Helpcard Online-Update Xentry Lite 1-0 en
Helpcard Online-Update Xentry Lite 1-0 en
Helpcard Online-Update Xentry Lite 1-0 en
Download and Installation of the Basic Setup Please click onto "Install" and then confirm the GTC:
The latest XENTRY Diagnosis Lite version will be provided online within the ordering
process via the B2B Connect Portal.
1. Click onto the link to download and unzip the Basic Setup.
Then, please click using the right mouse button onto the start.exe file and select "run
as administrator" to install the basic setup:
During the next two steps, click onto "Next" and then onto "Install":
After successfully completing the installation, please confirm by clicking "Finish". You
will be asked to restart your computer.
After selecting the hardware (see previous page) the welcome window will be displayed. II. Configuration of XENTRY Update Service
Please go onto the button "Configure" and click onto "Continue". Please navigate to "Configure XENTRY Update Service“ in ConfigAssist.
Select “Without Retail Data Storage” under Online data supply to receive updates over
the Internet (if you are using an RDS in your workshop, please connect it as usual).
Click onto “Test connection":
In the next window you can see information about product news. Now click on "Next"
until you come to "Install StartKey". Then read out the hardware ID under "Device Data"
to order your StartKey via LOT or the KBC, if you do not have a valid StartKey:
1234A1A12345
With existing Internet connectivity and server availability, XENTRY Update Service is
now connected to the backend servers. If the connection does not work immediately,
please repeat this step several times or restart your system.
PLEASE NOTE: After clicking on "Apply and continue" you will see this overview window:
As soon as you receive the StartKey E-Mail, you can install the StartKey right here ( you
can download the StartKey online/ import it via USB flash drive / enter it manually) (1):
Call up "XENTRY Update Service Control Center" via the start menu in the
Click onto the button “Apply and continue“. "Mercedes-Benz“ directory.
Version 07/2022
Internal
After completing the download, please click onto the button "Export" to save the Basic
Release on your hard drive and unpack the files.
Please repeat as you did with the Basic Setup, by clicking onto the start.exe file:
Information on the delivery package and accessories will then be displayed. Please
Please carry out the well-known installation steps, i.e.: click on "Continue".
- Language selection
- GTC confirmation
- Confirmation of data storage
location
- Start of the installation
Version 07/2022
Internal
In the next window, you can view information about new product features. If pairing is successful, click "OK" and remove the USB cable again. The computer
Click on the corresponding icons to do so. and VCI are now connected via WLAN.
Otherwise, click on "Continue". Click "Exit". XENTRY Diagnosis Lite is now fully configured.
Then you will see your valid StartKey. Click on the button "Apply & continue".
PLEASE NOTE:
For diagnosis with XENTRY Diagnosis Lite, you will require so-called time credits.
You can purchase these credits in the B2B Connect Portal:
https://b2bconnect.mercedes-benz.com under “Software” “Xentry
Diagnosis Lite”
After starting XENTRY Diagnosis and selecting the vehicle, you will see an
overview of available credits:
Version 07/2022