Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    Epilux 9 Phenolic Coating

    Uploaded by

    dinesh
    This document provides information on Epilux 9 Phenolic, a two-part epoxy phenolic coating designed for sustained immersion service in hydrocarbon cargoes at elevated temperatures. It has excellent chemical, water and solvent resistance. The coating is self-priming and can be applied by brush or airless spray. It is recommended for use as an interior tank coating in refineries, petrochemical plants, and other industrial facilities. Surface preparation involves cleaning and either sand blasting or grit blasting the surface, depending on the condition and requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Epilux 9 Phenolic Coating

    Uploaded by

    dinesh
    53 views2 pages
    This document provides information on Epilux 9 Phenolic, a two-part epoxy phenolic coating designed for sustained immersion service in hydrocarbon cargoes at elevated temperatures. It has excellent chemical, water and solvent resistance. The coating is self-priming and can be applied by brush or airless spray. It is recommended for use as an interior tank coating in refineries, petrochemical plants, and other industrial facilities. Surface preparation involves cleaning and either sand blasting or grit blasting the surface, depending on the condition and requirements.

    Original Title

    Epilux_9_Phenolic_Coating

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on Epilux 9 Phenolic, a two-part epoxy phenolic coating designed for sustained immersion service in hydrocarbon cargoes at elevated temperatures. It has excellent chemical, water and solvent resistance. The coating is self-priming and can be applied by brush or airless spray. It is recommended for use as an interior tank coating in refineries, petrochemical plants, and other industrial facilities. Surface preparation involves cleaning and either sand blasting or grit blasting the surface, depending on the condition and requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    53 views2 pages

    Epilux 9 Phenolic Coating

    Uploaded by

    dinesh
    This document provides information on Epilux 9 Phenolic, a two-part epoxy phenolic coating designed for sustained immersion service in hydrocarbon cargoes at elevated temperatures. It has excellent chemical, water and solvent resistance. The coating is self-priming and can be applied by brush or airless spray. It is recommended for use as an interior tank coating in refineries, petrochemical plants, and other industrial facilities. Surface preparation involves cleaning and either sand blasting or grit blasting the surface, depending on the condition and requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    BERdc

    BERGER
    Scope Epilux 9 Phenolic
    Protecton
    A two pack Solventless Epoxy Finish designed Coating

    Scope
    Uses
    A high performance Epoxy Phenolic
    tank liner for sustained immersion Recommended for use as a tank
    service in Hydrocarbon cargoes at interior coating (both mild steel and
    elevated temperature. The product is concrete) in refineries, petrochemicals,
    self priming and possesses excellent heavy chemicals and other plants.
    chemical, water and solvent resistance.

    Product Data
    Resistance Guide
    Type: Two pack, cured with Amine Adduct
    Chemical Resistance
    Composition: Catalyzed epoxy phenolic resin
    suitably pigmented Exposures Immersion
    Mixing Ratio: Base: Catalyst: 4: 1 by volume Acids Good
    Pot Life: 6-8 hours Alkalis Excellent
    Application: Brush or airless spray. Airless spray Solvent Excellent
    recommended for uniform and higher film build.
    Salt Excellent
    Recommended DFT: 100-150 microns per coat
    Water Excellent
    Corresponding WFT: 172-256 Microns per coat____

    Theoretical Spreading Rate: 3.9-5.8 sq. Mtr/Ltr Temperature Resistance:


    __________________________________________
    Drying time:
    Upto 160 degree C
    TOUCH: 2-3 hours
    HANDLE: 6-8 hours
    HARD: Overnight
    Flexibility: Moderate
    Curing Time: 7 days minimum
    Abrasion Resistance: Very Good
    Overcoating Interval: Min: Overnight
    Max: 5 days
    Flash Point: Below 22 degree C
    Colour: White, Lt Grey and Dk Grey
    Packing: 20 Ltrs.
    Thinner / Cleaner: Thinner 844
    Finish: Matt to Egg-shell Date Sheet No. 055/Rev 01
    __________________________________________
    Storage Life: Up to twelve months as long as the
    sealed containers are kept under cover in a dry place
    under normal temperature conditions.
    Surface Preparation
    Remove grease, oil and other contaminants preferably by using Bison Degreasing Solvent. Blast clean to a minimum Sa 2 ½ Swedish
    Standards SIS 05 5900. For severe corrosive conditions, blast to Sa 3 with a surface profile not exceeding 65 microns. The surface
    should be clean and dry before application of Epilux 9 Phenolic Coating.
    Concrete: New concrete: Ensure that the concrete is cured for a minimum of three months. The surface is to be made rough and free
    from laitance and other contaminants by sand sweeping. Old Concrete: Remove all salt deposits from the surface by water jet washing.
    Light sand blast the surface to remove all loosely bound coatings and roughening up of firmly adhering coatings to ensure anchorage
    with recommended system. Ensure all dust/other particles are fully removed by suction or air blast and the surface is fully clean and dry
    before application of Paint.

    Application

    Stir base thoroughly and then mix three parts of base and one part of catalyst by volume to a homogenous consistency.
    Allow the mixture to mature for 30 minutes and stir again before use and during application.
    Brush: Add upto 5% Thinner 844 during application.

    Airless spray: Apply preferably without thinning. However, if required, add upto 5% Thinner 844. Use any standard
    equipment having pump ratio 30:1. Tip size 0..43-0.48 mm. Tip pressure 110-160 Kg/ Sq cm

    Typical Painting Specifications


    Surface 1st coat 2nd coat 3rd coat
    --------------------------------------------------------------------------------------------------------------------------------------------------------

    Steel Epilux 610 Primer or Epilux 9 Phenolic Epilux 9 Phenolic


    Epilux 13 Primer or Coating Coating
    Zinc Anode 304

    -do- Epilux 9 Phenolic Coating - do -

    Concrete or Epilux 9 Phenolic Coating - do - - do -


    Plastered Surfaces (thin coat)

    Notes:
    1. Use off the mixed paint within the stipulated pot life Berger Paints India Ltd
    period BERGERHOUSE
    2. Do not apply when temperature falls below 10 degree C
    129 Park Street
    or rises above 50 degree C and when relative humidity
    rises above 90%. Do not apply during rain, fog or mist. Calcutta – 700 017
    3. Brushes and spray equipment should be cleaned with Tel: (033) 22299724 (5 lines)
    Thinner 844 otherwise equipment is likely to be 22499754 (4 lines)
    damaged. Fax: 91-33-22499729/22499009
    4. To achieve recommended film thickness and uniform
    finish, use airless spray. Mail:
    [email protected]
    Health & Safety - Please refer to the separate safety data
    sheet available with detailed information.

    Disclaimer
    Data Sheet No.055/ Rev 01
    The information contained herein within this data sheet is based on information
    believed to be reliable at the time of its preparation. The Company will not be
    liable for loss or damage howsoever caused including liability for negligence, Issue Date : Dec. 2003
    which may be suffered by the user of the data contained herein. It is the users’
    responsibility to conduct all necessary tests to confirm the suitability of any
    product or system for their intended use. No guarantee of results is implied since
    conditions of use are beyond our control.

    You might also like