Standards Support

BRIDGE-MIB
CISCO-CABLE-DIAG-MIB
CISCO-CDP-MIB
CISCO-CLUSTER-MIB
CISCO-CONFIG-COPY-MIB
CISCO-CONFIG-MAN-MIB
CISCO-DHCP-SNOOPING-MIB
CISCO-ENTITY-VENDORTYPE-OID-MIB
CISCO-ENVMON-MIB
CISCO-ERR-DISABLE-MIB
CISCO-FLASH-MIB
CISCO-FTP-CLIENT-MIB
CISCO-IGMP-FILTER-MIB
CISCO-IMAGE-MIB
CISCO-IP-STAT-MIB
CISCO-LAG-MIB
CISCO-MAC-NOTIFICATION-MIB
CISCO-MEMORY-POOL-MIB
CISCO-PAGP-MIB
CISCO-PING-MIB
CISCO-POE-EXTENSIONS-MIB
CISCO-PORT-QOS-MIB
CISCO-PORT-SECURITY-MIB
CISCO-PORT-STORM-CONTROL-MIB
CISCO-PRODUCTS-MIB
CISCO-PROCESS-MIB
CISCO-RTTMON-MIB
CISCO-SMI-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-SYSLOG-MIB
Management CISCO-TC-MIB
CICSO-TCP-MIB
CISCO-UDLDP-MIB
CISCO-VLAN-IFTABLE
RELATIONSHIP-MIB
CISCO-VLAN-MEMBERSHIP-MIB
CISCO-VTP-MIB
ENTITY-MIB
ETHERLIKE-MIB
IEEE8021-PAE-MIB
IEEE8023-LAG-MIB
IF-MIB
INET-ADDRESS-MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-FLASH-MIB
OLD-CISCO-INTERFACES-MIB
OLD-CISCO-IP-MIB
OLD-CISCO-SYS-MIB
OLD-CISCO-TCP-MIB
OLD-CISCO-TS-MIB
RFC1213-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
SNMPv2-MIB
TCP-MIB
UDP-MIB
ePM MIB
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.1s
IEEE 802.1w
IEEE 802.1X
IEEE 802.1ab (LLDP)
IEEE 802.3ad
Standards IEEE 802.3af
IEEE 802.3ah (100BASE-X single/multimode fiber only)
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
RMON I and II standards
SNMP v1, v2c, and v3
RFC 768 - UDP

RFC 783 - TFTP
RFC 791 - IP
RFC 792 - ICMP
RFC 793 - TCP
RFC 826 - ARP
RFC 854 - Telnet
RFC 951 - Bootstrap Protocol (BOOTP)
RFC 959 - FTP
RFC 1112 - IP Multicast and IGMP
RFC 1157 - SNMP v1
RFC 1166 - IP Addresses
RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery
RFC 1305 - NTP
RFC 1492 - TACACS+
RFC 1493 - Bridge MIB
RFC 1542 - BOOTP extensions
RFC 1643 - Ethernet Interface MIB
RFC RFC 1757 - RMON
compliance RFC 1901 - SNMP v2C
RFC 1902-1907 - SNMP v2
RFC 1981 - Path MTU Discovery for IPv6
FRC 2068 - HTTP
RFC 2131 - DHCP
RFC 2138 - RADIUS
RFC 2233 - IF MIB v3
RFC 2373 - IPv6 Aggregatable Addrs
RFC 2460 - IPv6
RFC 2461 - IPv6 Neighbor Discovery
RFC 2462 - IPv6 Autoconfiguration
RFC 2463 - ICMP IPv6
RFC 2474 - Differentiated Services (DiffServ) Precedence
RFC 2597 - Assured Forwarding
RFC 2598 - Expedited Forwarding
RFC 2571 - SNMP Management
RFC 3046 - DHCP Relay Agent Information Option
RFC 3376 - IGMP v3
RFC 3580 - 802.1X RADIUS
Voltage and Power Ratings
Voltage
100 to 240 VAC
(Autoranging)
Current
0.4 - 0.2
(Amperes)
Frequency 50 to 60Hz
Power Rating
0.02
(kVA)
DC Input
Voltages (RPS 2A at 12V
Input)
0% traffic: 18.6
Power 10% traffic: 18.7
Consumption 100% traffic: 19.1
ATIS weighted average: 18.8
Safety and Compliance
Regulatory
Products should comply with CE Marking per directives 2004/108/EC and 2006/95/EC
Compliance
UL 60950-1 Second Edition

CAN/CSA-C22.2 No. 60950-1 Second Edition
Safety EN 60950-1 Second Edition
IEC 60950-1 Second Edition
AS/NZS 60950-1
47CFR Part 15 (CFR 47) Class A

AS/NZS CISPR22 Class A
CISPR22 Class A
EN55022 Class A
EMC - ICES003 Class A
Emissions VCCI Class A
EN61000-3-2
EN61000-3-3
KN22 Class A
CNS13438 Class A
EN55024
EMC - CISPR24
Immunity EN300386
KN24
Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU
Download Resource
Selection Decision
Cisco’s New Switch Selection Decision 2018
Support and Resources
Cisco Switch Catalyst 2960-Plus Series Datasheet
Transition Guide
Cisco Catalyst 2960/2960-SF/2960-S Series Transition Guide
Guide to Upgrade Cisco Access and Backbone Switch
Selecting Cisco Switches-Campus, Branch, Digital Building
Contact Us
Want to buy this series of products? please contact us:

● Tel: +1-626-239-8066 (USA) +852-3050-1066 / +852-3174-6166
● Fax: +852-3050-1066 (Hong Kong)
● Email: [email protected]
Order Now
GO to buy this product: https://www.router-switch.com/ws-c2960-24tc-s-p-5255.html

Ws c296024tc S Datasheet

Uploaded by

Copyright:

Available Formats

Ws c296024tc S Datasheet

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ws c296024tc S Datasheet

Uploaded by

Copyright:

Available Formats

WS-C2960+24TC-S Datasheet

Check its price: Click Here

Table 1 shows the Quick Specs.

Product Code WS-C2960+24TC-S

Feature Set LAN Lite

Uplink Interfaces 2 (SFP or 1000BASE-T)

Ports 24 x 10/100 Ethernet Interfaces

Forwarding Bandwidth 16 Gbps

Dimensions 4.4 x 45.0 x 24.2 cm

Package Weight 7.73 Kg

(1) Switch LEDs

(2) Mode button

(3) 24*10/100 ports

(4) Dual-purpose ports

·Dual-purpose portssupportSFP or 1000BASE-T uplink port.

Figure 3 shows the back panel.

(1) RJ-45 console port

(3) RPS connector

(4) AC power connector

Figure 4 shows the unboxing view of WS-C2960+24TC-S.

CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F

GLC-LH-SM GE SFP, LC connector LX/LH transceiver

GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM

Get more information

Contact us now via Live Chat or [email protected].

Performance and Scalability

Weight 8 lb (3.6 Kg)

Operating Up to 10,000 Feet

Storage Up to 13,000 Feet

Sound Typical, LpAm: 33

Sound Power, Typical, LwA: 43

Connectors and Interfaces

Cisco Catalyst console cables:

Management and Standards Support

RFC 768 - UDP

Voltage and Power Ratings

Safety and Compliance

UL 60950-1 Second Edition

47CFR Part 15 (CFR 47) Class A

Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU

Cisco’s New Switch Selection Decision 2018

Support and Resources

Cisco Switch Catalyst 2960-Plus Series Datasheet

Cisco Catalyst 2960/2960-SF/2960-S Series Transition Guide

Guide to Upgrade Cisco Access and Backbone Switch

Selecting Cisco Switches-Campus, Branch, Digital Building

Want to buy this series of products? please contact us:

You might also like