i

Forward
Filmmaking is all about making mistakes and learning from them.
There’s something to be said about spending countless hours in pre-
production and production only to end up with footage that didn’t
align with your creative vision. It sticks with you.

Almost every mistake that happens on a film could have been

avoided and a fundamental understanding of your craft is a great
place to start. As filmmakers, it’s our job to recognize these mistakes
and learn from them. It’s this creative problem solving that makes
filmmaking so great.

Even if you don’t like every filmmaking position, knowledge of how

all the necessary roles work together to create something amazing
can help you later on when you’re directing a feature of your own. At
the very least, a better understanding of your gear will free up time
on set to focus on storytelling, rather than figuring out how to
operate the camera.

So, if you’re feeling inspired to learn about filmmaking on a

fundamental level, we invite you to check out the contents of this e-
book. As with most things in filmmaking, the contents of this book
may change in the years to come, but the concepts will remain the
same.

Good luck and don’t give up!

PremiumBeat

ii
About the Authors
Noam Kroll Michael Maher
Noam Kroll is an award-winning LA based filmmaker Michael is an all-around tech and movie nerd who
and owner of the boutique production company, enjoys shooting, editing, and especially watching films
Creative Rebellion.

Jonny Elwyn Johnathan Paul

Jonny Elwyn is a freelance editor who has been living Johnathan Paul is a filmmaker, artist, and writer. He
and working in London, UK for the past 10 years. has written and directed several documentary and
fictional films.

Caleb Ward Danny Greer

Caleb Ward is the Online Content Manager for Danny Greer is a seasoned video editor, blogger, and
PremiumBeat.com. Caleb is an active filmmaker, website developer with a passion for all things media
photographer, and motion graphic designer in the and tech.
DFW area.

Matt Hibbard Tristan Kneschke

Matt Hibbard is an accomplished audio engineer, Tristan Kneschke is a freelance editor and colorist
editor, and producer for A/V projects in the DFW who operates NYC-based Exit Editorial.
area.

Rebecca Case Nicolai Yakimchuk

Rebecca Case is a Dallas-based producer and owner Nicolai Yakimchuk is the Performance Marketing
of the production company, Park Cities Film. Manager for PremiumBeat.com. Nicolai is a digital
marketer experienced in search campaigns and web
analytics.

iii
6
SECTION 1

How To Best Approach Your Indie Film Budget

Creating a budget for your film will guarantee that every dollar will be spent wisely.

A properly constructed budget will allow you to look critically at all To begin the budgeting process, break things down into the four
of your departments, which in turn provides you with much needed following major categories, all of which are standard to just about
clarity on critical decisions that need to be made throughout the any film budget:
process.
• Pre-Production: 10%
For example... How much do you need to set aside for star talent?
• Production: 35%
What elements can you (or should you) barter for? Is it better to
rent or buy gear? What can you get for free? What are the largest • Post-Production: 35%
unavoidable expenses?
• Distribution and Marketing: 20%

7
Understanding your needs ahead of time for each of these basic equipment that breaks or renting additional gear that will help you
components of the filmmaking process will keep you organized and get the most out of your shots.
ultimately make your life that much easier.
As mentioned earlier, the majority of film budgets (not including
Pre-Production huge blockbusters that spend most of their budget on marketing) are
Pre-production is comprised of all the items you must address in the spent during production. Regardless, designate about 35% of your
beginning phases of your production, up until the day you go to budget to actually shooting your film. As you will see in the sections
shoot your film. In this stage, your budget will account for items such that follow, both post-production and marketing deserve just as
as location scouting, insurance, office expenses, courier services, much attention and funding.
script fees, casting director rate, and just about anything else that
Post-Production
you need to pay for before actually getting to set.
Leave a healthy portion of your budget for post-production, even if
Theoretically, pre-production should be the easiest to predict in you aren’t making a heavily post-driven film, such as a VFX spectacle
terms of cost. If you’re shooting a low or micro-budget film, this or action movie. No matter what genre you’re working in, if you
stage will likely be the cheapest of the four components of your skimp out in post, your film will suffer and the money you spent in
budget: no more than 10%. production will be somewhat wasted. Post-production funds will go
toward your editor, colorist, sound designer, composer, and the rest
Production of your post team. Not to mention, you may need money for music
For films of any scale, production is often where the most amount of licensing, stock footage, and deliverables like a DCP for festival
money is spent, simply because there are more unavoidable costs screenings.
during this stage.
Allocate about 35% of your budget for post-production... the same
Big ticket items (paying your cast and crew, location permits, gear as your production budget. This may seem like a lot, and many
rentals, insurance, etc.) are all items that will necessarily need to eat filmmakers choose to put more into production, but you will be doing
into your budget. Other line items (catering, lodging, transportation your film a disservice by cutting corners in this department.
costs for cast and crew, makeup) are also big considerations, but
some of these can be mitigated by thinking outside of the box. For Your final audio mix alone is worth its weight in gold, as clean audio
instance, if you’re really on a shoestring budget, you might be able to will literally make your film more valuable when you go to sell it.
get a local catering company to sponsor your film, ultimately Some films get completely ruined in post-production because of a
bringing down your food line item. lack of funds… films with great scripts and great production/cast/
crew behind them. Without enough budget or time left over for post,
During production it’s wise to keep a “miscellaneous fund” that isn’t the final products just didn’t work.
accounted for in case you incur unforeseen expenses like repairing

8
Distribution and Marketing When you begin itemizing your expenses, be sure to gain a clear
Once you’ve got the final master of your film, it’s time to start understanding of what you can contribute to the process on your
pushing it out into the world. It’s rare that independent filmmakers own and who you can utilize in your network to lend your film a
allocate a sufficient amount of budget to marketing, but this should helping hand. After you’ve worked out these essential details, don’t
really never be the case. After all, without marketing dollars? No one forget to include some breathing room by creating a “contingency”
will ever see your movie. fund, which will go toward miscellaneous or unforeseen expenses
you may (and likely will) incur when setting out to make your film.
To start, you need to create a strategy to reach your audience and
eventually turn a profit. There are cost-efficient options such as
blogging or reaching out to other bloggers/online publications in
hopes that they will share your film’s trailer or write a review. As
well, social media outlets such as Facebook, Twitter, and Vimeo can
be instrumental in your film’s success on a grass roots level if you
really push things on those platforms.

That said, you will also want to account for the following marketing
items in your budget: a website for your film, screenings at various
theaters, film festival applications, local ad campaigns, and hiring a
publicist, if needed. Like any other phase mentioned here, make note
of what can be done on your own and what bartering options are
available to you within your network to keep your costs down. In any
case, do your best to allocate at least 20-30% of your funds to
marketing, and be prepared to do most of the leg work if you are
trying to keep the costs down.

There is no one-size-fits-all budget format, and ultimately you must

create a budget that is most in-line with your film’s needs. However,
it is essential that you create a well-thought-out, organized budget
for your project to ensure that all bases are covered when it comes
to the four important elements of filmmaking. Familiarizing yourself
with the film’s needs ahead of time will make the entire process (and
your life) easier.

9
SECTION 2

Five Tips For Casting Your Indie Film

All of these tips are focused on the creative aspects of casting. Their purpose is to help you get the right talent attached to your project – not necessarily
to provide a how-to guide for a casting call.

If you’ve never held a casting session, you’ll probably want to do the actors diligently, people bring in just about anyone that applies,
some homework before approaching the aspects of the process worried that the right actor will be missed.
described below. It’s very important that you know how to actually
The more people you bring into the audition, the less time you can
get actors into the room and how to run a casting session on a basic
spend with each of them. Why not pre-screen your talent by really
level. Once you’re able to nail the logistical side of it, you’ll be ready
going through their resumes and headshots beforehand, so that you
for the fun (but challenging) creative part. Let’s look at the tips:
can just bring in the people that you instinctively feel could be a
1. Don’t Do Cattle Calls good fit? This will mean more time with the right people and a
One of the most common mistakes filmmakers make is bringing way session that isn’t cluttered and confusing.
too many people into casting sessions. Rather than pre-screening

10
2. Direct as Much as Possible 4. Callbacks Are Key
If an actor doesn’t nail the first take of their audition, don’t just throw Never assume that you’ll find your talent on day one – even if you’re
them out of the audition room. More often than not, the actor in only casting a single person. Many directors are overly optimistic
front of you is much more capable than they may seem... they just before a casting session and make the mistake of not doing callbacks.
don’t “get” the scene. And can you really blame them? Often they are If there is one thing you absolutely have to do during the casting
given two or three pages of sides and are expected to play the role as process – it’s callbacks.
well as they would if they knew the script and character inside and
Callbacks will give you an opportunity to see a different side of the
out.
actors that you liked, try out new scenes with them, and bring in
Give some direction and don’t be afraid to do two or three takes if some new actors that couldn’t make the original auditions. At the
you need to. This advice is also true for actors that are nailing it right end of the day, it may be a bit of a pain to do a callback or two, but
off the bat. Give direction and feedback to see how they react to it. you’ll be a lot better off than if you only do a single day and wind up
This will help you gauge their versatility. casting the wrong person for your film.

Sometimes you’ll have an actor come in that is perfect for the scene, 5. Use a Casting Director (But Only Sometimes)
but maybe not the part, because they are not versatile enough. It’s pretty easy to hold a casting session yourself. Many filmmakers
who are on a tight budget will bypass using a traditional casting
3. Pair Actors Together
director for many reasons.
Traditionally, casting sessions can get pretty crammed. Even if you’re
more selective about who you bring in, you’re still bound to run Nonetheless, there are some situations where a casting director is a
behind at some point as actors pile up in the waiting room. The last great option, regardless of your budget. For instance, if you’ve held
thing you want to do in this situation is rush through auditions, as multiple casting sessions and no one was clicking for you, getting a
you’ll miss out on having the ability to give direction and see how the casting director involved will change everything. They can bring out
actors can really work. people that you wouldn’t otherwise have access to and will take care
of the difficult legwork for you. And if you do have a decent budget
The best solution to this situation is to start bringing in actors
to work with, it’s even more essential to use a casting director. They
together. If there is a three person scene and you have actors for
might get you access to name talent and they will be vital to your
each of the three characters in the waiting room, bring them all in. It
process in the end.
will make things more efficient and give you an even better view of
how your potential talent can work with other actors.

11
SECTION 3

The Three Elements That Make Most Micro-Budget Films Fail

Many up-and-coming filmmakers are scared to make a film with no budget. They often don’t have the experience to know how difficult it is to raise the
funding to make a film... and won’t even consider making one on a limited budget.

While there’s nothing wrong with aiming to raise a substantial we all know from watching studio produced films over the last
budget to make your first feature, the truth of the matter is that it’s several years, more money doesn’t necessarily translate to better
extremely difficult to do so, even for seasoned filmmakers. In order movies. If you’re eager to make a film, but money is tight, here are
to raise that kind of money, you need to have a calling card (usually three considerations that you should never overlook.
in the form of a low/no-budget project) so producers will trust you
with their money. 1. Story Is Everything
Technological breakthroughs in all the various facets of filmmaking
The good news is that making a film with little or no money can still have completely changed the world of cinema and digital
yield great results that are comparable to any well-funded film, so production. While, in many respects, these great advances have
long as you are creative and adopt a solid strategy for yourself. As opened up a new and exciting world for filmmakers from all walks of

12
life, I would argue that the quality of independent films has greatly filmmakers know how important great audio is, the audio
suffered over the past several years. department is one of the first things that’s compromised on low-
budget films.
It used to be that a great story/screenplay got your film made. But
with easy access to digital cinema cameras and post-tools, simply For smaller productions, try the Zoom H6 Handy Portable Digital
owning the right gear (or knowing someone with the right gear) is Recorder. It’s a relatively low-priced field recorder with most of the
enough to get your film made — even if it doesn’t have a fully features you’d find on similar (yet more expensive) recording
developed story. equipment. It takes 4 XLR inputs and has many of the same features
that you would find on a more professional audio recorder. In an
Understanding cinematography, editing, or particular uses for gear is
ideal world, you don’t want to be rolling your own audio. A dedicated
critical to your success as a filmmaker. However, your camera and all
sound recordist is always a far better choice. Nonetheless, in a pinch
the various ‘toys’ you utilize throughout production are simply there
you can get great results with a device like the Zoom H6 and a couple
to enhance your story. You may think that you need to hyper-focus
of quality mics.
on developing your skill set behind the camera in order for your film
to have a cinematic quality. But you need to put just as much No matter if you choose to hire a sound recordist or do your own
emphasis on the story and concept. After all, a great idea with poor location sound, make sure that you put just as much effort into the
production value will go a lot further than a poor idea with great sound as the image. After all, it’s been proven time and time again
production value. that audio influences an audience’s experience far more than
imagery.
Look at a film like Clerks by Kevin Smith. Yes, that example is going
back a couple of decades, but even for its time, the quality level of 3. Understand Your Limitations Early On
that film was extremely poor. It was black and white, grainy, poorly If you’re shooting a film with little or no money, you need to identify
lit, badly composed… but guess what? It was a success because the your creative limitations early on. Keep your head out of the clouds
writing and the story were on point. when it comes time to develop your idea and screenplay. So often
filmmakers with small budgets will want to write a script with car
2. Immaculate Location Audio
chases, explosions, exotic locations, and other extraneous elements
Nothing is more detrimental to your film than poorly recorded
and don’t realize until it’s too late that this just isn’t feasible.
amateur audio. If you’ve already made a film or two, you should
clearly understand how critical great location audio is and also Embrace limitations when making films with very little money.
understand that poor audio can completely ruin your project. Not Strategically utilize what you have around you and quickly dismiss
having a big budget is absolutely no excuse for not capturing great what is not in the realm of possibility for your film.
audio. It really just comes down to prioritizing it, rather than taking a
For example, if you have a certain location in mind for a scene, but
“we’ll fix it in post” attitude. For whatever reason, even though most
the permit to shoot there is too expensive, change the scene around

13
to take place in a different part of that same location where you can
get away with guerrilla shooting. This may seem like a compromise,
but more often than not, the scene will actually become stronger and
more unique by changing it around. Shooting limitations can force
originality and uniqueness in the scene.

In Summary
There are many great tips and suggestions could be made to no-
budget filmmakers with regards to lighting, casting, camera choices,
and so on. However, most of these elements are secondary and the
success of your micro-budget film will rely very heavily on having a
vision and maintaining your focus. Your ability to focus on a well-told
proactive story is critical – and thankfully this part of the process
doesn’t cost you a dollar.

There’s nothing wrong with wanting to shoot on a great camera or

having a preference for the visual elements of your film. But at the
end of the day, whoever is viewing your film is going to be captivated
by the story, the sound, and the execution far more than the
technical merits of your visual production. Always keep that in mind!

14
SECTION 4

Five Tips for Finding a Great Film Location

Location scouting is a lot like finding a needle in a haystack – it takes time and patience. Take advantage of the following tools and approaches to find a
great location for your next film project.

1. Go Digital Locations Hub

While having an official location scout is still necessary for big
Locations Hub is a great website for scouting because it is entirely
budget productions, you may be able to virtually scout a location.
dedicated to locations for film… not photography. This is important
Using this approach is also useful for doing a preliminary look
because a lot of locations that are great for photography aren’t that
before you go and see a location in person.
well-suited for filmmaking due to noise, traffic, etc... You’ll also find
Here are a few online location tools you can access from your detailed maps, pictures, and website links to film commissions here.
desktop: The best part? Locations Hub is completely free to use. However,
many locations on Locations Hub will charge you to shoot there, so
be sure to do your research.

15
Flickr Map Search phone to capture pictures of your location that you can share with
your producers, lighting director, sound recordist, set designer, and
On top of being a really great photo sharing website, Flickr can be a anyone else who will be a leader on set.
really useful tool for location scouting. Using Flickr’s map search,
users can see where photos were shot on a detailed map. Flickr’s There are also a lot of really good apps that can help you with
extensive user base also makes it really great if you’re looking for capturing your potential locations, like Panascout and Map-A-Pic.
something specific. Users can search their area by keywords... so if These apps allow you capture photos with cinematic cropping.
you need to find a “grungy blue wall,” you can easily search for one.
Make sure to take a director’s viewfinder with you so you can see
Shot Hotspot how your location looks at various focal lengths. This is critical. Eyes
can be deceiving. By purchasing a cheap director’s viewfinder, you
Shot Hotspot is arguably the best location scouting website for can get a better idea as to what the location will look like once you
photographers. Shot Hotspot is selective about the shooting get your camera on location.
locations they accept. Users can refine their search by landscape,
architecture, water, and a variety of other factors. Shot Hotspot also While you’re at a potential location, there are a lot of questions you
ranks locations near you based on popularity. need to ask including:

In addition to these websites, there are also a lot of location specific • Is there power?
websites with shooting locations, especially if you live in a major city.
• Is this location near any airports?
It may seem obvious, but do a simple search to see if there is a
location scouting website for your city. • Do I need a person to let me into this location?

2. Contact the Local Film Commission • Where are the breaker boxes?
If you’re shooting a big production, odds are you already contacted
• Is the neighborhood safe?
your local film office to get film permits. A film commission is also a
great place to contact when you’re looking for a potential shooting • Will there be a place for the crew to set up equipment?
location. Many film commission websites will have detailed maps and
photos of popular shooting locations in their area. More often than • What’s the parking situation like?
not, film commissions are happy to work with filmmakers coming to • Are there any events scheduled for your shoot day?
their area to shoot.
• Does this location cost money?
3. Tour In Person and Take Lots of Pictures
It almost goes without saying, but touring a location before the day of • Is there a bathroom?
the shoot is a must. While you’re location scouting, take along your

16
It’s also very important to understand what the lighting is going to
look like at the time of day you will be shooting. Your location may
look perfect at 10 in the morning, but, come 5 in the evening, you
might be dealing with shadows from trees, buildings, or electricity
poles. This is why it’s best to location scout at the time in which you
will be shooting.

4. Know Your Script

Don’t put the cart before the horse. While you may feel inclined to
go location scouting before you have a script, it’s best to wait. You
don’t want to show up on set and realize that the pivotal window
shot can’t happen because there isn’t one.

5. Take Audio Seriously

While you’re at a location, talk, clap, and listen to hear if there is
anything to be concerned about. Even if it seems like a small
problem, take it seriously. You don’t want to spend time fixing your
bad audio while on set.

17
SECTION 5

The Benefits of Storyboarding Your Next Film

Storyboarding is a commonly overlooked part of the indie filmmaking process. Here are some ways that your production can benefit from storyboarding.

While it may be true that storyboarding is not necessarily a Why You Need to be Using Storyboards
mandatory part of a filmmaker’s process, there is a reason why most The greatest incentive for storyboarding is simply the fact that
major feature films still storyboard every last shot. storyboard will help you make a much stronger film by allowing you
to visualize your movie before it’s even made. This is essentially
Storyboards not only let you and your collaborators “see” the
your chance to create a blueprint for your film that will help you
totality of your film while in production, but they also help you get
identify any potential problem areas or missed opportunities while
there in the first place by helping sell your ideas more effectively to
you still have a chance to fix them.
potential investors, producers, etc. When you consider all of the
benefits of storyboarding, it will be hard to justify ever producing Technically speaking, you can include as much or as little detail as
another film without properly storyboarding again. you want when storyboarding, as long as the ideas are accurately

18
conveyed. By the time you get to post, your editor will be thanking The Basics of Storyboarding
you, as the film will have coverage in all the right places, proper Having now gone over some of the perks of storyboarding, Let’s
transitional moments, and a slicker aesthetic. very briefly break down the basics of storyboarding your film for
those of you that have never done it.
You Don’t Need to Be an Artist or Designer
It’s a huge misconception that storyboarding requires you to have Generally speaking, for every illustration (or storyboard) you create,
the ability to draw/illustrate professionally. That’s not at all to there are five types of shots to choose from: master, long, medium,
diminish the role of the storyboard artist, as they are truly masters close-up, and extreme close-up. Sound familiar? Once you’ve
of their craft and will inevitably deliver the best results. But if you decided on which of the five shot types you want to go with for any
can’t afford a storyboard artist or need to do it yourself, that’s given shot, you’ll want to illustrate camera movement.
perfectly okay.
To depict a panning or tilting shot, where the camera either moves
As an independent filmmaker, no one really needs to see the sideways or up and down, you’ll want to create two frames to
storyboards outside of you and your team, and once again, all that indicate where the camera will start and where it will wind up. From
matters is that your story is conveyed. If you choose to storyboard there, you can use arrows moving in both directions in order to
by hand, your illustrations can be as simple as geometric shapes used portray movement.
to illustrate props/staging and stick figures for your characters. Or to
To illustrate a tracking shot, (which involves moving the entire
make things even easier, you can use any of the vast number of
camera in order to follow your continuously moving subject), you
storyboarding programs available to download on your computer,
simply draw an arrow on the frame – indicating camera placement –
tablet, or phone.
and point it in the direction the camera will be moving in.
Storyboards Strengthen Your Vision
You can also illustrate zooming, which only involves a lens and no
Your screenplay is the backbone of your film, but no matter how
camera movement at all. To show zooming in (moving closer to the
beautifully written it may be, it will never translate exactly as you
subject) and zooming out (moving away from the subject, taking in
might be picturing it to film. There’s a pretty common saying among
more of the scene in its entirety), you’ll have two frames on your
directors: if your final film looks even 70% of the way you thought it
storyboard, and depending on which direction the zoom is going in,
would, you did your job really well. Storyboards play a huge part in
you’ll either have arrows moving toward the interior frame or out
getting to that 70%, as they help you visualize your project in a way
toward the exterior frame.
that’s not otherwise possible.
These are some of the basics of creating a storyboard. As you can
The last thing you want is to get to set and realize that something
probably gather, it’s pretty easy to pick up. Just remember how
about your shoot isn’t congruent with the script. Storyboarding will
critical storyboards are to the filmmaking process. At the very least,
help you nip those issues in the bud and keep your vision alive.

19
understand some general rules/technique associated with creating
them so you can ensure they get done properly.

20
SECTION 6

Renting vs Buying: How Do You Know When to Pull

the Trigger?

With technology changing daily, the question of renting vs buying equipment is a tough one. Let’s explore these options in the context of today’s video
production industry.

We are at a point where technology is changing faster than we can the most important questions. Depending on your answers, this
take advantage of it. As soon as 4K video technology jumped onto alone may tell you which way you should go.
the scene, word of 5K, 6K, and 8K was on the tips of many tech-guru
tongues. What Type of Project Is It and How Long Will It Take?
Is this a small project where you can shoot and edit it in a day, where
So, taking into account the rapid acceleration of technology, the income potential is relatively low? Or, is this a project that could
filmmakers and video producers have to decide the best option for take weeks to produce, where the income potential is fairly
obtaining equipment: renting or buying? First lets look at some of substantial. Let’s explore this a bit…

21
For smaller projects, renting equipment is often the most Lumoid
economical choice. Sites like Lens Pro to Go and Borrowed Lenses
have streamlined the rental business through online ordering and [email protected]
offer relatively inexpensive pricing. (800) 683-5690

If you’re working on a longer project, say, a feature film or television Abel Cine
series, it may make the most sense to purchase the equipment and
then sell it upon completion of the project. Many reality television [email protected]
projects (that require tons of cameras) work this way. (888) 223-1599

Depending on the amount of usage, you may be able to sell the

Rent Glass
camera for close to what you bought it for. That number will likely be
even closer if you bought the camera used. [email protected]
(913) 732-4781
If you do buy used, be cautious! There is not a shutter actuation
count for video like there is with DSLR photo usage. Be sure to
inspect the camera for any scratches, check for dead pixels, ask How Many Projects Are You Producing in a Year?
about the repair history, and ALWAYS test shoot with it before Let’s say that you’re a filmmaker who does commercial work and you
handing over money! produce three to four projects each month over an entire year. Is
renting still your best option? If you’ll be using the same camera in
The other option would be to buy a camera and keep it, but you’ve most projects, it would obviously make sense to purchase; renting
got to factor in how many times you plan on using it to see if it’s a that Canon 5D Mark III once a month would cost you much more
worthwhile investment. than its $3,000 purchase price. There’s an old saying that goes “If
To help in finding rental options, here’s a list of rental providers. you have to borrow a tool more than once, you should probably go
ahead and buy one.”
Borrowed Lenses
The most important thing is to be realistic. For instance, if you’re on
[email protected] an elaborate campaign for a client, don’t immediately run out and
(650) 508-3370 rent or buy the equipment just for that campaign. Look ahead and
ask yourself how often you’ll use this equipment. Don’t ‘anticipate’
Lens Rentals that you’ll need the camera often until you start renting and
shooting with it consistently. Then make the leap.
[email protected]
(901) 754-9100

22
Be Responsible About Your Investment
Each option has its strengths and weaknesses. When you rent, you’ll
get the most current equipment that likely comes insured through
the rental provider. Additionally, the rental company should be able
to quickly find you a replacement camera if the equipment is
defective for some reason. With renting, you’ll have the freedom to
switch cameras. But just like any rental setup, you won’t have any
equity in the equipment.

When you buy, you don’t have to travel to pick it up or wait for it to
ship. Protect your camera and gear investment by insuring it. Don’t
assume it’s covered under your normal homeowner’s insurance. You
may require a “personal articles” policy or even a business insurance
plan; some insurance companies require this if you are making
money off your equipment.

This additional cost may pay for itself in spades if your camera takes
a bath or goes missing.

23
SECTION 7

Five Tips For Getting Great Film Locations For Free

Skimping on location can leave your film feeling amateurish and cheap. Here’s how you can get A-list locations for next to nothing!

Production value is one of the most important elements during any on locations and it really shows. It could be argued that your film’s
filmmaking process, as having a film that looks high end not only production value would benefit more from using incredible
helps connect with the viewers more effectively, but also keeps the locations than shooting on a less-capable camera. Here are some
perceived value of the project higher. This is key when it comes time tips to help you score those amazing locations while maintaining
to sell or license the film. your budget.

Filmmakers today clearly understand the importance of production Don’t Be Afraid to Ask
value, which is why the internet just about explodes every time a No matter what you’re shooting, chances are some (if not all) of the
new camera is released. Sadly, there is often little emphasis placed locations may be available to you through friends and family. You

24
need to be careful about going down this road, as you don’t want to order to get the free permit, but if you do your homework, you might
simply use locations out of convenience. After all, your best friend’s just score some amazing exteriors for free.
apartment might not look like the luxury condo that you wrote into
your script. Guerrilla Shooting
While some areas offer free permits, there will be times that you
But when there is a location that you need, and that a friend or want to shoot in a very specific location and there is no free option
family member has access to – then ask! The worst thing that will that you can sub out for it. In these situations, you might want to
happen is that they say no, and in the best case scenario you just consider shooting guerrilla style.
landed a killer location for free. And remember to never take
advantage of the situation. Giving them a credit on the film or taking In a lot of cases, scenes can be reworked to avoid overly complex
them out for dinner can go a long way. setups or heavy dialogue. If you’re in a tough situation, consider
trimming your scene down a bit and getting some high production-
Strategic Partnerships value shots by going guerrilla. Just be sure that if you cut any
In a lot of shooting scenarios, you can likely offer product placement important moments out of those scenes (in order to achieve them
or credit to a location or business that may be willing to help. For more easily without a permit), that you work them back into the
example, if you need to shoot in that previously mentioned luxury script somewhere else.
condo, you might be able to contact a real estate agent that will let
Also, proceed with caution. Shooting guerrilla can lead you to get
you shoot in one of their properties in exchange for a credit on your
your gear and footage confiscated. You can also get fined. So be
film.
careful and be ready to deal with the consequences if they arise. Go
If your film is in any way substantial, you truly will be doing them a guerrilla at your own risk! And always look out for the safety of your
favor as well, so try to think of which businesses might be willing to cast and crew.
help in exchange for easy publicity.
Shoot Out of Town
Free Permit Areas Pretty much every major city (especially LA and NYC) are very in the
For exterior locations, permits are always the biggest hurdle, as know about film productions, and as such it is much harder to shoot
many public areas can cost thousands of dollars a day to shoot in. in a metropolis. In major cities, so many of the people that you will
The good news is that there are actually loads of areas that don’t talk to about shooting (business owners, home owners, etc.) have
charge for film permits. And sometimes they’re just a stone’s throw already been through the ringer... and in some cases gotten burned.
away from your original desired location. So they are unlikely to let you do it unless you’re paying them the big
bucks.
This is something that you really need to look into, as you would
probably be surprised to learn that a lot of fantastic locations can be For these reasons, shooting out of town could be a really great
had for nothing at all. You will still need production insurance in option, especially on a project that requires loads of different

25
locations. In smaller cities and towns, people are generally far more
open to filmmakers. They see it as something exciting and fun, as
opposed to a possible threat to their property.

26
SECTION 8

8 Questions to Ask Yourself When Deciding on a Script

Have you written or received a script for your next project? Here are eight questions to ask before moving into production.

There are a tremendous amount of scripts written every year. So what does all this mean to you as a filmmaker? If you find a script
Conservative estimates began at 30,000-50,000 scripts, and that’s that you can get behind 100%, then you have found a very rare
only including those filed with the Writers Guild of America (WGAe story. Here are some questions to ask before you get your film
& WGAw). If scripts filed for copyright are included, the number can moving.
easily go up to 100,000.
1. Why Do I Want to Tell This Story?
With all those scripts floating around, it must be easy to find your It seems like an easy question, but it really isn’t. When it comes to
next project — right? Wrong. According to the latest Scoggins deciding on a project, you must be willing to give your whole life to
Report, only 90 specs were sold in 2014 seeing it through. That means you need to be emotionally involved

27
with every character. You need to know every little detail in order to “I’ll tell you a story: there was a dark point about three years into the
make this project a reality. making of the film. The pressure was mounting. We were
approaching a screening and I went for a walk the weekend before,
If you don’ think you need to know every character, just look at D.B.
going, ‘Shoot, it’s just not working. What if I just quit and move to
Weiss and David Benioff, the showrunners of Game of Thrones. The
Mexico — what would I miss the most?’ And I thought, well, my
duo actually got the green-light for the show when an HBO
friends. But then I thought, the people I really feel close to are the
executive saw Benioff working out in the gym while reading his
people that, yeah, I’ve felt happiness with, but also they are people
annotated copy of his Game of Thrones book. That’s the type of
that I’ve been pissed off at, and scared for. The subject matter I’m
dedication a project requires.
dealing with in this movie is the key to relationships. So I got
2. Why Am I the Best Person to Tell This Story? electrified, went back, talked to the guys, we rewrote the script, and
You cannot only dedicate yourself to a script, but you also have to that was a major turning point in the film.”
believe in yourself. If you don’t feel like you have the ability to see a 4. Am I Willing to Dedicate Months or Years to This
project through to its completion the way it should be done, then Project?
you’ll begin to question your own abilities. Don’t be afraid to walk Is the story so great that you are willing to dedicate yourself to the
away from a project if you don’t believe in yourself. A bad film can project for years? You don’t know what obstacles await, and your
destroy your mentality. production could be halted. Are you willing to wait to make this film?
If you do believe in yourself, don’t just rely on your skill. Really push For a great recent example, look at director George Miller. His 2015
yourself to do something you’ve never done before. This is a chance film Mad Max: Fury Road received rave reviews, and the film was
to not only hone your skills, but to create a project that you can heralded as an all-around spectacular action film. You may not know
cherish forever. You need to believe that you are the perfect person that the film was stuck in “development hell” for 20 years. Miller
for this job, and that no one could ever do it better. reacquired the rights to Mad Max in 1995. It took three more years
3. What Is My Emotional Connection to This Script? until he had his story in place.
As mentioned in the first question, you need to become emotionally He was set to start filming in 2001, and then the events of
involved with every character. You also need to become emotionally September 11th postponed the project. Then turmoil in Namibia, the
attached to the story itself. What is the true meaning of the film? location of the shoot, postponed the project further. Principal
What do you want your audience to take away after the credits start photography didn’t begin until July 2012.
rolling?
5. How Long Is the Final Product?
This was something incredibly challenging for director Pete Is this a full-length feature or a short film? That is one of the first
Docter as he was reworking his film about emotions, Inside Out. things you need to decide. If it’s still very early in your career, making

28
any film over 30 minutes in length can be an incredibly daunting task. 7. How Many Actors and Crew Members Will the Project
The length of the film will also help determine the length of Need?
production. You have to take into account the budget and time you Now that you have looked at the story itself, what about the
have to make this project. From there you can decide the length you practical necessities for bringing the story to life? How many
want to aim for. characters do you need to cast? How big of a crew do you need?
These are major factors. Not only do you need to know how many
If you can’t afford the project, can you make another version? If you
people you need, you need to know how much each of them will get
are unable to make the full-length feature, try making it a short film
paid.
first. Short films have successfully turned into features. Look at
Bottle Rocket, or 2014’s Best Motion Picture Oscar Will you be able to afford costumes (or even food) for the set? Are
Nominee, Whiplash. you still going to have enough left over for your camera, lights, and
gear? This leads us to our next point.
Director/Writer Damien Chazelle was unable to secure funding for
Whiplash. He pulled one of the most prominent scenes from the film 8. Can You Afford to Make This Film?
and turned it into a short. His goal was to submit the short film to As any filmmaker can tell you, making a film is incredibly expensive.
film festivals in hopes of securing funding for the feature. The short Every project presents even more expenses you never accounted for.
film was so powerful and well done, he not only secured funding, the This is why many projects require multiple studios collaborating to
short won Best Short Film at Sundance. The next year, the feature make a film. Trying to take on a whole project alone is nearly
was nominated for five Oscars, winning three of them. impossible.
6. When and Where Is the Film Set? Even if you can’t afford it now, you may be able to afford it later.
The setting of your film is a huge factor. Do you have the budget to We’ve presented many examples already with making short films
shoot an epic in the desert? Is the film a period piece? If so, go ahead first, or even waiting for years.
and hand over your budget to costumes. Are you able to turn this
script into a film you can actually shoot now? The best thing you can After all of this, you still face your decision to move forward with this
do as a filmmaker is embrace your limits. project or not. If you have not been swayed at all, and your mind is
still set on a project, get to it. Start making the film. Just know
The 2004 film Primer is a perfect example. Not only did the film have challenges will arise, but handling problems is the greatest skill a
a limited budget (approximately $7000), the script called for time director can have.
travel. The story and science behind it was so sound, the story
actually carried the film. With some creative thinking, nearly the
entire film was shot in a storage unit. A perfect example of
embracing you limits and working with your budget.

29
SECTION 9

The Art Department: Design, Construction, Decor, and Props

The art department is often the largest part of a film crew. Hundreds of employees make up several divisions, including Art, Sets, Construction, and
Property. Let’s take a closer look.

The art department is responsible for the visual aspects of attention to detail. Here is a breakdown of the art department and
filmmaking. This includes everything on a set, as well as the set itself. the duties of each member.
The department is supervised by the production designer.
Production Designer
Throughout filming, sets must evolve. Either they are adjusted, or The term production designer was created by William Cameron
new sets are constantly built. Many members of the art department Menzies. At the time, Menzies was working as the art director on
are on standby, in case any changes must be made. The positions are the set of Gone with the Wind. He coined the term due to the film’s
incredibly creative and require an immense amount of skill and massive scope.

30
The production designer is responsible for the entire visual multiple art directors. If so, the main position will be the Supervising
appearance of the film. To achieve the overall look, they will Art Director or Senior Art Director. On smaller projects, the job of
coordinate with the art department, costume department, makeup the production designer and art director are typically combined.
department, and more.
The art director will analyze a script to make note of all necessary
They not only work closely with the director to bring his vision to props and special set pieces that may require an extended time to
life, they also work with the producer to calculate the design, build, or acquire. They will also oversee the creation of all
needed budget. The cost will depend on the type of film, whether the necessary plans that will be given to the construction department.
art department has to achieve a modern style set, a fantasy castle, or
They are also responsible for the maintenance of sets, making sure
a sci-fi space ship.
any rebuilds or changes are made on schedule. They will manage the
Depending on the production, a production designer may even be creation, dressing, and striking of all sets and locations.
hired well before a director. They will look at scripts to estimate the
Assistant Art Director (First Assistant, Second, Third)
cost needed to bring the story to life. Once a director is in place, they
will collaborate on how to best shoot the film. They will either decide The assistant art directors are responsible for carrying out the art
to build sets, use visual effects, or shoot on location. director’s plans, including measuring locations and other necessary
Once decided, the production designer will deliver sketches and information the production designer needs. They are also
outlines to the art director, who then delivers their work to the responsible for researching and making props, assisting with model
construction department. The final sets built by the construction making, and surveying sites. On larger productions, assistant art
department will then help set decorators and prop buyers determine directors will manage the smaller locations or sets.
their needs for the film. Standby Art Director
The Art Department
This is an art director that monitors the art department during
The overall art department includes a sub-department also called filming. If there isn’t a standby art director, the responsibilities fall to
the art department. This department includes the preliminary the props master and on-set dresser.
designers who will plan the overall look of the film.
They will watch the video playback monitor to make sure all set
Art Director pieces appear as needed. They will coordinate with standby painters
and standby carpenters if any last minute changes are needed on set
The art director reports directly to the production designer. They
during filming.
oversee the artists and designers who help create the overall look of
the film. It is their job to supervise the planning and practical design
of sets and set pieces. On large-budget projects, there may be

31
Draughtsman (Set Designer) Model Maker

Draughtsmen are responsible for the technical drawings of sets. When a draughtsman requires a specific model, it is the model
Their drawings, computer models, and physical models will include maker’s job to draw and then construct the miniatures. They can use
all measurements and materials needed for construction. On many a range of materials to create the models, including clay, wood,
sets, a draughtsman in usually the first assistant art director. metal, plaster, and plastic.

Concept Artist (Illustrator) Art Department Coordinator

A concept artist works on a specific set piece. This includes With the large amount of employees in this department, the art
the design of creatures and monsters, all the way to the look of a department coordinator is responsible for monitoring daily
space ship. operations. They will work among the various departments to verify
that all sets and props are ready on time. They will also manage the
Graphic Artist
department’s budget, and schedule the set’s construction, dress, and
This position creates physical graphic elements for a set. A graphic strike.
artist will create newspapers, posters, fliers, contracts, logos, signs, The art department coordinator will also create location notes.
etc. These detail everything from details of construction, needed set
Storyboard Artist dressing, and props. They will use these notes to gain licenses and
permission for location shoots, as well as verifying health and safety
These artists will turn a screenplay into a set of detailed illustrations. protocols are met.
Storyboard artists will create storyboards, which the production
Sets
team uses to plan out every shot. These visualizations are often
created well before shooting begins. Set Decorator (Stylists)

The storyboard will show the entire film from the point of view of The set decorator is responsible for decorating a film set. This
the camera. It will show camera angles, a character’s actions and includes furniture, drapes, fixtures, paintings, and overall decor. They
position, as well as all other major elements needed for a shot. are also responsible for dressing props, which includes everything
from cars and animals to dishes and household items.
They will also list any necessary movements on screen, like a
character jumping or an object falling. Set decorators also work with product placement and acquiring
approval to use copyrighted items. Prior to a shoot, they will
photograph all items and assign them to each set. On set, they will
manage the swing gang and place everything in the appropriate

32
place. After the shoot, they will make sure the set is broken down Construction Department
and that everything is returned to the responsible rent house. The construction department is responsible for building the actual
structures that make up the set. Framing walls, doors, or
Leadsman
constructing entire buildings.
The leadsman or lead man is in charge of the set dressers. They
Construction Coordinator (Construction Manager)
direct the crew that places all the furniture, drapes, and dressing
props on set. The construction coordinator oversees the entire construction
department. They order all construction materials, schedule
Set Dresser (Swing Gang)
workers, and supervise the actual building of the sets.
Set dressers (also called the swing gang) place and remove all
Head Carpenter
dressing props. They are responsible for practically everything on
the set: furniture, rugs, drapes, lamps, decor, doorknobs, etc. The foreman of the carpenters and laborers.
Swing gang is most often used referring to the on-set dressers, those Carpenters
making any last-minute changes prior to cameras rolling. Any parts
of the set that are not permanent are referred to as the swing set. Carpenters are the expert wood workers on set. The build, install,
These are items that can be move around on set or easily removed if and remove wooden structures. The not only construct the actual
they don’t work for the overall look of the shot. physical set, they also make any wooden props and furniture.

Buyer Key Scenic

The buyer is the one responsible for purchasing or renting set This artist is responsible for surface treatments. The key scenic can
dressing. They work with stores or rent houses to schedule paint wood to give it an aged or distressed look. They also make
deliveries and purchase any necessary dressing props. props look more realistic, like painting foam to look like a rock or
brick. They can also paint a window to look like stained glass.
Greensmen
Painter
A greensman is a set dresser that is specialized in landscape and
plants – greens. This includes real and artificial plant life. A painter is responsible for the final appearance of a set. They are
responsible for all surface preparation, priming, painting, and
finishing. The can also apply special finishes, like marbling or
graining, to sets.

33
Plasterer Weapons Master (Armorer)

These artists apply plaster to walls, ceilings, and floors. They also This prop manager is in charge of all firearms, swords, or other
create molds for interior and exterior walls, or use fiberglass to weapons. They are also trained and licensed to use the weapons, and
create intricate panels – like on a spaceship. will often collaborate with the stunt manager and actor to maintain
set safety.
Sculptor

Sculptors typically create large set pieces like busts, statues, or

elaborate miniatures. They use an array of materials, such as foam,
clay, metal, and wood.

Property Department

The property department, or props, is responsible for all practical

movie props. These are not included in the set dressing or costume
department, but rather used by an actor in a scene. This includes
food, firearms, swords, or specific items like a proton pack or custom
vehicle.

Props Master

As the chief of the property department, the props master is in

charge of finding or making practical props. If the film is a period
piece, they are responsible for making sure that the props are
accurate to that era.

Prop Maker

The artist or technician that creates custom props. This can includes
creating any type of casings, or wiring electronics to make a
functioning prop.

34
SECTION 10

How to Get Hired as a Video Professional

There are many outlets for employment in the video industry, it’s simply a matter of positioning yourself so you are visible and well-represented to
employers. Here’s how to get hired as a video professional.

Sometimes, you might find yourself searching for work in a certain produce beautiful work in areas you may not be thinking about
niche that you think you belong in, but it’s important you don’t let (often with the added bonus of a more preferable work/life
preconceived notions limit your access to quality opportunities. For balance).
example, many video producers come out of school certain that they
will become professional, classically-defined filmmakers but, Networking
frankly, those jobs are limited. Regardless of your field, the single best way to get work is through
people you know. Start early and don’t ever stop!
If you haven’t already, consider other kinds of production, like
commercials, reality television, or even corporate marketing and Even if you are still in school, use that opportunity to create
training videos. There are many opportunities to be creative and connections! You are surrounded by a built-in network of people

35
who are preparing themselves to go out into the work force. They bring your business cards, and show up! For most filmmakers and
may not be a professional resource in the near term, but foster video producers, networking is unpleasant. The hardest part is
relationships with people who are smart and who are driven, or who making yourself actually show up and walk through the door, but
you find common ground with, because, down the line, those once you are there, you’ll find others that are happy to talk to you
relationships will be very valuable when you are looking for (because they’re uncomfortable, too!). In fact, a great ice breaker can
employment. be, “Man, I always feel so awkward at these, don’t you?”

Networking in school is a less formal version of the practice, but the If you’re not comfortable talking about yourself, be prepared to ask
value is that you can foster the relationship on a personal level questions of others. In fact, it’s good practice to have a few prepared
without any of the baggage of the quid pro quo nature of most questions you can ask others about themselves. It helps keep a
professional interactions. Relying on family members can be a mixed conversation going and some people really enjoy the opportunity to
bag, but often reaching out to relatives can be beneficial, too (they talk about what they do. How did they get into their profession?
should have a vested interest in your success, after all!). What kinds of projects have they worked on? If you hear something
you can relate to or you’re interested in, use that as an opportunity
If you are post-graduation, don’t give up on tapping into that
to share a little about yourself or ask follow-up questions. Just
network. Get involved in alumni organizations or reach out to the
remember, the more often you can rally yourself to attend these
career center at your school and ask them for ideas for organizations
events, the easier they get.
or clubs to join. Connect with old friends online and, if they are
working in your field, reach out to them. Go Searching
Producers want to find a talented crew that they can trust and will
The goal can’t always be to find a job directly from those in your
always be on the lookout for those people. Beyond networking, they
network. A great way to utilize those you’re connected to is to ask
use other resources to fill open positions.
them for “warm introductions” to people that may be in their
network. Look at their LinkedIn profiles to see who they are One great resource is Staff Me Up, a production-specific, nationwide
connected to and if you find anyone who you may be interested in job posting site.
meeting, ask them to write a simple email of introduction. The
recipient will be far more likely to talk to you or help you out if they Look for gigs on your state’s film commission or entertainment
know you have a mutual connection. department’s website for listings. These sites can also inform you of
work limitations in your state, like union or guild requirements.
For professional networking events, look on Facebook, LinkedIn, or
MeetUp.com for industry organizations in your area. Good keywords Your Resume
in this search are “[Your Town] Producer’s Association” or You work in a creative field and employers want to see a creative
“Filmmaker’s Group.” Find an open meeting or networking event, resume (if you are applying for a job that requires a resume).
Submitting a plain-text Word document may not necessarily hurt

36
you, but it won’t do anything to help you stand out from the rest With regard to social media, if your personal profiles are public, you
either. A quality resume is an effort multiplier — it takes some time need to be especially careful. Just be mindful of what you are putting
to do it right, but it will continue to yield you better results every out there into the great ether that is the internet. As Susan Adams
time you use it down the road. with Forbes.com put it:

Use Behance.net or other resume design sites to look at designer’s Keep private things private, while assuming nothing is truly private.
resumes to find inspiration for yours. If you’re not comfortable
It’s important to be present on social media sites like Facebook and
building something from scratch, download a resume template.
LinkedIn because it allows people to get a better sense for who you
Take time to get the wording just right. You can find lots of advice are. Use these platforms to promote your work, if possible. Share
about what content to include in your resume. Then go the extra production stills or industry related article or blogs you like.But keep
mile to double and triple-check each sentence and the visual layout. in mind that what you post can hurt you too (especially as election
Be sure to watch your spacing and alignment; we work in a visual season rolls around).
industry and those who will employ you want to know that you can
The bottom line is that, if you look for them, there are opportunities
identify visual errors. Also, spelling or grammatical errors will
to connect all around you. Whether it’s face to face or online, engage
irritate an attention-detailed producer, and may automatically
with others and be prepared to share your experience and
disqualify you from employment, depending on the temperament of
knowledge. And don’t limit yourself by what you think you should be
the employer.
doing. Sometimes it’s worth it to take a low-paying Production
If you don’t have a lot of credits to your name, make sure you have a Assistant gig if it means you can form relationships with new people
well-written summary statement that highlights your abilities, your you’d like to work with or get to know. Be mindful, be intentional,
competencies, and your goals. and don’t give up!

Your Online Reputation

The first thing many employers will want to see is your website and
portfolio, so make sure those are updated with your latest and best
work.

Almost always, if you work in production, you need a reel of your

work. Depending on the types of projects or the clients you’ve
worked with, you may not be able to use certain collateral. Ask them
if it’s okay to use samples from content they own. Sometimes you
can use clips as long as you don’t use the original audio. If you‘re not
sure, it’s best not to risk copyright infringement!

37
38
SECTION 1

Ten Essential Filmmaking Tools Under $100

Filmmaking can be an expensive career, but there are certainly deals to be had. Come in under budget with these ten filmmaking tools that are as
affordable as they are essential.

Working as a filmmaker often comes with a hefty price tag. To help 1. Canon 50mm F/1.8 II
ease the strain on your wallet, we’ve done some bargain shopping 50mm lenses are a great investment and can be had for those on a
and found some filmmaking tools that you can put in your kit budget. The Canon 50mm F/1.8 II is probably one of the most
without breaking the bank. affordable lenses out there and the image it produces is great.
Yongnuo has also released an affordable 50mm 1.8 knockoff
Note: the links in this section are examples of where you can
version.
purchase this filmmaking gear. These are not sponsored or affiliate
links. We encourage you to purchase at your favorite gear store! 2. Spider Rig
Most filmmakers like to have their camera mounted to some type of
shoulder rig or grip system. For DSLRs, you can essentially have

39
both mount styles in one Spider Rig. These rigs are really affordable They produce a nice quality flat sound, which is what you want when
and have a wide flexibility range. capturing audio or mixing.

3. Camera Cage 8. Rode VideoMic GO

Maybe you don’t need the whole rig and you just want a sturdy and So now you have headphones. Check. But how are you capturing
tough camera cage with a top handle. There are a wide variety of your recordings? We recommend Rode if you’re on a budget. While
options here. A simple search on eBay brought back a number of it doesn’t capture the kind of audio as Rode’s NTG line of shotgun
cages that are below $100. mics, it captures quality sound for the price tag.

4. Yongnuo LED Light 9. Tascam DR-05 Portable Recorder

Sometimes you need more light to really capture a great shot on the Okay, we have our headphones and we have our mic, so what are we
fly. There are many options out there to help solve low-light recording to? For that solution, we suggest looking at the Tascam
problems, but one of our favorites is the YN-300-II from Yongnuo. DR-05. This portable recorder is great for those on a budget and it’s
It’s sturdy, bright, and exceptionally affordable. fairly easy to use.

5. Hoodman Compact Collapsible Viewfinder (For Canon 10. Lowpro Photo Sport Sling 100 AW
LCD) Well, now we have all of this new gear. Where are we storing it? Take
In some situations, there can be so much light that you really can’t a look at the Lowpro Photo Sport Sling. It has dual compartments
see the LCD screen on your DSLR. For those moments, you’ll want to and plenty of space to hold all of the new equipment we’ve picked up.
grab an LCD Viewfinder. We found a Hoodman Compact Collapsible Bonus: You can also tie your Monopod to one of the bungee straps
Viewfinder to be a solid option. on the side!

6. Benro A48FD Series 4 Monopod

On documentary film shoots where the pace is quick and frantic,
using a tripod is really out of the question. Instead, I run with a Benro
Monopod, which I’ve found to be a really quality product at a great
price.

7. Sennheiser HD 280 Pro Headphones

You can never go wrong with a great pair of headphones like the
Sennheiser HD 280. These headphones were recommended to me
by several musicians, as well as a composer I frequently work with.

40
SECTION 2

How to Spot Counterfeit Camera Gear

Not sure if that equipment is legit? Does that deal feel too good to be true? Avoid getting scammed and learn to spot counterfeit camera gear with these
quick tips.

Unfortunately, not all camera gear is created equal. In fact, some 2. Where Are You Buying It From?
pieces of equipment are created simply to trick users into buying Buying from a reputable seller is everything. Look for reviews and
them. Let’s look at a few tips for helping you spot counterfeit ratings regarding your seller. If they have low ratings you can be
camera gear the next time you’re on the market for new equipment. assured that there’s something sketchy going on.
1. Look for Misspellings 3. Instruction Manuals
Misspellings, whether intentional or unintentional, are an Fake equipment almost always comes by itself in a box. So, if there’s
immediate sign that your equipment is fake. Give your equipment a a manual included in the box, it’s a good sign that the product is real.
quick look. If there’s something misspelled, it’s a fake. This also applies to equipment purchased online. Sure… someone

41
could probably fake a manual, but scammers likely won’t make the 9. Clear Printing
effort. Printed information on genuine equipment is almost always
incredibly sharp and easy-to-read. Counterfeit equipment, on the
4. Look for a Warranty
other hand, tends to be lower in quality – including written content.
Almost every piece of new equipment comes with a one year
You won’t see illegible text on official equipment.
warranty included in its box. If a warranty isn’t in the box, you can
bet your lens is a fake. It’s also important to note that boxes are easy 10. Test the Equipment
to fake. Just because your equipment is in official-looking boxes Test the gear! If you’re buying a piece of camera equipment in
doesn’t make it legit. person, you should always test the gear before you buy. If the seller
won’t let you test the camera – that should be a huge red flag. Even if
5. Serial Numbers
you’re wanting to buy your equipment online, it’s good practice to go
Most professional equipment comes with a serial number located
to your local camera store and test the camera to make sure it is a
somewhere on the exterior. If your piece of equipment doesn’t come
good fit for you.
with a serial number, then there’s a good chance it’s fake.

6. Does it Fit?
Official equipment such as lenses, adapters, and rigs will be
incredibly snug. If you hear things moving around when you lightly
shake the equipment, there’s a problem. This is especially true when
buying camera lenses or adapters. Good adapters should fit lens
mounts perfectly with no slippage.

7. “Too Good to Be True” Prices Usually Are

The online camera market is incredibly competitive, so it’s no
surprise that online stores are always trying to undercut each other
in terms of price. However, if you find a piece of equipment for half
the normal retail cost, it’s probably a fake or, even worse — an empty
box!

8. Holograms
Most of the popular camera manufacturing brands have “official”
stickers that feature holograms. These stickers are hard to replicate,
so they’re great indicators of official equipment.

42
SECTION 3

Nine Questions to Ask When Buying a New Lens

Thinking about buying a new lens? Here are nine things to consider.

As my fellow sufferers of Equipment Acquisition Syndrome know,

it’s always exciting to add a new lens to the arsenal. Before you do,
ask yourself these nine questions.

1. Do I really need a new lens?

Fact: Getting a new lens will not make you a better photographer or
videographer. If you don’t have the basics down (composition, value,
color theory, lighting, etc.) you likely aren’t getting the most out of
your current lens.

43
Until you can take good photos with the lens you have, there’s no 4. What is the T-stop?
good reason to drop $1000+ on a new one. Whereas an F-stop is a mathematical formula, a T-stop is an actual
reading of the amount of light that a lens sends to the camera. A T-
2. Does this lens fill in any focal length gaps?
stop is typically used by cinematographers more than
Can you shoot an extremely wide shot of a small room? Can you
photographers, but the information is none-the-less important.
capture a bride’s face from across a chapel? Do you have the right
lens for the job? If you’re going to invest in a new lens, make sure 5. What kind of stabilization does it have?
you’re working toward having all of your focal lengths covered. For those unfamiliar, stabilization on a lens is typically described in
terms of stops. This means a lens with 2 stops of stabilization will
Get a good standard prime and multi-purpose zoom lens to start.
allow you to shoot with a shutter speed that is twice as slow,
From there you can begin to get into more specialty lenses like fish-
allowing twice as much light to hit the sensor.
eye, hyper-telephoto, and macro lenses.
Stabilization is one of the most underrated features on a lens; a little
3. What is the F-stop?
stabilization can go a long way to make your images and video higher
in quality. Speaking of quality…

6. How is the image quality?

Specs are one thing, but the actual quality of the final images/video is
another. Before you buy a lens, you should examine the image
quality. Websites like DPReview and PhotoZone give detailed
reviews of virtually every lens on the market. Just because a lens is
fast doesn’t mean it’s necessarily sharp. Do your research!

7. Is the autofocus fast and accurate?

If you primarily shoot video, you likely won’t use autofocus very
often. However, photographers will want to invest in a lens with
An F-stop is a mathematical formula that figures out approximately great autofocus. Keep in mind, cheaper camera lenses like Tamron
how much light a lens will let to the sensor. Practically speaking, a and Sigma tend to feature slower autofocus abilities than their
lens with a lower F-stop number allows more light through the lens, “name-brand” counterparts.
capturing a more out-of-focus background.
This isn’t an issue when shooting a stationary subject, but when you
It’s a good rule of thumb to get a lower F-Stop lens if you can afford start shooting moving subjects at events like weddings, autofocus
it, but F-stop isn’t everything. You also need to consider the T-stop… becomes a very important issue.

44
8. What is the minimum focus distance?

Cheaper lenses tend to have minimum focus distances that are

extremely far, which can be aggravating if your subject is close. For
example, a 50mm lens with good macro capabilities can get better
close-up images than a 200mm lens with bad macro capabilities.
When you’re searching for your new lens, take the time to look at
the minimum focus distance.

9. Why am I buying a new lens?

A brand new lens is almost always going to work perfectly right out
of the box. However, buying a new lens is a lot like buying a new car:
As soon as you put it on your camera, it will lose 30% of it’s value.

Buying a used lens from a credible dealer might be a better option.

Many dealers offer a 30-day return policy on their lenses, and even if
you have a lens for more than 30 days, you can likely unload it on
eBay for close to what you paid for it.

45
SECTION 4

Lens vs Camera: Which is a Better Investment?

Every year, high-end digital cinema cameras get released, effectively rendering their predecessors outdated. Should you invest in new lenses instead?

It’s quite common for the first generation of any electronic product cameras on a project-to-project basis has become the way to go, and
to have technical issues, and unfortunately, it’s usually the users for others a different investment has become preferable – lenses.
that support these cameras early on that end up getting the short Here are three reasons why lenses are a far better investment
end of the stick. Not to mention that they often need to wait so long today than camera bodies.
to get their gear that, by the time it actually comes in, there’s
already a next generation camera around the corner that probably 1. They have more longevity.
has better specs at a lower price point. For these reasons and more, A great piece of glass is timeless. You could take a vintage lens from
many filmmakers, DPs, and other creative pros who are considering 40 or 50 years ago, mount it to an ARRI ALEXA, and the results will
investing in camera gear are choosing not to. For many, renting be amazing – as long as the lens was kept in good condition.
Unfortunately, the same can’t be said for cameras.

46
 Many production companies and producers own camera gear, so if
you are brought onto a production that already has a RED DRAGON
for instance, you could sweeten the deal by offering to bring your
Cooke Primes to set with you, which may very well help you land the
gig and up your rate. Not to mention these lenses can be used on
your own cameras at any point too, and will continue to work for
years to come as new camera bodies continue to come and go.

3. They rent better.

Just about everyone wants to invest in a RED or an ALEXA so that
they can rent it out, either directly or through a rental house. The
problem of course is that so many people are doing this now that
Many years ago, when film was still the standard, a DP could invest rental houses are flooded with these cameras. Many shooters that
in a film camera (like at Arriflex SR2) and use that camera for years to have invested in expensive digital cinema cameras end up finding it
come. At that time, technology didn’t move nearly as fast, and the extremely difficult to rent them out. The cameras end up collecting
camera was a much smaller part of the overall equation with regards dust on a shelf somewhere. Lenses however, will always rent better.
to image quality. Far fewer people are investing in great glass, and lenses (as we saw
in the previous point) are so adaptable that a single lens kit will be
If a new film stock came out, that stock could be used in an old
relevant to far more potential productions than a camera body
camera and that camera could potentially capture images that were
would be. In other words, a production that’s looking to shoot on
on par with a new film camera. Unfortunately with digital, that is
ALEXA isn’t going to want to rent your RED camera — but they very
obviously not the case. The good news is that lenses do still have the
well might want to rent your Schneider PL Mount lenses.
longevity that film cameras once did. If you invest in a really high
quality lens kit, those lenses are going to stay relevant for many
years to come.

2. You can use them across multiple cameras.

One of the greatest things about lenses is the fact that they are so
adaptable. A camera is just a camera. It does what it does, until it’s
either outdated or breaks down and then it’s replaced. Lenses, on
the other hand, are far more universal and can be used on any
camera that you buy, rent, own, or are asked to shoot on.

47
SECTION 5

The Five Lens Filters Every Video Shooter Should Own

Post-production and color grading can go a very long way in making your images look amazing. But in order to achieve a truly cinematic image, it’s what
goes in front of the lens that matters most.

When DaVinci Resolve Lite was released for free, just about every almost become an afterthought for many enthusiast level DPs, as
editor and shooter I knew became an amateur colorist. At around they mistakenly believe that they can replicate the look of any given
the same time, many of my colleagues had started shooting with filter in post.
RAW cameras, or cameras that could shoot to ProRes. They started
If you want to achieve the most cinematic image possible, you need
to overemphasize the post-production process to the point of
to get as much done in camera as possible. Let’s take a look at the
neglecting some traditional elements of cinematography.
use of lens filters, as they are silently becoming a forgotten trick of
The general trend over the last few years has been to ‘fix it in post’ the trade. The first two are the most critical (you may already own
and focus far more on color grading and post-processing than them), but the others are also extremely valuable.
nailing the image in camera. As such, the use of lens filters has

48
1. UV Filter ND filters can be purchased as a kit and stacked together to bring
down the overall exposure in small increments, or a variable ND
filter will get gradually darker as it is rotated. Variable NDs are the
easiest and fastest to use on set, but are often lower quality and can
cause a slight color cast on your image.

3. Polarizer
Next to an ND filter, the polarizer is arguably the most important
creative filter that every DP should have. Polarizers effectively cut
out glare, reflections, and other unpleasant sources of light without
darkening the entire image substantially. In very simple terms – they
are designed to cut out the light that you don’t want in your image,
UV filters do exactly what it sounds like - filter excess UV light from
but leave all of the light that is giving you your exposure.
hitting your lens/sensor and negatively affecting your image.
Polarizers are particularly useful when shooting through a car
Truthfully, most modern cameras don’t really require a UV filter.
window or any other piece of glass that’s causing a reflection. The
However, you might consider buying one simply as a means to
filter will help the camera see right through the glare.
protect your lens (and investment).
They also work beautifully when capturing shots of the sky and
Many professional shooters like to keep a UV Filter on their lenses at
clouds, bringing out fine detail and an overall richness that isn’t
all times to protect the surface of the lens from scratches and also to
possible without them.
take the impact if the lens is dropped. You need to be careful when
using UV Filters, as some of them can actually cause strange 4. Diffusion
reflections/flares when shooting, but it’s just good practice to keep With today’s cameras being as overly sharp as they are, there’s never
one on your lens whenever possible. Just remember to take it off been a better time to own a diffusion filter. As the name implies,
before shooting if your lens in prone to flares. diffusion filters soften your subject slightly and can often create a
2. ND Filter beautiful, very subtle glow around certain parts of of the image.
If you don’t already own an ND filter kit (or a variable ND), you need When diffusion filters are used with soft cameras, they can often
to get one. If you’re new to this – ND filters (essentially) are like create a final image that’s almost too soft and somewhat dream-like.
putting sunglasses on your lens. They allow you to control the However, when coupled with cameras like the Lumix GH4 or Canon
exposure of your image without having to adjust your shutter speed, C300, which are very sharp to begin with (almost to a fault), they
iris, or ISO setting. They are invaluable to have and a complete help to get the image looking less digital and more organic.
necessity for achieving specific depth-of-field looks in camera.

49
5. Color Filters

Color balancing filters can effectively warm up, cool down, or

otherwise add some sort of color effect to your image. Custom white
balancing and color correction can certainly replicate the look of a
color filter easily, but the end result will never be exactly the same.

These filters are especially useful if you’re shooting with a camera

that doesn’t allow for custom white balancing or recording to a
heavily compressed format, as they will allow you to capture your
look in camera and avoid having to grade the image too heavily in
post. That said, they can be fun to use and experiment with
regardless of which camera you’re using. They often create
unpredictable and unique stylistic effects.

50
SECTION 6

Ten Things to Know About Mirrorless Cameras

Thinking about getting a mirrorless camera? Here are ten things you need to know.

Mirrorless cameras have been increasing in popularity over the last 2. Mirrorless Cameras are Small and Lightweight
few years and for good reason. They offer many benefits over Because mirrorless cameras don’t have a mirrorbox mechanism,
traditional DSLRs. they tend to be smaller and lightweight. For example, the Sony a7S
is only a little over a pound – that’s half the weight of the Canon 5D
1. Mirrorless Cameras Aren’t Limited to Cropped Sensors
Mark III. While it may not make a big difference on a professional
Even though most popular mirrorless cameras are cropped, it’s
shoot, if you do a lot of street photography, a lighter camera can do
possible to have a full-frame mirrorless camera. For example, some
wonders for your shoulders.
cameras like the Lecia M9 and the Sony A7 are both full-frame and
mirrorless. Having a full frame sensor is important because it allows 3. Mirrorless Cameras Don’t Have Mirrors
you to get wide shots without having to use an expensive fish-eye Do you know what “mirrorless” means? In short, a mirrorless
lens or a Speed Booster. camera is different than a DSLR because it doesn’t use a mirrorbox

51
to send the image to the viewfinder. Instead, when looking into the lens mounts range from the high-end Leica M mount to the
viewfinder on a mirrorless camera, you are actually viewing a digital consumer level Samsung NX Mount.
representation of the image as it passes through the sensor.
8. Mirrorless Cameras Aren’t Just for Amateurs
4. Mirrorless Cameras have a Shorter Flange Focal You definitely won’t have to look long to find an amateur mirrorless
Distance than DSLRs camera, but the same could be said about DSLR cameras. You might
A flange focal distance is the distance from the end of the lens to the be surprised to hear that mirrorless cameras aren’t just entry or mid-
camera sensor. In a DSLR, the flange focal distance must be large level cameras — they can actually get pretty high-end. Luxury
enough to allow space for a mirror. In a mirrorless camera, you don’t camera manufacturers like Leica have camera lines that are entirely
have this issue. mirrorless.

5. Speed Boosters Make Mirrorless Cameras Much More 9. Mirrorless EVF Viewfinders Give You In-Line Exposure
Viable for Video Production Read-Outs
It’s no secret that most mirrorless cameras have cropped sensors. If you regularly shoot photography with a DSLR, then you know that
This is normally a problem because of the difficulty in capturing wide even with an exposure meter you can get results that are vastly
shots with a cropped sensor. Speed Boosters not only increase the different from what you expected when you clicked the shutter
incoming light of your lens, but they also make your overall image button. However, when you use a mirroless camera, you’re actually
wider. looking at a small video screen instead of an optical viewfinder. This
can be better because it gives you an accurate image readout
6. Some Mirrorless Cameras Can Shoot 4K Video
without having to take a picture and review how it looks.
Many popular mirrorless cameras, like the Panasonic GH4, allow
users to shoot in 4K. Gone are the days of mirrorless cameras being 10. Mirrorless Cameras are Silent
behind when it comes to resolution. Other mirrorless cameras, like Because mirrorless cameras don’t have a mirror box on the inside of
the Sony a7S, can output 4K via HDMI. While it’s safe to say that the the camera, they don’t have to flip a mirror up when shooting a
market isn’t quite ready to watch/broadcast videos at 4K resolution, picture. For this reason, the operation of a mirrorless camera is
having the ability to record 4K is a great way to ensure your camera quiet. This is a great feature if you shoot live events like weddings.
is future-proof and gives you more options in post.

7. Mirrorless Cameras Can Take More than Just MFT

Lenses
Although the large majority of mirrorless cameras natively have a
micro four thirds lens mount, there are a number of mirrorless
cameras that accept other types of camera mounts by default. These

52
SECTION 7

How Do Camera Shutters Work?

Let’s slow time down and take a look at how different camera shutters work.

There’s nothing like the sound of a professional camera shutter. It’s looking through a series of mirrors that get their light directly from
become so synonymous with photography that digital cameras and the lens. When you click the shutter button, that system of mirrors
phone cameras often have a fake sound effect to make the flips upwards to allow light to pass to the sensor. This is why the
photography experience more authentic. viewfinder goes black for a short amount of time when taking
photos.
But have you ever wondered about the process behind that magical
sound effect? Once the mirror is flipped upwards, a small door will move from top
to bottom exposing the sensor beneath. After that, another door
How do DSLR shutters work? will fall down, covering up the entire sensor. This process can vary in
When it comes to a DSLR camera shutter, there are three basic time depending on the length of your shutter speed. Sometimes a
mechanisms: the mirrorbox, the bottom door, and the top door. shutter speed can be so fast that your camera sensor won’t be
When you look through a DSLR view finder, you are essentially entirely exposed at any one time.

53
After the second door closes, your mirror will fall back into place. images. However, In the age of digital photography, the landscape is
The doors will then reset to their original positions underneath. This certainly different. Modern sensors are fully capable of taking
entire process from mirror up to mirror down is known as an photographs without a mechanical shutter.
actuation. A typical DSLR can withstand over 100,000 actuations in
Smaller consumer cameras like point-and-shoots and phone cameras
its lifetime.
are all examples of shutterless cameras. Shutterless cameras tend to
How do mirrorless camera shutters work? have more image noise in the image than their traditional shuttered
Unlike DSLRs, mirrorless cameras don’t use a mirror box or counterparts. This is because shutterless cameras constantly send
pentaprism to project light directly into the viewfinder. Instead, power to the sensor. When a user hits the shutter button, the sensor
when using a mirrorless camera, the sensor is perpetually exposed to is flooded with more power and the image is captured. If you’re
incoming light by default with nothing in between. This is why familiar with ISO, you know that more power equals more noise.
mirrorless cameras use either an LCD screen or an electronic
We will likely see professional shutterless cameras in the future, but
viewfinder to monitor what’s coming through the lens.
for now they’re simply too grainy/noisy for most high-end
As soon as the user hits the shutter button, a door will swing up to professional photography.
cover the sensor. Once covered up, the sensor will begin exposing.
How do shutters work when capturing video?
The door will then swing down to expose the sensor to light. After
When shooting video, the shutter process is much different. Because
that, another door will swing down to cover the sensor. The sensor
a typical still camera can only activate its shutter mechanism about
will then stop exposure and the doors will reset.
six times per second, the physical shutter doors are far too slow to
Why do cameras still have mechanical shutters? shoot video (which is typically shot in 24 or 30 fps). Instead, when
shooting video (or in the live-view mode) your shutter doors and
mirror are left open, leaving your sensor perpetually exposed.

Instead of relying on mechanical processes, the ‘shutter speed’ when

shooting video is only a reference to a timed amount of power that
goes through the sensor. This is known as an electronic shutter. After
each frame is captured, the electronic shutter resets.

What is a global shutter?

Before the existence of digital sensors, it was vital that your camera
Although the name would insinuate that it’s simply a type of shutter
have a mechanical shutter. Why? Because you can’t simply turn film
process, a global shutter is more of a camera-sensor-related feature.
on or off like a digital sensor. Pre-developed film is light sensitive,
When it comes to camera sensors, there are two main categories
meaning any exposure to outside light severely damages your
that you need to know: CMOS and CCD.

54
CMOS sensors are more common among consumer and prosumer traditional film (movie) cameras, you have to calculate your shutter
cameras, but they’re also more problematic. This is because CMOS speed yourself. Rotary disks have the shutter angle (or the size of the
sensors read pixel information from the top left of the sensor to the pizza slice - see chart), listed on their blades. DPs can then go in and
bottom right. Here’s why that’s a problem: if your subject is determine what the shutter speed is by calculating the shutter angle
incredibly fast and moves position during capture, you’ll get warped with the frame rate.
images. This is known as rolling shutter and it can produce some
pretty annoying “jello” effects, especially when shooting video.

On the other hand, CCD sensors (or global shutters) will record the
entire frame at once, very similar to a film camera. This eliminates
warping and leaves you with a more pleasing image.

What is a rotary disk shutter?

Rotary disk shutter only pertains to actual film (movie) cameras. As
you probably already know, a film camera works by exposing 24
individual film frames to light per second. The result is fluid motion
that gives the illusion of movement. As you can imagine, the If you are looking to shoot on film in the near future, there are a lot
mechanical processes already covered in this article (known as focal- of really good online resources to help you figure out your shutter
plane shutters) are far too complex and time consuming to be speed. It’s also not uncommon to see shutter speed displayed by
performed 24 times per second. Instead, a film camera uses a rotary shutter angle when shooting on high-end cinematography cameras.
disk shutter.
What in the heck is a leaf shutter?
This shutter looks very similar to a fan. In short, the rotary disk A leaf shutter is a shutter that functions inside of a lens. Instead of
rotates on the inside of the camera body, exposing the film to light acting like a door or a fan, a leaf shutter works a lot like a lens
and then covering it up again with the blade of the disk. The rotary aperture.
disk process works in 3 steps: under the cover of the disk, the
camera film moves into place, the disk allows light in, and then the You won’t find leaf shutters in everyday cameras. Typically they are
disk covers the frame. Repeat this process 24 times per second and only found in medium-format high-end photography cameras. They
you have yourself a moving picture. can function at higher flash sync speeds (up to 1/1600), making them
great for anyone who wants to shoot outdoors at a low F-stop with a
The thing that makes rotary disk shutters truly unique is the way in strobe. Because these lenses are handcrafted rather than
which the shutter speed is calculated. In modern cameras, you can manufactured on an assembly line, they tend to be incredibly
select the exact shutter speed you want for your image. But in expensive.

55
SECTION 8

Seven Tricks for Keeping Your Camera Equipment Organized

Clean up the clutter with these seven tips for staying organized on set.

In the chaos that is a film set, it can be difficult to stay organized.

When your attention is torn between directing, cinematography, or
whatever else the shoot demands, it’s hard to keep track of all your
equipment. Here are a few tips for keeping it all organized.

1. Label Makers equipment in the green-labeled bag. There are tons of ways to
Labeling your equipment is the best way to stay organized on set. utilize labels for your individual purpose. Label makers are cheap…
You can guarantee your equipment doesn’t go home with someone use them to your advantage.
accidentally by purchasing a cheap label maker. You can also color-
code the labels to correspond with respective bags. For example, if
you have a lens with a green label, your crew will know to put that

56
2. Make an Equipment List 5. Tackle Box
You should have a record of all the video/film equipment you own, if From adapters to microfiber wipes, it can be extremely difficult to
only for insurance purposes. Organize this list by equipment type keep up with all the small pieces of equipment necessary for making
(camera, lighting, audio, etc). Next, modify this master list into a a film/video. Instead of simply throwing all of your small parts into a
checklist with two checkboxes next to each piece of equipment. random zipper in your camera bag, try using a tackle box instead. I
Print off a new version of the checklist each time you head out on a recommend getting a clear tackle box that is clear and has moveable
shoot and check off each piece of equipment you’ll be taking with dividers that will better accommodate different-sized gear.
you. This checklist serves two purposes:
7. Get a Card Wallet
1. What type of shoot is it and what equipment will it require? By Losing a memory card can be one of the most heartbreaking
going through the checklist, you’ll be able to quickly ascertain what experiences for any filmmaker. Instead of going through this awful
you need and what you don’t. Add a check to the first checkbox each ordeal, purchase a memory card wallet. These storage cases will also
time a piece of equipment gets packed. By going through this list, keep your cards safe from the elements. Make it a habit on set to
you’ll minimize the chances that you’ll show up to the set without a ALWAYS add a used card to your memory card case when you pull
crucial piece of gear. out a new one. This will ensure that you only have one card out at a
time.
2. When the shoot is wrapped, go back over the list and add a check
to the second box when you verify that you have each piece of gear. 7. Labeled Lens Caps
This will minimize the chances that you’ll leave gear on set or Got a bag full of lenses? Labeled lens caps make it easy to quickly
confuse it with someone else's property. grab the right lens from your camera bag, as they are labeled with
3. Sectioned Bags focal lengths. Brands like LensBling make versions of these caps, or
you can easily create your own by labeling the caps you’ve got.
You don’t have to spend a lot of money to get a good sectioned
Labeled lens caps also make it easier when you are working with
camera bag. These bags offer greater flexibility because they can be
production assistants who might not know an 85 from a 24.
changed and manipulated to accommodate your individual needs. Be
sure to get one with velcro sides that allow you to change the layout
of the bag at will. I’m a big fan of LowePro bags for their durability.

4. Velcro Cable Organizers

Velcro cable organizers are a great way to manage your cables on
set. You’ll be able to easily identify cables by their color (very useful
on long cable runs), as well as keep them tidy during storage.

57
SECTION 9

Nine Tips for Shooting in Cold Weather

Keep your equipment safe when shooting in cold weather.

Thinking about shooting in cold weather? Check out a few of these 2. Carbon Fiber Tripod
tips. It doesn’t take a rocket scientist to figure out that a cold metal
tripod in cold weather is a bad idea. Instead of freezing your fingers
1. Avoid ‘Cold Soaking’
off, try using a carbon fiber tripod. Carbon fiber tripods are great for
“Cold Soaking” is allowing your camera to become as cold as the
shooting in extreme temperatures. They’re also extremely
environment around you… and you want to avoid this. Allowing your
lightweight when compared to their metal counterparts.
camera to reach sub-zero temperatures is a recipe for disaster, as
most cameras aren’t created to withstand subzero temperatures. 3. Bring Extra Batteries
Keep your camera in its case until it’s time to shoot. In extreme Batteries drain faster in cold weather. So next time you have to
temperature scenarios, it may be beneficial to include additional shoot in extreme cold, make sure you pack two to three times your
insulation in your camera bag. normal supply of batteries.

58
4. Use Hand Warmers cold-weather photography or filmmaking, it might be worth it to get
Small hand warmers are a lifesaver in cold weather and they can a few.
serve a variety of other purposes. For example, a small hand warmer
8. Get a Coated Lens
can be placed in your camera bag to regulate the temperature.
Most modern day lenses come with special coatings that allow them
5. Bring ND Filters to withstand the elements. This is especially important when
Snowy weather is bright even when it’s overcast. For this reason, you shooting in cold weather, as it’s easy to get things like snow and
should bring your ND filters along. ND filters cut out incoming light condensation on the lens. If you’re considering renting a lens, check
and allow you to use a wider aperture even in bright conditions. This to see if it has a specialty coating.
is really important if you are wanting to get a shallow depth of field.
9. Winter-Proof Cases
6. Gradually Go from Cold to Warm There are a few winter-proof camera cases you can buy to protect
Problems may arise if you quickly go from a cold environment to a your camera gear, including the Camera Duck which goes for about
warm one; condensation can form on your camera and lens. It’s best $130 on B&H. Camera Duck also sells large warmers designed to fit
to allow your camera to slowly adjust to room temperature. over their weather covers.

One trick is to keep your lenses in Ziplock freezer bags, allowing

them to acclimate to the temperature change before opening.
Adding silica gel packs in the baggie can help alleviate any humidity.

If condensation gets inside the camera or lens body, it can

permanently damage the hardware. In these extreme scenarios it is
best to let the camera completely dry out before attempting to use it
again.

7. Dehumidifiers
One way you can significantly cut back on condensation is to put a
dehumidifying pack in your camera bag. Just as you might imagine,
these packs are designed to absorb moisture, making your camera
less likely to experience damage as a result of condensation.

Lens cap manufacture BRNO make dehumidifying lens caps that

have silica gel built-in. If you’re going to be doing a lot of outdoor

59
SECTION 10

Buying Tips: Tripods for Video

Don’t cheap out on your camera support! Investing in a quality tripod and fluid head is a smart decision for the future expansion, performance, and
safety of your gear.

Build quality in a tripod has a huge impact on the final image for Avoid Center Columns
both filmmakers and still photographers. Tripods with height adjustable center columns introduce a lot of
vibration and instability to your camera rig. There’s a reason
Inexpensive tripods are often shoddily constructed, made from
professional quality tripods don’t have center columns: the
aluminum or a similar thin metal. This flimsy construction makes the
engineering will not provide enough stability. If you’re looking for
tripod prone to breaking and doesn’t provide strong stabilization.
adding height, go with a tripod that has longer legs.
Conversely, investing in a more expensive, higher-quality tripod will
Avoid Aluminum, Stick With Carbon Fiber
provide a more stable image, a longer product lifespan, and
additional peace of mind when you go to shoot. Are you in the Aluminum tripods are usually much more prone to vibrations than
market for a new tripod? Make the following considerations… tripods constructed of carbon fiber. Aluminum has a longer

60
dampening time, meaning vibrations are much more prevalent and
travel easier throughout the tripod.

Carbon fiber has a much shorter dampening time, containing and

minimizing vibrations with every camera movement or bump of the
tripod. Although lightweight tripods tend to cost more, they do not
necessarily perform better.

Load Capacity
Every tripod will have a maximum load capacity, ranging from 7-10
lbs for cheaper models and upwards of 50 lbs for higher-end types.
This is where a little planning can go a long way. Selecting the right
tripod for your needs (and future needs) is key to your tripod
investment.

Factor in the weight of your camera and the weight of any other
equipment that will be rigged onto your tripod. As previously stated,
account for the future when you might add more equipment to the
tripod. A teleprompter, monitors, lights, field recorders and
microphones all add weight. Never plan to be at or near your tripod’s
load capacity. If you have a 20 lb rig, a tripod rated at 30 lbs will
obviously perform better (and safer) than one loaded to capacity.

Head & Bowl Mount

Not all tripods come with a fluid head. It’s important to use a quality
head with the appropriate counterbalance and weight load. Tripods
that use bowl systems are the most widely used by professionals
because it’s easy to level and balance a fluid head in a pinch to get
that perfect shot.

61
SECTION 11

What You Need to Know When Buying a Used DSLR

In many cases, buying a used DSLR allows you to get a lot of bang for your buck – but there’s a lot to consider before deciding to drop your hard-earned
cash.

One of the greatest barriers to filmmaking is the amount of money investment. As such, here are a few key tips for purchasing used
you need to invest in yourself and in your projects. This is especially DSLRs below to help you make the right choice.
challenging for new filmmakers who don’t have a lot of money to
spend on equipment. Between lenses, camera bodies, lighting, and Buy from Non-Professionals
accessories there is only so much money to go around, and this Professionals are notorious for treating their camera gear poorly. In
doesn’t include the money you’ll need to actually fund your projects. production, a camera isn’t typically treated well as there are many
different hands on the camera and it’s being used day in and day out.
It’s not all bad news though, as these days there’s more used gear on For this reason (among many others), buying a DSLR from a
the market than ever… especially with regards to DSLR bodies. The professional shooter is likely going to mean that the camera you’re
key is knowing what to look for in order to make the right

62
buying has a lot more wear and tear on it than if you were to buy if Don’t Forget to Inspect the Sensor
from a consumer. Whenever anyone inspects a camera they want to buy, they tend to
inspect nearly everything (the body, the viewfinder, LCD screen,
I have personally bought loads of used cameras from consumers, and
etc.), but the sensor. As I stated earlier: even if the camera looks
often they’ve barely been used at all. So whenever possible, look for
amazing on the outside, there might be issues lurking beneath the
inexperienced shooters to buy gear from. They usually keep it in the
surface that you need to identify as soon as possible.
best condition possible.
The biggest and most common of these issues are scratches or
Always Check for Shutter Count
imperfections on the sensor. You need to be very careful about
A camera may look fine on the surface, but check the shutter count if
buying used gear. The seller may not be completely truthful about
you really want to know how much it’s been used. The shutter count
the condition of their DSLR, and sensor issues are relatively common
shows you the amount of actuations that the shutter has completed.
in older cameras. Be sure to shine a light at the sensor before signing
This will give you a relative idea of how long the shutter has left
off on the deal and make sure everything looks nice and clean so you
before it will need to be replaced.
can put your mind at ease. If you don’t do this, you will be kicking
Buy Last Year’s Model yourself down the road when you notice major issues with your
There’s really no sense in buying a used camera if you are purchasing footage.
the current year’s model. Most of the time, if you are buying the Always Test Shoot with the Camera First
most current model of a camera second hand, you’re not going to be
For many reasons, including those stated above, it’s extremely
getting a great deal on it — and you’ll likely not be getting a warranty.
important that you test shoot with the DSLR you want to buy before
The whole point of buying used equipment is obviously to save committing to the sale. Whether there is a sensor issue, a recording
money. If you aren’t really saving much, do yourself a favor and problem, a faulty LCD, or any number of other common problems,
cough up the extra couple hundred bucks to get a current camera you likely won’t know there’s an issue with any given DSLR until you
model that will give you the peace of mind of knowing you have a full actually shoot with it.
warranty.
I would recommend that you not only shoot with the camera, but
If you’re set on buying a used camera though, make sure to get last also look at the footage on a proper monitor to ensure that there
year’s model as that’s the only way you’re going to save any aren’t any noticeable problem areas or artifacts that may not have
substantial money. In many cases, the current model of a camera is been visible when playing it back in the camera. Always bring an SD/
not going to be that far off from its predecessor (with regards to CF card and a laptop (or card reader) with you when checking out a
specs), so don’t buy into the hype that you need the latest model to used DSLR, and don’t be shy about taking test shots.
make your work look good.

63
SECTION 12

Understanding Lenses: What is Focal Length?

Mastering focal length is the first step to understanding how a lens works.

The most important information to know when looking for a camera wide angle lenses, but most photographers just call them fisheye
lens is the focal length. Focal length tells a photographer or lenses. Due to size exaggeration, wide angle lenses are great for
videographer a lot about how the image is going to look. The shorter shooting landscapes, real estate, and architecture.
the focal length, the wider the angle of view and vice-versa. Let’s
Telephoto lenses are any lens with a focal length of 85mm or higher.
dissect (mostly) everything you could ever want to know about focal
They are usually very long in length, making them easy to identify.
length.
Telephoto lenses are generally used to shoot objects that are far
Types of Lenses away, making them ideal for capturing weddings, wildlife, and
Lenses are often broken down into three different categories: wide, events.
telephoto, and standard. A wide angle lens is any lens that is 35mm
Telephoto lenses usually have more glass elements inside than
or smaller. Lenses that are wider than 24mm can be called ultra-
wider lenses, making them generally more expensive. In fact, you’ve

64
 much-cheaper base price than their wide and telephoto
counterparts.

These lenses are the Goldilocks of lenses (not too wide, not too
telephoto), making them perfect for shooting portraits, medium
shots, and general photography.

Technically speaking, a lens is considered standard or “normal” if it is

close to the diagonal length of the camera sensor in millimeters.

Zoom vs. Primes

Lenses with focal lengths that can change are called zoom lenses and
those that remain fixed are called prime lenses. When comparing
equally priced prime and zoom lenses, prime lenses will usually
produce a better image.

This is because zoom lenses require many moving parts that hinder
probably seen an expensive telephoto lens at a sporting event. light’s ability to move through the lens. Professional photographers
Telephoto lenses can be broken down into two further subtypes: do use zoom lenses for their work (like the Canon 70-200mm), but
medium/standard telephoto (85-300mm) and super telephoto it’s more typical for high-end productions to use prime lenses, as
(300mm+). Telephoto lenses usually create a very blurry they let in more light. Lenses that come with a camera (kit lenses) are
background, making them usually zoom lenses.
ideal for isolating your
What is Focal Length?
subject.
Focal Length is not…
Without a telephoto lens,
wildlife photography would • The length of the lens.
be a challenge. • Half the length of the lens.
• The diameter of the lens.
Standard lenses are any lens
between 35mm and 85mm. Focal length is the measurement (in millimeters) from the optical
The most commonly used center of a camera lens to the camera’s sensor.The optical center is
standard lens is the 50mm prime or “nifty-fifty” as it’s affectionately also known as the focal point. For all lenses (including primes), the
referred to by many photo pros. Standard lenses usually have a focal length changes depending on what the lens is focusing on. For

65
example, a 50mm lens focusing to infinity will have a focal length of
50mm. But when focusing on an object 1 meter away, the focal
length needs to be moved 2.6mm farther away from the camera
sensor to be in focus. Thus what you thought was a 50mm image, is
actually a 52mm image.

Crop Factor
Not to be confused with a 35mm lens, most high-end cameras have a
camera sensor that is 35mm in length. A 35mm sensor is “full-frame,”
meaning it uses the entire lens when capturing an image.

This 35mm standard was designed to be identical to film cameras

which used 35mm film to capture images. So a 50mm lens on a
35mm film camera will act very similarly to a 50mm on a 35mm “full-
frame” sensor.

However, if you are using a camera that has a smaller sensor than
35mm, you are going to experience crop factor. If you’re in the
photography or video world, then you are probably well aware of
crop factor. For those who aren’t already acquainted, crop factor is a
phenomenon in which a lens will act more telephoto than it actually
is. So for example, a 100mm lens on a camera with a crop factor of
1.6x will have a similar field of view as a 160mm lens on a full-frame an image that was completely out of focus. Instead, a crop factor is
camera. actually decreasing the of angle of view. Focal length is physically
When you read online about cropped sensors, you’ll run across similar but angle of view changes.
pages and pages talking about how cropped sensors have a focal
length multiplication factor. This means that if a camera sensor has a
multiplication factor of 1.5x, then a 50mm lens will actually have a
focal length of 75mm. This is actually somewhat false. As we found
out above, the only way for an image to be in focus is for the camera
sensor to be a very specific distance away from the camera. If the
focal length actually changed from 50mm to 75mm you would have

66
 through a glass prism, or seen a Pink Floyd shirt for that matter, then
you know that bent light will separate into different colors because
color waves move at different speeds. This happens in camera lenses
too, and most photographers consider it a bad thing. It’s called
chromatic aberration.

For a digital camera, chromatic aberration occurs when blue, green,

and red light separate across three separate focal points. The result
is the skewing of colors around the edges of objects within your
picture.

Newer camera lenses have a lens element known as a ‘flint’ that’s

specifically designed to focus red, green, and blue light rays onto a
single point… but older lenses typically do not. Good quality lenses
have minimal chromatic aberration.

Chromatic aberration is worse around the edges of an image frame,

so when you’re buying a new lens, look around the edges in your
image for color shifting or “purple fringing.” However, if you are
intentionally trying to get a vintage look, try using an older lens with
an adapter. You’ll find plenty of chromatic aberration!

Conclusion
The market offers camera adapters that increase the angle of view of
Here’s the most important take away: focal length is directly related
35mm lenses to reduce crop factor. These adapters are called focal
to the angle of view. There are many more technical things to learn
length reducers (but we know they actually mean ‘angle of view
about focal length, but the topics discussed in this section are the
increasers’). Cameras with a cropped sensor can make shooting wide
most important for understanding how it plays into both
shots very difficult, so be sure to take that into consideration before
photography and videography.
purchasing a lens.

Chromatic Aberration
Remember how we talked about the focal point inside of the lens?
This point is the place in which light is directed. Unfortunately, light
doesn’t always bend perfectly. If you’ve ever shined a flashlight

67
SECTION 13

Understanding Lenses: Aperture, F-Stops, and T-Stops

What exactly does an aperture do? Let’s take a look at a few must-know lens terms.

There is no lens concept more misunderstood than f-stop. to a higher f-stop number (8,11,16,22) which doesn’t allow very
Everything about f-stops runs counterintuitive to how one would much light.
actually think they work... but have no fear. Let’s take a look at every
Although the actual f-stop numbers may seem arbitrary, they
aspect of f-stop and how it relates to photography and video.
actually stand for something important. In photography and video, a
What Is an F-Stop? stop is a step that either doubles the incoming light or cuts the
An f-stop is the numerical representation of the size of the lens incoming light in half. Knowing what numbers represent in stops is
aperture in relation to the focal length. Generally speaking, an f- very important to figuring out how much light is coming into your
stop will quickly tell you how much light your lens is letting in. A camera.
lower f-stop number (1.2, 1.4, 1.8, 2) will let in more light compared

68
Taking your f-stop from a lower number to a higher number T-Stops
decreases the amount of incoming light in half. Moving two stops Filmmakers in early hollywood answered this question by coming up
higher decreases incoming light by four, and so on. with t-stops, or transmission stops. T-stops are a measurement of
how much light is actually going through the lens at any given f-stop.
If you move from a lower number (2.8) to a higher number (4), it’s
T-stops take into account the percentage of light that comes through
called “stopping down.” If you move from a higher number (11) to a
a lens and mixes it with the f-stop number. For example, a 100mm
lower number (8), it’s called “stopping up.”
lens at f/2 with a light transmittance of 75% will have a t-stop of 2.3.
The Science of the F-Stop Similar to f-stops, the greater the t-stop number, the darker the
While most people think an f-stop is an actual reading of the amount image. Generally speaking, t-stops are used much more in the
of light that is coming through a lens, it’s actually far from it. filmmaking industry than in the photography world.

An f-stop reading is a math equation for the focal length of a lens Depth of Field
divided by the diameter of the entrance pupil (or aperture size). Besides indicating how much light is coming through a lens, an f-stop
Practically speaking, this means lenses with larger apertures (low f- indicates how blurry the “out of focus” parts of your image will be.
stop numbers) tend to be physically larger than their small aperture You might be familiar with the term “depth of field.” Simply put,
(high f-stop number) counterparts. depth of field is the amount of space that is in focus in your image.
Lower f-stop numbers (1.2, 1.4, 1.8) will have much more camera
Take the the Canon 50mm line, for example. The 1.2 is larger than blur than higher f-stop numbers (8, 11, 16).
the 1.4 and the 1.4 is larger than the 1.8. The f-stop formula also
means telephoto lenses tend to be much wider than comparable Practically speaking, this can create a problem when you need to let
standard lenses. in a lot of light while also needing to have a wide depth of field. A
quick solution would be grabbing a lens with a wider field of view
Just because a lens has a similar f-stop doesn’t mean it lets in the because they have a wider depth of field compared to a telephoto
same amount of light. For example, a 50mm f/1.4 lens from Canon lens. This is a common problem in the photography/filmmaking
will probably let in a different amount of light compared to a 50mm world and the best solution is using off-camera lights.
f/1.4 from Sigma. This is attributable to light transmission through
the lens. Due to the glass elements, it’s impossible for 100% of light Sharpness
to pass through the lens. Most lenses allow for 60-90% of the light to You would probably think that a lens is at its sharpest when the
pass through. Nicer (and more expensive) models typically allow for aperture is as wide as possible, but that’s actually not the case.
more light to pass through the lens. Modern lenses are actually at their sharpest around f/5.6-8. This is
simply due to the science of the multiple glass elements inside the
So how are you supposed to know how much light is actually going
lens. So while an image shot at f/1.2 may look super sharp due to its
through your lens?
depth of field, it may actually be much sharper at f/5.6.

69
Clicked vs. De-clicked Lenses
For most modern lenses, an aperture is adjusted by a motor that
communicates to the camera. So if you wanted to adjust your f-stop,
you would use a wheel on the camera instead of adjusting anything
on the lens.

However, if you have an old lens or a lens that is designed for

filmmaking, then you probably have an actual ring on the lens that
allows you to adjust the aperture blades. The lens will make a
clicking sound when it goes from one predetermined f-stop number
to the next. These are often referred to as “clicked” lenses. Needless
to say, lenses that click between f-stops are bad for filmmaking. They
will jump harshly from one f-stop to another during adjustment,
which is jarring to the viewer.

To avoid this problem, lens manufacturers sell “de-clicked” lenses

that can move smoothly between f-stops. If you ever need to move
from one lighting situation to another (like indoors to outdoors), a
de-clicked lens will allow you to smoothly adjust the aperture
without the audience noticing. If you need a lens to be de-clicked,
you can pay to have it done professionally. If you’re really tech savvy,
you can even do it yourself… but be careful. You can destroy your
lens if you’re not careful.

If you’re a photographer or filmmaker, understanding f-stops is

crucial to mastering your craft. Although they may seem
counterintuitive at first, over time you will be able to recall how f-
stops relate to light and depth of field without even thinking about it.

70
SECTION 14

Understanding Lenses: Image Stabilization

Image stabilization is an easy concept to grasp, but the implications of having a more stable image go far beyond sharp photos.

At its core, image stabilization (abbreviated ‘IS’) does exactly what Lens Stabilization
you’d imagine: it compensates for the movement of your camera or Lens stabilization occurs deep within your camera lens, using a
lens to produce a more sharp image. system of electromagnets to move internal glass elements. When
image stabilization is engaged, your camera will activate these
There are two very different types of image stabilization offered in
electromagnets and create a “spring-like” suspension system where
modern cameras: lens stabilization and sensor stabilization. While
the glass can absorb camera shake, thus making your still images
sensor stabilization may be a little easier to understand, the
more sharp and your video more smooth.
majority of this chapter will cover lens stabilization, as it is most
common in professional camera equipment. While the stabilization concept is exactly the same across every lens
brand, different names for optical stabilization include:

71
 • Canon – Image Stabilization (IS) However, most lens stabilizers allow users to have the “sharpness
• Nikon – Vibration Reduction (VR) equivalent” of a shutter speed three to four times slower. For
• Sigma — Optical Stabilization (OS) example, a lens with a 4-stop stabilizer shot at 1/8 shutter speed
• Tamron – Vibration Compensation (VC) should have the same sharpness as in image shot at 1/125 without
• Leica – MegaOIS image stabilization — but with 16x more light!
• Pentax – Shake Reduction (SR) However, not all lenses allow for three to four stops of stabilization.
While the names may be different, they all stand for the exact same Before you buy your lens, check how many stops the stabilizer
lens stabilization method. guarantees. It makes a huge difference.

Sensor Stabilization Having the ability to shoot at slower shutter speeds is really
In sensor stabilization, the sensor moves to compensate for shake, important for any photographer. If you were to switch from a lens
not the lens. without image stabilization to a lens with 4-stop image stabilization,
it would be like going from an f/5.6 lens to an f/1.4!
In contrast to lens-based stabilization, sensor stabilization doesn’t
Problems With Stabilizers
rely on moving parts inside the lens. Instead, as the name implies, the
physical camera sensor moves to compensate for the shift in No matter how steady your hands are, there will always be a little
movement. Because sensor stabilizers require more room to shift camera shake if you’re holding the camera with your hands, making
the output image, the lens output (the light projected on the sensor) image stabilizers very useful. But if you were to take your camera,
must be much larger than the sensor itself. That means this type of place it on a tripod or table and leave the image stabilizer on, the
stabilization is virtually impossible with full-frame sensors. Olympus stabilizer will still try to stabilize the image even if there is no camera
and Sony cameras often use sensor stabilization in their cameras. shake. It may result in the lens perpetually stabilizing itself in an
The biggest downside to using sensor-based stabilization is that endless “feedback loop” which can break the stabilization features in
stabilization needs to be adjusted for different lenses. your lens. So be sure you turn off IS if your camera is on a tripod.
Why Is it Important? Newer stabilized lenses will automatically shut IS off if they detect
the camera is on a tripod.
Image stabilizers are important because they make your image
Stay Alert! Anti-Shake vs Image Stabilization
sharper, even at slower shutter speeds. As you may know, an image
shot at 1/125 of a second will be sharper than an image shot at 1/8 Some lower-end camera manufacturers will try to fool their
of a second. An image shot at 1/125 of a second will be four stops customers into thinking the camera has built-in image stabilization
darker than an image shot at 1/8. by saying it has “anti-shake” technology or an “anti-blur” mode. In
reality these “features” do nothing more than reduce the shutter

72
speed or increase the ISO. While this isn’t a feature in professional
cameras, it’s more common in lower-end cameras. Always check the
detailed feature specs before making a purchase!

Mode 1 & Mode 2

While older lenses with stabilizers usually stabilize for panning (left/
right) and tilting (up/down), newer lenses are increasingly giving
photographers the option to turn off panning stabilization with
“mode 2.” In mode 2, the lens will still feature vertical stabilization,
but will allow for motion blurring to occur during a pan. This is
important for photographers who like to shoot pictures of moving
objects with a blurred background to insinuate speed.

Is Image Stabilization Worth It?

Having the ability to shoot at a lower shutter speed is extremely

important for you as a photographer, but with more stops comes an
increased price. In fact, a lens with image stabilization is likely to be
almost double the cost of a lens without it. In the end, it all comes
down to what you’re looking for.

If you’re looking for the most light possible, then image stabilization
will definitely get you a bigger bang for you buck. However, if you
want a lens that gets you more bokeh or a blurrier background, then
you might want to purchase a lens with a larger aperture instead.

Conclusion
Image stabilization is arguably more important than a low f-stop
number. Before you purchase your next lens, check how many stops
of stabilization the lens will offer.

73
SECTION 15

The Camera Gear You Need for Shooting Wedding Videos

Shooting a great wedding video requires as much gear as shooting a small film. Here are some considerations for everything from camera stabilization to
screwdrivers.

When shooting a wedding video, you may be overwhelmed by the wedding video, you should at least have two cameras. Three is the
amount of gear you actually need. Here are some of the best items best option, which gives you two to shoot with and a backup cam.
for shooting the big day. These camera gear options are not only
compact, they’re ready to be used in the fast-paced wedding Stabilization
environment. If the couple wanted shaky camcorder footage, they would have just
asked that random family member who has a camcorder. Since they
Camera (and Lenses) hired you, you’ll need to make sure your footage is as steady as can
Obviously the most important thing you need to shoot a wedding is be. Here are some considerations for camera stabilization.
a camera and some lenses. As far as cameras and lenses are
concerned, just have a backup camera ready. While shooting

74
Tripod over your shoulder and does not require battery or computer
The tripod is the golden standard of all stable footage. Users think assistance to operate. Obviously they are handheld.
they need that latest and greatest stabilizer toy to get the best
Handheld stabilizers are best used during the reception. They
footage, but that couldn’t be further from the truth. A solid tripod
capture fantastic dancing footage. You can work your way in and
and fluid head will do more for your video than any of the following
around the dance floor. The handheld stabilizers are also good to use
suggestions.
during portraits, as you can follow the couple and photographer as
The added benefit is the ability to set up a tripod and let a camera they take pictures.
run while you attend to other shots. It also makes a great assistant
Also, here’s a pro tip: do not follow the bride down the isle! There is
during the ceremony. You can set a tripod in the back of the venue
nothing worse than a videographer or photographer getting in the
and just let the camera roll while you work on another camera
way of the ceremony. This is not your moment! Stay out of the way!
angles.
You are supposed to capture the wedding, not be part of it.
Monopod
Note that this category did not include 3-axis gimbals. While great
Now that you have a camera on a tripod recording the ceremony on for filmmaking and indie productions, 3-axis gimbals are not the best
its own, you will need something to hold the other camera you for wedding video. You cannot discretely move around a dance floor
should be shooting with. One of the best (and often cheaper) options with a MoVI or Ronin.
is a monopod.
Slider
Monopods are great for a multitude of reasons. They are compact,
A camera slider performs magically when it comes to b-roll. You can
lightweight, and very versatile. Many carbon-fiber monopods can
easily attach it to a tripod and run around the venue capturing
hold an incredible amount of weight. With the ability to quickly
everything from exteriors to table centerpieces. Adding the slightest
adjust the height, you can go from a low-angle shot to a high-angle
amount of movement can make footage much more intriguing.
shot in seconds.
You can slide along the entryway table, capturing the signature book
They are also great for maneuvering through crowds. In very limited
and photos. You can slide into an entryway to help transition from
space, you can still shoot incredible footage and then get out of the
one location to another. You can even use a slider to capture a jib
way in an instant.
shot.
Handheld Stabilizer
Audio
These tools are the Steadicam, Glidecam, Grip Handles, Merlin, etc.
How you capture audio is going to depend on the type of camera you
This category includes pretty much any stabilizer that does not go
are using. As DSLRs are the most common cameras used to shoot
wedding video, you will need multiple audio sources. If you are using

75
a traditional video camera, you may have built-in microphones or the On-Board Camera Microphone
ability to plug in a mic via XLR.
If your camera has a microphone built in, be sure you have it
Recorder recording. Even if you aren’t planning on using it, it’s good to have a
backup. Also, it will help you sync the footage when you are editing.
You are going to need a versatile audio recorder. You want
something that has built-in microphones, accepts external If you are using a DSLR, you will need to attach a microphone to get
microphones, and allows you to plug into a soundboard. passable audio. It should be noted that adding a mic to a DSLR still
isn’t going to be the best option. The cameras were not designed to
If you are working with a great DJ, then you can easily plug into the
capture optimal sound. Just use it as a backup.
DJ soundboard (if they let you). Be wary of this, as no two DJs are
alike. You could end up getting a terrible mix that you can’t use. Be Audio Cables
sure you have plenty of backups in place as well, like an audio feed to
your camera or an additional recorder. Make sure you have plenty of cables handy. You will at least
want XLR, 1/4 inch to 3.5mm, and RCA audio cables at the ready. You
will need these to plug into the DJ soundboard, any venue speakers,
Wireless Lav Microphones and into the audio recorder.

To capture quality audio while being as discrete as possible, you will Lighting
need a wireless lavalier microphone. The best option is to attach a You won’t be setting up any three-point lighting during the ceremony
lav to the officiant and a second lav on the groom. They can easily or reception. However, you will want something you can use in a
put the transmitter in their pockets. pinch. The best option is to use an LED light that you can use on
camera, handheld, or on a stand.
If you only have one lav, the officiant is often the safer bet. They are
the ones talking during the whole ceremony. Be sure to tell the A small LED light is portable and easy to toss in your bag. Odds are
officiant they need to be close to the couple so you can pick up the you won’t really need it until the reception. The DJ’s light setup may
vows. provide a great look. If not, just have a light ready for any low-light
situations.
Don’t even try to attach one to the bride. It should go without saying,
but there is no way they spent all that money on their beautiful Miscellaneous Support Gear
white dress for you to attach an ugly black transmitter to the back of Alongside all of this large camera gear, here are some of the smaller
it. things to take into consideration. This camera support gear will make
everything go much smoother.

76
Quick Release System Tools

Don’t waste time attaching your camera to different systems. Make Here are some essential tools to have in your bag: gaff tape,
sure you decide on a single quick release system, that way you can extension cord, surge protector, allen wrench, screwdriver, multi-
leave a quick release plate on your camera and just quickly snap into purpose tool. All of these will come in handy at some point. Make
place. sure you have the right sizes and types of tools for your gear. It’ll be
hard to tighten a flathead screw with a phillips screwdriver.
Memory Cards & Case

You will need a ton of memory cards. As mentioned before, shooting

a wedding video is just like shooting a small-budget film. Avoid trying
to shoot everything on a large card. Having multiple cards may be
seem tedious, but if something goes wrong it’s easier to lose 16GB of
footage rather than 64GB.

You will also want to keep track of which cards you have already
used. You can lock SD cards, but you may forget to do so. One of the
easiest things to do is putting all your cards in a case in the same
direction before the shoot. Then as you use a card, simply put it back
in the case upside down or backward.

Filters

Many weddings are going to be shot outdoors. Be sure to have filters

for each of your lenses.

Batteries (All Kinds)

Have plenty of batteries for all of your various needs. Be sure to

have camera batteries, AA, and 9V batteries for your audio recorder
or microphones, as well as batteries for your lights. If you don’t have
enough batteries, be sure to set up a charging station so the
batteries will be good to go when you need them.

77
78
SECTION 1

Three Hacks for Shooting Without a Focus Puller

Cinematographers on low-budget indie films are often required to operate their camera while also pulling focus. Here are some hacks to make this
situation less frustrating.

The role of a focus puller is critical on nearly any professional set. deliver the desired creative results. In my opinion, the frustration
The skills required to accurately pull focus in challenging situations usually stems from attempting to act as both DP and 1st AC, as
are independent of the skill set required by the cinematographer, opposed to setting up the shots in a way that allow for a single
though there is some crossover. operator/focus puller.

Even if a DP also happens to be fantastic at pulling focus, they are Here are three hacks for working without a dedicated 1st AC.
often busy with the camera and keeping an eye on lighting. In these
instances, a dedicated 1st AC can make a world of difference on set. 1. Attach a String to Your Talent to Maintain Your Distance
When Tracking
All that said, there are many situations where DPs need to fly solo Tracking shots are one of the most common shooting challenges
these days, which can lead to frustration when they are unable to when there’s no focus puller on the crew. When following an actor, it

79
can be extremely difficult to keep your shot in focus, as the talent 3. Avoid Unnecessary Pulls
will always be walking at a slightly different speed than you. When you’re used to working with a focus puller, you might tend to
take them for granted and simply assume that every shot needs a
As you can imagine, this is a nightmare when it comes to pulling
focus pull. In reality though, there are loads of scenes that don’t
focus. Unless you’re shooting with a very high f-stop (leaving nearly
require focus pulls at all.
the entire image in focus), your talent will drift in and out of the
focus plane every few steps. If you can get away with shooting a wide shot at infinity (and it still
works for your story), then go for it. Or if you want to use selective
Attempting to pull focus yourself when shooting like this is usually a
focus to isolate a character in a scene, intentionally avoiding pulling
terrible idea, since by the time you move your focus to compensate
focus to their scene partner, that could be a great technique too – as
for the talent’s movement, you’ve already lost them again.
long as it serves the story well.
2. Always Use Peaking and Never Use Markers
Using marks on a follow focus is one of the fundamentals of pulling
focus for a 1st AC. But when you’re pulling focus yourself, you need
to learn to throw that out the window entirely.

Even if your shot is locked off on a tripod and you’re simply pulling
focus between two characters on alternating lines, you still shouldn’t
be diverting your vision to the follow focus for too long, as it will
inevitably take you away from the monitor.

If one of the actors moves in a way that is slightly different from the
blocking, you may very well miss it if you aren’t 100% visually
focused on the monitor at all times.

For this reason, I always recommend using focus peaking whenever

possible. Peaking is often used by 1st ACs to lock in their focus
marks. It’s sometimes then turned off so the DP can see the image
without the strange effects of the peaking on the monitor.

When shooting by yourself though, it’s critical that you learn to

constantly shoot with focus peaking on. Rely on it solely, as it’s truly
the only way you can achieve critical focus without taking your eyes
off of the monitor.

80
SECTION 2

How to Create a Low-Budget Film That Feels Like a Blockbuster

Trying to get a movie made with minimal financial backing can be frustrating, as tough decisions need to be made early. Check out these tips for creating
a killer low-budget film.

Sure, you can get your crew to volunteer or call in favors to get your your budget down as they pertain to various departments on a
locations for free, but there are also risks associated with cutting typical small-scale film.
corners that can directly result in your film suffering on a creative
level. So how do you create the very best film with a minuscule Casting a Low Budget Film
budget? Skimping out on casting is the number one issue that most micro-
budget films suffer from. When dealing with a low budget, it’s
There are places where you can afford to cut corners... and there are tempting to call up your actor friends and ask them to give you a
places where you absolutely can’t. There may not be an exact freebie, but this is generally a bad idea.
formula for this, and of course every production has its own set of
requirements and needs, but here are some thoughts on keeping Unless your friend is exceptionally talented and you’ve written a
role with that person in mind, you will end up casting the wrong

81
person for the role. And ultimately that will be a very bad starting it down to the bare essentials, these film crew members should be
point for your film. That’s not to say that your friend isn’t a good able to cover your basic needs.
actor, but simply that they may not be the right person for the
It’s also a good idea to pay every last one of your crew members.
project. Don’t simply cast them because they are free. Cast them
Don’t be too tight with the budget in this department. You’re better
because they are good and they deserve the role.
off having fewer crew members that are paid than more crew
This however, doesn’t mean that you need to spend an arm and a leg members that are volunteering. Your crew is the lifeblood of your
on your cast. Set up a real casting session (at an affordable location) project. Unlike actors, who at least get the visual recognition of
and bring out actors that are willing to work on deferred payment or being in the film, your crew is literally hidden behind the scenes and
for their portfolios. You can absolutely get talented actors on board often don’t get the recognition they deserve.
with your film who are willing to donate their time, if you in turn
With that said, if your budget doesn’t allow you to cover their normal
provide them with something of value – the script.
rates, then defer their payments and offer a smaller day rate to cover
If you’re going to get actors to come out for free, ensure it’s worth their expenses. You want your crew to be happy. If you don’t show
their while. Give them the opportunity to play an amazing role and some good faith, then they will lose interest in your film and that will
treat them well throughout the process. You want to find people that affect it negatively in many ways.
are as much a part of the film as you are.
Locations
Crewing a Low-Budget Film When producing a low-budget film, you can and should get most of
There are certain crew positions that are essential to even the your locations for free — but that doesn’t mean they should look like
smallest of productions and others that (while equally important) you got them for free. In the same way that you should try to avoid
may be able to be covered by other crew members. In general, the casting your friends as actors, avoid asking your friends or relatives
crew members you should have on every shoot are: for locations – unless they are exceptional.

• Cinematographer If your character is supposed to be a starving artist, but you shoot in

• Location Audio your friend’s brand new condo, well, that’s not going to be very
• Grip convincing. And since you don’t have an art department, you can’t
• Makeup even set decorate it to look the way you want it to.
• Production Assistant Unfortunately, a small budget means you don’t have the option of
Are there other extremely crucial members that aren’t on this list? writing anything and everything that you’d like into your script. This
Of course. Ideally your DP will want an AC, and your Grip will want a truth especially translates to locations. In other words, just having a
Gaffer to work with. But the truth is that when you are forced to boil house doesn’t make the house the right house for your movie. Of
course, you have other options.

82
The easiest solution would be to rework the scene so it takes place Camera
anywhere else you may have access to. A coffee shop or park, for A lot of micro-budget films blow way too much money in the camera
instance. Kevin Smith’s Clerks is a perfect example of utilizing the department. Many filmmakers (especially those without a camera
locations that you have. He worked at a convenience store and background) overestimate the importance of the camera and
wrote the story around that store as that’s what he had access to. underestimate the importance of the DP and lighting. As a result,
That’s exactly what you should do, too. they will often spend a massive part of their budget on renting a
camera and leave next to nothing for the rest of the project. They’re
For outdoor locations, you also have the option of shooting guerrilla
shooting 5K resolution, but still capturing poor actors and ugly
style, without permits or permission. Films of all sizes have done this
locations.
successfully and there’s no reason you can’t do it too. However, if
you want to do go down this path, you need to take into account the If you or your DP own a 5D, GH3, Pocket Camera, or any other good
risks involved and be willing to take responsibility for the DSLR/video camera, consider using it. A good DP will be able to
consequences. In some cities you may get fined and even have your make your DSLR footage look gorgeous.
equipment confiscated. If you decide to do this, proceed with
caution. Another option is to buy a used camera and sell it at the end of your
production. In this case, you still may be looking at a DSLR, which are
Food extremely affordable.
You need to ensure that your cast and crew are fed well and fed on
time, as that’s really the least you can do for them given the Production Design
sacrifices they are likely making to be a part of your film. With that Although you may not have the budget to pay for a dedicated
said, there are still ways to save money in this department. Production Designer, you still need to pay a lot of attention to the
production design department. With good production design,
The first rule here is that you need to plan. If you don’t know what average cinematography can look Oscar-worthy. Obviously with bad
you’re getting for lunch, you’ll wind up ordering individual meals for production design, the opposite is true.
your cast and crew every day and you will very quickly be over
budget. Instead, consider making some food yourself and bringing it How you pay attention to this category is up to you. You may want to
to set, as long as it’s still good quality. Pizza or subs are okay for a day take the extra time yourself to source props/materials to make your
here or there, but don’t do it for every meal. locations work for you, or you may have someone else on the crew
who can take your direction and step in.
In general, with a healthy mix of making your own food and ordering
affordable bulk meals that have been planned, you can save a ton of While you or your crew may not be experienced in production
money in this area. design, the fact that you are paying attention to it and making an
effort at all will go a long way. If you can afford a dedicated

83
Production Designer, then by all means bring one on board. If you quality of your final product. When you cut the budget, prevent a
can’t, that doesn’t mean you shouldn’t do anything at all. negative ripple effect on your film by making up for it in other ways.
Usually this comes in the form of putting in more time.
The other thing to consider is if you really have no time or resources
to do the Production Design yourself (or hire a Production One last suggestion: let your micro-budget set feel like a larger set. A
Designer), then choose locations that work well without it. Spend big issue that plagues many films of this scale is that the cast and
some extra time looking for the perfect locations that are already set crew lose interest after a few days. They stop believing in the project
up exactly the way you picture them in your head. When you find due to the size and nature of the production.
those locations, your need for additional help in this area isn’t as
If you make an effort to treat your set the way you would if you had
strong.
ten times the budget, then everyone else will too.
Sound
Whatever you do, do not cut any corners when recording location
audio. Instead of looking for ways to save money in this area, look for
ways to pay your sound recordist well.

50% of your film is the audio. If you have poor audio, your film’s
production value will be lowered immensely. In fact, many would
argue that good audio is more important than good visuals to the
average viewer.

You may have a Zoom recorder and a decent shotgun mic, but that
doesn’t mean you should try to record audio yourself. Even if you’re
skilled at recording sound, you’re supposed to be directing the film.
It’s not your job to record audio at the same time. If you try to do
this, you’re only taking time away from directing the actors and
paying attention to the rest of the production. Do not skimp on
sound!

Final Thoughts
With only so much money to go around on a micro-budget film, you
have to be really careful about where it goes. Think of your budget as
a balancing act between money and quality. Don’t assume that you
can simply save money in one department without diminishing the

84
SECTION 3

Producing Documentaries With High Production Values

It’s more crucial than ever to maintain high production values when producing documentaries. Here are a few ways to go about it.

Until recently, documentaries weren’t necessarily known for their same equipment as high-end narrative filmmakers. For instance, it’s
production value. Some of the best feature-length documentaries in not uncommon today for a documentary to be shot on a RED
years past had loads of technical issues, yet they still succeeded DRAGON or an ARRI AMIRA. Granted, not every documentary is
based on their content alone. It’s harder than ever for a shooting on RED or ALEXA, but even those shooting on high-quality
documentary to get seen and sold without a strong aesthetic and DSLRs can certainly still hold up really well on a big screen.
great audio.
The fact of the matter is that you don’t need a high-end cinema
While there are exceptions to this, there’s no denying that the camera to shoot a film with high production value – although it
overall quality of the average documentary has increased certainly can’t hurt. There are countless ways to keep your
dramatically over the last decade. This is likely thanks to the digital production value high, even when working with limited gear. Here
revolution opening up the door for documentarians to shoot on the

85
are five of the most important elements to consider in order to subject. This will give you two separate audio channels to choose
achieve this. from in post and will ultimately help keep your audience much
happier with the final product.
Shoot Beautiful Interviews
Depending on the type of documentary you’re shooting, one of the Great Music Is Key
only opportunities you may have to shoot in a controlled We all know that great documentaries are made in the editing room,
environment will be your interviews. Every documentary is different but one point that is often overlooked is the importance of music.
of course, but it’s quite common for the average doc to consist
Documentary filmmakers often miss opportunities to include music
largely of talking head interviews intercut with some “day in the life
cues that can really guide their story and help drive the point home.
footage” (or b-roll).
Understandably, you may not want to go overboard on the music so
Naturally, the “day in the life” footage will need to be shot in a more as not to bias your film, but there is a time and a place for music in
run-and-gun style than your interviews, and no matter how great almost any doc. You shouldn’t be afraid to make use of some strong
you are at shooting – it’s going to have some technical problems. musical cues.

The good news is that you can easily make up for this (and offset it And remember, it’s not just where you use the music, but the quality
visually) by capturing beautifully lit interviews that are easy on the of the music itself.
eyes. Once again, remember that you only have so many
opportunities to control the look of your film when shooting a doc – Reenactments Can Work for You
so take advantage of every one. At some point, the idea of shooting reenactments for a documentary
became a faux pas, possibly due to the abundance of low-quality
Prioritize Location Audio docudramas that were being produced in the 90s. Thankfully,
It’s perfectly fine if a few of your scenes need to be subtitled as a dramatic reenactments are being used much more tastefully and
result of not picking up proper location audio, but you should be artfully these days... and they can really up your production value.
aiming for the best sound quality possible. You can subtitle a scene
Much like shooting beautiful interviews, reenactments give you
and get away with it, but that doesn’t mean you should. The last thing
another opportunity to have control over what you’re shooting and
you want is a 90 minute doc that’s subtitled from end to end. Unless
add some high production value to your film that simply wouldn’t
it’s a foreign language film, the overall production value of your piece
exist any other way.
will suffer.

Even if you are shooting as a one man band, you should still be able
to capture great audio. All it takes is a little attention to detail.
Whenever possible, use a shotgun mic (either on a pole or mounted
to the camera) in addition to a wireless lav mic that’s clipped on your

86
Crew Up

There are some cases where you may need to shoot scenes for your
documentary as a one man band. You may need to shoot
inconspicuously with no permit or document a person that doesn’t
want a whole crew following them around all day. In all other cases –
get a crew!

You don’t need a big crew. But if you can have at least a camera op
and location audio on set, you’ll be in very good shape. Having the
freedom to oversee your production and not get bogged down with
operating a camera can be very creatively freeing. In the end, it will
allow you to capture better footage by being focused on the big
picture.

87
SECTION 4

Go Undercover With These Five Guerrilla Filmmaking Tactics

Guerrilla filmmaking can be risky, but sometimes there’s no choice. Here are some important planning tips that can help prevent disaster.

When faced with the dilemma – to shoot without permits or not and having your gear confiscated. Thankfully there are some
shoot at all – a lot of filmmakers will opt to shoot their film workarounds that can help you tackle a guerrilla or low-budget
“guerrilla” style. In other words, they’ll choose to go ahead and film shoot if you want to do it right. These tips are equally as applicable
without location permits or permission from property owners in to journalists who may be working in restrictive conditions.
order to keep more money in the bank. While this may seem like a
Quick Note: When shooting guerrilla style there is always a risk that
fairly easy decision (especially when faced with having to shell out
you will be shut down or fined. If you choose to go down this path,
potentially thousands of dollars for permits), there are some severe
you are doing so at your own risk. Always be aware of the potential
downsides to consider when going down this path.
consequences. Be sure to check local laws and, most importantly,
If you’re caught at the wrong place at the wrong time, you run the always keep your crew’s safety in mind.
risk of having your production shut down, receiving additional fines,

88
1. Don't Get Tempted by Cinema Cameras – Use a DSLR The number one rule when shooting guerrilla should be to keep the
crew (no matter the size) out of sight unless completely necessary.

As mentioned above, film shoots tend to draw crowds. You need to

be concerned about attracting members of the general public who
can very quickly cause a scene around your guerrilla set.

It’s a huge mistake to have more bodies present on a guerrilla shoot

than necessary. Unfortunately, it’s a mistake that many filmmakers
make. The only person that needs to be present during shooting
(outside of the DP and actors) is the director.
The DSLR revolution may be slowing, but there’s still no better
Always make sure your crew is situated in a low-key area when
option for shooting guerrilla style than a DSLR.
you’re actually shooting.
The smaller the camera you’re using, the less likely it is that you’ll get
caught, but there are other considerations as well. For instance, 3. When It Comes to Audio, Always Go Wireless
cameras like the Blackmagic Pocket Camera may be smaller than If you have a half-decent location sound recordist on your team, they
most DSLRs, but that doesn’t necessarily mean that they are going to will be begging you to use a boom whenever possible. Unfortunately,
be the right choice. boom mics are the biggest giveaway of a guerrilla film shoot, so
you’re going to need to learn to work without one.
The Pocket Cam (and other similar cameras) are unique looking and
often draw attention from onlookers. They also often require more Your sound recordist may not be happy with you for requesting
rigging than DSLRs, which ultimately brings up the actual size of the lavalier microphones only, but you are far more likely to get the shot
camera. While working with a small camera is one key to successfully you need when you avoid attracting unwanted attention.
accomplishing a guerrilla shoot, it’s not the only consideration. Once you have your lavs up and running, the key is to figure out how
DSLRs may not be in their heyday right now, but in capable hands to hide the wireless receivers and recorder. It’s usually best to have
they can produce gorgeous images. your sound recordist standing by with the gear in his or her
2. Keep Your Crew out of Sight backpack. Alternatively, the recorder can be kept in a nearby car.
This may seem like a bit of a headache to deal with, especially when
If you’re shooting without permits, chances are your budget is
trying to communicate with your sound recordist, but it really is the
limited and your crew is pretty small to begin with. That said, it’s still
only option you have when shooting guerrilla.
extremely important that you do not resemble a film crew in any
way. Even with a three or four person crew, you can draw unwanted
attention very quickly.

89
 If you’ve prepared accordingly, you’ll only have three easy steps left
once it’s time to film: get in, get your shot, and get out.

4. There Should Be No Gear in Plain Sight

Do not betray your intentions by leaving Pelican cases, gear bags,
scripts, and other paraphernalia sitting around. This is the opposite
of discreet.

Since even tripods can give you away, handheld is often your only
option. If more stability is a must for the look of your film, go ahead
and use a monopod, shoot with stabilized lenses, or use a camera like
the Sony a7 II that has built-in stabilization. Whatever you do, just
make sure you’re cautious when shooting with anything but a bare
camera body.

5. Plan in Advance and Work as Fast as Possible

The one and only way to properly execute a guerrilla shoot is to strip
your gear and crew down to the bare necessities and plan as
diligently as possible. This means doing your research online, going
location scouting ahead of time (to see which locations will be
easiest to shoot without permits), and preparing your crew as much
as you can.

Planning will make you far more efficient when it comes time to
shoot, which will subsequently allow you to work a lot quicker. Any
and all setups that are required (such as hair/make-up or sound
checks) need to be worked out in a different location close by.

90
SECTION 5

Five Things to Consider Before Shooting Slow Motion

Thanks to advances in camera tech, shooting slow motion video is easier than ever before. Still, there are some challenges to consider before starting
your next slow motion project.

For the longest time, independent filmmakers have been frustrated usage), and we’re finally starting to see a critical mass of cameras
by the fact that they weren’t able to capture high-quality slow offering that ability.
motion video. Up until recent years, options were mostly limited to
The GH4 can shoot at up to 96fps, the Canon C100 Mark II does full
shooting at 720/60p with a highly compressed codec (such was the
1080/60p, and the camera that many of us have right in our pockets
case with the 5D Mark II), unless you were willing to shell out a lot
– the iPhone 6 – can shoot at up to 240fps!
more money to buy or rent a higher-end cinema camera.
For the most part, this is great news – the more tools we have access
Over time, camera manufacturers started to recognize the fact that
to as filmmakers, the better. That said, the fact that many of us have
customers were demanding higher frame rates (for slow motion
been deprived of high frame rates for so long is starting to create an
overuse of slow motion content, much like we saw with the

91
overdone shallow depth of field that was occurring when the 5D MK well in music videos, some commercials, and in small doses in
II first came out. narrative films.

Now, let’s go over five things you should consider before you choose Unfortunately, many filmmakers end up using a ton of slow motion in
to shoot slow motion: documentary projects or narrative films. Obviously, there’s a time
and a place for slow motion in a doc or fictional film, but more often
1. You Need More Light than not, it just isn’t the right choice. In other words, don’t use it just
If you haven’t shot slow motion before, you probably aren’t because you can… use it if it’s the right storytelling device for your
anticipating just how much light you need in order to get a decent project.
exposure on your image. Shooting overcranked means that your
frame rate increases — and your shutter speed does too. 4. The Image Quality Will Be Diminished
No matter what format you’re shooting on, you’re likely going to
Following the 180 degree shutter rule, if you’re shooting at 96fps,
diminish the quality of your image significantly by shooting slow
then your shutter needs to be at around 1/200th of a second. This
motion. The reason behind this is simple math.
will drop your exposure significantly.
Typically, cameras have a set data rate that they record to per
This isn’t such a big deal if you’re shooting outside in the middle of
second. When you increase the amount of frames per second, you
the day. But if you’re planning on shooting an interior or a night
are spreading that data very thin by stretching it over many more
exterior, you’re going to need a lot of light... and you need to know
frames.
how to use it.
Even on the RED DRAGON (which of course shoots RAW), capturing
2. It’s Easy to Overdo It certain frame rates means that the minimum compression ratio
One of the easiest ways to annoy your audience is to overdo slow required is increased significantly. This doesn’t mean that you can’t
motion. Often footage looks great in slow motion, but that doesn’t capture a beautiful slow motion image, but it does mean that you
mean everything needs to be shot that way. If you’re not careful, you need to be especially careful about how you capture your image so
can fall into a pretty bad trap. Like most stylistic choices, less is more you retain the highest image quality possible.
when it comes to overcranking. Use it sparingly if you want to be
tasteful. 5. Storage Requirements Can Go Through the Roof
This will vary from camera to camera, but generally higher frame
3. It Might Not Be Right for Your Project rates require far more data/storage than standard frame rates.
Many shooters go a little bit crazy when they buy their first camera Certain lower-end cameras are able to keep the data rates about the
that has the ability to overcrank. Not only do they overuse the effect, same even when shooting overcranked, but most cinema cameras
but they use it on projects that don’t call for it. While there may not chew through cards like crazy when shooting at high frame rates.
be any hard and fast rules on this, slow motion generally works really

92
SECTION 6

Everything You Need to Know About CF Cards

Shooting on Compact Flash cards? Let’s take a closer look at everything you need to know.

A CF card (CompactFlash) is a small memory card used in many to 512GB.

modern camera systems. CF cards are durable, fast, and portable,
making them a great option for professional photographers and
filmmakers alike.

How to Read a CF Card

When it comes to CF cards, or any memory card for that matter,
there are two important things to consider: size and speed. On a CF
card, storage size is usually prominently displayed on the front. At
this point in time, CF cards come in a wide variety of sizes, from 4GB

93
Most CF cards display the read speed (the speed at which a write speeds of up to 155MB/s. However, as 4K and RAW recording
computer or device can get information off the card) on their face. becomes more prevalent, the need for faster CF cards will increase.
This is important, but for filmmakers or photographers the number
Most CF cards also display what UDMA class they are a part of on
that really matters is the write speed (the speed at which
the outside of the card. These classes are directly related to card
information can be written onto the card). The write speed is always
speed. CF cards are backwards compatible, meaning you can use a
slower than the read speed. However, nicer cards typically have a
UDMA 7 card on any camera that takes a CF card. However, just
write speed that is closer to the read speed.
because a camera accepts all CF cards doesn’t mean it is optimized
CF cards don’t always write at the same speeds either. So be sure to to get the most of that specific CF card. If you’re wanting to use a
check both the minimum and the maximum read/write speed of newer CF card on an older camera, make sure you update the
your card. Just because your card can write up to 95mb/s doesn’t firmware so you can use the maximum write speed.
mean it can sustain that write speed for an extended amount of time.
How CF Cards Work
Card read speed is usually displayed in either MB/s or “x”. It is more Practically, CF cards work via 50 pin holes that connect inside a
helpful to get the CF read speed written out in MB/s, but you can camera or CF card reader. These pins are definitely the biggest
easily convert speeds shown to MB/s by dividing the “x” number by downside to using CF cards over portable storage cards, because all
6.6666. For example, if a CF card has a speed of x1000 on the 50 pins must line up perfectly... and sometimes they bend, requiring
outside, it will have a read speed of around 150MB/s. maintenance to your camera or card reader. If this does happen to
you, it’s not the end of the world. A small screw driver should be
enough to bend the pin back into place… but obviously, use caution.

Once connected, a CF card is completely straightforward. Just

format the card and record. CF cards use either FAT32 or exFAT
On most modern CF cards you’ll see a small clapboard with a formatting, making them cross-compatible between Windows and
number. This refers to the minimum/guaranteed write speed we Apple products.
talked about earlier. If you’re a filmmaker, this number is incredibly
important because it is the speed at which a camera can write to the
card indefinitely. Your needed card speed will all depend on the
resolution, codec, and the camera you’re using.

For most non-RAW HD circumstances, a minimum read speed of

20MB/s should do the job. As of right now, some CF cards can reach

94
Compact Flash vs. SD Cards Which Brand is Best?
There is a lot of debate over which memory card format is better: SD There’s definitely a lot of debate as to which CF brand is better.
or CF. Both SD and CF cards have their advantages and Lexar and SanDisk are the largest brands, and more people tend to
disadvantages. SD cards tend to be much cheaper than CF cards, but use them. But other brands like Kingston, Transcend, and Komputer
CF cards tend to be faster and more durable than smaller, fragile SD Bay are all very legitimate alternatives.
cards. SD cards are easier to misplace or damage, but if you keep
your memory cards in a memory card wallet (as you should), it
shouldn’t be an issue.

As of right now, there aren’t many significant technical differences

between SD and CF cards, so it really comes down to preference.

If you’re going to be shooting in rough conditions, CF cards might be

the way to go. If you shoot more casually, SD cards might be better.

CFast Cards
CF (CompactFlash) cards should not be confused with CFast cards,
which were created to be the next step in CF card evolution. As of
right now, CFast cards are, as the name implies, faster than regular
CF cards. However, they are much more expensive than their CF
counterparts. For instance, A typical 60GB CFast card costs about
$400. For that price you can get a 256GB CF card.

Currently, it’s impossible to say whether or not CF cards will be

replaced by CFast cards. However, some newer cameras like the
Blackmagic URSA are already accepting CFast cards instead of CF.

The Future of Compact Flash Cards

It seems like CF cards are here to stay for at least a few more years.
The CF Association are theorizing that cards could reach a storage
size of 144 petabytes, or 144,000 Terabytes. Only time will tell... but
for right now, CF cards are a safe bet for photographers and
filmmakers alike.

95
SECTION 7

Why You Shouldn’t Always Be Shooting RAW

With RAW shooting cameras so readily available, many filmmakers are opting to shoot RAW as much as possible. Although there are some huge benefits
to RAW image capture, there are also some major downsides. RAW isn’t always the best choice.

There is no denying that a RAW image will almost always look want to touch on some of the reasons why you might NOT want to
better than the same image captured with a compressed format. shoot on raw, since most of us already understand the many
Just like shooting RAW still photos (as opposed to JPEG), RAW benefits of capturing a raw image.
video delivers a final image that has maximized dynamic range,
detail, and overall image quality. If you’re reading this book, chances Limited Camera Choice
are you know very well just how beneficial the RAW format can be. Many shooters make the mistake of believing that they need to
shoot raw in order to achieve the results they are looking for –
However, no matter how great RAW is, there are many instances specifically when it comes to narrative. This unfortunately leads
where it isn’t the right choice and I decide to shoot straight to them to limit their camera choice severely by eliminating many
ProRes, or to another compressed codec. Throughout this post, I

96
other great camera options than may not shoot raw. This can be When you consider the amount of storage that you need not only to
particularly problematic in a number of scenarios, one of which store your dailies, but also to make backups of everything – you’re
being low-light shooting situations. For example, you might want to looking at a pretty big expense and a much more involved post
shoot a scene for your film at night using available street light, which process. You might feel like these particular issues aren’t a big deal
in itself is a difficult task. for you, and maybe they aren’t…but it’s worth pointing out that a
huge amount of television series and feature films that shoot on the
If you don’t have a lot of experience with many RAW shooting
Arri Alexa (which can shoot raw or ProRes), opt to shoot ProRes in
cameras (let’s use the RED Epic as an example in this case), you might
order to streamline their workflow. Most professional DPs have no
not realize that most of the current raw cameras that are on the
problem shooting to ProRes, even though it’s a compressed format
market don’t perform well in low light. So if you were to go out and
since they know how great that image can look and they are
rent an Epic to go and shoot your night scene, you might end up with
confident enough in their skill set to not have to rely on raw to save
some really grainy and unusable footage. Yes, it will be raw, but it will
them in post.
likely look terrible. Conversely if you were to shoot on a camera like
the Canon C300, you would likely be able to get much better results Color Grading Is A Must
even though the camera itself isn’t nearly as powerful, and is If you plan to shoot RAW, you need to plan for a pretty involved color
recording to a heavily compressed format. grading session. Chances are, even if you are shooting to ProRes or
any other compressed format you are going to be color grading to
The key takeaway when it comes to camera choice. The ability to
some degree, but when shooting raw the overall workflow becomes
shoot raw should never be your number one concern unless you are
more dense.
shooting something very specific that absolutely needs the
additional flexibility of raw. Having the ability to shoot raw when you Raw can be immensely helpful when dealing with a blown out
need it is great, but if it is going to mean that you are choosing a window, or any number of other situations that were difficult to
camera that limits your shooting options in other ways – it’s never shoot on the day of. But in many cases you simply don’t need the
going to be the best choice. power that raw offers. When an experienced DP hands off a ProRes
project you’ll likely be able to color grade it a lot more easily than
Massive Data Requirements
when an inexperienced DP hands off a project. The reason of course
Any raw camera is going to require a lot of storage, which can
being that the experienced DP has lit and exposed their image in a
become very costly and cumbersome to deal with. While some
way that calls for a less intensive color grading session, and
cameras (such as REDs) will shoot to a compressed raw format, many
therefore needs to rely less on the raw image format.
others (like the BMCC) shoot uncompressed raw, and either way the
file sizes for any given raw clip are going to be very large. Conclusion
RAW is a great format. However, there are some major
considerations when it comes to shooting raw including the limited

97
camera options you have, the big data requirements, and the need
for a more involved color grading process. There is something to be
said about shooting with a camera that is simple to use (especially on
a small scale shoot) and will allow you to stay light on your feet and
not miss critical shots as a result of becoming bogged down with the
raw format. You need to approach your choice carefully.

98
SECTION 8

Three Tips for Dealing With Rolling Shutter

DSLR video has improved dramatically over the last few years, but rolling shutter is still an issue. Deal with it using these three tips.

No one likes the look of rolling shutter artifacts. They’re a pesky the frame from top to bottom, leaving room for visual artifacting in
side effect of shooting on DSLRs (or other cameras using CMOS the frame.
sensors) and have the potential to ruin otherwise fantastic footage.
In other words, the top and bottom points of any given frame are
Rolling shutter issues can plague footage in any number of ways, but
not captured at the exact same moment, which is why images can
most often by causing a horizontal skew when whip panning, or the
appear skewed under certain circumstances.
“jello effect” when shooting on long lenses (or handheld).
You might wonder why more manufacturers don’t use global shutter
Rolling shutter skew is simply a result of the speed at which a frame
sensors on their cameras. There are a number of reasons for this. In
is scanned and captured on a CMOS sensor. Unlike global shutters,
a nutshell, there’s usually a tradeoff in terms of performance
which capture an entire frame all at once, a rolling shutter will scan
between rolling and global shutters. A rolling shutter has issues with

99
skew and distortion, but can have better low-light performance and handheld work. As you might imagine, using a shoulder rig is one of
dynamic range. the best ways to eliminate rolling shutter (or at least reduce it
significantly), but it needs to be set up just right. Rigs that are heavier
On the other hand, the global shutter may never be able to achieve
but still well balanced are an absolute must for even the most basic
the same DR as its rolling shutter counterpart, but it would perform
handheld work.
much better for handheld work, action scenes, and visual effects
work. Alternatively, you might want to consider a small gimbal-based
stabilizer like the Movi M5 or a device like the Nebula 4000. Or, if
VFX shots in particular can be very challenging to deal with when
you are unable to use a rig for any reason, the next best thing would
working with footage suffering from rolling shutter artifacts. For a
be to use a stabilized lens. Any lens with built-in image stabilization
VFX artist to do their work best, they need to be able to accurately
will decrease rolling shutter artifacts substantially, but a well-
track footage and match 2D/3D elements to the source footage –
balanced rig is always going to give better results.
which can be a huge challenge when the source material isn’t stable
enough. 2. Know Your Angles
Sometimes knowing how not to use a tool is just as valuable as
But even if you aren’t doing VFX work or shooting action sequences,
knowing how to use it. Every camera has its limitations, whether in
you still need to be careful when shooting on a camera that is prone
the areas of dynamic range, sharpness, detail, color accuracy, or
to rolling shutter problems. A handheld shot using a long lens can
otherwise. If your particular camera struggles with rolling shutter,
turn into complete jello under the wrong conditions, and the skew
then sometimes the best option is to work around its limitations and
associated with any number of shooting situations can be a huge
avoid shooting in situations where the camera is going to have
distraction in the editing room.
issues.
The good news is that there are ways to offset the rolling shutter
One example of this might involve shooting a moving train. If you
issues associated with many CMOS sensors. Here are three of the
were to point your camera at a train that is moving horizontally from
simplest ways to work around it:
screen left to screen right, the image would be very skewed, even if
1. Use a Rig you weren’t moving the camera at all. Just like a whip pan, the sensor
This first point applies most specifically to micro-jitters, which can be would be unable to read the entire image at once and would
an issue with nearly any camera, but can be exaggerated by rolling therefore cause a horizontal skew in the image.
shutter.
While you’re on set, the only option you have (other than shooting
Using any sort of stabilizer or rig will always be your best bet when it on a different camera) is to change your angle. Instead of shooting
comes to minimizing micro-jitters. Obviously a tripod or monopod head on, you could opt to shoot from a 3/4 angle or any number of
can work perfectly in most instances, but things get a bit trickier for other positions that would help you avoid the skew entirely. It may

100
feel frustrating that your creative choices are limited, but knowing
your limitations will always help you get the best results and avoid
issues down the road.

3. Fix It in Post

The phrase “fix it in post” has become a cliche at this point, but when
it comes to rolling shutter, sometimes it actually is the best option.
Depending on the severity of the rolling shutter artifacts, you may
be able to fix the image during post-production by using any number
of different plugins for various NLE systems or compositing
software. There are dozens of options out there, so I would
recommend doing a quick google search to see which tools work
best for your camera and software combination.

With all of that said, I would never rely on fixing your rolling shutter
in post. The best results will always be achieved by avoiding rolling
shutter artifacts in the first place. But if you are in a sticky situation,
it’s great to know that there are some editing tools that can help you
deal with these problem shots.

101
SECTION 9

Cinematography Tips For Horror Filmmakers

Horror is a very specific genre that calls for some unique lighting techniques. These five cinematography tips will make just about any horror film more
stylized and effective.

Horror films are all about tone, texture, and mood. Unlike many focus on here. Unlike lighting a comedy or drama, more rules can
other genres that rely more heavily on other elements (dialogue, often be broken when shooting a horror film, and in many cases that
plot points, etc.), great horror films are all about style. That’s not to translates to a more effective final product.
imply that a great horror film shouldn’t also have excellent dialogue
If you plan on shooting some horror material in the future, then this
and a great plot, but rather that those elements often take a back
chapter is for you. The five cinematography tips listed below will
seat to the immersive mood and experience that a great horror film
serve as some fundamental guidelines that you can follow
delivers.
throughout your time on set.
The two most important elements in creating that mood are sound
design and cinematography, the latter being what we’re going to

102
1. Shoot Through Things 3. Use Haze
Some horror filmmakers are drawn to extreme closeups, but doing Using a tasteful amount of haze (or fog) can add a lot of texture to
the exact opposite can be far more effective. Rather than always your scene. This is one of the oldest tricks in the book, but it’s still
filling up your frame with your actors faces (just because it looks used on nearly every set (and for good reason). There’s absolutely no
intense), challenge yourself to go wider. substitute for the look and feel that haze can bring to your scene,
and it’s especially effective when it comes to the horror genre.
Imagine a scene where an actor is sitting alone in their kitchen. An
extreme closeup on their face may show us some added emotion, but Use a hazer or fog machine to add just a touch of haze to your scene,
a wide shot taken from outside the house (looking in) could be far and be sure not to go overboard. A little bit of haze will go a long way,
more powerful. and much like underexposing, it can really help to set a unique and
mysterious mood to your scenes.
Not only are you showing the isolation of the character, but you’re
also creating a voyeuristic and unsettling feeling by shooting 4. Don’t Be Afraid of Colored Gels
through a pane of glass, which is a technique that can be very I almost always avoid using colored gels when shooting, unless I’m
effective under the right conditions. using them to correct the color temperature of a light (for example,
balancing tungsten to daylight). That said, if I’m ever going to use
2. Underexpose
them, it’s on a horror film. That’s one of the only genres where I feel
As DPs, we have it drilled in our heads to always expose perfectly.
they can work exceptionally well.
We have more tools than ever (both in camera and otherwise) that
enable us to nail our exposure. Though, in some cases, that isn’t Red gels in particular can be really effective for horror, as the color
what’s going to serve the story most effectively. red can inherently make your viewers feel unnerved. Avoid using
colored gels in the way that a photographer might (such as on the
On a horror film, underexposing can be extremely effective as it’ll
rim light) and instead use them on your key.
leave more areas of the frame in the shadows and create a more
mysterious feeling. Let’s say you’ve got a scene that takes place in a dark hallway of a
club. If your key light has a red gel on it, it will bleed over the faces of
Although you could technically expose normally and just color grade
your actors and create a really stylized look. Again, know when to
your footage to darken it in post, the end result won’t be quite the
use this and when not to. If you mix colored gels with regular lighting
same. You want to actually light your scene in a way that feels
(or natural light) you may just wind up with a strange looking image.
organically underexposed, and bring that out even more in the grade.

Don’t push things too far though, or you won’t be able to bump it
back up in post if needed. About a stop of underexposure is all you
need to set the tone.

103
5. Find Unique Angles
The most obvious example of a unique angle that works well for
horror is the dutch tilt, though just about any unconventional angle
can help play into the vibe of your film.

Much like the other tips on this list, you want to use your camera
angles to create an unsettling feeling within the viewer. The best
way to do that is to create an image that looks off balance. That’s
why the dutch tilt works so well.

Other examples would be a bird’s eye view or a very low angle shot
looking up. Both of these are unique perspectives that we rarely see
on film, and can really help to jolt the audience into the headspace of
the characters.

Always be sure that whatever extreme camera angle you’re going for
still suits your scene. The last thing you want is to stylize a scene or
moment in a way that isn’t true to the story.

104
SECTION 10

Cinematography Tip: Use Fog To Add Depth to Your Shot

A little haze goes a long way. Fire up the fog machine to add dimension and depth to your shots!

There’s a good reason why we tend to love images with lots of However, DOF is definitely not the only way to create depth in your
depth, and it has a lot to do with the way we see the world. We see image and it certainly isn’t an option you can always rely on. For
and experience the world in 3D space, and when we watch films and example, if you’re working in a cramped space and aren’t able to
enjoy great cinematography, we want the aesthetic of the 2D shoot on a long lens, it simply may not be possible to achieve the
medium to feel as three dimensional as humanly possible. This is depth you need based on your optics alone.
also why great cinematographers often talk about how their
Arguably one of the best ways you can achieve depth (outside of
favorite lenses have a 3D feel to them. They’re not referring to
your camera/lens choice) is to use a hazer or fog machine. The
literal 3D filmmaking, but rather the optics of the lens.
slightest bit of haze in a room can add a tremendous amount of
The DSLR revolution has allowed filmmakers of all kinds to use depth to your scene, as it will create a large variance in the aesthetic
depth of field to easily create depth in almost any shot quite easily. between the foreground and background.

105
On the same note, you definitely don’t want to go overboard with
the fog because it can become cheesy very quickly. In fact for this
technique to work well, you shouldn’t really see it at all – you just
want to ‘feel’ it in the image. So the next time you’re stuck using a
small sensor camera, or you’re shooting in a tight space and just can’t
get the depth you need, try adding a bit of haze. You’ll be surprised to
see just how effective it can be.

106
SECTION 11

How to Shoot Gorgeous Documentary Interviews

Beautifully shot documentary interviews are vital to your film’s success. Get the best footage possible with these tips.

Years ago, most documentaries were synonymous with lower filmmakers, but also because the documentary genre in general has
production quality. They were typically shot on lower-end video been morphing.
cameras and with less involved setups. There were, of course, those
The point is – if you are setting out to shoot a documentary today,
documentaries that went against the grain and strived for higher
the bar has been raised. To secure distribution, you are going to
production value, but they were few and far between.
want to deliver the best creative product across the board... and
Over the last 5 to 10 years though, that has changed. The average your approach to documentary interviews is one of the most
documentary now looks just as good as many narrative films. This is important components to consider.
largely thanks to the fact that documentary shooters are able to
There are many ways you can increase production value on a doc,
have access to some of the same cinematic tools as narrative
but for the purposes of this article, let’s focus on interview footage.

107
In many documentaries, interviews account for 50% of the overall several motorized and automated sliders from companies like
screen time — and they are also one of the few environments on any Redrock Micro that allow you to automate the process.
doc shoot where you have a lot of creative control. For those reasons
and more, you want to maximize the quality and substance of your 2. Shoot in 4K
interviews. Below are three simple ways that you can increase the Shooting in 4K means you can reframe your shots in post, but a lot of
quality of your interviews. people are purists. They approach digital cinematography in the
same way that they approach film. That means that every shot is
1. Use a Slider composed in camera the way it is intended to look in the final
Sliders are your best friend when it comes to documentary product, as opposed to simply shooting with the intention that
interviews. We’ve all watched documentaries where the interview everything will change in the editing room.
footage was just dull. More often than not, the root problem of those
With all that said, interviews can be treated differently since the
interviews comes down to camera movement. Even a well-composed
editorial process calls for a different approach. While editing a
and well-lit shot will only sustain the average viewer’s attention for
documentary interview, there will be times when you desperately
so long, which is why most interviews are covered up heavily with b-
need a cutting point but simply don’t have one. If you shot your
roll.
footage in 4K, then you have solved that problem by being able to
That said, there are times when you want to linger on an interview push in on your 4K shot after the cut point, making it feel like you’re
and really see the person as they are speaking — especially in more cutting to a tighter angle.
emotional moments. This can make things tricky in the editing room.
So even though 4K may still be overkill for many productions, you
You end up having to decide between cutting away to b-roll to make
might still want to shoot your interviews this way to keep your
things more visually interesting or staying on the interview shot, but
options open in post.
losing momentum in the pacing. This is where sliders come in.

The most subtle slider move during an interview can make a world of 3. Use a B-camera
difference. You don’t need to have a massive dolly or a really obvious Building off of the previous point, another really great method for
move for this technique to work. In fact, it’s better if you don’t. keeping your options open in the editing room involves shooting
Ideally, you want to have a very slow slider move that’s just barely with two cameras. Depending on who you’re interviewing and how
noticeable so that viewers are continually drawn in to the footage, comfortable they may be on camera, you may need to do a lot of
but aren’t distracted by the camera move. editing to make their interview feel for cohesive and fluid.

In order to execute this technique well, you will likely want an For instance, if the interviewee says a lot of “ums,” you’re going to
assistant there to operate the slider for you so that you can still want to have the ability to cut away whenever possible so that it
conduct your interview effectively. Alternatively, there are now doesn’t distract the viewer. You could use the 4K punch in method

108
described above, but an even better alternative is having a second
camera angle to cut to.

Most often, a second camera during an interview setup will be

placed at a 45 degree angle to the talent to capture an entirely
different look. Profile shots can also work really well too, depending
on the aesthetic you are going for, as can a tighter framed shot… But
all that really matters is that your shot is different enough from your
A-camera that the cuts aren’t distracting.

Keep in mind that you may also need another camera operator,
depending on how you’re going to set up your shots and whether or
not a slider is involved,

109
SECTION 12

Lighting Tips to Consider Before Shooting Your Next Film

Lighting is the number one factor to take into account when crafting a cinematic image. Follow these lighting tips to get the most out of your shot.

Lighting is one the most most critical components of cinematic It’s common for filmmakers today to feel that lights are no longer as
design. Proper manipulation of light is vital to delivering the crucial to the filmmaking process as they once were, seeing as high-
intended sentiment of a scene, and therefore can have a great sensitivity cameras are able to expose the image properly without
emotional impact on how your stories are received by an audience. the use of a proper light setup, even with nighttime exteriors,

Everyone knows this, yet so many make really poor decisions when Unfortunately though, this type of corner-cutting never yields good
it comes to lighting. One of the biggest issues that seems to plague results. Just because an image is technically exposed properly
indie films today is a general lack of lighting, usually as a result of doesn’t mean it looks good or that it’s the right look for the story. So
attempting to shoot with high-sensitivity cameras like the Sony a7S here are a few key lighting tips to take into account before lighting
or Canon C300. your next film.

110
Choose Between Soft and Hard Light In some cases, projects can benefit by going with a hard lighting
One of the best things that you can do when approaching the aesthetic (think Breaking Bad) and will intentionally work with direct
lighting setup for any film is deciding whether you want to go for a sunlight and other bright sources to create dramatic shadows. In
soft or hard aesthetic. Obviously you can change the lighting setup other cases, diffusion is used to create more forgiving (softer) light
from scene to scene, but if you want your film to have any sort of sources.
consistency, the lighting will largely fall into one or these two
There’s no right or wrong way to approach soft vs. hard light, but the
categories.
big takeaway here should be that you need to define your look early
on. Only then will you be able to take the necessary steps needed to
execute your look.

It’s pretty easy to make lighting decisions that will help you achieve
the look that you have in mind. But the important first step is often
overlooked. A lot of indie films end up having no choice but to use
Use Practical Lights for Interiors
hard lighting on their film, as they haven’t thought things through
enough and didn’t budget for powerful HMI lights. Or maybe they Just because you don’t have a big lighting budget doesn’t mean that
didn’t spend enough time in pre-production to come up with you can’t light your film. The benefit of high sensitivity cameras (like
solutions to combat the harsh sunlight. the Canon C300 or Sony a7S) isn’t so much that they can shoot in no
light, but rather that they excel in low-light situations. Those two
scenarios are very different. What that means is that if you need to

111
shoot your film without a proper film lighting kit, you can certainly
get away with that – but in order to maintain a visually pleasing look
to the film, you’re going to at least need to know how to use practical
lights to craft the image.

If you don’t already know, practicals are any lights that actually
appear in the shot or on the set. These could be overhead lights, desk
lamps, floor lights, or any other typical light that you might find in
your average interior location.

A whole lot can be done with practical lights to shape the mood of
your scene. In many cases, they are preferable to film lights, as you
can set things up in a way that gives your actors more flexibility on
set, allowing them to have more freedom to improvise and be less
specific with their marks.

In order to really nail practical lighting though, you can’t just simply
show up and expect the lighting to work for your needs – it still takes camera may be in low light, there is no substitution for actually
a lot of effort. You’ll want to get various types of household bulbs in lighting your scene properly.
varying strengths to use in your fixtures. And just like you would The good news is that if you are shooting with a camera like the a7S
with film lights, you’ll need gels, black wrap, and other tools to help or C300, you can easily get away with using a minimal lighting setup
you control the output, color temperature, and spill of the practicals. (such as battery powered LEDs) and still get great results. If your
LED Panels for Night Exteriors camera can expose a clean image in a very low-light situation, then
that will get you most of the way there. Just be sure to use additional
Night time exteriors are probably the most poorly executed type of
lights such as LED panels to kick in a key light or a rim light on your
setup on most low budget indie films. This is especially true of films
talent. These panels are relatively affordable and will go a very long
that attempt to shoot on ultra-high-sensitivity cameras without the
way in helping you shape your image.
use of light. As touched on earlier in this section, just because you
don’t need lights to properly expose your image doesn’t mean that
you’re going to wind up with a final product that looks good.

You still need at least some light to create the right highlights,
shadows, and overall mood in your shot. No matter how clean your

112
SECTION 13

Five Easy Tips For Nailing Your Exposure On Every Shot

No matter what camera you’re shooting with, perfect exposure is the biggest key to achieving a beautiful image. Here are five easy tips that will help you
get it right every time.

Whether you’re shooting to a compressed format or to RAW, nailing monitors are unable to compete with bright light sources, such as
your exposure in camera will improve the look of your image and sunlight, which can make monitoring a huge challenge during day
save you hours (or days!) in post-production. The tips below are exteriors. Although it may seem like you’re getting an accurate
especially relevant when shooting with cameras that suffer from visual read on your image, you’re probably judging your overall
low-bitrate recording. exposure incorrectly. The only way to combat this is by using an
EVF.
Use an EVF During the Day
Outside of using critical exposure tools (which we’ll get to soon), If you have a camera that has a strong EVF built right in (like the
one of the most important factors when it comes to exposure is C300), then things are quite simple for you. Just make sure to use it
being able to trust your eye. Unfortunately, most cameras and

113
over the LCD screen. However, if you have a camera with a poor EVF
(or none at all), it’s highly recommend that you invest in one.

Understand Your Zebras

Unless you’re extremely new to shooting, you’ve probably already
been using zebra stripes to some extent. For those that don’t know,
zebras can be set to effectively highlight a portion of your image that
is overexposed, so that you know when your shot is clipping to white.

It sounds easy, and in many cases it is. However, there are some
snags that you need to know about when working with zebras. For
example, many shooters expose for the zebras (so as not to
overexpose their shot), but then they end up underexposing their
talent.
The Histogram Is Your Friend
In other words, if there was a lamp in the back of the shot that was I’m often surprised that so few up-and-coming cinematographers
blowing out, a lot of amateur DPs would be tempted to expose the really know how to use a histogram, considering that it’s one of the
image so the lamp doesn’t clip... but then the rest of their image ends most critical on-camera tools that can be used to dial in exposure.
up being severely underexposed. Always remember that it’s okay for While not all cameras have a built in histogram, many do – and I
parts of your image to clip – at least within reason. Just never would strongly suggest that you start using yours properly.
sacrifice the skin tones or your talent in general.
The histogram may look confusing at first, but really it’s very simple.
Don’t Be Afraid of Light Meters The histogram simply displays the luminance (dark vs. light) values
Many DPs still swear by light meters, even if they aren’t always from left to right, so that you can see where your image falls. If the
mandatory. If you’re shooting on a camera that has very limited histogram is all crunched over to the left side, it means the image is
dynamic range, it would be advantageous for you to use a light meter underexposed. If it mainly falls on the right side, it likely means the
so that you can properly set your lighting ratios. image is overexposed. For most situations you will want it
somewhere right in the middle, but there are definitely exceptions to
We all want cameras with high dynamic range so that our lives can that rule.
be made easier on set. But the truth is, a camera with 7 stops of DR
can look better than one with 14 stops if it’s lit properly. It just comes Know Your Camera’s Quirks
down to making sure that the lighting setup keeps the exposure A big part of nailing your exposure is understanding the quirks and
within those 7 stops. In order to do that well, a light meter is differences of your current camera. For example, in the previous
essential. point we mentioned that you usually want to have your exposure fall

114
somewhere in the middle when using your histogram, but that isn’t
always the case. For example, certain cameras hold detail far better
in the highlights, which would mean you might want to ‘expose to the
right,’ or slightly overexpose intentionally so that you are left with
the best possible image in post. This is just one of many dozens of
examples of camera quirks, but the key takeaway here is that you
absolutely need to know your camera and understand how it needs
to be treated to achieve the best results when exposing your image.

115
SECTION 14

Four Cheap Practical Lights That Can Work Wonders On Set

Placing an emphasis on lighting is one of the most effective ways to keep your production value high. The four lights on this list will allow you to not only
light your film beautifully, but do it on a minuscule budget.

Nearly every indie filmmaker will rent or buy a standard lighting kit often use the quirkiness of these lights to your advantage…and
for their productions (such as an Arri or Lowell kit). While these ultimately give your film a distinct look.
types of lighting kits are reliable and versatile, inexpensive
It’s not just filmmakers on a budget that are known to make use of
consumer lights may also have a place in your production. Unlike
practical lights either. Many well-established filmmakers (like David
traditional lighting kits, practical lights (that can be bought at places
Fincher for example) are known for utilizing household lights or
like Home Depot or Ikea) are often sold at a fraction of the cost of
work lamps in order to achieve a desired effect. So if you’re looking
film lights, since they don’t have the same functionality built in.
to save a few bucks on your next production, or just want to try
While the lack of functionality can seem like a big downside, you can
something new and different – these lights are for you:

116
1. China Balls to give a similar aesthetic to shooting with regular LED panels or at
Nearly every lighting store or home furnishing store (such as Ikea) times even flourescent Kinos. Use these as a soft key or a fill light, as
will sell these china balls, and generally they go for under $20. They they do a great job of illuminating skin tones in a natural way.
emit a beautiful soft light that can be used as a key, fill, or even a
4. Clamp Flood Lights
background light and are extremely adaptable. For daytime use, you
These good old fashioned flood lights have been used for decades by
can switch to daylight balanced bulbs easily, which makes them such
filmmakers and photographers on a budget. They can be bought for
versatile and valuable tools much like the work lights above.
as little as $9 (without the bulb) at your local hardware store, and
They can be mounted on a light stand, used on a boom pole (for run much like the construction lights on this list, they offer a great
and gun/walking scenes), or rigged up just about anywhere you can solution for inexpensive high power output. You can use a single
imagine. Many film lighting manufacturers now make more lamp as a high key (or add diffusion to it if you prefer) or combine
expensive “pro” versions of these lights that have a stronger ball (the multiple lamps to illuminate an entire room. There is a reason why
cheap ones are made of paper), so if you want to use a light like this these have been used for so many years, and it’s not just because
on multiple shoots, you might want to consider a more heavy duty they’re cheap!
version.
Final Thoughts: Use What You Need
2. Work Lights When approaching the lighting setup for any given project, you
These common construction lights can be bought at just about any never want to take a one-size-fits-all approach. Always carefully
hardware store for about $30, and considering the amount of power consider what the stylistic and creative needs are of your project,
that they can generate, they offer some of the best bang for the buck and what your vision is for the overall aesthetic. From there, you can
out there. You can buy these lights with tungsten or daylight start to build your kit in a way that is unique and specific to your
balanced bulbs which makes them extremely versatile, and their project.
strong output makes them fantastic options for demanding lighting
situations such as night exteriors. These lights have been used in
countless feature films (even large-scale productions such as Fight
Club), and are a must have for DPs on a budget.

3. Energizer LED Folding Area Lantern

These little light panels are a relatively new product and available at
nearly any Target, Walmart, or supply store. They are often used for
camping, as a means to light up a completely dark area at night. As
such, they well-suited for use on a film set. The light quality and fall
off from these little panels can be brilliant, and I generally find them

117
SECTION 15

Tips for Getting Good Shots in a Bad Location

Stuck with a bad location? Here are a few tips for getting better shots when your location is less than ideal.

In a perfect world we would all be able to shoot in whatever location 1. Show up Early and Make a Plan
we want and control every aspect of the filmmaking process. While you should always make it a point to show up early for your
Unfortunately, we don’t live in a perfect world. productions, it’s especially important if you’re shooting in a less-
than-ideal location. An early arrival allows you to create a plan of
Unless you’re working on a big-budget shoot you are likely going to
attack for how you’re going to deal with the various obstacles
have to shoot in some less-than-ideal circumstances. Thankfully
keeping you from getting great video. This is an easy one.
there are a few things you can do to help make a bad location better.
Follow these ten tips for getting the most out of every location. 2. Set Expectations With Clients
Clients are often clueless when it comes to selecting a good location
for shooting video. Don’t assume that they know what makes a

118
location good or bad. If your client is insisting on shooting in a 5. White Balance for Blue/Orange and Green/Magenta
specific location, let them know possible pain points that may be Most bad locations share a common flaw… fluorescent lighting.
associated with that locale. Setting these expectations will help Fluorescent lights are bad for multiple reasons: buzzing, flickering,
minimize surprises once you’re in the editing bay. and strangely tinted light. If you simply must shoot with florescent
lights, you’ll likely find your footage more green than normal. On
3. Moving Blankets
most cameras you can adjust your white balance from blue to
orange, but this will not effect the green tint found with
fluorescents. On most high-end cameras you can white balance to
adjust for blue, orange, green, and magenta deep in the menu. Make
sure to adjust both settings if you want an ideal white balance in
fluorescent lighting.

6. Filters
In day-to-day life, mixed lighting isn’t that big of a deal, but when it
comes to shooting video it can be a nightmare. Instead of trying to
Sound is normally the biggest obstacle to overcome in a challenging
work with different color temperatures, use colored filters. You can
location. It’s always best to seek out locations away from roads,
make your video easier to color correct in post by filtering your
crowds, and airports. However, if you simply must shoot in a specific
lights. Get a large roll of orange, blue, magenta, and ND filters and
location, one tool you can use to dampen echo and outside noise is a
cut them to certain sizes as needed.
moving blanket. The coarse, thick material is perfect for mounting on
walls, covering windows, or simply laying on a concrete floor. Unlike 7. Bring More Lenses
acoustic foam, moving blankets tend to be very affordable and
versatile.

4. Know the Schedule/Move the Shooting Time

You’ve been here before…

You begin shooting an interview only to be interrupted by people

making noise and constantly walking onto your set. This all-too-
common problem can be incredibly annoying. Let your clients know One of the best ways to stay flexible on set is to have an arsenal of
that you’ll need time and space away from people. Typically this lenses at a variety of focal lengths. Narrative films are typically shot
means shooting in the evening. on prime lenses, but if you’re shooting a corporate video you can

119
normally get away with shooting on a good zoom lens. The goal is to
stay versatile in less-than-ideal circumstances.

8. Know What’s Important

A video shoot is full of choices and compromises. It’s important for
you to know the difference between what’s important and what’s
not and to discern each in the moment. There’s nothing wrong with
wanting to make your finished product as nice as possible, but
knowing when to draw the line is important for you as a director/
producer.

When you’re in a time crunch, spend the time fixing things on set
that you simply can’t correct in post.

120
SECTION 16

What to Know About Shooting With Vintage Lenses

Follow tips when outfitting your digital camera with vintage glass.

Perhaps it’s the hip look or the affordable pricing, but there’s Sony E. These adapters come in a variety of prices, some for under
recently been a vintage lens revival in the photo and filmmaking $10.
community. For now, you can still get many lenses for a bargain –
but with the recent uptick in popularity, the price of used lenses may 2. Vintage Glass Is Cheaper Than Modern Glass
increase as well. If you compare a vintage lens to a modern lens, you’ll find that most
vintage lenses are much cheaper. For example... an Olympus OM
Whether you are new to vintage lenses, or just interested in 50mm f/1.4 can be picked up for around $90 on eBay, compared to a
learning more about them, here are ten things you should know. comparable new Canon lens which goes for $400.
1. You Can Use Vintage Glass on Your Camera 3. Most Vintage Lenses Have External Aperture Control
Using simple adapters, you can adapt vintage lenses to a variety of If these vintage lenses didn’t have external aperture control, it
modern lens mounts including Micro 4/3, Canon EF, Nikon F, and would be very difficult to use them in modern productions. This is

121
due to the camera’s inability to communicate with the lens. However, it around your vintage lens. The whole process should take about an
when you have external aperture control, you can change the f-stop hour, but the investment is definitely worth it.
with a simple wheel turn.
8. Most Vintage Lenses Have Some Vignetting... But in a
4. Most Vintage Lenses Can Be Easily De-Clicked Good Way
De-clicking a lens can be an extremely scary process, especially if Distance and size aren’t always perfect with vintage glass, so you can
you’re trying to de-click a modern lens. Thankfully, vintage lenses expect to see vignetting with most older lenses. While some would
don’t have the same build as modern lenses. Vintage lenses are argue that vignetting is a bad thing, it can sometimes create an
usually held together by easy-to-access screws, making them simple interesting effect. This is particularly helpful if you are trying to get a
to take apart and de-click. You also don’t have to worry about vintage look with your lens, but it all depends on your personal
damaging computer components inside vintage lenses. preference.

5. Some Vintage Lenses Have Awesome Distortions. 9. Buying Good Adapters Is Crucial When Using Vintage
While it may not be ideal for shooting modern projects or weddings, Lenses
the distortions created by shooting on vintage glass can be While you may be able to pick up a cheap adapter for $10 on
incredibly stylish and unique. Vintage glass usually has more Amazon, that doesn’t mean it’s a good adapter. Every millimeter
chromatic aberrations and the focus can be a little soft... but if you’re matters when adapting for vintage lenses. So, if an adapter was
wanting to get the popular ‘Instagram/hipster’ look, vintage glass is cheaply made, it could potentially have focusing issues or mess up
perfect. your camera. Be sure to do your research and go for quality when
you’re picking a lens adapter.
6. Vintage Lenses Can't Autofocus on Your Camera
Because your modern camera wasn’t designed to communicate with 10. Some Vintage Lenses Are Coming Back
old lenses, you will (probably) not be able to use the autofocus If you’ve been following the Petzval lens, then you’ve probably seen
feature. There are a few exceptions with vintage Nikon F mount the amazing footage and images it can create. In short, the Petzval
lenses, but even then it can be difficult to get the old autofocus parts lens was a vintage lens from the mid-1800s that has recently been
to function correctly. This makes it difficult to use vintage glass in a recreated for the modern user. Instead of having to buy an adapter,
photography context, but this shouldn’t be a problem for film or the Petzval lens comes natively in both Canon and Nikon lens
video projects. mounts.

7. You Can Add Gear Rings to Vintage Glass to Make

Them Cine-Lenses
The internet is full of adaptable gear rings that can make any lens a
‘cine-lens’. All you need to do is buy a simple gear ring kit and secure

122
SECTION 17

Five Tips For Capturing Better Low-Light Footage

Full-frame DSLRs unlocked the potential of shooting in extremely low-light situations by delivering great results at high ISOs. However, the vast majority
of DPs today are not shooting full frame and need to think outside of the box when it comes to capturing images in low light.

Over the last few years, DSLRs and other digital cinema cameras average DSLR or cinema camera today will not perform well in
have improved by leaps and bounds. The average camera today extremely low-light situations. In fact, many cameras today don’t
offers better codecs, more video functionality, higher frame rates, necessarily offer any better low-light performance than their
and other essential improvements that have proved to be invaluable predecessors. For instance a Lumix GH4 (which is a fantastic
for so many shooters out there. One area that hasn’t improved as camera), is not great in low light. It would undoubtably be
dramatically across the board is low-light performance. outperformed in a low-light shooting situation by even a first
generation Canon 5D MK II.
While it might be true that cameras like the Sony a7S or the Canon
C300 have given us remarkable low-light performance, the fact of Take better low light shots! Follow these five tips for success…
the matter is that these cameras are the exception not the rule. The

123
1. Always Shoot at ISO 800 or Below shoot at F0.95 (like the Voigtlander lenses), so make sure to do some
Every camera is different and will inevitably have variances when it research and pick up the best glass you can.
comes to ISO performance. As a general rule of thumb, it’s
3. Shoot From Farther Away
recommend that you shoot at a maximum ISO of 800. Even cameras
One of the issues with shooting in low light is that you will often
that can shoot cleanly at ISO 1600 or 3200 will still never perform as
encounter focusing issues since you’re likely going to be shooting
well in terms of image quality, color depth, and dynamic range as
wide open on very fast lenses. A full frame camera with a 50mm f/1.2
they would at a lower ISO.
lens will produce a razor thin depth of field. This means that if one of
In an ideal world, you always want to shoot at your base ISO (which your actors moves even an inch or two in the wrong direction, your
is your camera’s native sensitivity level), but some cameras have a shot will be out of focus.
very low base ISO (let’s say 200 or 400) which wouldn’t be practical
One of the biggest giveaways of a low-budget production is when all
for shooting in low light. Most cameras today will produce nice
the night footage drifts in and out of focus, as it’s obvious that the
results up to ISO 800 or so, even if they have a base ISO that is
filmmakers were shooting so wide open that they had trouble
significantly lower. So no matter which camera you’re shooting on,
following the action. The best way to remedy this is by shooting from
try to avoid bumping up your ISO too high. Yes, your image is going
farther away so that your actors fall closer to the infinity focus
to be darker than you might like in some circumstances, but the
range.
other tips on this list will help you overcome those issues.
Once you hit infinity focus, everything from that point on will be
2. Invest in Extremely Fast Lenses
perfectly sharp. If you can step back far enough while still keeping
This one should be a no brainer, but it needs to be stated here. Why?
your framing right, you’ll have a much easier time with focus and you
Because so many shooters attempt to shoot in low-light situations
may not need to pull it at all. Alternatively, you could use a wider lens
with slow glass. If you want to keep your ISO at 800 or below, and
that hits infinity at a closer distance than a long lens.
don’t have any additional lighting to help with your exposure, you
absolutely need to let in as much light as possible so that your sensor 4. Choose the Right Location
has something to read. When you’re shooting without lighting (whether during day or
night), you need to spend extra time scouting your locations and
If you don’t already have lenses that are at least an F1.4 (or
prepping for the shoot. You don’t want to just assume that you’ll
preferably even lower), then you will need to go out and get at least
have enough ambient street light in a specific location to give you the
one or two so that you are covered in extreme situations. This is
results that you need. Until you actually go out there with your
especially true if you are shooting on a smaller sensor camera like
camera and see how the light reads, you’ll just be guessing.
the Blackmagic Pocket camera (with its super 16mm sized sensor),
since the sensor size of your camera is directly related to low-light When you take the time to do a proper location scout/tech test and
performance. There are relatively affordable lenses today that can see what you’re working with, you’ll know right then and there

124
whether or not your results will be useable. And if the light isn’t
registering on camera the way that you thought that it would, be
thankful that you caught the issue early and find another location.
Certain streets/blocks are going to be better lit than others, so do
your homework and make sure you know exactly what you’re getting
yourself into.

5. De-Noise in Post
If you followed all of these steps and your footage is still a little bit
noisy or grainy, take your best shot at improving the shot in post.
There are an abundance of post-production tools out there that are
designed to clean up your footage and reduce grain — many of which
are truly remarkable. Neat Video is a great plugin for noise
reduction. Other software like Adobe After Effects or DaVinci
Resolve will have noise reduction tools built right in.

Also – don’t sweat it if you need to de-noise your footage. It doesn’t

mean that you didn’t shoot properly. Some cameras just don’t pick up
certain luminance levels as well as others, so even if you follow all
the right steps you may wind up with some grain.

125
SECTION 18

Shooting With a Shallow Depth of Field

Give your video shots greater dimension! Follow these tips for shooting shallow depth of field.

Shallow depth of field places the focus on one part of your image, lenses are expensive. Instead of spending thousands of dollars on
while other areas in the frame are out of focus. A lot of video wide-aperture zoom lenses, try looking for prime lenses instead.
newbies struggle with creating selective focus in their videos. They tend to give you a much wider aperture at a much lower cost.
Follow these tips to give your video shots shallow DoF. Plus, having a zoom lens isn’t as important with video as it is for still
photography.
Creating Shallow Depth of Field
2. Use a Telephoto Lens
1. Open Up Your Aperture
Telephoto lenses have a much more shallow depth of field than their
The quickest way to get shallow depth of field is to shoot with a wider counterparts. This means, generally, an 85mm lens will have a
wide-aperture lens at a low f-stop number. Unfortunately, these more shallow depth of field than a 50mm lens and so on.

126
3. Create Distance 7. Use a Follow Focus

Simply separating the distance of your subject from the other A follow focus is essentially a small wheel that can manually adjust
elements in your frame will increase background blur considerably. the focus of your lens. When working with shallow depth of field, it
Another consideration would be moving your subject close to your can be really easy to over or undershoot your focus points if you’re
camera. This will give you a psuedo-macro environment and make simply adjusting the focus with your hand. A follow focus will allow
your background much blurrier. you to make very precise changes in your focus.

4. Use a Full-Frame Camera

Full-frame sensors are more capable of producing a shallower depth

of field than a cropped sensor. This is due to the fact that to get a
50mm equivalent image on a APS-C sensor you would need to use a
31mm lens – the wider the lens the less blurry the background.

5. Focus on the Eyes

Audiences are extremely unforgiving if your subject’s eyes are out of

focus. When performing a critical focus, concentrate on the eyes.
This is of course not a hard-and-fast rule, but in most circumstances,
eyes make great focus points.

6. Use a Monitor With Focus Assist

A portable reference monitor is essential if you want to take your

productions to the next level. You need to see your footage in a 8. Use ND Filters
larger format than the small LCD screen on your camera. One key
feature that high-end monitors have over their cheaper As we discussed above, one of the best ways to get a shallow depth
counterparts is the ability to display focusing information. Focus of field is to use a wide aperture. But if you are shooting in a bright
grids make it easier to tell if your subject is in focus or not. When you environment like the outdoors, then you’ll likely have an
have a shallow depth of field, these become even more important. overexposed image that will be unusable. To fix this problem, try
shooting with an ND filter. An ND filter will act like sunglasses for
your camera, cutting down the amount of incoming light. This will
allow you to shoot at wide apertures even in bright sunlight.

127
9. Find Your Marks

If you’re shooting a film with a shallow depth of field, marking your

actor’s marks (and your focus marks!) is incredibly important. Most
follow focuses allow you to write markers with dry erase markers.
However if you aren’t using a follow focus, you’re still fine. You can
use a pencil to mark your focus points on your lens and erase them
afterwards. It can be helpful to label your actor’s marks with gaff
tape.

128
SECTION 19

Five Reasons Why You Should Use a Prime Lens

There are a ton of benefits to shooting with a prime lens. Here are the top five.

To anyone in the photography or filmmaking world, prime lenses bokeh is a quick way to make your images look more interesting to
give you the biggest bang for your buck. There are many benefits to the viewer.
shooting with primes over shooting with kit lenses.
2. Light Gathering
1. Bokeh Better light gathering allows you to shoot in lower light. A larger-
First of all, it’s pronounced Boh-Kuh not Bow-Kay. apertured prime lens has greater light-gathering power than its kit
counterpart. This is huge for photographers because it allows them
Prime lenses tend to have wider apertures than their kit
to shoot at a much faster shutter speed to minimize camera shake.
counterparts. This creates a shallower depth of field and more
This isn’t to be confused with image stabilization, but it is a cheap
background blur. When objects in the background blur out to form
alternative.
large orbs it’s called bokeh. For photographers and filmmakers,

129
3. Quality
Because kit lenses have many moving parts, but still need to be
affordable, they are often very cheap and break easily. Prime lenses,
on the other hand, tend to be more durable than kit lenses.

4. Value
As artists, we need to save money wherever we can, and prime
lenses are a great place to do just that. Instead of spending
thousands of dollars on an expensive zoom lens, try buying a nice
prime set instead. You will get all the benefits of the expensive zoom
lens at a much lower cost.

5. Size
Prime lenses tend to be much smaller than zoom lenses, making
them easier to carry and shoot with. This isn’t a huge problem. But
when you have limited space in your camera bag, every inch counts.

130
SECTION 20

9 Tips for Shooting Cinematic Footage

Looking to give your footage a high-budget cinematic look? Check out these tips.

There’s a lot more that goes into getting a cinematic image than the ideas from your head onto paper so you can share them with the
simply buying the right camera. From pre-production to post, every rest of the crew.
aspect of the filmmaking process works together to create a
Even if you think you have an incredibly clear vision for your film in
beautiful end film. Let’s take a look at a few ways to create beautiful
your head, you will inevitably run into a point on set where your
cinematic footage.
original creative vision is getting a little fuzzy under pressure.
1. Storyboard
Take time to storyboard each shot before you arrive on set. You
Storyboarding is one of the most overlooked yet vital aspects of
don’t have to be the best artist in the world. Just jot down
filmmaking. While you may not be able to storyboard for every
composition notes as best you can.
project (like, say a documentary), you should always be
storyboarding for a narrative film. Storyboarding allows you to get

131
2. Shoot 24fps 5. High Dynamic Range
Almost all modern film is shot in 24 fps, however the default for most Dynamic range refers to your camera’s ability to simultaneously
modern video cameras is 30fps. So if you want to make your footage record both bright and dark areas. To illustrate the point, think about
look more cinematic, you need to be shooting in 24fps. Most modern terrible local news footage. In most of their footage, you’ll likely see
cameras allow you to at least change between 30fps and 24fps. a reporter standing under direct sunlight with a sky that is
completely white. This is incredibly distracting and it will look
If you want to shoot slow-motion footage, you could shoot at even
terrible to an audience in a theater.
higher frame rates like 60fps or 120fps and slow it down to 24fps
when you edit. Back in the day (5 years ago), cameras with high dynamic ranges
were very expensive. But with recent advancements in technology,
3. Shallow Depth of Field notably from Blackmagic Design, you can now get beautifully
There are very few things as noticeably cinematic as a shallow depth balanced images for an affordable price.
of field. If you’re not already familiar with the term, depth of field
refers to the portion of the frame that is in focus. A camera like an 6. Shoot in RAW
iPhone has a very wide depth of field, meaning it’s very hard to get a You’ve probably already heard of a term called codec. Essentially, a
background out of focus. A DSLR-style camera can get an out-of- codec is the way in which your camera packages up your video
focus background very easily. before it gives it to the computer. Some codecs squish your video
files to make them smaller, while others allow for more information
If you’re determined to get the most cinematic footage possible on a
and are subsequently larger in size. However, if you want to get the
budget, you should definitely look into using a DSLR or mirrorless
best image possible, you don’t want to use a codec at all. Instead you
photographic-style camera instead of a camcorder.
should shoot in a format called RAW.
4. Don’t Zoom RAW files are essentially the raw pixel information straight from the
Zooming is great for shooting a high school football game, not so camera to the card. Instead of the camera compressing the video
much for shooting a film. There are very few cases of zooming in image, it will record all of the data to a card. This will result in some
modern cinema. Don’t believe me? Watch your favorite film and look pretty large file sizes, but you will have greater control over the color
for the number of times they zoom. of your video when you jump into your editing software.
Unless you’re watching an Edgar Wright film, it’s unlikely that you’ll 7. Dramatic Lighting
find any zooming shots. Instead filmmakers typically use a technique
Lighting is not as scary as it sounds. While you could certainly spend
called dollying in which they will physically move the entire camera
your entire career trying to understand the subtle nuances
towards the subject. The result is a much more natural movement
associated with cinematic lighting, it doesn’t necessarily take an
that is pleasing to the eye.
expert to create decent lighting. All you really need is a 5-in-1

132
reflector and a cheap LED light. Less is more when it comes to
lighting a cinematic image. With just a few lights, you can create a
beautifully cinematic image.

8. Prime Lenses
If you want to make your footage (and photographs, for that matter)
look 4x better, go out and buy a prime lens. Sure, a prime lens doesn’t
quite give you the flexibility of shooting on a zoom lens, but you
probably won’t be using that zoom feature anyways (remember #4).
Prime lenses tend to be sharper, better in low light, and capable of
producing a more shallow depth of field.

Prime lenses can be incredibly expensive (like in the $100K

range) but they can also be incredibly cheap. At $100, Canon’s 50mm
f/1.8 is a great place to start. If that’s still too much, you can always
convert an old prime lens using an adapter.

9. Color Grade
It can be easy to simply want to export your project once you get
done editing, but if you want your footage to look really cinematic,
you should color correct and grade all of your footage before hitting
that export button. There are people who spend their entire careers
color grading footage, so don’t think this process is easy. Luckily,
there are a lot of really easy resources out there for creating
cinematic color grades very quickly.

Most notably is Magic Bullet from Red Giant. Using their drag and
drop color grading presets, you can very quickly give your footage a
stylized look. If your budget is slim, there are also a lot of good free
color grading presets out there.

133
SECTION 21

Cinematography Tip: How to Create Soft Diffused Light

Soft light is a fantastic resource for any filmmaker. Let’s take a look at ten ways to create soft, diffused light on a film set.

Every great cinematographer has a deep understanding of the way shadows with very sharp edges, whereas soft light will have
light works. Unfortunately, many indie filmmakers focus way too shadows with soft edges or no defined edges at all.
heavily on the gear and not the actual image they’re shooting —
The thing that makes a light either soft or hard is the relative size of
especially when it comes to light. Let’s take a closer look at lighting
the light source. A small source will be much harsher than a larger
and discover a few ways to create a soft, cinematic look.
source. The best example of this is the sky. On a bright and sunny
Hard vs. Soft Lighting day, your shadows will be incredibly sharp because the light source
In film, video, and photography, there are two big categories of light: that hits you (the Sun) is relatively very small in the sky.
hard light and soft light. You can easily figure out if your light source
Now contrast a sunny day with an overcast day. On an overcast day,
is hard or soft by looking at the shadows. Hard lights will have
you no longer have a strong single point in the sky hitting your

134
subject, rather the light is diffused across the entire sky. The result is subject gets bigger, so should the size of your light source (if you
incredibly soft shadows. want soft shadows).

Why Soft Lighting Rules Let’s break down a few ways to get softer light on set.
One type of light source is not better than the other. Both hard and
1. Diffusion Paper
soft lights have their own storytelling purposes in both film and
photography. That being said, soft light is much easier to work with Diffusion paper is a great option if you want to soften your lighting
than hard light. This is for a number of reasons. up just a bit. The “paper” is usually clamped to the barn doors of a
light. The result isn’t dramatic, but it is subtle enough if you’re trying
First, soft light doesn’t draw attention to shadows as much as hard
to soften up the overall look.
light. By nature, our eyes are drawn to points of high contrast. If
you’re using hard lights, your viewer’s eyes may be focusing on Some people use wax paper instead of diffusion paper to get the
points in the frame other than your subject. Soft light helps make same effect. While this may work with LED lights, you shouldn’t use
your subject look as good as possible by minimizing wrinkles and wax paper on a tungsten light as the paper can catch fire.
blemishes, which is incredibly important for commercials and
corporate videos. 2. Softboxes

When shooting with hard light, it’s not uncommon to have to force A softbox is incredibly versatile on set, making it a great key, fill, or
your subject to stay in a very particular place. But when shooting in back light for your subject. The softness of the light produced from a
soft lighting, you typically have more freedom for your subject to softbox depends on the size of the face. In general, larger softboxes
move around the frame. will produce softer light than smaller softboxes.

Diffusion Techniques Be careful when looking for softboxes online. There are a lot of
In a nutshell, diffusion changes the relative size of a light source. For really terrible softbox brands out there that target indie filmmakers.
example, if we were to place a white sheet between your subject and These lights break easily and have horrible color casts. I recommend
a floodlight, we would get much softer shadows than if we simply hit using a simple Lowel softbox kit if you’re just starting out.
the subject directly with the floodlight. 3. Umbrellas
It’s important to emphasize the words “relative size” here. While a
Umbrellas are similar to softboxes in that they are usually attached
softbox may produce soft shadows on a human when five feet away,
to a light source. Depending on the type of umbrella you are using,
it will likely produce sharp shadows on a car. In ideal soft lighting
you can either shoot through the umbrella or bounce light off the
scenarios, there’s a direct relationship between the size of your
umbrella onto your subject.
subject and the recommended size of your source light. As your

135
Some umbrellas are made up of a white cloth and others are made up you’re in a pinch. I often use these diffusion screens when outside in
of a metallic material. Both are good and both can produce soft light direct sunlight.
depending on the material and the distance from the subject.
7. Bounce Light Off the Ceiling or Wall
4. China Balls
If you’re working in a boring office space or home (or if you’ve simply
If you’re looking for incredibly even lighting to add to your scene, a forgotten your softbox) you can always bounce light off of the
china ball is a great place to start. They’re incredibly cheap and the ceiling. This technique essentially turns the entire wall into one big
light they produce is just the right kind of soft. The only downside to soft light. I typically use this technique if I want to light an entire
working with china balls is the fact that they are hard to mount. But room evenly. Just keep in mind you’ll need a powerful light if your
if you’re willing to work with them, they can give you nice soft light room has tall ceilings.
for very little money.
8. Shade
5. Silks/Scrims
If you’re shooting outdoors and looking for soft light, try to find
A silk is typically placed on a separate stand between your subject some shade. Instead of diffusing the light, shade will completely cut
and your light source. Silks can be large (up to 20 ft. x 20 ft.) or small. off the main light source. Instead of being lit from the sun, your
You will normally hear silks referred to by the size of the metal frame subject will be lit by light bouncing off of objects from all around you.
around them. Common sizes include 4×4, 6×6, 8×8, and 12×12.
One thing to look for when shooting in the shade is blown-out
If you’re on an indie budget, you don’t necessarily have to buy a backgrounds. Because your subject will be out of direct sunlight,
“professional” silk to get a similar light effect. Most of the time you there’s a really good chance that your background will be incredibly
can get away with just suspending a white sheet or shower curtain bright. Just keep this in mind when framing up your shot. There’s also
between your subject and the light source. Be sure to bring lots of the chance that your lighting may change while shooting in the
sandbags when using silks. If the wind catches your silk just right, it shade, so it’s best to shoot in the shade if you’re shooting a short
might fall and hurt somebody! scene.

6. 5-in-1 Reflector Diffusion Screen 9. Windows

If you don’t already have a 5-in-1 reflector, stop reading this article Another option for getting soft light is to put your subject near a
and go buy one. There is no lighting tool more essential to indie window. Windows produce incredibly bright and soft light and it’s
cinematographers than a 5-in-1 reflector. The inside of a 5-in-1 is not uncommon for photographers to use this light to their
made up of a light diffusion fabric that can be used to cut light from a advantage. Filmmakers are a little more limited when it comes to
bright light source. They can be mounted to a c-stand or held when window light, as light could possibly change as the day progresses.

136
But if you need soft light quick, a window is a quick and easy way to
do it.

One thing to consider when shooting near a window is color

casts. Lights in your home are typically tungsten balanced (orange)
while sunlight coming through a window is typically daylight
balanced (blue). In order to avoid shooting in mixed lighting, you may
want to invest in a CTO daylight conversion filter to place over your
window.

10. Book Lighting

There’s another popular lighting technique that’s been making its

way through the filmmaking world called book lighting. Book lighting
is essentially a double diffusion technique that always uses at least
one silk. The trick with book lighting is to not have the physical light
source pointed at your subject. Instead your light will bounce from
one source and then hit a silk. The result is a very soft glow. Book
lighting should be used if you want the softest light possible. Keep in
mind: setting this up can take a while.

137
SECTION 22

3 More Creative Practical Lighting Methods

Practical lighting is becoming more common than ever thanks to the low-light abilities of modern digital cinema cameras. Here are a few of the most
effective practical lights that are sure to add character to just about any image.

Many well-known Directors and DPs have turned to practical lights ever as the increased sensitivity of digital cinema cameras allows for
over the years as a means to stylize and enhance their work. practicals to be used in a more powerful way.

In years past, it was relatively uncommon to use practical lighting on Practicals are of course “regular” lights that can organically appear
a film set as a means of achieving proper exposure. In fact, it was in a shot. Examples might include a street light, a desk lamp, or even
much more common to simply use practical lights as a method of a fire. Virtually any light source that’s not a traditional film light can
motivating light that was actually coming from a traditional film be considered a practical light, though some are more effective than
lighting source. Today however, practical lights are more useful than

138
others. Below is a short list of three practical lighting sources, and in your frame, the diffusion won’t likely be noticeable at all,
how to use them most effectively. especially if you’re shooting at a relatively shallow depth of field.

1. Fluorescent Ceiling Fixtures 3. Candles

Many offices, parking garages, and industrial buildings have Ever since Stanley Kubrick used candle light to illuminate Barry
fluorescent ceiling lights, and they can make for some of the most Lyndon, filmmakers everywhere have been trying to emulate that
useful practical light sources out there. The quality of light from look. In Kubrick’s day though, he needed to film on a custom F0.7
these types of ceiling lights is very similar to what you might achieve lens in order to get enough exposure to shoot this way. Filmmakers
with a kino-flo, but of course with the added benefit that they can be today have things much easier.
shown in the frame.
Assuming you’ve got a relatively sensitive low-light camera, chances
Typically when using fluorescent ceiling lights as practicals, it’s best are you can get away with using only candle light if that’s the look
unscrew or remove certain bulbs as a means to shape and control you’re after. That said, you may not want to rely solely on candle
light. Doing so allows for an even textured lighting to fall throughout lighting for your scene, as that can cause other headaches on set.
the scene, giving the actors a lot of wiggle room to move freely
An alternative option would be to use a small space light to bring up
during their performance.
the ambience in the room, and then use candles to shape the rest of
In addition to their quality of light, fluorescents also look fantastic on the light in the scene. The quality of light and natural flicker effect
camera. Low angle shots that reveal the ceiling will look great as the from real candles simply can’t be replicated perfectly with any other
fluorescent tubes glow in the background and add depth to the shot. tool on set or in the color suite.

2. Car Headlights
Headlights are extremely powerful light sources and can be hugely
useful in a wide variety of shooting scenarios. A great way to use
them is to backlight actors with them, and then use a bounce to push
some fill light back onto their faces.

They can also be used as a key light, but remember that if the car isn’t
in your frame, you’ll at the very least want to establish it in a master
shot. Otherwise the extremely bright lights will look out of place and
may disorient the viewer.

Also, don’t be afraid to add diffusion to your car headlights to soften

them and bring down the overall light levels. Even if the lights appear

139
SECTION 23

How to Creatively Use a Reflector on Location

Utilize these tips to creatively use a reflector on location to capture the right lighting for your next production.

On every major production set, cinematographers and need. Let’s look at ways to take advantage of this light by learning
videographers utilize reflectors to help enhance or dilute light. The how to creatively use a reflector on location.
same creative practices that these large-scale productions use can
be replicated by you using a standard collapsable reflector or As a Key Light
reflector panel that won’t kill your budget. A key light is your most crucial light. It clearly highlights the form of
your character. Now, if you find yourself on location with nothing
There will be times when you’re on location and you only have but natural light, you can use a reflector to generate the key. What
natural light around you to work with. Or there will be instances you’ll want to do is place your talent with their backs to the sun. You
where you have lights available, but their output is more than you can now use the reflector to bounce the sunlight onto their face,
thus creating a key light.

140
Utilize It as a Diffuser A Kaleidoscope of Color
Sometimes when filming you’ll find that you might have too much What if you need a variation of color that moves in the lighting of
light. In this case you’ll want to diffuse that light so your character your shot? You can use a reflector for that too by attaching color gels
isn’t harshly lit. to the surface of the reflector and bouncing the light from the sun or
a light onto the subject. This could be used in situations where the
If you’re working on location using natural light, then you can use the
lighting calls for a need of multiple colors, such as simulating the
translucent side of your 5-in-1 reflector and place it between your
flicker of fire on a character’s face.
character and the sun to diffuse it. This will cast a nice smooth light
across your character versus a harsh light.

Adding Shadow or Negative Fill

Another way to use a reflector creatively is to use it as a shader.
There have been countless times on various sets where the natural
light is great, especially later in the day, and your character is getting
a great key light on the side of their face. But then you notice that
there is a reflective light on the other side of the face and you would
like that to be darkened with a shadow.

For this you’ll want to use the black-facing side of the reflector and
situate it between your character and the reflective light source.
Once this is done, you should see that your character has a nice even
shadow opposite of the key light.

Create Rim Light

Rim light is almost as crucial as the key light. It’s used to separate the
character or subject from the background, giving your shot depth. In
order to get this type of lighting with a reflector, take a 300k light,
point it straight up, and use the reflector at an angle to bounce that
light onto the subject. The light is now diffused enough that it
doesn’t create a sharp edge light and it backlights the subject in an
even manner.

141
SECTION 24

Essential Gear for Product Videos

Shooting a professional product video is surprisingly easy — if you have the right gear. Here’s everything you need.

While many professional videographers shoot product videos in • diffusing light

super boring and ugly rooms, you don’t want your finished video to
• reflecting light
look anything short of perfect. Let’s take a look at some of the most
important gear to bring to any product video shoot. • flagging light
1. Reflectors • absorbing light
The most important item to have on a product video shoot is a 5-
in-1 reflector. Reflectors serve as multi-tools on set because they • makeshift backgrounds
can do a number of different jobs, including: Reflectors allow you to shape the way your product looks on
camera. There are a lot of DIY reflector tutorials out there, but all of

142
them are impractical. Reflectors are inexpensive enough (around 5. Tripod
$15) that there’s really nothing to prevent you from buying your The importance of a good tripod can’t be overstated. While you’ll
own. typically find the best luck with a fluid head tripod, you don’t have to
spend hundreds of dollars to get a decent set of sticks. There are a
2. C-Stands
lot of good, affordable tripod options out there, if you just take the
C-Stands are especially important when shooting product videos.
time to do your homework. One of my favorite brands is Magnus.
Even more than most commercial work, a product video will require
While their tripods will only last about three to five years, they are
subtle changes in lighting; you might need to add
super smooth, especially when you consider that they’re friction
additional reflectors or even a backlight to your subject. Between
head.
holding up the background, lights, and reflectors, it’s not uncommon
to need six or more C-Stands on a product video shoot. Make sure 6. External Monitor
you have plenty when you arrive on set. Details are everything in filmmaking and video production. This is
especially true for product videos. On a narrative set, you might be
3. Soft Box
able to get by with a focus that’s slightly off. But if your focus is even
There’s a time and a place for harsh lighting. Product videos are not
a little off on a product video shoot, you’re going to have to reshoot.
the time nor the place. If you do a lot of product photography,
This is why an external monitor is super important. An external
owning a soft box is a must. A soft box makes it a lot easier for you to
monitor will allow you to see your finished footage the way your
light your scene; it will soften shadows, eliminating visual
audience will see it. Good external recorders will allow you to see
distractions. One way to approach product lighting is place two soft
your focus points and find any overexposed areas.
boxes around your subject (one to the left. one to the right) and then
add in smaller lights to stylize the scene. 7. Backgrounds: Paper > Cloth
Nine times out of ten, your background for a product video will be
4. Macro Lens
either solid white or solid black. Normally when you’re shooting a
A macro lens has a very short minimum focus distance that allows
video with a solid background, you want any distracting background
you to get really close to your subject. As you can imagine, this is
creases or wrinkles to be minimized. This is especially important for
imperative if you are shooting a product video. The most popular
product videos. Any distracting background blemishes will distract
macro lens on the market is a 100mm f/2.8. This lens, found across
the viewers from the actual product being featured.
multiple brands, is perfect for shooting small objects.
It is recommended to use rolls of paper rather than cloth when
While not technically a macro lens, if your subject is a little larger
working with solid backgrounds. Paper rolls are consistently smooth
you should use a 50mm prime. This will allow you to get wide and not
and solid, perfect for product videos. Plus, if you accidentally stain
distort your subject in the camera. And, frankly… you really should
the paper, you can just cut it off and roll out some more.
have a 50mm prime in your lens bag anyways.

143
Fun Fact: If you want your product videos to have a little reflectivity, place comes into play. When coupled with a decent rotating head, a slider
a solid piece of glass down over your table top. can add a lot of visual interest to an otherwise boring video.

8. Gaff Tape 11. Wood Panels (Fake Wood Table)

Okay, so maybe gaff tape doesn’t necessarily fall into the ‘gear’ Typically when you see product videos with ‘hipster’ table tops, the
category, but it’s still an incredibly useful tool on any film or video table top isn’t actually real. It’s typically a wooden panel that’s been
set. Gaff tape, as you can imagine, can serve many different roles on put together to simulate a real table. This helps with storage space
set. It can hold down loose background pieces, keep your products and allows you to light the scene more easily.
steady, set actor marks, hold reflectors steady, and much more.
All you really need to do is get a few pieces of plywood and an
While you will have to fork over a little extra cash to get gaff tape assortment of wood stain. Simply stain one side one color and the
over other kinds of tape, it’s absolutely worth it. Gaff tape doesn’t other side another color. Now you have two different table tops
leave residue behind. without having to store two different tables. Of course, this method
doesn’t work if you need the actual table legs in the shot. But for
9. Lazy Susan most shooting scenarios, this set up will work great.
If you’ve ever eaten at a fancy Chinese restaurant, then you probably
have experience with a Lazy Susan. In a nutshell, a Lazy Susan is a
small tabletop that spins in circles. If your product photography
requires you to shoot all 360 degrees of the featured product, this is
a must — especially because you can’t move your camera all the way
around your subject without getting lights and crew members in the
shot.

All you really need to do is place a piece of solid-colored poster

board over a Lazy Susan, tape it down, and then have a crew member
(or yourself) give it a spin. It’s actually pretty easy to use and the
results look fantastic.

10. Slider
Good product commercials have one thing in common: movement. It
doesn’t matter how good your lighting is, if the footage is boring,
nobody is going to want to watch it. The slightest movements will go
a long way when shootingproduct videos. This is where a slider

144
SECTION 25

Three Tips For Lighting Product Shots On A White Backdrop

Shooting product shots on a seamless white backdrop calls for a very specific approach to lighting. Here are some tips on how to get it right next time
you’re in the studio.

Many cinematographers and shooters mistakenly assume that are some universal principles that come into play when shooting
shooting product shots is simple. They often feel that, because just about any type of product.
they’re effectively shooting a still object, they’ll be able to get good
If you regularly shoot commercial content, there’s a very good
results with their eyes closed — even if they have little or no
chance at some point you’re going to need to step up to the plate
experience in that realm.
and deliver clean product shots. Here are some crucial lighting tips
The reality, of course, is that lighting product shots is as complex as to take into account when you get there.
anything else. Each product will have its own unique challenges and
needs to be approached as its own entity. At the same time, there

145
1. Always Use Soft Lighting 3. Know When to Backlight
Commercial and product photography is all about beauty, and we all There are many scenarios where a backlight isn’t necessary when
know that soft light is far more conducive to a beauty shot than hard shooting products on a white seamless, but in some cases a backlight
light. This is true across the board, whether you’re shooting products can actually be very helpful. For instance, if you’re shooting a light-
or talent. colored product against white (or a transparent/clear product) and
needs it to stand out more obviously, backlighting is a great solution.
While there may be some exceptions to this rule (depending on the
type of product you’re shooting), you’re almost always better off That said, you need to be careful with how and where you place your
using soft light sources. This will not only help you get more pleasing backlight to maintain the consistency of a polished, neutral look. A
results on the product itself, but will also help you control the spill on singular backlight placed above and behind the product is usually an
the white background, which can save you a lot of time on set. optimal location, as placing your backlight off to one side or another
might throw off the symmetry.
2. Use Flat Lighting if Necessary
If you come from a cinematic background, you probably have it
drilled into your head that you should never light a scene so that it
appears flat. Film is all about finding pockets of light and shadows to
add dramatic effect, and flat lighting of course does the exact
opposite of that.

With products however, you generally aren’t trying to dramatize

anything. You’re almost always trying to capture the most realistic
and neutral version of the product that you can, and in order to
achieve that end result, flat lighting may be critical.

I typically recommend lighting your product shots very evenly with

one source directly in front or overhead(depending on your product)
and two additional sources — one on each side of your background.
This will help you to not only achieve a very flat look, but also will
help you to avoid shadows, which can become problematic when
working with certain types of material.

146
147
SECTION 1

Five Tips for Planning Your Audio in Pre-Production

Capturing great audio begins before hitting ‘record’.

Having low-quality audio in your film or video is a quick way to lose important to develop an ear. Keep the acoustics of your location in
credibility in the eyes of your audience. Instead of simply taking mind. Does your voice echo loudly in the room? Is it in a highly-
audio into consideration once you get on set, you should prepare to populated area? Along with the room acoustics, you need to be able
make your audio amazing before production even begins. Let’s take to control other audio related factors like the air-conditioner or a
a look at five ways you can plan out your audio approach during pre- humming refrigerator.
production.
What ambient noises can you anticipate? If you’re shooting in a
1. Go Scouting large building, you might not be able to turn off the air conditioner
Location scouting is one of the most important aspects of the pre- using a thermostat on a wall. For this reason, it’s important to have a
production process. As a filmmaker, you’ve probably already location contact that can help answer your location-related
developed an eye for finding good locations, but it’s equally questions.

148
You should also be mindful of things like proximity to airports, fire In order to do this, you’ll need to have your audio person involved in
stations, and bus routes, as these things might not be heard during the pre-production process. This admittedly adds another layer of
location scouting but can definitely be picked up by your complexity to the whole process, but it definitely pays off in the end.
microphones. It’s also important to look around and see if there are
any construction projects going on; construction noise is a setback 3. Invest
that can be disastrous for location sound. You don’t want to be Indie productions are notorious for having incredibly bad audio. It
surprised by ambient noises once you get on set. doesn’t matter if your image is immaculate… if the audio is bad your
audience isn’t buying it. If you’re serious about your project, it’s
2. What Does the Shot Demand? important to invest in quality audio equipment.

Online rental houses like BorrowLenses, LensRentals.com, and

LensProtoGo all offer microphone and audio gear at affordable
prices. If you’re needing the equipment for an extended period of
time, inquire about a discount.

Good audio investments don’t end once the shoot is wrapped. It’s
equally important to invest in your audio during post-production.
Instead of using low-quality music, spending a fortune for original
composition, or using copyrighted commercial tracks (which could
Top-notch wardrobe has the ability to add a greater sense of put you in legal hot water), consider high quality production music.
believability to your film, but when picking your character’s clothing
4. Hire a Professional Boom Operator/Sound Mixer
it’s important to consider audio. For example, silk clothing is
Sites like Mandy.com and ProductionHub are great resources for
notorious for being difficult to mic, so you might consider using a
locating audio specialists in your area. This is a key crew member, so
boom mic instead of a lavalier. You may even want to change the
don’t fall for letting a friend or family member be your on-set audio
wardrobe to accommodate.
person. Filmmakers and video pros often get caught up in the visuals
It’s also important to think about the action in your scene before you of the production and the audio takes a back seat.
arrive on set. Will the actors be walking and talking? If so, will their
Capturing audio on set is more than just holding a boom pole.
backs be to the camera while they’re talking? How much are they
Professional sound recordists will have experience using field
going to move? Asking these questions before shooting may also
mixers, know the proper ways to mic talent, and can work in tandem
speed up your production time. Instead of showing up on set and
with the director of photography.
deciding what mics to use, make an educated decision before you
arrive.

149
5. Make a Plan
Making a detailed plan is imperative for streamlining the production
process. If you are creating storyboards before you shoot (which
you should be) take the audio into consideration during this process.
The audio recorder and video editor will be appreciative when you
hand them a detailed storyboard with audio notes. Always schedule
time to record natural sound while you’re on location.

Picking up several minutes of natural sound from every location is

important for preventing choppy audio in post. Be sure to record
additional natural sound every time the audio environment changes
(for instance, if an A/C unit kicks on). This is really important for
preventing choppy audio in post.

150
SECTION 2

How to Capture High Quality Audio for Low Budget Films

Reducing background buzz and hum when recording location sound can be a challenge! Follow these three simple tips to get cleaner location sound on
your next shoot.

Want to drive yourself crazy? Try removing audio buzz or hum Three common sources of on-location background buzz and hum
during video editing. Isolating bad audio frequencies without are:
distorting dialogue or intentional on-camera sound can be a
• Heating, Ventilation, and Air Conditioning Systems
frustrating challenge.
• Lighting
It’s always best to get the cleanest on-location sound instead of • Refrigerators
attempting a post-production fix. You’ll save yourself time at the
end of your project and will likely have a better sounding product. The following on-location sound tips will address each of these
problem sources and how to minimize their effect on your audio.

151
Play Weatherman refrigerator can stay cool for a while… but you don’t want to forget
A/C units may be the #1 culprit for picking up bad background audio. to turn it back on!
They rumble, hum, and can really muddy up an audio track. To top it
How can you make sure you remember to turn it back on? By placing
off, they’re erratic, turning on and off at random intervals (leading to
your keys in the refrigerator when you unplug it. There’s no quicker
irksome shot inconsistencies). The only way to ensure that you don’t
way to get banned from a location than to leave behind a
get A/C hum is to kill the system while you’re shooting. Of course,
refrigerator full of spoiled food!
nobody likes burning up under hot production lighting.

Luckily, there’s a trick that will help keep your crew cool. As soon as
you arrive on set, radically adjust the heater or A/C unit. Let the unit
overcompensate. If it’s hot out, turn the air conditioner on blast.
Freeze the room. In cold weather do the opposite. Then, when you’re
ready to start rolling, turn off the unit.

Blankets and a Step Stool

What about the times when you can’t control the A/C unit? Big office
buildings are notorious for this.

Don’t worry. There’s a trick for this situation, too. You can soften the
A/C unit hum by covering up vents with blankets. Professional
sound blankets are ideal, but if you’re on a budget or in a pinch, even
your standard blanket or comforter could be a satisfactory
replacement. The step stool allows you to access high or hard-to-
reach vents.

If you have buzzy ballasts from location lighting, obviously the first
line of attack is to turn them off. Lighting that stays on all the time
(such as emergency lighting) may require you to physically remove
the bulb while shooting. The step stool also aids with this.

Freeze the Keys

Refrigerators can’t be easily moved out of a location, so it’s best just
to turn the power off while rolling on set. With the door shut, a

152
SECTION 3

Audio Tips for DSLR Filmmakers

Treating audio as an afterthought is a huge mistake. Up your sound game with these audio tips for DSLR filmmakers!

Although many filmmakers know just how critical great audio is to absolutely must be dealt with in order to achieve any sort of success
the success of a film project, it’s still one of the most overlooked with a film project.
aspects of the filmmaking process. This is unfortunate, as poor
So for those of you DSLR filmmakers out there who are looking to
sound quality can hinder all of the other elements that we work so
up your game with regards to audio, here are a few key tips to get
tirelessly on. In the end, nothing else matters if the sound quality is
you started.
poor.

Whether it be distracting background noises that have been picked Don’t Rely on Your DSLR
up (such as wind or cars passing by), or poorly recorded dialogue, First and foremost, remember that there’s no correlation between
these issues greatly affect the overall viewing experience and your camera’s ability to capture a great image and its ability to
record great audio.

153
DSLRs are not designed to capture professional quality audio, no Always Record Room Tone
matter how many manual controls or functions they may have. The For those unfamiliar with the term, “room tone” is essentially the
internal limitations of your DSLR can never be compensated for by ambient sound of a room. Room tone is always recorded on
using better external devices (such as a high quality shotgun mic), as professional sets so that the audio editor has scene-specific
the camera’s limitations will always be the bottleneck as far as sound background noise to work with if they need to patch over any sound
quality goes. issues in their ProTools session.
Your DSLR may have manual control over levels or a headphone jack, Location audio professionals will typically record room tone for
but that doesn’t mean it’s going to record great audio. It simply every single location they are covering in order to pick up the
means that it’s somewhat competent at recording audio in a pinch or general hum and subtle noises present in every room. For example, if
can be used to record reference audio. Always use an external device you were to record room tone in a ‘silent’ kitchen, you would
(whether it be as simple as a Zoom H6, or a more complex mixer/ inevitably pick up the sound of the refrigerator buzzing, maybe a
recorder) in order to achieve professional-level sound. door creaking in the background, a slight hum from the lights on in
the room, etc.
Scout Locations
Do your field research! This is by far the cheapest available method Room tone is usually recorded at the end of every scene for 30-60
for achieving great sound. It costs you absolutely nothing to devote a seconds while the entire cast and crew stands silently or after
few days during pre-production to go to your various locations and they’ve cleared the room. Why is this important to your sound
do some audio tests. You might feel this isn’t necessary, but when quality as a whole? As touched on earlier, you typically use room
you get to set and realize that you’re shooting in the middle of a tone in post to help blend together multiple takes of audio so that
flight path, you’re going to wish you scouted that location properly. there’s a consistent bed of sound that seamlessly melds together all
of the dialogue and ADR tracks.
The scout itself can be very simple. Just go to your location at
approximately the same time of day that you’re going to shoot and You can also use room tone to match ambient sounds when you
start looking for red flags. If you’re shooting on a rooftop, make sure shoot multiple takes of the same scene and there are differences in
the wind isn’t out of control. If you’re in a field, be aware of the the background noise. For example, if in one take the air conditioner
background noise created by crickets, birds, and other wildlife. If goes on and in another it turns off, you will want to use room tone (of
possible, bring your sound recordist with you and actually do tests the air conditioner on) to keep the sound of it present in the entire
with your equipment to see what noises you’re picking up. scene.

Doing this costs you nothing but a bit of time upfront, and it could Final Thoughts
potentially save you a ton of time and headaches both on set and in For top-tier production value when making a film, it’s vital that you
the ProTools suite. pay as much attention to your film’s audio needs as you do its visual

154
needs. If you can be one of the few micro-budget filmmakers that
actually prioritizes sound, you will certainly reap the benefits of
going the extra mile.

Pristine sound adds another dimension to your film and ups the
production value in ways that the camera will never be able to.
Understanding your camera’s capabilities, doing sound tests in each
of your locations, and recording room tone for every scene are three
of the simplest things you can do to vastly improve your film’s sound
quality.

155
SECTION 4

How to Pick the Perfect Music for Your Video Projects

Sound shouldn’t be overlooked! Discover how to choose the best music for your video projects.

Finding the right music for your video project can be a challenging 2. Utilize the music in your editing pace. Cut to the music to drive
process – especially when a client is involved! Follow these tips to energy while cutting against it to create tension. Make thoughtful
find the perfect music for your video projects. choices about how you use music within your video edit.

Define the Music Early 3. Stay within budget. Nobody likes production surprises…
This is important: look for your music before you finalize an edit! especially when it comes to money. Licensing music early could
You’ll be one step ahead if you determine your music choices early curtail the chances of a budget issue later.
on in the production process. Planning ahead will allow you to:
Some editors prefer to create a very rough cut of an edit and try
1. Get your client’s music approval early on. The last thing you want different music tracks underneath to see which might work best.
is to finalize an edit and have a client come back and ask for a music Once a track is decided upon, they can clean up the edit to match
change.

156
the music. It’s a useful approach, but must be done early on in the Vocals or No Vocals?
post-production process. Montages often use tracks with vocals… and in most cases it may be
best left at that. Vocals under dialogue or an interview can be
Set the Tone
distracting and off-putting. If you choose a vocal track for your
This is an easy one: The tone of your video will typically dictate the
project, you have another matter to consider: Do the words support
style/mood of the music tracks that make the cut. Unless you’re
what’s happening in the scene? Good non-vocal tracks can convey
intentionally trying to use music to play against the action (like a
the same emotions without words and are usually a safer bet.
classical track under a fight scene), it’s best to find a track that
enhances the feeling of your scene. Consider your target viewer… Avoid the Duration Traps
what’s their age and background? Whereas a corporate executive Don’t be tied to the duration of your music! Instead, cut it up to work
may not identify with hard rock or hip-hop, this may be a perfect best with your video. The typical cadence of a commercial song
style choice for a younger audience. (verse, chorus, bridge) may not flow with your edit.
Royalty free music libraries like PremiumBeat give you the option to Instead, loop parts of the track in your editing app, bringing in a
search by mood or genre, making it easy to find tracks that evoke a chorus or emotional climax at just the right time. Cut them together
certain emotional response. will the full track version to tailor the audio to your visuals.
Music Throughout or Bookends? Real Instruments
Depending on the type of video project, you may find that music
simply isn’t needed throughout. Montages and demo reels typically
dictate end to end music, but a corporate video or film may actually
benefit from sporadic music or a bookended approach.

In many cases, music can actually be more powerful when it is used

intermittently; it can better accentuate a point or climax in the
video. If music is forced throughout, the viewer may get fatigued.
Allow for some breathing room and don’t forget to let the
environmental and background sound help shape the audio of your
project.

If you’re going with a bookended approach, it may be a good idea to Beware of music that uses MIDI or digitized instruments and effects.
pick one music track (or theme) to open and close the video – These tracks may sound corny and cheap. Instead, ensure that the
especially on shorter video projects. tracks you’re using feature real, organic instrumentation. To the
trained ear (and even the untrained!) a highly processed digital

157
keyboard often doesn’t hold a candle to the organic sound of a baby
grand piano.

Additionally, the right instrumentation can contribute to the

message of your video. As an example, regional music can be
effective in creating the feeling of a certain locale. For instance,
traditional Asian or African music may be well-suited if you’re
profiling such a location in your project.

Music Library vs. Original Composer

Depending on the scope your project, you may be considering either
using tracks from a royalty free music library or hiring an original
composer to score your video. Budget is the biggest consideration
here – original composition doesn’t come cheap. Additionally, having
a composer score your project is a time and labor intensive process.

Royalty free music provides a low-cost, high-quality alternative.

Whatever you do, avoid using copyright or commercial tracks in your

video projects. Despite your client’s insistence, using a Coldplay
track in your video is cost-prohibitive to license and can put you in
legal hot water!

As a last point, pick your music with intention and make it an

important part of the process. The perfect track has the ability to
drive your editing decisions, engage your viewer, and enhance all the
feelings of your video project.

158
SECTION 5

6 Microphone Pickup Patterns You Should Know

Don’t pick the wrong mic! Find out when to use certain microphones by learning these six essential microphone pickup patterns.

A film is only as good as its audio. While it can be easy to get

captivated by the visual side of a film, audio should be high on the
priority list of any director or producer. Bad audio can quickly turn
off an already distracted audience, so it’s important to pick the right
mic for the job. Let’s take a look at six essential microphone pickup
patterns that every filmmaker should know.

There is no one-size-fits-all solution when recording audio on a film

set. You will likely want to bring a good assortment of lavs and
shotgun mics to accommodate different shooting scenarios on set.

159
1. Omnidirectional 2. Cardioid

Perfect for: documentary recording, weddings, events

A cardioid pickup pattern is a highly flexible pickup pattern that is

Perfect for: interviews, moving subjects
great for all-purpose use. Cardioid microphones come in all shapes
Omnidirectional mics are the easiest to understand. Simply put, and sizes. A cardioid mic, while slightly directional, should not be
omnidirectional mics record audio from every direction. Typically confused with a hypercardioid or supercardioid mic. Cardioid mics
you will want to use an omnidirectional mic when recording audio will still pickup background noise if they are not in a controlled
that you can’t control very well (like ambience, a press conference, or environment.
a moving talking head). Omnidirectional mics are the most flexible
mics, but they are also the noisiest. It’s certainly a balancing act
when on set. In a filmmaking context, you will almost exclusively see
omnidirectional pickup patterns in lav mics.

160
3. Hypercardioid (Mini-Shotguns) 4. Supercardioid (Shotgun)

Perfect for: reality television, scripted content

Perfect for: on-camera mics, documentary recording, and
instrument recording Supercardioid mics are the most popular types of microphones for
indie filmmakers because they give users the ability to isolate audio
A hypercardioid pickup pattern is a directional pickup pattern that is
while still allowing for a slight margin of error. Supercardioid pickup
great for isolating audio. While you may find some lav mics with
patterns are typically only found in shotgun mics which are used on
hypercardioid pickup patterns, you’ll typically only see this pickup
boom poles or mounted to the top of a camera. It should be noted
pattern in shotgun mics. While every brand is different, the biggest
that a supercardioid pickup pattern does pickup some audio from
difference between a hypercardioid mic and a supercardioid mic is
behind the microphone. So if you mount a supercardioid mic to your
how much of the rear and side noise is picked up. Hypercardioid mics
camera, you’ll need to keep your operating noise to a minimum.
are typically used for instrument recording.

161
5. Lobar (Unidirectional) 6. Bidirectional (Figure 8 Pattern)

Perfect for: narrative film, controlled sets

Perfect for: podcasts, radio interviews
While there is technically no such thing as a true unidirectional mic,
a lobar pattern is the most directional pickup pattern you can A bidirectional microphone is a mic designed to pickup audio equally
use. While it may be appealing to a filmmaker to get a microphone from the front and back of the mic. Typically, bidirectional
with a lobar pickup pattern, you should seriously consider how microphones are used for radio interview recording or podcasting.
difficult it will be to use a lobar microphone. You will probably not find much use for a bidirectional microphone
on a film set, but they can sometimes be used as a backup mic for talk
The only microphone that can have a lobar pickup pattern is a
shows when placed on the hosts desk.
shotgun mic, so you’ll almost always need someone to assist you
when operating a microphone with a lobar pickup pattern. If
your boom pole is typically operated by a careless PA, you might
want to opt for a supercardioid mic instead, as the pickup pattern
will be more forgiving.

162
163
SECTION 1

How to Direct Scenes Containing Minimal Dialogue

\

Master one of a film director’s most important skills: Directing scenes that contain minimal dialogue.

It may sound like a cliche, but the old adage of “Show, Don’t Tell” is not only in the more textural moments in your film, but also in the
as relevant today as ever. As filmmakers, most of us understand the verbal moments too. When visual cues, metaphors, and powerful
notion that film is a visual medium and therefore the best stories are imagery work together – the end product can really shine.
often told by tapping into powerful visuals. However, many
filmmakers fail to actually put this ideology into practice and their 1. Imagine your Scenes as Dialogue.
films run the risk of lacking depth. A huge challenge for many filmmakers is conceptualizing and
writing material without a lot of dialogue. More often than not, the
There are countless incredible films that have an abundance of dialogue-free scenes in films end up being nothing more than
dialogue, and the style or genre that you like to work in may call for transitional moments with very little inherent value unto
more heavy dialogue scenes. Regardless, knowing how to direct themselves, with the exception of helping to glue together other
scenes with minimal dialogue will inevitably improve your results pieces in the film.

164
The mistake that many filmmakers are prone to making is not metaphorical meanings that ideally are subtle enough to hit the
conceptualizing their dialogue-free scene in the same way they viewer on a subtextual level.
would a verbally driven scene.
It’s amazing how powerful subtext is to the average viewer, and
It’s a good exercise for filmmakers to imagine dialogue in a scene many dialogue-free scenes that make use of symbolic or
that doesn’t have any and then ask themselves a few questions: metaphorical imagery are able to convey far more to the audience
What do I want to tell the audience? How does this move the story than any amount of dialogue would be able to. Always look for ways
forward? What new character info do we get from this? Basically, ask to add meaning to your scenes through the use of objects, colors,
the same kind of questions you would consider when writing a wardrobe, props, or any other vehicle that may allow you to do so.
dialogue scene. Once these questions have been answered, coming
up with concepts for visuals that can illustrate them becomes much 4. Break Up Important Moments.
easier. Another big trap that filmmakers tend to fall into is trying to cram
too much information into a single nonverbal moment. For example,
You’re no longer just thinking about arbitrary images, but rather the filmmaker might want to convey a detail about one of their
meaningful information in a visual format. characters.
2. Don’t Overdo Coverage Let’s say that the character is a recovering alcoholic that relapses.
In film, a lot of the time less is more. This notion applies very The filmmaker might decide to create one long visual scene that
obviously to shooting films without a lot of dialogue, yet this is one somehow shows the character being tempted by alcohol and then
area where many filmmakers go very wrong. giving in. But placing too much information in one scene like this can
feel very cheesy and soap-opera like in many ways. The better option
Inexperienced directors will often feel like they need to build up a
is to break up the moment and tell it in two or three pieces.
certain moment and overcompensate for the fact that it has no
dialogue by over-covering the scene. They will get a dozen angles By planting seeds for the audience and leaving “breadcrumbs,” your
that they don’t really need and actually prevent the viewer from viewers will be led to their own conclusions about your story and
focusing on some of the important visual cues in the scene. characters — and that will give your film a deeper meaning to them.
In the example above, if you were to show a few moments leading up
3. Find Symbolism. to the character starting to drink again (let’s say, having wine spilled
Every shot that you show in your film needs to be important and on them, watching their boss drink in front of them, etc.), you are
relevant to your story or characters or both. While it may be able to nudge the audience to the conclusion you want them to draw
relatively simple and straightforward to direct a dialogue-free scene without being too forceful.
that’s simply progressing the story, it’s more difficult to execute well
on the character level. In order to really tap into something
emotionally powerful, your visuals need to have symbolic and

165
5. Show More Character
When in doubt, always focus on your character development when
working with nonverbal material. The most interesting and dynamic
character information can be portrayed best in scenes without
dialogue, so always take advantage of this fact.

Ask yourself what you can show your audience in this dialogue-free
scene, moment, or film that you wouldn’t otherwise be able to in a
scene with other characters. Maybe you choose to show your main
character alone and give insight into who they are behind closed
doors. Whatever choice you make will work, as long as it’s centered
around conveying character detail in an interesting and visually
motivated way.

166
SECTION 2

Tips for Being an Awesome Production Coordinator

To succeed as a production coordinator, you need the patience of a director, the organizational skills of an assistant director, and the knowledge of a
producer. No problem, right?

Thriving under pressure, being able to multitask, and playing well think you’re up for the challenge (or already work in this demanding
with others are just a few of the necessary skills you need to position), these tips will make your life easier both on the set and off.
succeed as a production coordinator.
1. Communicate Impeccably and Lead Your Team
It’s a demanding job and certainly not a perfect fit for everyone. But Communication and the ability to take charge and lead are the most
for those that work well in this type of environment and are heavily critical qualities for you to have as a PC. Throughout every phase of
self-motivated, working as a production coordinator can be an the filmmaking process (and especially during pre-production and
excellent career move. production), you are the point of contact for most of the crew - and
that is a massive responsibility to have.
It’s the natural progression away from PA-ing and into AD-ing, and
eventually into producing. If you’re considering a career move and

167
 the production thousands of dollars in overtime or reshooting
expenses.

Having likely come from a PA background, you may be accustomed There are an infinite amount of issues that could arise as a result of
to feeling like you should simply do your job, stay quiet, and get out poor organizational skills, so always be sure to stay detail oriented
of the way. This mentality needs to change drastically as you step and triple check everything you do before sending it out to the team
into this new position, as your role is now more in line with that of a – otherwise you could be out of a job.
producer than it is a production assistant. And just like a great 3. Know your Role
producer – communication and leadership are key.
A production team is naturally set up as a hierarchy, and it’s crucial
2. Stay Organized and Stay Ahead that you know exactly where you stand in the chain of command.
Your ability to organize and stay a step ahead of things is what you Although I mentioned earlier that being a production coordinator in
were hired for above all else, so make sure to prioritize these aspects many ways is like being a producer, you still need to make sure those
of your job. It’s often assumed that producers do most of the dirty lines aren’t blurred. Many production coordinators make the mistake
work on and off set, but in reality it’s often the production of overstepping their boundaries during production as they grow to
coordinators doing a lot of the heavy lifting – even if they aren’t realize their importance on set.
getting credit for it. As production coordinator, you report directly to the production
The bottom line: organization is key. Even the slightest manager, while also taking the lead on overseeing the production
organizational misstep can lead to disaster during production. If assistants and assistant production coordinators. For those of you
you’re filling out the call sheet, a single typo that places a talent’s call that have already worked in this capacity, you understand that
time later than it should be could ruin an entire day on set — and cost

168
there’s a lot of juggling involved to do this well, and you are often This can sound like a difficult position to fill, and truthfully it is a big
required to wear many hats. challenge for many. But if you’re willing to stick with it and make
yourself a productive member of the team, things start getting easier
There are times when you need to take on roles that are outside of
very quickly.
your usual production coordinator responsibilities, and that is
perfectly okay — as long as you are being guided to do so. In other
words, if you need to handle something that the production manager
is passing off to you, that’s great – just don’t overstep your
boundaries and do it before it’s asked of you or it will reflect very
poorly on your set etiquette.

Final Thoughts

Not everyone is cut out for the role of production coordinator. It is a

demanding, high-pressure job that requires a very particular set of
skills, namely the ability to execute tasks with just the right balance
of patience and tenacity. Over and above a concrete knowledge of
film production from A to Z, you must be a great communicator and
leader, remain ahead of schedule and completely organized at all
times, and understand the boundaries of the role in which you work.

169
SECTION 3

Honing Your Craft: Find Your Voice as a Director

A big issue that plagues some indie filmmakers is their lack of identity. Many independent films can end up feeling like a parody of someone else’s work,
ultimately leading them to be flops both commercially and critically.

If you watch enough movies, you should be able to tell the work of While it might take a long time to get where you want to go
Aronofsky from Spielberg simply based on their directorial style and creatively, in this section we’ll explore three powerful steps you can
the trademarks that they leave on each scene. take to find your voice as a director.

These are filmmakers that spent decades honing their craft and 1. Watch More Movies
understanding what they wanted to say and how they wanted to say One of the biggest red flags of a director that hasn’t found their own
it. They found their voices long ago, and ultimately their work has voice is when their taste in movies is all over the place. Don’t
become extremely identifiable as a result. If you (as a director) want misunderstand wrong – there’s nothing wrong with binge watching
to get the most out of yourself creatively, one of the most important movies across every genre; You can learn something from any movie
things you can do is develop your directing style so that your work no matter how far off from your own taste it may be.
can speak for itself.

170
Nonetheless, if you simply like watching movies, but aren’t as your strength may be as a writer. But the fact of the matter is you
particularly drawn to one genre, director, or style – then that may be aren’t doing yourself any favors as a director by resting on your
the first sign that you haven’t found your vision or style as an artist. laurels as a writer.

If this sounds like you, watch loads of movies (one or two a day) for If you really want to develop your directorial style, trying shooting a
as long as you can. Completely saturate yourself in films. After a test scene or a short film with little to no dialogue at all. When you
short while, some of them will get stuck with you. There will be those go back to your heavily scripted material, your work will improve
films that nag at you, that you want to go back and watch, or that dramatically.
inspire you to make something yourself.
Imagine a musician that isn’t very good at playing guitar, but can
Chances are, whatever films are drawing you back to them will be in write great songs. This person would always be held back by the fact
a similar genre or will deal with similar subject matter – and that may that they can’t express their art form to the fullest, much in the same
very well be the first step in identifying the films that you are best way that a director is held back when they don’t know how to direct
suited to direct and that you really want to make. with images.

2. Understand How to Tell a Story With No Dialogue Just remember, filmmaking is a visual medium. And as the adage
Everyone wants to be the next Tarantino or Sorkin. A lot of indie goes – show, don’t tell. It’s in the subtleties of camera movement,
films these days are busting at the seams with heavy dialogue, yet framing, and other visual choices that your directing style will really
there is often no substance to what is on the screen. There is no come out. Be sure to embrace that as much as you can.
distinct style in the way the dialogue is being delivered. 3. Tap Into Your Music Taste
While you might be more inclined to direct heavily dialogue-driven There are a lot of similarities between film and music. It’s no
films, you need to challenge yourself to tell stories without dialogue coincidence that the type of music that filmmakers love is often in
if you want to maximize your talent. This may seem counterintuitive, the same vein as the films they create. Take Tarantino for instance. It

171
would be hard to deny that his musical influence isn’t obviously put
front and center in so many of his films. As a result, the tone of his
movies is largely centered around his taste in music.

The Tarantino example might be the most obvious, but the same
could be said for nearly any auteur that has really found their voice.
It’s why Spielberg has worked with John Williams for so long and
why Fincher has stayed with Trent Reznor and Atticus Ross.

A big part of developing your style as a director is understanding

your taste in music. After all, 50% (or more) of the viewing
experience is dependent on the audio. Music guides the viewer’s
emotional experience.

And by the way... if you aren’t a big music fan, that doesn’t mean you
can’t find your voice. Perhaps your style is simply best served with
sound design or natural backgrounds. Whatever the case may be,
understand yourself on a creative level (musically speaking) as it is
very much related to who you are as a storyteller.

172
SECTION 4

Tips You Must Know Before Shooting a Multicam Production

Multicam productions have become more popular than ever, thanks to the extremely low cost of camera gear and easy integration into video editing
apps. Even still, many producers attempting multicam for the first time aren’t able to get it right.

While the thought of setting up a multicam shoot can be daunting to catch all of the spontaneity, while also having enough coverage to
producers and directors who have never done it before, knowing cut together the scene cohesively in post.
how to do it right has some massive benefits. Not only do multicam
Whether you’re interested in shooting multicam as a means to keep
setups help keep costly time on set to a minimum, they can also
your budget down, to give you actors more freedom, or you simply
provide creative freedoms that aren’t otherwise offered by single
have no other choice, let’s go over a few considerations for getting
camera environments.
started with multicam shooting.
For instance, if you are directing a comedy and want to allow your
actors to improvise, a multicam setup would be ideal so that you can Camera Placement
The very first thing you need to address with your multicam set up is
the placement of your cameras themselves.

173
If you want to achieve professional level results with your shoot, you lighting — but in the end it will completely balance out, as you’ll save
need to make sure that you are optimizing your coverage. In other loads of time once you start rolling.
words, if you are shooting a scene with two actors and you have
three cameras on them, you probably want a close up on each actor, Matching The Cameras
and then a wide/medium master shot. Obviously you can get The problem of mismatched cameras is one of the most common
creative with your multicam setups... just make sure you’re never issues on multicam setups, particularly on low budget indie films.
doubling up on coverage, regardless of the creative choices that are In many instances, small productions don’t want to rent two or three
made. identical cameras, so they mix and match various cameras that they
Lighting have access to in order to supplement their multicamera setup.
The manner in which you approach your lighting setup also needs to Mixing cameras can lead to serious problems. In an ideal world, you
change drastically from what you may be used to in single camera want every camera to be the exact make and model, or at the very
situations. least the same brand. For example a Canon 5D MK II and a Canon 7D
will match a lot better than a 7D and a Lumix GH4, since Canon and
When shooting with one camera, your setup naturally only matters
Lumix use completely different firmware and color science.
for the particular angle and take that you are executing. When you
go in for coverage you can make small adjustments to your lights Even if you are shooting on identical cameras, you still need to be
(such as walking in a key or fill) as needed. Everything changes with extremely diligent when it comes to your settings (camera profiles,
multicamera lighting. shutter angle, and white balance). Any slight difference in your
camera settings can cause some big headaches in post.
The easiest way to get the look that you’re after while maintaining
visual consistency is by setting up your lights much in the same way Final Thoughts
that a stage play or a sitcom is set up. To clarify – we’re not Shooting multicam isn’t right for every project, but when time is of
suggesting that you make creative choices that will make your final the essence and budgets are low, it can be a fantastic way to save
product look like a play or sitcom, but rather that you make rigging money and allow you to move quickly without sacrificing quality.
and logistical choices in that same way.
In order to do it right, you need to place your cameras strategically,
For example, lighting from above (by rigging lights to a ceiling or grid) have a rock-solid lighting setup, and make sure that you are using
would be hugely preferable over lighting using traditional stands. cameras that match as closely as possible.
The reason of course being that when rigged to the ceiling, the lights
are completely out of the way and you can shoot in nearly any
direction that you want. Lighting your set this way will inevitably
take more time up front — so be prepared for some extra time pre-

174
SECTION 5

How to Shoot Dynamic Video Interviews

Take your video interviews to the next level with these fifteen tips.

Shooting an interview can be one of the most challenging aspects of 1. Research and Preparation
the filmmaking process. As video producers and filmmakers, we’ve Good research is the key to getting a great interview. Anticipate
grown accustomed to controlling every aspect of the filmmaking what direction you’d like the interview to go – do research on your
process, but an interview setting contains a lot of uncontrollable interviewee and be well-versed on the interview’s subject matter.
variables that make it somewhat unnatural to shoot.
Through your research you’ll learn what you don’t know. Surprise
If you’ve ever wanted to take your interview skills to the next level responses may be the interview ‘gold’ you need to make the story
check out the following tips for shooting dynamic interviews. compelling and unique. What has the on-screen talent said in the
past about the subject? What have they not said?

175
Similarly, you should find that asking open-ended questions will elicit 6. Pick a Style
better, more interesting responses. You need to define a creative style for your production before you
can pick the right equipment and questions for your interview. Will
2. Outline
the interviews be flatly lit or have dramatic lighting? Will the
While there is definitely an uncontrollable element to every
interviewer be seen on camera as well?
interview, it’s important to have a solid outline for what you need
cover. It doesn’t need to be complex, just enough to help you get an Whether you’re emulating a style you’ve seen or coming up with
idea for how you want the story to progress. your own style formula, you need to make sure that the look is
clearly defined and communicated to the rest of the crew before the
One interview tactic is to start the questioning with safe and easy
camera rolls.
questions. This will make the interviewee more at ease and create a
“safe” interviewing environment. Wait to ask the “hard” questions 7. Use a Professional Sound Recordist
once the interview cadence and atmosphere has been set. Bad sound is a quick way to lose the attention of your audience.
Have a person on your crew who is solely responsible for recording
3. Location Scout
and monitoring on-set audio. The audio is arguably more important
As with any film shoot, location scouting is critical. Yes, this means
than the video in an interview setting
physically going to the location ahead of the shoot date. What type
of lighting does the environment provide? Is there electrical power? 8. Questions
Is there any ambient noise? What other problems can you Just as you should have at least a rough outline of how you’d like the
anticipate? You don’t want to have any surprises on the shoot day. interview to proceed, you should also come up with a list of possible
interview questions.
4. Pack Extra Batteries and Memory Cards
There’s no way to know exactly how long an interview may run. You Although many producers/filmmakers choose to share interview
don’t want the limitations of your batteries or memory to cut an questions with the “talent” ahead of the shoot, we warn against it. If
interview shoot short, so make sure you pack plenty of both. the interviewee has the exact questions before the shoot, they’ll
likely pre-formulate their responses. This can quickly make an
5. Communicate With Your Talent Before the Shoot interview feel uninspired and boring. Instead, just send over a broad
Communicating with your talent before the day of the shoot is a list of topics you’d like to discuss.
great way to minimize surprises on shoot day. You don’t want to
show up on set the day of the shoot only to find that your talent has You’ll likely want to record the interviewers questions as well, even if
worn a bright green striped shirt. It’s for this reason that I always they won’t make the final cut. This is useful for the editor who can
send my talent a checklist with what to expect, clothing use this audio to know what each question is about. It’s also a good
considerations, and contact information. idea to mic up the interviewer. If this isn’t possible, having the sound

176
of the questions recorded to the on-camera mic is better than If you would like the subject to look into the camera, there are
nothing. several products that will superimpose the interviewer’s face over
the lens. These devices are designed to work like a prompter and can
9. Repeat the Question in the Answer make the interview conversation more natural. One of the more
Try to have your talent repeat the question in their response. For popular models is the Eyedirect.
example if you ask, “What is your favorite color?” and their response
is “green,” it doesn’t give the editor much to work with. 12. Multicam

A better response would be “My favorite color is green.” Then the

editor has a complete thought, which makes the story easier to craft.

10. Control the Pace

Thinking of your interview as a conversation is a great way to make
your subject at ease, but there are definitely some dissimilarities
between an interview conversation and a normal conversation.
If you can, shoot with more than one camera. Having at least two
First and foremost, in a normal conversation humans tend to talk cameras will make editing much easier. For example, if your subject
over one another. While this may work for normal conversations, it is has to pause a sentence to sneeze, you can cut the sneeze out by
incredibly difficult to edit an interview if the host is talking over the switching to the other camera at the edit point. Shooting multicam
subject. will also protect you if one of your cameras fails.
It’s also important to control the pace of the interview, as subjects 13. Don’t Stop Recording
tend to rush their answers when being filmed. Control the pace by It’s best to keep the cameras rolling to catch any candid comments
setting the pace. Talk in a calm and slow voice and your subject will that might be useful in the final edit, even after the interview is over.
be more likely to mirror you. At the very least, it gives you a little pre/post roll so you can more
11. Decide on Eyeline easily edit.
Will the subject being looking at the interviewer or the camera? 14. Interview B-Roll and Nat Sound
Make this a conscious choice and relay it to the interviewee before It’s always a good idea to record quick b-roll type shots of your
shooting. It can be very distracting to have the subject’s eyeline interviewee, in case you need them to cover up edit points. If you are
change throughout the interview. If you want the subject to look at only working with one or two cameras, you can capture this footage
the person asking the question, it is important for the interviewer to at the start or end of the interview. Typical pick-up shots include
maintain eye contact throughout. This will force the interviewee to
keep this connection.

177
asking the interviewee to nod on camera (good reaction type shots),
as well as getting close-ups on hands.

Be sure to grab a minute or two of the natural sound of the room

before shooting (without anyone talking). This is important for
covering up edit points. Record the natural sound again if the sound
in the room changes throughout the interview.

15. Communicate with the Interviewee

Don’t simply start picking up and saying goodbye at the end of your
interview. Communicate what your are planning to do with the
interview footage and when they can expect to see the final video.
I’ve even heard of some people watching the interview with the
guest after the interview is complete. It’s a good way to find out if all
of the questions get answered.

178
SECTION 6

Three Reasons You May Want to Forget About Film School

Film school is a controversial topic amongst filmmakers. While some of the best filmmakers are formally trained, others skipped film school and got their
education on set. It could be argued that film school simply isn’t the best option for creatively minded individuals.

From a very young age, the importance of receiving a formal post- filmmakers didn’t attend film school or dropped out to get a head
secondary education is ingrained in us. We’re told that by going to start in the industry by working from a very young age. Count James
school and specializing in something, we’re going to land better jobs Cameron and Christopher Nolan as two of the greats that never sat
and make more money. Unfortunately, this type of advice is often in a film school class.
coming from people who aren’t even remotely in touch with the
That said, there are some personality types that benefit from a more
entertainment industry. They don’t necessarily understand the
structured creative environment and who are best served by going
benefits of choosing a different path.
to film school. It could be argued that they are the exception, not the
With filmmaking, your level of formal education may have no rule. A lot of creatively minded people learn best on their own terms
bearing on your level of success. In fact, some of the most successful

179
– by actually getting their hands dirty and learning the ropes in a real in their first working year after graduating film school as a result of
world environment. the false confidence they developed in themselves.

Probably the biggest benefit of going to film school is the fact that This isn’t always going to be the case, but it’s a fairly common issue
you are able to meet peers who may later be collaborators. Outside for filmmakers who want to try their hand at climbing the ladder on
of that, anything you can learn in film school can be learned on a film large-scale productions.
set (and then some).
2. On-set Experience Is Far More Valuable Than
Even if you’re volunteering on a film set, you’re a heck of a lot better Classroom Training
off financially than you would be if you were spending thousands of Some film programs offer some really great in-class training with
dollars in tuition fees. The reality is that film school will not get you a regards to directing, cinematography, editing, and other aspects of
job – networking will. If you want to reap the benefits of film school the craft. That said, no matter how good the training may be in any
as a means to network, then certainly go for it. given school, it will likely never come close to the training you will
pick up on a real film set.
But if you’re on the fence about film school in general, be sure to
read through these three reasons why film school may not be the There are so many intangible skills you can learn on a real set
right path for you. (including how to deal with people and how to handle problem
situations) that you simply won’t be exposed to in a controlled
1. Film School Can Give You a False Sense of Confidence
environment.
In film school, you can truly be led to feel that you can do no wrong.
This obviously differs from school to school and is largely dependent Don’t think that just because film schools might simulate film sets for
on your instructors. But for the most part, recent grads often have a you that it comes close to the real thing. It doesn’t. One way or
hard time adjusting to the real world of filmmaking based on another, you’re going to need to learn by doing — and by making
confidence alone. While in film school, you’re going to be writing/ mistakes on a real set.
directing your own projects all the time, and although this may
It’s up to you whether or not you jump in with both feet right away or
sound great, it doesn’t represent what real life is going to be like.
give yourself the buffer of film school before playing in the big
“The real trouble with film school is that the people teaching are so far out leagues.
of the industry that they don’t give the students an idea of what’s
3. You Can Spend That Money Making a Movie
happening.” - Brian De Palma, Director of Scarface
Many film directors (Quentin Tarantino included) have stated that
It’s a harsh reality check when you go from directing your own work there’s something to be said about skipping out on film school and
consistently to becoming a PA on a large set, where your opinion is using that money to make a film.
not typically welcomed. A lot of filmmakers have a really tough time

180
When people ask me if I went to film school I tell them, ‘no, I went to films.’
– Tarantino

It’s not uncommon for a film school to cost more than $20,000 per
year, plus the cost of room and board if you’re living out of town.

Assuming you are in a three to four year program, you may be talking
about $50 to $100k in overall cost, which may just land you a PA job
at the end of the process. Imagine what would be possible if you
were able to spend that money on a film instead. In a far shorter
amount of time, you would be able to learn by doing – and end up
with a finished product which can be used as an asset for your
career.

There is no substitute for making your own movie as a means to

develop your craft. When you do it in the real world, as opposed to
within the comfortable confines of a film school, you might just be
able to do it a whole lot better.

181
SECTION 7

How to Adapt Your Feature Idea Into a Short Film

Filmmakers are often faced with the challenge of reworking a feature film screenplay into a short film. Here’s the best way to go about it.

One of the most common approaches to feature film development forms, and an idea that works well as a feature doesn’t always work
today involves writing a feature length screenplay and then as well as a short film… Or vice versa.
shooting a short film based around it. The idea behind this approach
is that the short film will act as a proof of concept and essentially 1. Tell a Small Story Within the Greater Story
show potential collaborators what the director/producer team is The optimal length for most short films is 10 minutes, which means
able to do stylistically, even on a small scale. you have very little time to tell a complex story or explore a lot of
character detail. The number one mistake that filmmakers make
Although many filmmakers seem to understand the importance of when it comes to adapting their material, is trying to cram way too
adapting their feature-length material into a short, many of them much information into a ten minute short. Having just developed a
aren’t able to actually execute in an effective way. The reason being feature length screenplay idea, many filmmakers feel very close to
that features and shorts are in some ways completely different art their material and it’s hard for them to leave out important

182
moments, characters, or ideas from the short version of their story. context of a proof of concept), and can benefit your overall process
But the reality is you need to lose 90% of your feature in order to immensely. Chances are, if you’re chatting with development
make an effective short. executives, producers, talent, or anyone else that you might want to
involve on your film, above all else they want to understand your
Rather than thinking of how you can trim down your 110 page script
style and abilities.
into 10 pages, think about one of the small stories that you can tell
within the larger story at play. Maybe you want to tackle the catalyst Story is always important — but they will probably already know the
moment from the first act, or show the first time that two characters feature-length story you want to tell to an extent, and may have
meet. You might even want to shoot a short prequel that would take already read your screenplay. The short film gives you an
place before the first scene of the film. As long as the slice of the opportunity to really show them what you’re made of and let them
story that you are telling can be executed in ten pages or less, you’re start to visualize how your script will translate to the screen.
headed in the right direction. But the second that it feels like you are
forcing a bigger story onto the page, it’s time to rethink your idea. 4. Be Careful About Adapting a Single Scene
The most common solution that filmmakers come to when adapting
2. Focus on Character. feature length material is shooting a single scene from their film.
Although you might not be able to explore the extent of your feature Rather than creating a short film that can stand on it’s own,
idea in a short, you can explore your characters very deeply. filmmakers will often pick one of their favorite scenes from the
Characterization and character in general can be conveyed far more screenplay and just go out and shoot it.
quickly and effectively than plot through the use of powerful
The truth is that any scene is part of a greater sequence, and that
imagery and short concise visual scenes. You should be taking
sequence is part of an act which has its own arc, and is part of the
advantage of that when making any short film (but especially one
greater story as a whole. For that reason, most scenes don’t have a
based around a feature), because you are trying to show potential
concrete beginning, middle, and end to them in the same way that a
investors, collaborators, actors, etc. what the characters are made of.
sequence or act would in a film, and therefore don’t translate that
So rather than focusing too heavily on plot, ask yourself what short well as is to the short format. They might be fun to shoot and a good
film you can make that will give insight into who the lead character of experience for your actors, but the goal of really representing your
your story is on a fundamental level, and everything else will fall into film as a whole can get lost when going down this path.
place.
Final Thoughts
3. Show Off Your Style Short films are challenging enough to create as it is, but the process
One of the best opportunities that you have as a filmmaker is your is even more arduous when you’re adapting feature material. Almost
ability to show off your personal and artistic style in a short film. In every filmmaker at one point or another falls into the trap of
many cases, this is far more important than plot (at least in the attempting to tell a story that is way too big for a short format. The

183
end result always suffers from excessive dialogue and exposition,
unfocused scenes, and a general lack of style and tone.

Shorts should never be thought of as an abbreviated version of their

feature counterparts, but rather as supplementary material to them.
You want to be able to approach collaborators with your feature
script and a short film that gives a glimpse into the style, character,
and tone of the project. But at the same time, you don’t want to
overwhelm the viewer with so much information that it turns them
off of your project entirely.

184
SECTION 8

Tips for Shooting in Low Light

Check out these tips for getting great low light shots.

As any filmmaker or video pro will tell you, shooting in low light can are increasingly capable of shooting at high ISO numbers with
can wreak havoc on the image quality of your shots. But rest relatively low noise. With modern software you can minimize the
assured, you don’t have to own a RED EPIC to get great low-light grain associated with high ISO as well.
footage. Follow these tips the next time you have to shoot in low
light. 2. Use a Faster Lens
By far the best thing you can do to get better images in low light is to
1. Increase Your ISO get a “faster” lens. This means getting a lens with a wider aperture.
You may have heard that shooting in a high ISO is bad. This is true, While faster lenses are generally more expensive than their slower
but only up to a certain point. Yes, shooting in an ISO so high that counterparts, you can still buy fast lenses for a very low cost. For
the image becomes unusable is bad, but depending on your camera, example, you can get a brand new 50mm f/1.8 Canon lens for
you may be able to push your ISO with good results. Newer cameras around $100 on Amazon. I also recommend adapting vintage lenses

185
to work with your modern camera. I was able to find a fully built-in noise reduction technology that can help you take grain out
functional 50mm f/1.4 Olympus OM lens for $70 on eBay. of your footage.

3. Use a Tripod and Slow Down Your Shutter Speed 6. Bonus: Buy an a7S Camera
If you plan on shooting a lot of low-light footage, the Sony a7S or a7S
II is leading the pack in low-light capabilities. With ISO capabilities of
over half a million, you can shoot in virtually complete darkness.
What’s even more astonishing is the lack of noise.

You’ll be able to lower your shutter speed to allow more light by

shooting on a tripod. For example, if you’re shooting in 24fps you are
likely shooting at a shutter speed of 50. By shifting your shutter
speed to 24, you would essentially double the amount of incoming
light — but camera shake would normally make it too shaky to use.
Using a tripod can make camera shake nonexistent, making it
possible to shoot at longer shutter speeds.

4. Shoot in 24fps
Try to shoot in 24fps if possible. In slowing down your frames per
second, you will increase the amount of light captured in each frame.
The difference may not be incredible, but a simple jump from 30fps
to 24fps will increase incoming light by 20%.

5. Shoot in RAW
Shooting in RAW doesn’t make your image look any brighter in-
camera, but it will make brightening up your image in post a lot
easier. RAW images allow for more versatility when editing than
compressed images. Even more, Adobe’s Canon RAW editor has

186
SECTION 9

Nine Tips for Stabilizing Handheld Footage

Sometimes you just can’t shoot on a tripod.

Heading to the set or into the field without a tripod? Getting simply holding one hand around another. Adding the extra hand will
beautiful handheld shots can be a difficult challenge – the recent essential take your camera from being on a monopod to a bipod.
influx of camera stabilizers and Steadicam equipment is a testament
to that. Thinking out your approach to handheld shooting and taking 2. Keep the Camera Close
several of the approaches listed below can significantly minimize Holding the camera away from your body will severely increase
camera shake. camera shake. Most people make the mistake of holding the camera
like they would if they were taking pictures, near their eyes. But for
1. Use Two Hands shooting video you want to hold the camera near your chin and
One of the easiest ways to minimize shaky footage is to use two close to your body. By resting your elbows on your chest and
hands instead of one. Even if your camera is too small to be held by holding your arms parallel with your body, you can create a “cocoon”
two hands, find a way to use both. This can be holding your wrist or that will make your footage more steady. This technique is certainly

187
dependent on where your display screen is relative to your face, but 7. Use a Wider Lens
for most DSLRs this should work perfectly. It might seem like common sense, but try using a wider lens when
shooting handheld. While telephoto lenses might offer a shallow
3. Use a Wall
depth of field, they are incredibly difficult to keep steady, even with
Leaning on a wall is a great way to keep your footage steady. By
an image stabilizer. If you must have a telephoto shot, I recommend
simply putting your weight on a wall, you can create a sort of tripod
standing completely still and not moving at all.
between your two legs and the wall.
8. Minimize Focusing
4. Bend Your Knees and Float
Adjusting focus is one of the biggest culprits of shaky footage.
When moving with your camera, the best way to minimize vertical
Because you have to bring your hand to the front of the camera,
shift due to walking is to think of your camera as a cup instead of a
focusing completely negates any effort you’re making to stabilize
camera.
your footage. Try keeping your focusing to a minimum. In most cases,
If you apply the same physics of a full cup to your handheld camera, moving your body is much steadier than moving your focus.
you’ll quickly find the camera shakes much less. Remember to relax!
9. Fix It in Post
5. Keep Movements Simple It’s always better to shoot the footage right on location instead of
While handheld footage does give you the freedom to preform fixing it in post. If you can’t, the warp stabilizers built into After
elaborate camera moves, these moves can make your footage Effects and Premiere Pro make it extremely easy to stabilize shaky
incredibly shaky. It’s much more advisable to keep your camera footage. Of course, mileage may vary depending on the shot.
moves simple. Unless the shot calls for it, you may get a better result
by keeping your camera stationary.

6. Move Your Axis

When panning and titling, try pretending that your camera is
rotating around an axis in front of the camera. This will help you
avoid the foot shuffling that occurs when you simply rotate in place.
In moving your axis, you’ll quickly find more natural and fluid
movements. Think of your movements as being arcs rather than
pivots.

188
SECTION 10

Easily Forgotten Things to Check Before Hitting Record

Run through this checklist before you shoot.

Whether you’re shooting a corporate video or a feature film, there ensure you have enough record media to shoot on (cards, drives,
will always be a million things to consider before hitting record. etc).
Between actors, crew members, and producers, you can easily
If you’re not doing all the production and post work yourself, be sure
forget a vital camera setting in the chaos of it all. So before your
to have a conversation with the team about file type before
next big shoot, here are five things you need to keep in mind.
shooting. Often the video editor will prefer one file type over
1. File Type another.
Picking the right file type essentially comes down to two factors:
It should also be noted that some cameras don’t remember the file
size and quality. If you want the best quality possible, then you want
format you shot on last. So if you use a new card or replace a
to shoot in the most uncompressed format possible. Unfortunately,
battery, you need to go into your settings to make sure nothing has
with increased quality comes increased file size – so you’ll need to
changed.

189
2. Picture Profile in post. Save yourself the headache and check your white balance
A picture profile is the way in which your camera will record the every time the lighting changes.
colors of your image. While your image may “pop” if you’re recording
5. Formatting
in a high-saturation profile like portrait or landscape, it is generally
Each time you put a new card into your camera, it needs to be
advised that you shoot flat in-camera. Shooting flat means an
formatted. Most cameras can do this in-camera. If you shoot on large
unsharpened, undersaturated, and less-contrasted modification of
cards, it can be easy to forget to format before beginning a shoot —
the standard picture profile – allowing for more versatility when
but not doing so can mean you have multiple shoots or projects on
manipulating the video image in post. When shooting in a
the same card, which can be a real mess in post.
compressed format, it’s even more difficult to manipulate the image
in post, so you better make sure you’re recording in the color profile Create a solid system for shooting/importing/formatting. Perhaps
you want. you format your cards immediately after you import them or right
before you shoot on them again. Whatever your preference, stick to
3. Specks on the Lens
it to minimize confusion.
Now a clean lens may seem like a no brainer, but how often do you
actually clean your lens on set? It can be extremely easy for a small
speck to land on the lens during production and go unnoticed. If
you’re using a small display screen, a speck in your shot might not be
seen until you’re in the editing bay – and by that time, it’s not an easy
fix. Make sure you are regularly cleaning your lens on set with a
microfiber cloth or lens brush to avoid this problem.

4. White Balance
White balance can be easily adjusted in post if you’re shooting in
RAW. However, if you’re shooting in a compressed format, you can’t
change the white balance as easily. Make sure your white balance is
correct for your scene. If you don’t white balance correctly, you can
end up with inconsistent coloring.

The worst thing you could possibly do is set your white balance to
auto. On most cameras ‘auto’ tells the camera that it can change the
color cast during recording – meaning your image can go from blue
to orange in the same shot. This will make it even more difficult to fix

190
SECTION 11

Tips for Shooting Video on a White Seamless

Recreate the iconic look of the popular Apple product videos with these nine tips!

Shooting on a seamless white background is an incredibly popular Paper is much easier to keep wrinkle-free and it can be easily rolled
way to draw attention to your subject while minimizing distractions. back up and stored.
There are a number of different steps you can take to get this look.
Here are nine of them! 2. Light Your Subject and Background Separately
If you want to get a 100% seamless white background you need to
1. Use Paper Instead of Canvas think of your lighting in two different stages: the background and
A common mistake among new photographers and videographers is the subject. By separating the lights used on your subject and your
to use a cloth canvas when trying to get the “seamless” look. background, you can minimize shadows and hotspots in your image.
Unfortunately, cloth tends to crease up and it can be very difficult to Obviously this requires you to use (at least) two separate lights to
get all the wrinkles out. Instead, try using a paper backdrop instead. light your scene, but the added control is well worth it.

191
3. Distance Your Subject From the Backdrop 8. Use a Production Monitor With Exposure Peaking
By separating the distance between your subject and your A production monitor is a worthwhile investment, as they can
background, you make it easier to minimize falloff from different accurately tell you if your background is consistently lit. Recording
light sources. If you think about it, the background works like a giant tools such as the Ninja Atmos also have exposure peaking and focus
white reflector. The more space you put between your subject and peaking built in.
the backdrop, the less light is going to bounce off that reflector and
hit your subject. Having a great distance between your subject and 9. Use Diffused Light on Your Subject
the background also minimizes your risk of having shadows hit your To get the “Apple” look, you’ll want your subject softly lit. This will
backdrop. mean using at least three lights... one for your background and two
for your subject.
4. Use a Light Meter for the Background
When working with with a seamless backdrop, a light meter can
really come in handy. One trick is to properly expose the background
then move your aperture 1.5 stops higher to make it blown out.
Overexpose it and you run the risk of creating white feather edges
around your subject.

6. Use the Histogram and Your Eyes

Histograms may be a quick useful tool, but there is no alternative to
simply using your eyes to judge the scene. A histogram can’t tell you
if your scene is evenly lit.

7. Flag Your Lights

Spill suppression is incredibly important when working with a
seamless background. You don’t want the light hitting your subject
to hit your background and vice versa. This is where flags come into
play.

By flagging light, you can control the direction of a light, which gives
you much more control over the scene. If you’re short on
professional flagging equipment, a few clamps, a light stand, and
some white poster board will do the trick. Flagging light away from
your lens is also a great way to prevent any unwanted lens flares.

192
SECTION 12

Tips for Shooting a Period Piece on a Shoestring Budget

Period pieces are usually out of reach for low-budget filmmakers, but these five tips will open up the possibility of setting your story in a different era.

It’s tempting for many filmmakers to write scripts that take place in production as well. During pre-production for example, you (and
a completely different time period. After all, period pieces open up probably your art director/production designer) will need to
so many possibilities for telling new stories that just wouldn’t be thoroughly research the time period in which your film is set in so
relevant or possible when set in modern times. Unfortunately, many that you can portray it accurately.
of these same filmmakers are hit with a big wake-up call when it
Even in post-production, things can get tricky. Depending on how
comes time to actually produce their film, as they realize just how
good or bad your locations, you may need to do set extensions or
expensive it’s going to be.
other VFX work to help sell the setting that you’re trying to
When you’re crafting a period piece, everything is more expensive. emulate. Not to mention, more extensive and specific color
Not only do your hard costs skyrocket (wardrobe, locations, set dec, correction is often required to really help craft the feel of your
etc.), but a lot more time and effort is needed in other areas of the world.

193
With all that said, there are ways to make great period pieces even If you team up with the right stylist, they might just be able to work
when dealing with limited budgets. Your options certainly won’t be some miracles for you. Typically stylists have relationships with
as extensive as they would be if you were working with Hollywood- brands and can pull some really amazing options for you, usually at
level funds, but that doesn’t mean it’s not doable. no cost (since the items are loaned). Rather than spending your
wardrobe budget on actual items, invest in a good stylist and it can
If you’re willing to take into account the five tips outlined below, you
pay off big time.
might just be on your way to making your next period piece.
3. Props Are Everything
1. Choose Simple Locations
Without some key props, you won’t be able to create a realistic
The look of your film will ultimately be determined by the locations
world to set your film in. The good news is that you don’t necessarily
that you choose. If you choose the right locations, your work is going
need a lot of props, but just a few key props that can become focal
to be a lot easier both on set and off. However, if you make less than
points. For example, if you have the budget to rent a vintage car for a
desirable choices, you might not be able to pull off the look you’re
couple of days and can use it to capture all of your driving scenes,
going for and the entire project could fall short.
your production value just went up immensely. Much like the
My rule of thumb with locations on low-budget period pieces is to wardrobe solution above, you don’t always need to spend an arm and
always go simple. If you’re shooting an exterior shot at the beach, on a leg on props. The car example might be somewhat costly, but many
a farm, or in the forest, chances are there isn’t a whole lot of set dec other vintage props can be bought or rented for very little if you’re
that will need to be done. The same can be said about a vintage home willing to do some digging around.
or train station (that hasn’t been restored).
4. The Right Music Is Critical
These are just a few examples of course, but the point is that you Your locations, wardrobe, and props will get you most of the way
need to look for locations that work for you “as is.” Chances are you there when it comes to production, but post is really where it all
don’t have the budget (or research) behind your project to create comes together.
something from scratch, so look for locations with no discernible
One of the easiest, most effective, and inexpensive ways to add to
giveaways of modern times and you’re off to a good start.
the realism of your period piece is through the use of authentic
2. Get Your Wardrobe Sponsored music. By licensing some period specific music (not just for the score,
Wardrobe is one of the best ways to add production value and but also for background music, radios in the scene, etc.), you can
realism to your period piece. At the same time, it can be very costly. really shape the tone of your film and compliment all of the visuals.
Vintage wardrobe items can be really rare and hard to find and the
price can be prohibitive for many filmmakers. That said, if you’re
willing to knock on some doors, you might just get it for free.

194
5. Learn How to Color Grade
Color grading can be a very expensive part of your process. In many
cases, it should be left to a professional.

With that said, if you have a knack for color and are willing to do
some of the legwork yourself, you can make a huge impact on the
visual feel of your film with color alone. In the same way music will
add a layer of period-specific polish to your film, so will the color.
Whether you’re doing something obvious (like black and white) or
more specific (like a 60s technicolor look), the color grade will truly
bring all of the elements of your period piece together and will
inevitably make it feel far more authentic.

195
SECTION 13

Tips for Traveling Filmmakers

Sometimes working in film means hitting the road or taking a flight. We’ve put together five big tips to make life easier for traveling filmmakers!

Being a filmmaker has its advantages and disadvantages. For 1. Never Check Your Camera and Lenses When Flying
instance, many filmmakers have the opportunity to travel, which is a When flying, never trust the airport to handle your camera and
plus. Of course, the downside to this is the fact that you have to lenses. Instead, utilize the ability for carry-on and bring these pieces
pack a ton of expensive gear. With all of that that in mind, check out of equipment along with you.
this list of handy traveling tips for filmmakers.
It’s okay to check in tripods and other gear, just be aware that if you
Also, before we get started… traveling as a filmmaker isn’t just flying use a Pelican case, it’s automatically going to get flagged at the
from state to state or country to country. No way. Travel can also airport. Be sure to leave enough time for this inevitability. Also, it’s
mean packing your gear into your car and heading out across the wise to have a checklist of all your gear. A simple Excel spreadsheet
country. Because of this, we’re going to cover some tips for both will suffice.
flying and driving. So, buckle up. Let’s get rolling.

196
2. Be Sure You’re Insured the local stores might not have what you need. Plan ahead and be
No, this isn’t a plug for State Farm or AllState Insurance, but it should overly cautious. Don’t count on there being a Best Buy nearby.
be. In reality, no matter if you’re traveling or just filming locally, you
5. Make Sure Your Documents Are in Order
need to have your gear insured.
While this tip is primarily for those traveling abroad, it’s of vital
For insurance, you have three lines of defense. The first is importance to every filmmaker. Your passport is key to you
homeowner’s insurance. That’s right... if the equipment is yours and becoming a filmmaker abroad. But you also need to be fully aware of
you own a home, then whatever is in that home is covered. Of the travel alerts and warnings of your final destination, as this may
course, there are loopholes in this and the insurance company will require a little more documentation from you. This documentation
use them. may include, but is not limited to: passport, travel visa, immunization
records, and medical information.
Next is to have insurance as a small business, especially if you own a
production company — but this might not work for everyone.

Your third option is to go with a company like Front Row Insurance.

Companies like this have been in the business of insuring gear for a
long time. Just beware of imitators, and reach out to fellow
filmmakers to find out who they’ve used and their experiences.

3. Scout Your Location Ahead of the Travel Date

With the entire world readily available at your finger tips, it’s
exceptionally easy to be completely prepared for a filmmaking trip.
Use Google Maps and Google Earth to scout locations. Doing this in
advance will save loads of time when you finally get on the ground.

Also, be sure to know your environment and what you are shooting
and then plan accordingly. Understand the lay of the land before you
arrive and the distances between locations. Utilize available public
transportation instead of renting cars. Your bottom line will thank
you.

4. Bring Extra Batteries and Storage Media

Be sure to pack extra storage options and batteries. Sometimes the
closest town or village ends up being an hour away — and even then

197
SECTION 14

4 Tricks to Keep Track of Memory Cards on Set

Managing your memory cards can help you avoid formatting and deleting any footage prematurely. Here are four simple ways to keep track of your
memory cards.

When working on a rushed shoot, it can become difficult to keep Lock the Card
track of your footage. You need to know which cards have already If this is an available option (usually on SD cards), you can easily lock
been used and which memory cards need to be dumped/backed up. the memory card after shooting. This is literally the easiest thing
Keep track of your memory cards with these four easy tips. you can do — and yet many people never do.
The first thing you need to do before arriving on set is to make sure The lock is actually a mechanical switch that prevents you from
all cards are formatted and ready to go. Make sure you format them overriding any footage. Remember to turn the lock off after you
for the right camera as well. For example, on smaller sets with have dumped your footage. You will not be able to use the card until
DSLRs, SD cards and CF cards should be formatted for the camera. the lock switch is pushed back up.
If you are using a mix of cameras, make sure you format the card
again before shooting.

198
Mark the Plastic Case and drop your footage. You can download DaVinci Resolve for free
If you are using single clear card cases to manage your cards, mark and use the clone tool to safely dump your footage.
the back side of the case with an X.

Put the card in face up, and you can clearly read the size of the
memory card. After you shoot, put the card back in face down so the
X covers the face of the card. That will mark that the card has been
used.

Use a Case and Face Cards in the Same Direction

One of the easiest and most-used techniques is to use a card case for
all memory cards. Before arriving on set, put all of your cards face-up
in a case. After shooting, simply put the card back in the case, this
time face-down.

This gives an instant look at your available memory. Not only do you
know which cards you have used with a quick glance at the cards
that are still face-up, you will know exactly how many gigs you have
left.

Put Gaff Tape on the Card

For larger memory cards that don’t have locks on them, simply put a
piece of gaff tape over the connection points after you have used it.

Gaff tape is preferred because it won’t leave any residue on the card.
It will easily come off, and the cards info sticker won’t be damaged.

All four of these simple tricks are incredibly easy to do and will save
you so many headaches. Be sure you implement some sort of
management system and make sure everyone handling the cards
knows the protocol.

Also, be sure to use checksum verification when dumping your cards.

Always make sure everything was copied properly. Don’t just drag

199
SECTION 15

Cinematography Tip: Why ‘Day for Night’ Is a Horrible Idea

Thinking about converting your daytime footage to nighttime footage? Think again.

‘Day for night’ is the process of making daytime footage look like it if you are underexposing your subject. This means you will need to
was shot at night by either using a filter, post-processing, or avoid the sky if you’re trying to shoot a nighttime scene during the
both. While there are some examples in modern cinema of good day. It will be solid white, which will greatly reduce your creative
day-for-night conversions, usually day for night will only give you flexibility. Sure, you could tint your footage to tone down the white
poorly colored footage that isn’t very cinematic. Let’s take a look at sky, but a real night sky doesn’t work like that.
why day for night is a bad idea and offer a few creative alternatives.
In most shooting circumstances, the sky at night will be brighter on
1. You Can’t Shoot the Sky the horizon and very dark in the actual sky. If you’re shooting day for
One of the biggest differences between shooting at night and night, there’s really nothing you can do to simulate this nighttime
shooting in the daytime is the sky. Shocking, right? The daytime sky occurrence other than do a lot of post-processing which will take
is, for the most part, almost always going to be overexposed — even forever and likely look terrible. We’ll discuss this further below.

200
2. Shadows Will Look Off • Rotoscope various silhouetted elements to avoid awkward edges
One of the biggest problems with day-for-night conversions is the • Selectively track and level distracting elements
shadows. As you probably already know, shooting in direct sunlight
during the daytime is generally a bad idea. Your subject will get some • Add the film’s specific cinematic grading features
very unflattering shadows — specifically raccoon eyes. Moonlight Even after you do all of this, you’re still going to be hard-pressed to
normally doesn’t work like that. When it does, it still looks strange on make your day for night look convincing. Even the best After Effects
camera. teachers out there have a hard time making convincing day-for-night
conversions.
There will be other weird lighting occurrences that happen in the
daytime that don’t occur during the night, like harsh reflections and Just Light the Scene
possible lens flares. On the flipside of this, you’ll also have to worry Who said you can’t light a nighttime scene? Audiences are very easy
about portions of your subject being overexposed. You’ll have to to trick when it comes to lighting. Most people in the audience won’t
crush the whites in post in order to fix this. ask where that soft fill light is coming from. Instead, they’ll focus on
the content of film or video as long as the lighting is close.
3. The Color Cast Will Look Terrible
By using a dim light and a sensitive camera, you can generally get
Color is really where day-for-night conversions start to fall apart. At
good cinematic footage at night even if it doesn’t make a lot of sense.
its core, a day-for-night conversion is either a dark blue filter that’s
A simple battery-powered LED should do the trick in these
put directly in front of the camera or a post-processing technique
situations.
where you give your footage a dark blue tint.

However, no matter how you do it, dark blue footage is not

what nighttime footage looks like. There are a lot of colors at night,
not just blue.

4. It Will Take a Lot of Time in Post

In light of all of the hurdles we’ve mentioned above, the biggest
challenge to making day-for-night footage look convincing is the
post-processing. There’s a lot of work that needs to be done to do
‘good’ day-for-night conversions. A good conversion will:

• Do a blanket color grade/correction

• Track and replace the sky

201
SECTION 16

Learn the Lingo: 15 Weird Filmmaking Terms

From cheeseplates to dead cats, let’s take a look at some strange filmmaking terms.

When it comes to filmmaking, there are a lot of strange terms. a C-47 is one of the most-used tools on a film set. Typically they are
Learning the lingo is a rite of passage that every filmmaker has to go used to clamp filters to the barn doors of lights, but they can also be
through. Let’s take a look at some of the stranger filmmaking terms used to hold up fabric or prank unsuspecting crew members.
out there and figure out what they mean.
Juicer
C-47 Other Names: Electrician
Other Names: CP-47, 47, Peg, Ammo, Bullet
No, a juicer isn’t a kitchen appliance or muscular person. In film, a
On a film set, a C-47 is simply a clothespin. The origin of why it came juicer refers to an on-set electrician. A juicer is one of the most
to be called a C-47 is somewhat fuzzy. Some say it was named after important roles on set, as there’s typically a lot of power required to
the C-47 airplane because of it’s versatility. Others say they were operate all of the various pieces of equipment associated with
named after the bin in which they were stored. No matter the origin, shooting a film.

202
Martini Baby
Other Names: Martini Shot Other Names: Baby Stick, Baby Legs

A Martini, or Martini Shot, is the final shot before wrapping the set A baby on a film set is a small set of tripod legs. Tripod legs come in
for the day. It’s supposedly called the Martini shot because the next all shapes and forms, but if you are wanting to put your camera
shot would be taken out of a glass, aka post-wrap drinking. It’s also extremely close to the ground, you’ll want to go lower than what
been said that in the early days of Hollywood, stars would begin most standard tripod legs will allow. To do this you will want to use a
their post-wrap party a little early and start drinking martinis during baby, or small tripod legs, to get low-angle shots.
the last shot. When you hear the term martini said on set, it brings
about as much joy as a couple of real ones. Strike
Other Names: Striking
Stinger
To strike on a film set simply means to turn on a production light or
On a film set, stinger refers to a single extension cord. A stinger
series of lights. While it is less common in modern filmmaking, every
refers to any size of extension cord. Typically on a film set, stingers
now and then you might hear someone yell “striking” when turning
will be black instead of the bright orange cables found at local
on a light. However, some argue that it is much better to simply say
hardware stores.
“mind your eyes, light coming on.”
Legs
Cheeseplate
When a filmmaker is talking about legs, they’re typically talking
A cheeseplate is a metal plate with holes designed to serve as
about the legs of a tripod. On most professional tripods, the head
a multipurpose utility bracket for various film related accessories.
and the legs can be easily separated. Professional tripod legs are
While cheeseplates come in all shapes and sizes, they are almost
usually made out of carbon fiber, as they are light, tough, and good in
always used to create camera rigs. The holes allow the user to
extreme conditions.
mount screw-based devices easily.
Sticks
Abby Singer
Sticks is another word for tripod on a film set. If someone were to
Abbey Singer refers to the second-to-last shot at a specific film
say grab the sticks, they would be referring to both the legs and head
location. It was named after Abbey Singer, a famous production
of the tripod.
manager who would alert his crew two shots before the set needed
to be collapsed.

203
Cookie Typically a clapper will have a place to write the scene, take, and shot
Other Names: Cucoloris with some other information like production title, director, and DP.

A cookie is a device used to mask light patterns onto a background.

Cookies can come in all shapes and sizes, but they’re almost always
placed on a stand separate from the actual light source. They’re
called cookies because their hole patterns look like a chocolate chip
cookie.

Run and Gun

Run and gun is a term used to describe a style of filmmaking with
very little production equipment besides a camera. Run and gun is
typically used in documentary-style filmmaking, as filmmakers aren’t
always given the luxury of a controlled set. With cameras quickly
progressing in dynamic range and sensitivity, it is becoming
increasingly popular for indie filmmakers to utilize a run and gun
approach to their craft.

Dead Cat
Other Names: Wind Muff, Mic Cover

On a film set, a dead cat is a fuzzy cover that goes around the end of
a boom mic to block out wind distortion. The name fits the accessory
perfectly, as its furry exterior makes it look just like a dead cat. Rode
currently sells a ‘Dead Wombat’ that is slightly larger than a
traditional dead cat.

Clapper
Other Name: Film Slate, Clapboard, Slate, Clapperboard,
Slapperboard, Time Slate, Board

A clapper is a board used for syncing and identifying a shot in post. A

clapper is most notably the most iconic accessory on any movie set.

204
SECTION 17

Keeping a Long Dialogue Scene Visually

No matter how great your writing, heavy dialogue scenes can begin to feel boring. Here’s how to keep things interesting on those long takes.

While shooting a one or two page scene with lots of dialogue might Move the Camera
be fairly straightforward, things get much more complicated when A roaming camera (whether handheld or on a steadicam) will always
you get into lengthier page counts. hold the viewers attention better than a static shot. Just as it’s
important that you choose the right type of camera movement for
For instance, when you’re shooting a conversation between two
your scene, it’s also important to choose the right movement for
people sitting at the dinner table… If you were to cover it in the
your audience. With long dialogue scenes, always look for ways that
traditional sense (a wide and two close-ups) you’d run out of steam
you can move that camera, whether it’s panning back and forth
after a minute or two in the editing room pretty quickly, and things
between your actors, circling your talent, etc. to keep your audience
will likely start to get pretty boring. However, if you can follow at
visually stimulated.
least one of the tips on this list, you’ll be in much better shape.

205
Move Your Actors
If you’re hellbent on no camera movement at all, either because it
doesn’t work with the mood you’re setting or it’s technically
impossible, then consider moving your actors instead. Say for
instance you’re shooting the dinner scene as described above and it’s
six pages long. Why not have one of the actors get up at the two page
mark and walk to the kitchen to get something? Whether the other
character follows or not, you now have a new background and new
angles on both characters and have subsequently added more
dimension to the scene.

Cross the Line

Those of you that went to film school have had it drilled in your
heads to never ‘cross the line’ (which is of course the imaginary axis
the camera sits on), but rules are made to be broken. Assuming you
don’t want to use a roaming camera and want your actors to stay
static, crossing the line is a great way to completely change the
perception of a scene by simply capturing reverse coverage. If
there’s a beat in your scene where the tone or pace changes,
consider using a cutaway shot to bring you across the line and then
shoot the remainder of the scene from the other side. If nothing else,
it will keep things interesting and let the viewer subtly know a
change has occurred.

And there really is no better way to understand the craft of shooting

a heavy dialogue scene than by watching great films by some of the
masters of dialogue. Filmmakers like Quentin Tarantino and Richard
Linklater are notorious for their use of dialogue, and both employ a
variety of techniques to keep the viewer stimulated. In particular, I
recommend watching Inglourious Basterds and Before Sunrise (by
each respective auteur) for some inspiration.

206
SECTION 18

Film Societies: What Do Those Abbreviations Mean?

ACE, ASC, DGA. What do those letters mean? Here’s a look at the most popular film societies.

Have you ever taken notice of the letters that appear after names in The objectives and purposes of the American Cinema Editors are to
movie credits? Those post-nominal letters indicate a society or advance the art and science of the editing profession; to increase
union that person is a member of. Here are the most well known film the entertainment value of motion pictures by attaining artistic pre-
societies and organizations, particularly those you will see listed in eminence and scientific achievement in the creative art of editing;
opening and end credits. to bring into close alliance those editors who desire to advance the
prestige and dignity of the editing profession.
American Cinema Editors — A.C.E.
American Cinema Editors (ACE) was founded in 1950 and is The organization votes members based on their professional
officially defined as an honorary society of motion picture achievements and their commitment to editing motion pictures.
editors. The society should not be confused with the Motion Picture Membership requires a sponsorship by two active members, as well
Editors Guild, the union organization under I.A.T.S.E.

207
as minimum of five years of editing experience on features or The BSC instituted four objectives:
television.
1. To promote and encourage the pursuit of the highest standards in
The ACE has published the Cinema Editor quarterly magazine since the craft of Motion Picture Photography.
1951 and celebrates achievement with the annual Eddie Awards.
2. To further the applications by others of the highest standards in
American Society of Cinematographers — A.S.C. the craft of Motion Picture Photography and to encourage
The American Society of Cinematographers (ASC) was founded in original and outstanding work.
1919. The goal was to advance the art and science of
3. To cooperate with all whose aims and interests are wholly or in
cinematography and build a collaborative environment for
part related to those of the society.
cinematographers to share ideas and techniques.
4. To provide facilities for social intercourse between the members
The organization is not a labor union or guild, but an educational,
and arrange lectures, debates and meetings calculated to further
cultural, and professional organization. Membership is extended by
the objects of the Society.
invitation, exclusive to those who have demonstrated outstanding
ability as a director of photography. Cinematographers working both in the United States of America and
the United Kingdom can be members of both the ASC and BSC, often
The ASC credit first appeared in the title sequence for the 1920
seen with both designations in credits.
western film Sand, shot by Joe August, ASC. That same year, the
organization began publishing The American Casting Society of America — C.S.A.
Cinematographer magazine. The ASC is also the publisher of The Casting Society of America (CSA) was formed in 1982, originally
the American Cinematographer Manual, commonly known as the known as the American Society of Casting Directors. The society is a
filmmaker’s bible. collection of the best casting directors in film, television, and stage.
The best work is celebrated annually with the American Society of CSA began publishing a monthly newsletter in 1983. Since then,
Cinematographers Award for Outstanding Achievement in membership has grown tremendously, with CSA members based in
Theatrical Releases. the US, Canada, Italy, Australia, and South Africa. The CSA
celebrates achievements with the Artios Award, named for the
British Society of Cinematographers — B.S.C.
Greek “perfectly fitted.”
The British Society of Cinematographers (BSC) was first conceived
by Bert Easey, the head of the Denham and Pinewood studio camera Directors Guild of America — D.G.A.
departments. Officially formed in 1949, the society aimed to mirror The Directors Guild of America (DGA) is a craft union representing
the previously established American Society of Cinematographers. directors and members of the directorial team working in film,

208
television, commercials, documentaries, news, sports and new The WGAE was founded in 1912 by a collection of book, magazine,
media. and drama writers. The WGAW was founded as the Screen Writers
Guild in 1921 in Hollywood. In 1954, five writing unions formed the
Founded as the Screen Directors Guild in 1936, the group merged
WGAE on the east coast and WGAW on the west coast.
with the Radio and Television Directors Guild to form the DGA in
1960. The union offers the DGA Award for Outstanding Directorial Like the DGA, these unions are some of the most well-known
Achievement in Feature Film,which has nearly predicted every organizations, but do not use any designations in the credits.
winner of the Best Director Academy Award.

This union is one of the most well known organizations, but

members do not use the DGA suffix in any credits.

Producers Guild of America — P.G.A.

The Producers Guild of America (PGA) represents television, film,
and new media producers. Originally formed as the Screen
Producers Guild in 1950, the union has since merged with the
Television Producers Guild and American Association of Producers.
The PGA celebrates with the Producers Guild Award, originally
called the Golden Laurel Awards.

The PGA first introduced the post-nominal letters in 2012, allowing

approved producers to add the designation. Unlike other societies
and organizations, the mark does not indicate membership in the
Producers Guild. It only certifies that a producer performed a major
portion of the producing on a given motion picture.

The mark is licensed on a film-by-film basis, meaning any producer

who has previously used the mark is not automatically able to
continue using the designation.

Writers Guild of America (East, West) — WGAE, WGAW

The Writers Guild of America is a combination of two labor unions.
The Writers Guild of America East (WGAE) and the Writers Guild of
America West (WGAW).

209
SECTION 19

5 Tips For Shooting Unscripted Reality Content

Shooting unscripted reality content can be amazingly challenging, but these tips will help any unscripted set achieve better results.

On the surface level, reality television appears to be an easier speed of the crew. So for those of you that are looking to shoot
medium to shoot or DP than traditional scripted content. After all, unscripted reality content in the future, be sure to follow these five
most reality shows have a relatively low production value and don’t tips to ensure you’re coming to set prepared.
involve complex lighting setups. However, unscripted television
poses all sorts of other challenges both on set and off, and so DPs 1. Flexible Gear > Cinematic Quality
that plan to work in reality need to learn how to approach their It’s very common for new reality DPs that have a background in film
work in a different way. work to lean the wrong way when it comes to camera choice on a
reality series. While you might have it drilled into your head to
It’s quite common for first-time reality DPs to completely drop the always opt for the highest quality camera you have available to you,
ball and be replaced before their first week is up. This happens for most shows simply shouldn’t be shot on a RED or ALEXA.
many reasons — a big one being their inability to keep up with the

210
More often than not, cameras such as the Canon C300 MKII or Sony ultimately let you get more coverage — which is incredibly valuable
FS7 are the best choice when shooting reality television. While these on reality sets.
may not offer the same quality as the ALEXA that you shot a feature
on last month, they’ll allow you to work much faster and with 4. Use Free Run Timecode
minimal crew support. The same goes for GoPros, DSLRs, and other Every show will be shot differently and have its own technical needs.
cameras with a relatively small footprint. That said, in most cases you’ll be at a huge advantage by using free
run timecode on your camera, as opposed to slating and using record
2. Light for the Space run.
Unfortunately on most reality sets there’s just not enough time to
With multiple cameras on standby at any given time, there’s simply
“light” every single shot in the same way that you would on a
no easy way to quickly slate up before each take — at least on most
narrative set. And even if you do have the time, reality shows are
reality sets. Instead, sync up your cameras beforehand and use free
typically not supposed to look lit, which means you need to ignore a
run timecode so that all of the cameras stay synced throughout the
lot of what you know about narrative lighting when working in
day. This will allow your editor to painlessly sync all of the cameras
reality.
together and start cutting as quickly as possible.
I typically recommend lighting the space in a general sense, as
opposed to creating specific setups for each shot. Using space lights 5. Prep for Audio
or china balls will help bring up the ambience inside a room without Most narrative DPs have little to no experience with audio, but in the
locking you into a specific area in which you need to shoot. This reality world it’s quite common for you to need to do double duty.
means you can easily flow from one shot to the next without having Although your show will likely have a dedicated sound department,
to make time-consuming lighting changes. the nature of a reality set is very unpredictable and some
circumstances may even require that you record audio yourself,
3. Minimize Equipment straight to the camera.
Although your primary lighting may involve space lights or other
Chances are you won’t be required to bring any audio gear to set, but
sources that are out of the way, you’ll still have some additional
at a bare minimum you should understand the manual audio controls
lighting gear to manage. For instance, you might have some LED
on your camera like the back of your hand. You need to be ready to
panels that you walk in for OTF shots, or some extra C-stands and
plug in an XLR and set your levels in mere seconds on a reality set,
flags for light control.
otherwise you may risk missing an important moment or take.
The more gear you have, the slower you’ll move on set. Reality shows
tend to move quickly and are often under-crewed, so do yourself a
favor and have only the gear that’s absolutely essential with you on
set. This will help you move between set ups much faster, and

211
SECTION 20

The Four Advantages of Digital Over Film

When digital cinematography first hit the scene, most pro DPs wouldn’t go near it — and for good reason. It wasn’t until recently that digital cinema
cameras not only offered a viable alternative to film cameras, but in some cases an even stronger option. Let’s look at some of the advantages of digital
over film.

There’s no question that film is still the gold standard to which all Low Light
digital formats are held to. It still delivers a type of character that is Filmmakers that came up during the digital revolution very much
beautifully flawed and organic in a way that digital never will be. But take for granted the low-light capabilities of digital cameras.
even still, there are some instances where digital is simply the Standard film stocks often are rated anywhere from ISO 100 to ISO
better choice. Here are just a handful of examples of when that’s the 800, with 1600 and 3200 being options as well (although less
case. common). That said, just about any professional digital cinema
camera (or DSLR for that matter) can shoot at much higher settings
with far cleaner results.

212
There is simply no film equivalent to cameras like the a7S II or the 4. Longer Takes
C300. There is no film stock that will allow you to shoot without any Many directors today have come around to the digital format simply
lights and still get noise-free results. Naturally, shooters that need to because it allows for long (or virtually unlimited) record times. Again,
work with limited lighting are going to be drawn to digital formats. this is something that digital shooters without film experience very
much take for granted. Veteran filmmakers, however, can’t deny the
2. Cost and Time On Set
fact that having the ability to record indefinitely opens up a lot of
Even if you’ve never shot on film, chances are you’re well aware of
creative possibilities.
the costs associated with going down that path. While film cameras
are cheaper than ever to buy (or rent), film stocks and processing are A standard 1000 foot roll of 35mm motion picture film will only give
still quite expensive and very prohibitive for low-budget filmmakers. you about 11 minutes, which isn’t a whole lot. This isn’t always going
to be an issue, considering that the vast amount of takes on any
And even in cases where an indie production is able to scrape
given productions will run less than 11 minutes. But for directors will
together enough budget to shoot on film, there can be other
a specific type of approach on set, this can be a negative.
ramifications while on set. More specifically, productions will be
need to shoot at a lower ratio (perhaps only getting two or three
takes per shot) in order to conserve their film stock.

3. Turnaround Time
Many of us have taken for granted the fact that there is virtually no
turnaround time when processing your digital dailies. In some cases,
productions now will even opt to have an editor working on set who
will create assembly cuts of scenes as the rest of the crew is still
shooting.

It goes without saying that this certainly isn’t the case with film.
When shooting on film, it will take several days (or weeks) to get
your processing/scanning done, and only then will you be able to
move ahead on the edit. Not to mention, if there are any issues with
the footage, you will need to schedule a pickup day. Unlike digital,
you wouldn’t have been able to know on set.

213
SECTION 21

9 Tips for Shooting Video in the Rain

Shooting video in the rain is a tricky proposition. Here are a few easy tips for getting it done.

Mixing water and electronics is never a good idea. If you absolutely You will, of course, be limited in your ability to adjust focus and view
must shoot outside during a rainstorm, there are a few things you your footage on the camera, but when you’re shooting in the rain,
can do to make sure that your equipment doesn’t get ruined. this is just one of the limitations you’ll have to deal with.
Let’s take a look at a few different ways you can protect your gear
from the elements. 2. Improvise a Rain Cover (If You’re in a Pinch)
If you’ve left your rain cover at home, it’s not the end of the world.
1. Get a Rain Cover There are plenty of DIY options out there. The most popular option
The best thing you could possibly do to protect your gear from the is to place a Ziplock bag around your camera and cut a hole out for
rain is buy a rain cover for your equipment. There are a lot of the lens to stick through. You could even put gaff tape around the
professional options out there, and most of them feature a few lens hole to keep it from opening more.
adjustable ties that can fit snugly around your camera.

214
If you don’t have a ziplock handy, you could always use a trash bag • Rain is Noisy – Even the best unidirectional mics will have an
which can double as a poncho to keep you (relatively) dry. impossible amount of background noise.

3. Use a Lens Hood • Rain is Dangerous for Audio Equipment – It goes without saying,
but anytime you mix electrical equipment with water, bad things
are going to happen. This is especially true with microphones. No
matter if you use a boom mic, lav, or video mic, you’re going to run
the risk of ruining your mic if it gets wet.

• Rain Limits Your Audio Options – There’s really no good way to

work around rain when it comes to audio. If you use a boom, it’s
going to get soaked. If you use a video mic, it’s going to get hit by
rain drops and be unusable. The best option in the rain is a lav mic,
A lens hood is a simple plastic cover that fits over the end of your but even then your run the risk of getting a lot of unnecessary
lens. They are specially designed to keep out of the field of view. ambient noise.
Traditionally, lens hoods are used to protect your lens from bumps
So if you need to shoot in the rain, there’s a good chance you’ll have
and sunlight, but they can also work as a cover to keep rain off the
to do some ADR work in post. It’s also even more necessary to
front of your lens.
record field noise when shooting in the rain, as there’s a chance that
You can pick up a lens hood for about $10 online. I highly you can use the Capture Noise Print feature in Audition to minimize
recommend getting one for all of your lenses, just in case. some of the ambient noise produced by the raindrops.

4. Don’t Clean Lenses With Your Shirt 6. Wipe Off Your Gear Afterwards
Water on your lens is super annoying. Not only does it completely Most professional gear is water resistant, meaning it won’t
ruin your shot, but it also leaves smudges if you try to wipe it off with immediately ruin if it gets wet. But even water resistant equipment
a microfiber. can get compromised if water is left on it for a long time.

If you have a significant amount of water on your lens you can lightly If you simply stick a wet lens into your pack, you run the risk of water
dab with a t-shirt. After you dab your lens, use a microfiber cloth to sitting on the internal electronics in your camera. This could easily
wipe off any remaining residue. degrade them over time.

5. Prepare for Bad Audio 7. Use Battery-Operated Lights and Keep Them Safe
Audio is almost impossible to work with in the rain. This is for If you need to use lights during a storm, you can’t simply plug them
multiple reasons: into an electrical outlet. That would be a major electrical hazard. A

215
battery-powered LED light inside a large plastic ziplock bag is
usually enough to light a basic set.

There are a lot of battery-operated LED light options out there. One
of the best brands for casual productions is Yongnuo. They create
super-cheap LED lights that take Sony batteries. You can pick one up
for as little as $60.

8. Silica Gel
Moisture can be an absolute disaster for cameras, especially if the
moisture gets inside your lens. The easiest way to suck moisture out
of your camera bag: silica gel, the same kind found in shoe boxes. You
can pick up a pack of silica gel bags for about $7 online.

9. Avoid Shooting in the Rain

It’s always best to avoid rain when you can. If you’re shooting a
documentary, then you may have no choice. But for narrative film,
you’ll always want to control your environment by simulating fake
rain. There are tons of tutorials out there on the subject. You can
even use a water hose if you’re in a pinch.

216
217
SECTION 1

Video Editing Tip: Organize Your Hard Drive the Easy Way!

Keeping your assets organized in your NLE is vital, but now you’ve got to organize your hard drive! Here’s a great way to do it.

Keeping your project nice and organized when editing is essential –

you never know who you might have to hand the project off to, or if
you might have to come back to it much, much later.

If it’s not organized, headaches and cursing ensue. Keeping things

organized outside of the NLE – on your hard drive or server – is just
as vital for passing off a project or archiving it. Here’s a look at one
potential project organization setup that is great for organizing
projects.

218
Approvals Media

This folder is for non-final versions that are ready for the client to Some people prefer to keep their media in a different place/drive
look over (usually .mp4s in my case). than their projects. If you like to keep it all together, put it in this
Media folder, organized by “Reel X” folders to separate card/shoot
Audio
days.
There are 4 folders inside the Audio folder: Projects
• Mixes: for mastered & mixed .wav or .aif files
This is for all project files, including Premiere/Avid/FCPX/After
• Music : raw stock or original music Effects, Motion, Cinema 4D, Flash, Audition, Soundtrack Pro, etc.
• SFX
• VO It’s also good to add subfolders for each program (like PR, AE, FCP,
FL, C4D, and so on) plus an XML for any XMLs created for program
Documents interchange: FCP -> Premiere/After Effects, Premiere -> Resolve,
etc.
Put scripts, interview questions, project briefs, casting notes, etc. in
here. VFX

GFX This folder is distinct from the GFX folder – This should be used for
any footage elements like green screen passes, background plates,
This folder is for any non-footage elements like logos, images, pre-
or non-mograph output from After Effects or Motion (like speed
rendered lower thirds, motion graphics, etc.
changes, and logo blurs).
Masters

Directly inside the Masters folder is where I put the master .mov
files – ProRes 422 HQ typically.

There’s also a subfolder called Deliverables. This folder is specifically

for non-archival delivery formats needed, like H.264 for web, ProRes
or XD Cam for TV station delivery, .m2v/.ac3 files for DVD, etc.

219
SECTION 2

How To Increase Your Editing Speed Dramatically

As editors, we are always looking for the best way to tell a story. In most cases, the best possible version is only found after many passes of editing.
Luckily, there are many things you can do to increase your editing speed significantly and get to the finish line faster.

Editing, like any other part of the creative process can be both You always want to challenge yourself to get better results and to
highly enjoyable and immensely frustrating. When things are going tell your story in the most efficient and effective way possible. Many
well, it’s an extremely rewarding experience that allows us to finally times, this means that you will need to go through many different
see our projects come to life. On the other hand, it’s possible to get iterations of your edit – which is completely fine. In fact, it’s
into slumps when editing (especially early on in the process) that encouraged.
can prevent us from finishing on time.
You might have a general idea of what your film is going to look like,
As with any creative process (editing included), the best way to get but truthfully you will never really know until you can watch a
to the finish line is by having a mold to work from. finished version. For this reason, try to get a first rough cut of your
project completed as quickly as possible. After all, if the edit is going

220
to change so drastically throughout the process anyways, you are
better off getting the first pass done sooner than later (even if it’s
flawed), so you at least have something to work from.

You don’t want to spend too much time finessing edits and
smoothing over cuts on a first pass of anything, since you are likely to
lose just about all of that hard work.

Here are some tips for getting through your edit faster, so you can but, seriously. Don’t do it. No matter what, it’s going to get redone,
start to focus on the revisions more effectively. and let’s face it – you’re probably not that proficient with post-audio.
Organize Like Crazy So leave it to the pros and do what you do best – edit! Even if it
means having to listen through some crappy audio during the rough
Organization may not exactly be the sexiest part of the editing
cut/assembly stages.
process, but if you do your legwork up front and actually set up your
project file properly, you will be able to work way faster once you’re Avoid Going Through Every Take
actually in the thick of things. Depending on how you (or your director) shot the project, you may
Organization includes everything from creating proxy files (so that have a ridiculous amount of coverage to go through. Frankly, you
you can edit quickly, even from a laptop) to logging and labeling all of simply don’t need to. Some editors like to go through every take first
your footage properly. The last thing that you want to do is get and do ‘selects’ where they will place their favorite clips in a timeline,
halfway through an edit while on a roll and then have to stop for 20 but in many cases that’s a waste of time, considering you aren’t going
minutes to go and look for a clip. Organize your footage like crazy to use 90% of that material.
and you’ll thank yourself later. Instead, go through the edit intuitively. Ask yourself, “what comes
Don’t Worry About Audio Edits next?” By doing this, your edit will feel far more organic and will
move much more quickly.
Your audio is going to sound pretty bad during the rough cut of your
film. Obviously if your sound recordist did their job properly, the Learn Your Keyboard Shortcuts
actual audio itself will be high quality. But in the context of your edit, If you haven’t already started editing with keyboard shortcuts, then
it may not sound great at all. Certain takes will be louder than others, drop what you’re doing and learn how to edit that way now. On a
there will be gaps where no room tone is placed, sound effects will really small project (like a 30 second commercial) this may not be as
be missing, and loads of other issues will arise. much of a factor, but when dealing with a substantial short or
It will be tempting to start finessing your audio so that it sounds far feature film, you can save a lot of time by not juggling the mouse and
more clean, especially if you have to show your producers a cut — keyboard so much.

221
You wouldn’t believe how much time you actually spend physically
moving between mouse and keyboard when editing, not to mention
the fact that keyboard shortcuts are in themselves much faster than
‘drag and drop’ mouse editing.

Use Placeholders
Sometimes you’re on a roll when editing a scene or sequence, but
then you hit a wall. Something’s just not working creatively. Maybe
you can’t find the right temp track to use, or there isn’t a good
enough transitional shot to bring you into the next act. Whatever the
issue may be, if you start to get stuck on something trivial – just
move on.

You don’t want to waste an hour of your precious time trying to

finesse an edit or work on a scene that just isn’t gelling. Instead, don’t
be afraid to just drop in a placeholder (which could simply be a title
card, explaining the scene that will go there) and move on. After
getting through a few more scenes and maintaining your
momentum, it will be a lot easier to go back to that placeholder and
figure out what you want to do there, since you’ll be looking at it with
fresh eyes.

222
SECTION 3

Five Reasons to Get a Color Grading Control Surface

A control surface is an essential piece of gear for professional color correction. Here are five good reasons why.

Though this is no secret to seasoned professionals, many aspiring buttons and dials, you’ll be scrolling through menus to find the
colorists don’t realize the inherent value that a color grading control parameter to change, far from a deal breaker to many.
surface will bring to their work. After all, many professional
No matter which model you choose, a control surface is an essential
software packages can be used without additional hardware.
aspect of getting any job graded and delivered on time. Let’s take a
The DaVinci control surface maps many of Resolve’s functions to look at several specific reasons why any surface is a must for the
dedicated buttons and knobs, making grading a breeze. However, its serious colorist.
hefty price tag is out of reach for many. Luckily, third-party surfaces
from Tangent, JL Cooper, Avid and newcomer OxygenTec harness 1. Speed and Multiple Actions
much of the DaVinci panel at a fraction of the cost. With fewer The biggest and most obvious advantage to using a color grading
control surface is speed. With dedicated knobs, buttons, dials and

223
wheels set to specific functions, muscle memory quickly develops as project or scroll to the beginning of the timeline to play the cut for a
you learn your panel. When you get fast enough, color grading is no client if they walk.
longer frustrating... it’s actually fun! You’ll be wondering how you
ever did good work without a panel for this reason alone. 5. Client Perception
When engaging a new customer relationship, you have to instill
Speed isn’t just about jumping to specific commands to alter your immediate confidence in your clients so they are confident their
image. When coloring, it’s helpful to adjust several parameters at project will be handled professionally. Purchasing a panel is one way
once to see how the image reacts. This will enable the colorist to to forecast this. By owning a control panel showing your clientele
experiment with a wide range of looks to gauge a favorable client you’re serious about the craft. What’s more, a monetary career
reaction. investment now will pay off in huge ways in the future. In time,
better work and more prestigious clients will follow, overshadowing
2. Trust Me, Your Work Will Improve
the panel’s initial cost.
Working with a panel enables an organic relationship with your
images. By controlling the color wheels, you’ll intuit where the image Consider a Control Surface Today
wants to sit. The physical nature of working with your hands will also
prevent you from processing every job in the same way. A writer’s control surface is a keyboard, which is fast since every
letter is mapped to a specific key. Similarly, a colorist doesn’t want to
Using the color wheels and dials allows for finely-tuned adjustments click around on the screen when a gestural input is available. The
that are difficult to articulate with a mouse. Many times in session, nuanced nature of color benefits from having a device that is attuned
colorists will push the slightest change in the hue of a skin tone to to these subtleties.
satisfy the client. The software color wheels inside Resolve are small,
making these kinds of moves cumbersome.

3. Stave Off Carpal Tunnel

The ergonomic layout of every panel provides minimal strain for long
grading sessions. If you try to grade a longer video you’ll quickly
understand the pain-limiting possibilities of a control surface.

4. Execute Actions from Other Applications

Since the control panels are dedicated instruments for Resolve,
button presses continue to interact with the application regardless
of what’s in focus. If you’re browsing the Internet, you can save your

224
SECTION 4

Film Trailer Editing Tips

No matter how great your editing skills are, cutting together a film trailer is an art form and it requires a very unique approach.

Trailers play a vital part in the success of any independent film. Not cut a great trailer as a means to lock in a distributor, or simply to
only because they help to generate buzz for the film once it’s ready promote the film’s release – it’s critical that the trailer you cut is
to be released, but also because they can help secure a release (or impeccable. A bad trailer can absolutely ruin the success of a film
distribution) in the first place. and there is really no excuse not to be able to cut a strong trailer
from a feature film. All it takes is a little practice and some attention
It’s not uncommon for a distributor to commit to a film without
to detail.
actually seeing it in its entirety. At film markets, distributors, sales
agents, and other industry pros don’t always have the time to watch On Hollywood-level feature films, the editor of the film obviously
films in their entirety before making an offer or securing a deal. isn’t cutting the trailer. It’s going to a dedicated editor, usually
working at a post-company that only focuses on trailers and
Naturally, they have to rely on the trailer as a means to represent
promos. The reason being that trailer editing calls for its own
what the film is capable of. But regardless of whether you want to

225
distinctive approach. On your indie film, you may need to edit the 3. Understand the Format
film and the trailer yourself based on budgetary limitations, and Not all trailers are created equal. There’s certainly some room for
that’s perfectly fine. You just need to treat those two parts of the creative flexibility in the cutting room. You can always break the
process as independent projects and tap into different skill sets to rules or use a less-traditional method for getting your vision across.
get the job done. That can be done in a straightforward way by
following these five film trailer editing tips: One example of this might be to take a single moment or scene from
your film and let it play out. Rather than showing the whole picture
1. Only Use the Best of the Best of what the film is about, this strategy is all about creating a mood or
If you are cutting down a 100 minute film into a 2 minute trailer, you texture that teases the audience without giving away many story
have no reason to use anything but the absolute best footage. This details. The infamous first Cloverfield trailer is a perfect example of
may sound like a no-brainer, but many indie filmmakers are afraid to this technique.
use their best material in the trailer, as they don’t want to give
There’s really no one specific format or formula that works best for
anything away. You don’t need to give away major plot points or the
trailer editing, but you do need to identify which approach you want
twist at the end of your film, but don’t be too precious with your
to take before you start cutting. If you go in blindly, it would be like
material.
shooting your film with no script. Know which format works best for
Remember that the best footage will draw the biggest audience, so your trailer, and choose your scenes and moments wisely so that
make sure that every last shot and scene that you show represents they fit within those parameters.
the best the film has to offer.
4. Use Multiple Music Cues
2. Prioritize the First Half of the Film Two and a half minutes might not seem like a lot of time, but in the
Although you can certainly get away with using scenes from any part context of a trailer — it can be a lifetime. Assuming you have cut
of your film, focus primarily on the first half. In most films, Act 1 and together a wide variety of material and your trailer has some sort of
Act 2 contain the best trailer moments. Act 1 is the setup, so arc to it, it’s going to need more than one music cue to bridge
naturally you are going to want to include enough scenes from there together each beat.
to help ease the viewer into your story.
Think of your trailer as a miniature film. Would you use the same
And the beginning of Act 2 typically focuses heavily on the premise music cue for your entire feature film? Probably not. So why use a
of your film – or the hook that’s going to sell tickets. You want to give single cue for your trailer, which is essentially a short film in itself?
away enough of your film that it accurately represents the story, but You don’t need to go overboard, but using two or three cues
not so much that the viewer feels like they’ve seen it all. That’s why tastefully to help guide the different beats in your trailer can be very
focusing on the first half is usually a good rule of thumb. helpful.

226
5. Keep the Logo Short
This is a small but important point. Always keep the production
company logo up front as short as possible – or don’t have it at all.
Having 15 seconds of a logo up front (from a company that no one
has ever heard of) can come across as unprofessional. If you want to
include your logo, that’s completely fine. But limit the screen time to
a couple of seconds at the most so you can get into the meat of your
trailer.

227
SECTION 5

Four Tips on Integrating Action Cam Shots With Cinema Footage

Embarking on a multi-camera video shoot? Here are four tips on how to ‘trick’ your audience by effectively mixing GoPro shots with cinematic footage.

GoPro has come a long way since the first version was released back had before. But the thing to remember: cinematographers don’t
in 2004. Until the last few years, the pint-sized cameras were use simply strap the GoPro to just anything and let it go. They plan and
sparingly (if at all) in Hollywood and professional productions. But test certain shots to ensure the cams are being used effectively.
that all changed with the GoPro HERO 3 & 4 series. In fact, GoPros
Here are four tips that will allow you to integrate your GoPro
were the go-to camera for documentary films like 2012′s
footage with cinematic footage:
‘Leviathan’, which used GoPros almost exclusively to capture a
commercial fishing boat at sea. 1. Coverage
Now these nearly indestructible cameras are being fitted to just Whether shooting for sports, nature, documentary, or feature film,
about everything, giving the audience a point of view we’ve never you’ve got to have a group of shots that give a sense of space that

228
you can cut to, also known as coverage. With this in mind, many 4. Let’s Clean Things Up
filmmakers are using GoPros, specifically in actions sequences. Another way to effectively integrate GoPro footage with cinema
footage is to run post processes other than grading. For example, the
Having the option of several angles in post-production allows the
GoPro footage shot in ‘Need for Speed’ was run through an After
editor to find footage that will cut seamlessly with the main cinema
Effects plugin called Dark Energy by Cinnafilm. This plugin allows for
footage.
noise and film-grain reduction or additive. Dark Energy was used
2. Film Flat specifically to clean up the GoPro footage and to bring in the natural-
The GoPro has a setting called Protune. The adjustments that can be grain look that’s closer to the Canon C500 and ALEXA footage that
made here are minimal, but really effective. You can adjust white was shot for the rest of the film. Currently though, Dark Energy is
balance, ISO, sharpness, and exposure. On top of this, you can set the only available as a plugin for the Windows version of After Effects.
color to flat which captures more shadows and highlights detail. A
flat image can be matched to your cinema footage through standard
color grading processes.

3. Narrow and Wide

When setting your format, whether it be 1080, 2.7k, or 4k, you have
choices. These options allow you to capture video in either a narrow,
medium, or wide angle. Using a narrow or medium angle will allow
you to mix your footage more seamlessly with cinema footage
(Camera A), but even using 4k with the wide angle will work in many
cases. As Wolf Creek 2 cinematographer Toby Oliver said…

“If you have a 4K file in post you can zoom in to find a tighter frame and
lose the fish-eye feel, without sacrificing resolution.”

In films such as 2013′s ‘Into the Mind’, the crew used the GoPro
HERO 3 alongside RED Epics and utilized both the narrow and wide-
angle feature. By using the GoPro they were able to capture intimate
timelapses as well as in-your-face action sequences. While the wide-
angle lens will usually reveal the GoPro’s presence to the audience,
limiting its use can be extremely effective and work alongside
cinema footage without issues.

229
SECTION 6

Tips For Optimizing Your Computer for 4K

Video editing in 4K? Here’s a few technical considerations for optimizing your machine.

Last year I made the switch to shooting and editing videos in 4K. I Lighting Fast Storage
quickly realized that in order to work efficiently in post, I would For internal memory you want a solution that will process data
need to do a major computer upgrade to handle the increased file quickly. These days an SSD is your best option. SSDs have no moving
size of the 4K video format. parts, so they are less prone to failure and are quicker than
traditional hard drives. It’s worth noting that different drives have
From my own experience, I’ve compiled four crucial technical
different transfer rates. A drive that can effectively do this is the
considerations every video editor should make before making the
Samsung 1TB SSD which runs at 540MB/s. You’ll need to shell out
jump to 4K video.
more than double the money for a SSD, but it’s worth the
investment for pro users.

230
Expand Your Brain
You don’t have to go crazy with your computer’s processor, but you
want one that is solid and can run multiple tasks with relative ease.
Intel is currently in both Mac and PC. With Intel you have two clear
cut choices: the Intel i7 and the Xeon e5. (Info Current as of 2016)

You can go either way here. Both the Xeon e5 and the i7 will give you
the processing power you need to get the job done. The Xeon e5 is
rated just a little better than the i7 and packs a little harder punch —
but it’s also around twice the price.

Boost Your Memory

There’s one thing above all else to consider when editing and
running software like Premiere Pro CC, Avid, and FCPX: memory.

Programs like those listed above use up a lot of memory to process

your work, especially if you’re processing and rendering high-
resolution video. Boost the RAM memory to increase your
processing power. You’ll rarely see a professional editor with less
than 16GB of memory in their editing computer.

Max the Graphics

Graphics are just as important as processing power and memory
when building a computer for video editing. Processing 4K will
require a lot of GPU (Graphics Processing Unit) so you’ll want to find
a solution that gives you at least 1GB of memory.

Remember: the only Macs that you can upgrade after the fact are the
older Mac Pro Towers 2008-2012.

231
SECTION 7

Dissecting the Hipster Look

Take an ironic look at ‘hipster’ style color grades.

With Instagram being over 5 years old, I think it’s safe to say What is the Hipster look?
hipster-style photography and filmmaking are more than just a fad. Instead of simply telling you what makes up the hipster look let’s
take a look at a few examples.
Although a ‘hipster look’ can add some style to your videos, many
filmmakers don’t think through their color grading process any
deeper than simply adding a preset. In the following section we’ll
take a deeper look at the characteristics of an Instagram/hipster
color grade, how it mimics the look of some analog film, and
demonstrate a potential workflow for achieving this look.

232
1. Vignetting 3. White is Grey

Most (if not all) hipster color grade photos feature vignetting in Hipster photography typically maps the white parts of the image to
some form or fashion. Sometimes vignetting is created simply from be more grey. This often results in hipster grades making the image
the layout of elements in your scene and sometimes it needs to be darker than it originally was.
added in post.

4. Blacks are Dark Grey

2. Crushed Blacks

Most hipster-style images feature more detail information in the

After the blacks have been crushed, they are usually lifted to become
midtones and highlights and less in the black parts of the image. This
dark grey instead. This makes the entire image look more ‘milky’.
is known as crushing the blacks.

233
5. Blues in the Darks, Yellows in the Lights The most vibrant parts of hipster images tend to be the yellows and
the magentas.
Most hipster grades feature more blues in the darker parts of the
image and more yellows in the lighter parts of the image. Keep in 7. The Image is Soft
mind that these are usually subtle tweaks that complement the
As you probably already know, digital cameras tend to be much
image, not take away.
sharper than film cameras. Sharp video isn’t common in most hipster
color grades, as it makes your image look too mechanical. You can fix
this by adding small blurs and noise to your images.

Hipster Grading in Action

Now that we’ve broken down what makes up a hipster grade, let’s
take some of the things we learned and apply them to an actual
6. Desaturation photograph in After Effects.

1. Create a Vignette

The first step is to add a vignette to the image. In this particular case,
it seems like there is a lot of brightness in the left area of the frame
Most hipster photography/filmography doesn’t have vibrant colors.
and a little too much attention being drawn to the guys arm. To fix
This is probably because hipster grades try to emulate film, which is
this problem we will create a new black solid and drop the opacity
simply not as vibrant as digital, especially if it has time to decompose.

234
down to 30% so we can see our image underneath. You don’t have to 4. Adjust the Black Point
make your vignette an ellipse. If you prefer you can use your pen to
feather it out until you get a well balanced image.

2. Crush the Blacks

Now do the opposite for the black parts of the image. Grab the
bottom left point in your curves effect and drag it up and to the right.
This will make your black points a shade of grey rather than simply
Create a new adjustment layer and add a levels effect. After Adding black.
the levels, grab the left arrow and drag it to the right until the dark
5. Adjust the Blue Curve
parts of your image are crushed. Also, make sure your adjustment
layer is positioned over your vignette.

3. Adjust the White Point

You can add yellows to the highlights and blues to the darks by
adding an “S” curve to the blue channel. To do this simply click the
dropdown box that says RGB and select blue. Now you can adjust
Now add a curves effect to your image. Bring down the white points the curves to create a backwards “S” shape in the image.
so they are light grey instead of white. You can do this by simply
drawing the top right corner of the RGB curves bar down and to the
left.

235
6. Desaturate

This is, of course, just one example of how photographers and

filmmakers give their images a hipster style.
Next add in the “Hue/Saturation” effect to the adjustment layer.
Bring down the saturation point just a little. A number around -10
works nicely.

7. Soften

Most digital images tend to be sharp and mechanical. You can fix this
by simply softening the image just a little. Adding a gaussian blur and
setting the blurriness to “1” will work just fine.

There you go! Using just a few simple observations, you can create a
hipster-style image in no time. Try playing around with these
different effects to get different results. Adding things like grain and
light leaks can give your images a hipster look as well.

236
SECTION 8

How to Find Your Story When Cutting a Documentary

The process of cutting together any type of feature-length film can be crazy. But it doesn’t have to be.

In a lot of ways editing a documentary is much more difficult than a an organized project file with bin, shots, and takes labelled
narrative. Documentaries find their voice in the editing bay, so if appropriately. But in order to really stay on top of things, the
you’re looking to craft an engaging story there’s a few things you organization needs to extend beyond the project file.
must always do. Here are a few essential tips for finding your story
Files and folders should be organized just as well on your hard
when cutting a documentary.
drives in order to avoid offline media and workflow issues when
Insane Organization sending your project out for sound/color/VFX. I also recommend
Since shooting ratios on documentaries can be ridiculously high organizing and logging all interviews as meticulously as possible
(sometimes 100:1 or higher), staying organized is one of the best within your project in order to streamline your process for recutting
ways you can make your job easier throughout the editorial process. interview segments later on. For instance, you might want to add
The vast majority of editors understand that it’s important to have markers to sequences with synced interviews in them and label

237
each marker with the interview topic. It will take some more legwork from square one. Tackle the material that speaks to you and inspires
up front, but can save you hours and hours of sifting through footage you the most. Doing so will lead to further inspiration once you start
later on. hitting the next few scenes and sequences.

Plan Ahead, Then Work from Instinct Get a First Cut Done Quickly
Although it’s tempting to wait until you’re in the editing room to If you’ve ever cut together a feature documentary before, you know
start conceptualizing the exact edit and flow of the story, putting in very well that the final cut often looks nothing like the first cut.
the early legwork will pay dividends when you jump into the edit.
Documentaries typically have far more revisions than narrative
It’s usually best to work with the director and crew before shooting films. Since there’s so much footage to pull from, each revision looks
in order to insure that the film is being shot with editing in mind. that much different. The point being that your first cut doesn’t need
Similarly, you should then be able to go into the edit knowing the to be perfect... it’s going to change immensely anyways.
director’s exact vision. It’s typically not possible for the you, the
The first cut is really just a mold at which you can start chiseling
editor, to be present for all the shooting, so let the director know
away. It’s better to have that mold ready sooner than later so that
what you would like from the shoot – the good takes, the blown
you can tear it down, rebuild it, and do it all over again, as opposed to
takes, b-roll, etc. This will be immensely helpful when you start
trying to make that first cut perfect and then becoming frustrated
logging footage.
when it needs to get recut.
Based on how good the on-set notes are, and how much time is
Even if you believe you can make a near-perfect first cut, your
allotted for the edit, it’s often worthwhile to do a rough paper edit.
director, producer, sales agent, or whoever else might have a say in
Working with a director in this stage will make the edit go smoother,
the process may very well feel differently.
as you’ll have a clearer idea of their vision based on the footage that
was captured. It’s also useful for knowing what still needs to be shot. The best thing you can do is get through your first cut as quickly as
Get those Post-It-Notes ready and map out a rough story structure. possible (which, by the way, also forces you to work on your
instincts) and then start refining things from there.
Once you get into your editing app, there’s no exact formula for
cutting a documentary. One popular approach is to cut the bulk of
interviews together first as a starting point and working out from
there. If you’ve gone through the footage and one particular moment
really sticks out to you – maybe consider cutting that first, and then
working the other scenes around it, assuming it’s a pivotal moment.

Or maybe you have a vision for a beautiful opening montage and are
able to build out the first act completely sequentially by starting

238
SECTION 9

5 Ways Music Is Misused In Films (and How to Do Better)

Music can drive your story and enhance the message of your film, but the process of marrying the two is often underestimated.

Music can literally make or break any narrative film, commercial 1. There’s Wall to Wall Music
project, or documentary purely by the way it’s used. Music can In some rare cases, films can benefit from having a musical score
evoke powerful emotions in the viewer. playing from wall to wall. That said, this is usually a terrible idea and
one of the most common music-related faux pas found in indie films
Many years ago it wasn’t unusual for an offline editor to complete
– particularly in short-form content. Like any other creative
the entire picture edit with no music at all, but it’s become quite
element, music needs to be balanced in a way that allows for
common for editors to work with existing music cues or temp tracks.
contrast. When there’s a constant stream of music playing, there’s
This can be an extremely efficient way to work... if you know what
no breathing room to allow the viewer to sink into a different mood
you’re doing.
and then appreciate the musical score when it comes back in again.
Unfortunately, many editors fall into traps and ultimately don’t Instead, the music simply becomes background noise. Any potential
make the most out of their ability to cut to music.

239
emotion that may have been evoked as a result of the score becomes 4. The Length of the Cue Isn’t Right
diminished by its over-usage. When working with pre-existing cues, it’s common for an editor to
pick a cue based on the overall sound, but not consider the length of
2. The Cues Don’t Match Each Other
the cue itself.
Editors today have amazing access to vast music libraries that allow
them to pull beautifully composed scores into their project files with The fact that a cue might sound right for any given scene is a great
only a few clicks of the mouse. starting point, but there are many other considerations that come
into play to ensure that it will truly work for the scene — the biggest
The issue, however, is that some editors don’t take enough time with
of which is duration. Having a cue that’s too long isn’t typically a
the music selection process and end up choosing cues that don’t
huge issue, as it can be faded in or out as needed to compensate for
seem to gel at all. If you’re an editor that’s going to be purchasing or
length... but having a cue that is too short can become problematic.
licensing music online, you need to think like a music supervisor.
One of two things will happen when editing to a music cue that is just
Don’t simply purchase tracks like you’re making a mixtape — curate
a bit too short: 1. The cue won’t cover the entire scene and may drop
them like you’re creating an album. It’s completely fine to mix and
off at the wrong point, or 2. The editor may be tempted to shorten
match different genres and styles, but you always need to find some
the entire scene to match the cue. Both of these scenarios can be
sort of common thread (whether it be the instrumentation, style,
problematic, so it’s critical that you always ensure the duration of
mood, etc.) that binds them all together. If not, your final piece may
your track is sufficient above all else.
feel unfocused and uninspired.
5. The Musical Theme is Too Repetitive
3. The Music Contrasts the Pacing of the Scene
The final issue common among films with soundtracks is the
Being a good editor comes down to understanding pacing. This is
repetition of a theme. While it can be a nice technique to have a
true not only of the pacing of edits within a scene or sequence, but
recurring theme in a film (musically speaking) and have it drift in and
the pacing of the music as well. It’s always surprising to see how
out during different moments of the film to help anchor things, it
many editors have a great understanding of pacing (and place a huge
really only works well in certain instances. More specifically, in order
emphasis on it during their picture-editing process), but don’t take
for this technique to really be effective, there’s a definitive limit to
that same level of care when it comes to the music.
how often the same cue can be used. So many indie films make the
The viewer suffers when a beautifully edited scene gets destroyed mistake of using the same cue over and over again, which inevitably
with a poorly chosen music cue that completely contrasts the pacing makes it feel really tired, really fast.
of the scene. In some cases, it can be a strong stylistic choice to
The other consideration is that even films that use a repeated
create a contrasting musical effect. For instance, an extremely slow-
musical theme well will typically change that theme slightly each
paced cue might underscore a fast-paced action sequence, but it just
time it comes in. These films might change up the instrumentation,
doesn’t work in the vast majority of scenarios.

240
key, tempo, or other variables to ensure that the musical theme feels
fresh each time it’s used.

241
SECTION 10

How to Pick the Right Tone, Shots, and Music for Trailers

Inception horns or no Inception horns? Creating an awesome trailer is an art form and much more difficult than it looks.

If you’ve spent hundreds of hours working on a film, it makes no a better idea for the type of material with which you will be working
sense to skimp when it comes to editing the trailer. There are a lot of with. While you can certainly get an idea of what the film is about by
things to remember when cutting trailers. scrubbing through, you won’t catch the subtle nuances that make
for a great trailer that can be found when watching it through as an
Let’s take a look at how to create a good trailer and the role of music
audience member.
at a fundamental level. So whether you’re looking for royalty free
trailer music or simply want to learn more about cutting trailers, One way to do this is to watch the film and set markers in the
here are a few tips for your next big trailer project. timeline at points in the film that would make for a good trailer shot.
To help with this, most NLEs will allow you to set markers on the fly
Step 1: Watch the Film during playback. Even if you spent countless hours already editing
As with most editing, the best way to start editing a trailer is to sit the film, it’s best advised to review the film once you’re ready to put
down and watch the entire film first. In doing so, you’ll be able to get

242
yourself in “trailer mode.” The secret here is perspective. Don’t view the actual film. Essentially you are eliminating the audience’s need to
your film as an editor during this phase, view it as an audience go see the film.
member. Ask yourself:
A contemporary trailer generally has five parts which are typically in
• What is going to make people excited? the following order:

• Is there something that people haven’t seen before? 1. Start With a Scene From the Film

• Do any shots have shock value? Most modern trailers start off with a very interesting scene from the
film. The goal of the introduction scene is to establish the tone for
• What will draw the largest audience?
the film/trailer. If the scene is strong enough (as it should be), your
Music should not be a big consideration at this point. This phase is all audience should want to keep watching instead of clicking on the
about figuring out what your trailer can be. recommended cat video next to it.

Step 2: Define Your Narrative 2. Define the Setting

Toward the front of most trailers, a setting is defined in one way or

another. One way is to simply have titles pop up on the scene.
Another is to have your characters define who they are. Typically
you will find perfect setting-defining V/Os in the early part of your
film. Another option would be to hire a professional voice actor to
define the setting — but be wary. This “In a World…” style of trailer
The next step is to figure out the way in which your trailer is going to has become almost a parody in itself.
be structured. In other words, how is your trailer going to tell a
3. Character Introduction
story? Trailers come in all shapes and forms. From a simple clip
directly taken from the movie — like Cloverfield — all the way to a In most modern films, characters are introduced using a series of
narrated introduction (every 90s trailer ever). sound bites from the film. Its in these early stages that you will
In terms of the classic ‘Hero’s Journey’ form of storytelling, your introduce your character before they’ve undergone their
trailer should feature the first and second acts of the story with only transformation. You don’t want Shia Lebouf thrusting an Allspark
hints about the third. This is why it’s so frustrating as an audience into Megatron. You want the scrappy kid who is in over his head.
when you see clips from the climax of a movie (Act III) in the trailer. If
you give away the ending, you’re taking all of the narrative joy from

243
4. Plot Introduced Standard Narrative

Unless you just so happen to have your plot spelled out in the film, As stated earlier, a “standard” trailer is a trailer that follows a
this will be the hardest part. In a nutshell, you want to explain the traditional trailer story arc: Introductory Scene, Establish a Setting,
plot while building up your audience’s excitement. Introduce Characters, Define the Plot, and Hook the Audience.

5. Hook Music-Driven Trailer

The last goal of your trailer should be to leave your audience wanting Having great music in your trailer is a must. Sometimes music can be
more. This is done by creating a cinematic hook. There are many the thing that drives the trailer, rather than the other way around.
ways to do this. From visually stunning montages to a funny one- Lots of care needs to be given when looking for the right music for
liner, it just depends on what you want your audience to remember. you trailer.

Step 3: Figure Out Your Trailer Style Complex Narratives

There’s no right or wrong way to create a trailer, just like there’s no
Trailers don’t need to have the same narrative structure every time.
right or wrong way to structure a film. But you should make it your
At the end of the day, a trailer is simply a tool to get butts in seats.
goal to appeal to the biggest audience possible. At the end of the day,
Sometimes a traditional trailer structure simply won’t do and you
the trailer needs to convince your audience to see your film. While
will need to venture into something a little more complex. Just
not every trailer will fall into one of these categories, most film
remember, when working with more complex trailers, it’s advised to
trailers can be defined as one of the following:
write out an outline.
Teaser
Many editors will skip defining a narrative and instead find epic
A teaser is much different than a traditional trailer. A traditional trailer music and try to simply insert clips into it. While this strategy
trailer explains the plot through a narrative structure, but a teaser is isn’t horrible, in many cases it doesn’t lead to the best trailer
more like a taste of what the entire movie will be like. Teasers are possible. Music selection should occur only after you pick how your
typically extended clips from a film with light transitions between trailer will be structured.
them. A teaser can be a great way to keep your audience excited
Step 4: Pick the Music
during the post-production process.
Picking the right music is one of the most important parts of the
trailer process. Ideally, once you get ready to pick the right music,
you will have an idea about the type of music that you will want in
your trailer. If not, take some time, watch trailers that you like, and
get an idea for the type of music you will need.

244
While it’s probably impractical to get a composer to create
something for you, there is a great tool out there called (you guessed
it) PremiumBeat.com. PremiumBeat has thousands of songs that are
perfect for trailers — and the best part is PB has sections and
playlists already set up to help you find the best royalty free music
for your trailer.

Remember: you want to pick music that plays into the narrative structure
of your trailer. So if your trailer takes time to get to the hook, you might
want to lay off the Inception horns.

Conclusion
At the end of the day, a good trailer is all about getting an audience
excited to see your movie. While there are many different ways to do
this, the concepts outlined in this article should be a great jumping
off point.

245
SECTION 11

The Hidden Stories Behind Weird Post-Production Terms

Ever wonder where some of those strange post-production terms came from? Here are some origin stories you might not know.

The industry is full of strange and confusing terms that make sense In the golden days of animation, every frame had to drawn by hand
only to those who use them everyday. Have you ever wondered — but it wasn’t the job of lead animators to draw every frame.
where all these strange terms came from? Let’s take a behind-the- Instead, more experienced animators would draw only the ‘key’
scenes look at the origin story behind those weird post-production frames in a scene and more inexperienced animators
terms. called “inbetweeners” would create the drawings between the key
frames.
Keyframes
In modern animation applications, a keyframe designates a value at For more information regarding early animation techniques, I highly
a certain point in time. These modern day applications can interpret recommend checking out ‘The Illusion of Life’ by Frank Thomas and
the data between keyframes so you don’t have to. This is called Ollie Johnston.
tweening, and it’s a recent advance in technology.

246
Masks matte paintings were scenes painted on glass using, you guessed it,
In post-production, masking is the process of designating a portion matte paint.
of the frame to not be affected by a given effect. In Photoshop you
Over the years, mattes would evolve to become modern-day color
might use a mask to only blur out a background and not your subject.
keying, but digital matte painting continues to be a process used in
In After Effects, a mask can be used to help with compositing 3D
contemporary films.
elements. But the history of masks goes back much further than
Photoshop. In fact, the term is derived from physical masks Rotoscoping
which literally block portions of your face. Rotoscoping is essentially cutting an object or subject out of a scene
one frame at a time by hand. While the process is easier for modern
Masking has long been used in fine arts as a way to shield portions of
filmmakers, it’s still very tedious.
a canvas from being affected. In fact, masking tape found its
name because it was used to mask out certain objects that weren’t In the early days of film, an artist would use a rotoscope to project a
meant to be painted. Today masking has evolved to become an frame onto glass. The artist would then go in and trace the subject by
essential part of a digital artist’s workflow and it all started with hand. While the process was traditionally used for cartoons, it has
physical art. transitioned over time to be used mainly for VFX work.
Feathering
In modern software, feathering is essentially the smoothing out
of edges. But why is it called feathering?

It actually plays homage to a classic painting technique in which

artists would use feathers to smooth out a transition between two
colors. Feathering was also used by early photo editors as a way to
smooth out ink. Even in modern home painting, some people use
feather dusters as a way to smooth out paint color transitions.
Feathering continues to be an essential process for editors and
motion graphic designers alike.

Matte/Matte Painting
In film and photography, a matte is reference footage used to
composite a foreground onto a background. While the history of
mattes in film is quite dense, the term matte first originated from the
early set extension process known as matte painting. These early

247
SECTION 12

5 Editors That Broke the Hollywood Studio System

As the Hollywood studio system began to crumble, these editors turned a new generation of young filmmakers into household names.

In the late 1960s, the United States of America found itself in a some of the most praised work in American cinema. They were the
transitional stage. The younger generation had attached themselves editors of New Hollywood.
to art, music, and film. Young filmmakers were unlike any directors
before them. They had grown up with movies and meticulously Anne V. Coates
studied them. By the 1970s, these young directors were breaking Anne Voase Coates had dreamed of working in film. Her uncle, J.
box office records. Arthur Rank, was a founding member of Pinewood Film Studios. His
company, the Rank Organization, also controlled Denham Film
Names like Scorsese, Spielberg, and Lucas became legendary after Studios and the Odeon Cinemas chain. Rank was a devout
this period. Behind those directors were some incredible editors Methodist, who produced many religious films.
who were also breaking traditional molds. Following the footsteps
of the pioneering women in film editing, these women would cut Anne had expressed her desires to work in film, but her uncle had
reservations. He attempted to break her spirits by having her cut

248
many of the religious films he was producing. His hope what that she Academy Award for Best Film Editing. Lawrence of Arabia was
would lose interest in the industry and return to her work as a nurse. nominated for ten Oscars, winning seven.
However, Anne found the work invigorating. She fixed film prints of
Two years later, Anne was nominated for her second Academy
religious short films and sent them on various British church tours.
Award for her work on Becket.
“There were some wonderful women editors who helped inspire me to go
“There are nonlinear small things in my editing sometimes that you might
into editing in England. In a way, I’ve never looked at myself as a woman
not even have noticed. I started jump-cutting from one place to another
in the business. I’ve just looked at myself as an editor. I mean, I’m sure I’ve
quite a lot. When I was editing ‘Becket,’ the producer, Hal Wallis, said,
been turned down because I’m a woman, but then other times I’ve been
“You can’t do that. You can’t cut from this shot to that shot without a
used because they wanted a woman editor.” – Film Sound
dissolve as they are 50 miles apart.” I said, “Guess what? I’ve done it and
Her passion landed her a job as an assistant film editor at Pinewood it works perfectly.” And it’s still in the film.” – Editors Guild
Studios. The first film she worked on was The Red Shoes for director
She received her third Oscar nomination for the 1981 film The
Michael Powell in 1948. She worked under editor Reggie Mills, who
Elephant Man. The film was a challenge, as producer Mel Brooks
despite not talking much, taught Anne a tremendous amount of
didn’t want the audience to see the Elephant Man’s face until later in
discipline when it came to editing a film. Mills would go on to win the
the film.
Academy Award for Best Film Editing for The Red Shoes. By 1952,
Coates would receive her first credit as an editor for The Pickwick By the 1990s, the changes in the film industry meant that Anne
Papers. would have to learn an entirely new editing process.
In 1962, Anne V. Coates would work with director David Lean “When Frank Marshall and Kathleen Kennedy offered me ‘Congo,’ they
to masterfully edit the epic film Lawrence of Arabia. The film was an said, “Well, you have to do it digitally because the special effects system
astronomical success, and the editing techniques used by Coates are couldn’t do it otherwise.” So they had me taught on Lightworks. . . It’s just
still studied and used today. another tool, really. Once I got that in my mind, I progressed faster. And
then, when I did ‘Out of Sight,’ Steven Soderbergh had a sound man who
“I suppose the most challenging film I cut was ‘Lawrence,’ because we had
could link up with an Avid [Media Composer] but not with a Lightworks. I
such a huge amount of film – I believe it was 31 miles! – which gave me
moved then from Lightworks to Avid, and I’ve stayed on an Avid ever
an abundance of choices.” - Turner Classic Movies
since.” —Editors Guild
The most famous edit in the film is the literal match cut. The film cuts
Anne V. Coates is still working in the industry, recently surpassing
from the image of a match to the sun over the Arabian desert.
the length of Margaret Booth’s storied career. She just completed
Coates worked seven days a week for four months to complete the 2015 blockbuster film ‘Fifty Shades of Grey.’
Lawrence of Arabia on time. Her worked paid off, as Anne won the

249
To date she has been nominated for five Oscars, winning one. She In 1980, Scorsese called upon Schoonmaker to edit his film Raging
has also a member of the Order of the British Empire. Bull. Initially she had to decline, due to the fact that she was not a
member of the Editors Guild. Apparently her work and friendships
Thelma Schoonmaker over the years played in her favor, as the union was influenced to
While studying at Columbia University, Thelma offer her membership. Schoonmaker finally joined the Motion
Schoonmaker answered a New York Times ad for an assistant film Picture Editors Guild and got to work on Raging Bull.
editor. She would cut successful European films to fit US broadcast
time standards. In that job, she learned the art of negative cutting. 10 years after her original Academy Award nomination,
Schoonmaker was once again nominated for Best Film Editing, this
Schoonmaker then signed up for a six-week filmmaking course at time taking home the Oscar for Raging Bull. Schoonmaker went on to
New York University (NYU). It was there she met a young Martin edit every single Scorsese film since.
Scorsese. Scorsese was struggling to finish his short film, What’s a
Nice Girl Like You Doing in a Place Like This? Not only did Scorsese help Schoonmaker achieve success as a film
editor, he also introduced Schoonmaker to her husband, director
A professor asked Schoonmaker to help Scorsese finish the film, and Michael Powell. Powell was the director of the previously mentioned
thus started the legendary Hollywood duo. She would edit film, The Red Shoes. Powell was also a great influence on Scorsese,
Scorsese’s first feature film, 1967′s I Call First, renamed Who’s That who had studied Powell’s films. After Michael Powell’s death in
Knocking at My Door. 1990, Scorsese and Schoonmaker would go on to preserve his
In 1970, Thelma Schoonmaker edited Woodstock, the documentary memory by restoring his films.
on the famous American music festival. The film showcased the In 1991, Thelma Schoonmaker received her third Oscar nomination
performers through a series of superimpositions and freeze frames. for her work on Scorsese’s Goodfellas. Though Goodfellas was
The film earned Schoonmaker her first Oscar Nomination for Best nominated for six Oscars, only Joe Pesci won an award.
Film Editing, a nomination rarely awarded to documentary films. (In
1996,Woodstock was selected for preservation in the United In 1995, Schoonmaker oversaw the Scorsese documentary A
States National Film Registry by the Library of Congress.) Personal Journey with Martin Scorsese Through American Movies, which
was a part of the British Film Institute’s celebration of the first 100
Even though Schoonmaker earned an Academy Award nomination years of film.
for her editing, she was unable to join the Motion Picture Editors
Guild. To acquire union membership, Schoonmaker would have to Schoonmaker garnered her fourth Academy Award nomination for
first work as an apprentice and an assistant. She refused to do so, Gangs of New York. Two years later she won the Academy Award for
and was thus forced to work on a series of small films and Best Film Editing for The Aviator, and two years after that she won
documentaries for the next decade. another Academy Award for Best Film Editing for The Departed. Her
most recent Oscar nomination was for Hugo.

250
Thelma Schoonmaker’s seven Academy Award nominations for Best would become her most famed use of quick-paced editing. In less
Film Editing are the second most nominations in Oscar history. She than a minute, Allen cuts over 50 times during the ambush scene.
trails Michael Kahn by one nomination. Schoonmaker is currently
In the 1970s, Allen would often collaborate with director Sidney
tied with legendary editor Barbara McLean.
Lumet, editing his films Serpico, Dog Day Afternoon,and The Wiz. Dede
Dede Allen Allen earned her first Academy Award nomination for Best Film
Dorothea Carothers “Dede” Allen began her career at Columbia Editing for Dog Day Afternoon.
Pictures in the 1940s. She first started as a production runner,
Warren Beatty, who had talked to Dede Allen about journalist John
eventually working her way up to sound librarian and eventually
Reed during the production of Bonnie and Clyde, brought Allen on to
assistant film editor in the special effects department.
edit the 1981 film Reds. It took two and a half years for her to finish
One of her first projects as an editor was the 1959 film Odds Against the film, longer than any other film she had worked on. The John
Tomorrow, which was directed by Robert Wise. Wise served as Reed story earned 12 Academy Award nominations, including a
Allen’s mentor, often encouraging her to experiment with her second Oscar nomination for Best Film Editing for Allen.
editing. Wise was an editor turned director; he edited the legendary
In 1985, Allen edited the John Hughes classic The Breakfast Club. She
masterpiece Citizen Kane.
also edited The Addams Family in 1991. In 1992, Dede Allen
In 1961, Dede Allen edited the hit film The Hustler starring Paul accepted the role of head of post-production at Warner Bros. She
Newman. (The film’s sequel, The Color of Money, was directed by would return to editing in 2000 with the film Wonder Boys, which
Martin Scorsese and edited by Thelma Schoonmaker.) Dede Allen garnered her third and final Oscar nomination. Dede Allen died in
later collaborated with Paul Newman on Rachel, Rachel, Slap Shot, 2010 at the age of 86.
and Harry & Son.
Verna Fields — “Mother Cutter”
As the Hollywood studio system crumbled, film editors took on a
much more significant role than ever before. Traditionally, editors Verna Fields began her film career as a sound editor in the late
were studio employees that did not need attribution for their work 1950s and early 1960s, working on films like El Cid. By the
on any particular film. This all changed in 1967, when Dede Allen mid-1960s, she was teaching film editing at the University of
became the first film editor to ever receive a solo opening credit on a Southern California (USC). She would also edit occasional projects,
film. The film just happened to be her most renowned and praised like The Legend of the Boy and the Eagle and Targets.
work – Bonnie and Clyde.
In 1968, Fields made her directorial debut with the
Dede Allen’s work broke from standard Hollywood editing documentary Journey to the Pacific. Verna Fields hired two editors to
techniques. She implemented the use of jump cuts, or would open a help her with the documentary, George Lucas and Marcia Griffin.
scene with a close-up. It would be the finale of Bonnie and Clyde that George and Marcia married in 1969.

251
Impressed with her work as a sound editor on his film Targets, Anymore and served as Scorsese’s supervising editor for Taxi Driver
director Peter Bogdanovich asked Fields to edit his films What’s Up, and New York, New York.
Doc? and Paper Moon. At the same time, George Lucas had Verna
In 1977, the world was introduced to Star Wars. Directed by George
Fields and Marcia Lucas edit his film American Graffiti.
Lucas, the film was edited by Marcia. Not only did Marcia serve as
Both Paper Moon and American Graffiti were nominated for the 1974 the films editor, she helped rewrite the piece. In an interview with
Academy Awards. Paper Moon received four nominations. American Rolling Stone, George Lucas said,
Graffiti earned five nominations, including Best Film Editing
“I was rewriting, I was struggling with that plot problem when my wife
for Verna Fields and Marcia Lucas.
suggested that I kill off Ben, which she thought was a pretty outrageous
That same year, Fields began editing the The Sugarland Express, the idea, and I said, ‘Well, that is an interesting idea, and I had been thinking
directorial feature film debut of Steven Spielberg. For her skill and about it.’ Her first idea was to have Threepio get shot, and I said
attention to detail, Fields became endearingly known as ‘Mother impossible because I wanted to start and end the film with the robots, I
Cutter.’ wanted the film to really be about the robots and have the theme be the
framework for the rest of the movie. But then the more I thought about
Even though she was surrounded by up-and-coming talent, Verna
Ben getting killed the more I liked the idea.”
Fields edited her last feature film in 1975. She worked on Spielberg’s
next film – Jaws. Verna Fields would absolutely go out at the top of Marcia was also crucial to the film’s climactic Death Star finale. To
her abilities, as Jaws is an absolute master class in editing. build the tension the original sequence lacked, Marcia had to re-
order the shots from the beginning. She told George:
Verna Fields won the Academy Award for Best Film Editing for Jaws,
beating out Dede Allen’s Dog Day Afternoon. “If the audience doesn’t cheer when Han Solo comes in at the last second
in the Millennium Falcon to help Luke when he’s being chased by Darth
Following the success of Jaws, Verna Fields became the Vice-
Vader, the picture doesn’t work.”
President for Feature Production at Universal Studios. She remained
in that position until her death in 1982. Her intuition proved right, as Star Wars was not only a blockbuster
hit, but also a hit with the critics. Marcia Lucas won the Academy
Marcia Lucas Award for Best Film Editing for her work on Star Wars.
As previously mentioned, Marcia Griffin married George Lucas in
1969. She worked as an assistant editor on THX 1138 and The Marcia would go on to edit Star Wars: Episode V – The Empire Strikes
Candidate. Marcia Lucas would then collaborate with Verna Fields on Back and Star Wars: Episode VI – Return of the Jedi. Those would be the
American Graffiti, earning her first Oscar nomination. final films she would ever work on. Following a divorce from George
Lucas, Marcia has withdrawn from public view and kept to herself
While Martin Scorsese was without Thelma Schoonmaker in the since.
1970s, Marcia Lucas edited Alice Doesn’t Live Here

252
253
SECTION 1

What is Light Wrapping? Tips & Tricks

Let’s take an in-depth look at the art of light wrapping in post-production.

If you do a lot of keying, then you’re probably familiar with the term correctly, light wrapping can really help give realism to your scene. If
“light wrapping.” overdone, it can make your footage look soft and unbelievable.

The concept of light wrapping is easy to understand, but in practice Light wrapping is often performed automatically when using a
it can be rather difficult to get a perfect light wrap. Let’s take a look keying software. However, just like in photography, automatic
at light wraps and examine a few easy methods for creating them. doesn’t always mean better!

What is Light Wrapping? How to Light Wrap

Light wrapping is a compositing technique designed to blend keyed- In a nutshell, light wrapping works by softening the hard edges
out green screen footage with a background plate. When done produced when keying out green screen footage. By adding in a
feathered portion of the background to the edges of the keyed

254
subject, you can make your scene look more like a composition than Key Correct
a series of layers. Check out the following diagram:
Key Correct is an industry standard when it comes to light wrapping,
noise reduction, and any other key-related feature you can imagine.
In Key Correct you will find 15 stand-alone plugins designed to help
you clean up your green screen keys. The results are fantastic and
you can even get a free trial from Red Giant’s website.

Price: $399

Borris Continuum: Key and Blend

Serving as a small portion of the larger Boris Continuum Complete,

the Key and Blend pack gives users of After Effects, Premiere, FCPX,
Resolve, Nuke, Scratch, and Media Composer the ability to preform
realistic light wraps with ease. The pack comes with 20 plugins and
filters designed to help with the compositing process. Boris is also
As you can see, light wrapping is a very subtle effect that, when done offering a free trial of Key and Blend so you can use it today.
well, isn’t going to be noticed by your audience. The light wrapping
layer is merely using the outline of the keyed footage to blur out a Price: $299
small portion of the background.

Light wrapping is used to simulate the ambient light that is

supposedly casting light onto your subject in the scene. In some
circumstances, like mixed lighting, it can be better to use another
layer besides your background layer for the light wrap. Really, it all
depends on your scene.

Plugin Solutions
A lot of high-end keying applications have light wrapping built in,
including the Keylight software that comes with Adobe After Effects.
However, if realistic light wraps are your goal, we suggest you check
out the following plugins:

255
SECTION 2

Easy Tips For Creating an Awesome Title Sequence

Grab your audience from the get-go with a perfectly executed title sequence!

In terms of production value, the difference between a project shot A) Go overboard and attempt to create a heavily animated After
for $10,000 and one shot for $1,000,000 isn’t all that different any Effects style title sequence, or…
more. Cameras like the RED EPIC DRAGON have opened up the
B) Keep things simple and overlay text on the edit itself, or on a
ability for low budget filmmakers to create final products that can
black background.
rival productions with many times their budget.
Unless you are a professional After Effects artist, I would always
Yet, no matter how good the camera tech gets, there are always
recommend going with option B. Attempting to create an elaborate
going to be certain elements that can give away a low-budget film –
title sequence by yourself will not work 99% of the time and the
one of which is the opening title sequence. Most commonly, low
vast majority of projects simply don’t need it. In fact, the current
budget films make one of two choices when it comes to their
trend today with films of all sizes is leaning towards fewer titles (if
opening titles. They will either:

256
 always better – so never up your font size unless absolutely
necessary.

2. Choose a tasteful font.

This one is going to sound like a no-brainer, but poor font choices are
very common.

It’s usually best to now use textured fonts. In other words, fonts that
have a grungy or spray painted look (or anything else overly stylized)
can look very cheap. Clean and simple fonts will almost always work
better.

Keep the following truth in mind: if your film is successful, it will be

seen for many years to come. The last thing you want is to get stuck
any) up front, and going for a more minimalistic approach with with a font that dates your movie.
regards to the design. 3. Don’t Animate the Titles
While there is no such thing as a one size fits all solution for any A few years ago, a trend started that involved animating titles to
creative choice, the following five tips which will keep your basic match the picture. So, for example, there might be a shot of a bus
titles looking clean and professional: crossing the screen, and then the titles might follow along behind it.
This fad has largely died off, yet many indie filmmakers are still
1. Keep the Font Small attempting to animate their titles in hopes that it will add some
Awkwardly sized titles are notoriously prevalent among indie films. production value.
There is no reason to have opening titles take up half of your screen
real estate. Unless you’re intentionally going for a certain look, such Simple is always better. Nine times out of ten you’re going to be
as block text that covers almost the whole screen, keep your titles better off just fading in a static title over picture (or black) than
nice and small. animating it to achieve an unoriginal effect.

The best thing to do is find a size that is just comfortable enough to 4. Use Framing Guides
read without squinting your eyes, but not much bigger than that. The You can easily tell when an editor hasn’t used framing guides with
main title card with the film’s name is the exception to this rule, and their titles. One title will fade into the next and they will just be
you can always have that title appear much larger so it stands out slightly off from each other. Or a main title that is supposed to be
from the rest. However, for any and all other titles, small is almost centered will feel like it’s off to one side or the other.

257
It takes you practically no time to turn on your framing guides and
snap your titles to the right position on the screen. Whatever you do,
please make sure you don’t skimp out on this step.

5. Avoid Drop Shadows

As we mentioned before certain font choices can really date the look
of your film. The use of drop shadows can pose the same issue. Drop
shadows can look okay in certain circumstances, especially when
they are part of the overall aesthetic of the film’s brand. However,
they should never be used simply because the text needs to stand
out more.

For example, if you’re trying to put one of your title cards on a shot
that has a high-contrast background and the title isn’t showing up
properly – you might be tempted to add a drop shadow. This is the
logical thing to do. But at the same time, it will change the overall
feel of your titles. If you absolutely have to use drop shadows, then
go for it – just make sure you use them across the board on all of
your titles to ensure a sense of consistency.

258
SECTION 3

Understanding Spatial and Temporal Interpolation in After Effects

Temporal and Spatial Interpolation are two distinctly different terms. What do they mean and what purpose do they serve in After Effects?

There’s a lot of lingo to learn in After Effects. There’s a lot of foreign Temporal Interpolation
verbiage – from Frame Blending to Rasterizing – that can be quite Temporal Interpolation refers to the way After Effects processes
confusing to both AE rookies and experts alike. Two terms keyframe changes in time. For example, when you’re converting
commonly misunderstood in After Effects are Temporal and Spatial your position keyframes from linear to Bezier or Easy Ease, you are
Interpolation. changing the time at which the layer will be at a certain point, not
necessarily changing the shape of an object’s path.
The terms Temporal and Spatial are used almost exclusively to talk
about interpolation (the way After Effects processes data between When creating lifelike movements, adjusting the temporal
keyframes) in After Effects. However, the two are very different in properties are a must. If you’re viewing the speed graph in the graph
the way they work. editor, you are viewing a temporal graph — it only deals with
changes between keyframes in time, not in 2D or 3D space.

259
Spatial Interpolation successful in After Effects. But understanding the difference
between the terms will help your mind become better attuned with
the way After Effects processes data, which might help if you want
to dive into scripting in the future.

Whereas Temporal Interpolation has to deal with changes in an

objects time, Spatial Interpolation deals with changes in a layer’s
path shape. When you’re talking about smoothing an object’s
keyframes using Spatial Interpolation, you’re talking about
smoothing in such a way that harsh path points become rounded.

When to Modify Interpolation in After Effects

Both Temporal and Spatial normally refer to the type of smoothing

that you’re going to be adding to your keyframes. By using the
Smoothing Window in After Effects, you can select your desired
keyframes and it will give you the option to smooth using a Spatial or
Temporal path. If nothing else, using this technique will help you
learn the difference between these two types of interpolation.

Still Confused?

In the end, it’s best to think of Temporal as Time and Spatial as Space.
Practically speaking, you probably won’t need to know the
difference between Spatial or Temporal Interpolation to be

260
SECTION 4

Useful Blending Modes in After Effects

We shed some light on our six favorite blending modes in After Effects.

One of the quickest ways to add stylization to your video or images black background. For example, take this image
in After Effects is to use a blending mode. Blending modes (or
transfer modes) are “mini-effects” that can be applied to any layer in
your composition to make it interact with the layers beneath.
Transfer modes can serve as a quick keying utility, a color effect, or
even a silhouetting tool. Here’s a roundup of six popular After
Effects blending modes.
1. Screen
Screen is used to get rid of the dark parts of your image. It lets you
composite elements on a black background into your scene. You can use
this mode in a VFX context, as VFX elements tend to come pre-or on a

261
And put in this snow element... 2. Multiply
Multiply is the opposite of Screen. Instead of taking out an image’s dark
parts, it takes out light parts. Multiply can be used in a lot of different
ways, but I typically use it to add grungy textures to my compositions.

For example if we had this image:

We can apply a the Screen transfer mode to composite the snow into the
final image.

and wanted to add this image:

262
We could simply add a Multiply effect to create a grungy effect.

And wanted to create a ‘Hipster’ style light leak we could put this
masked out solid layer on top.
3. Add
Like Screen, the Add transfer mode leaves only the highlights of the
image while removing the dark parts. However, Add goes one step
further. Add, as the name implies, adds its color values to the image
below causing the image to greatly increase in brightness.

You will typically use this transfer mode to simulate lighting in your
composition such as lens flares or light leaks.

For example if we had this image...

Then we could apply the transfer mode Add to create this stylized
light leak look.

263
 and applied this image to the top of the composition...

4. Classic Color Burn or Color Burn

In line with Multiply, the Color Burn transfer modes will darken your
image. However, Color Burn differentiates itself in a way that it
blends with the background. As the name implies it creates a burned We would end up with this:
look, making it great for grunge and vintage looks. Highlights are
retained when using the color burn effect. Color Burn is typically
used to add a dirty vintage effect.

For example if we had this image

264
5. Overlay 6. Soft Light
Overlay changes the color of the mid-tones while preserving the Soft Light is very similar to the Overlay transfer mode. However, Soft
light and dark parts of your image. Overlay is typically used to add Light tends to be very subtle whereas Overlay is more noticeable.
stylized elements into your composition. The following example is an Here’s the same layer on the same image with the Soft Light transfer
image with a green solid with the Overlay transfer modes applied. mode applied instead of Overlay.

265
SECTION 5

Tips for Faster Rendering in After Effects

Sick of slow render speeds? Check out these fourteen tips for faster rendering in After Effects.

Rendering is an annoying (but unavoidable) aspect of the motion the full list on the system requirements page on Adobe’s website. If
graphics process. However, there are a few steps you can take to you’re using a sub-par card, you’ll likely see an instant render speed
make your After Effects renders as fast as possible. increase when you switch.

1. Use the Right Graphics Card 2. Upgrade Your RAM

After Effects is an incredibly intense program for your graphics If you work day in and day out in After Effects, then upgrading your
card. No surprise, right? And while there may be hundreds of RAM is the way to go. Adobe recommends at least 4GB of RAM to
graphics cards available for your computer, only a few are run After Effects, but you’ll benefit from much more than that. It’s
recommended by Adobe to run After Effects. Adobe specifically not uncommon for professional AE users to have 32GB of RAM or
recommends certain GeForce, Quadro, and Tesla cards. You can find more.

266
3. Use a Solid-State Drive

Simply click the check box next to ‘Render Multiple Frames

Simultaneously’ and adjust the settings to your liking.

6. Reduce Pre-Comps

A solid-state drive is a quick way to increase rendering speed in

After Effects and the overall speed of your computer in general. If
you purchased your internal or external hard drive for less than
$100, it’s time for an upgrade. With a solid-state drive, After Effects
will be able to load assets, reference the cache, and load effects
much faster… all leading to reduced render times.

4. Use Two Hard Drives

When you render your footage to the same hard drive your project is Pre-comps are a funny business inside of After Effects. When it
saved on, you are forcing that hard drive to perform two operations comes to creating an organized and convenient workflow in After
simultaneously: read and write. While this doesn’t lead to render Effects, pre-comps are extremely efficient. However, pre-comps
times that are twice as slow, it does lead to reduced render times. aren’t always best when it comes to creating fast render times. This
Instead, try using one hard drive to run the program with assets and is because pre-comps require pixel information to pass through
another hard drive to render the finished video. multiple compositions before rendering to your hard drive.
5. Turn On Multiprocessing 7. Clean up your Compositions
After Effects has the ability to render out multiple frames at the Just because you can’t see a layer inside your composition doesn’t
same time using multiple processing cores. By default, mean it isn’t being rendered by your CPU. So before you send your
multiprocessing isn’t turned on in After Effects... you have to do it by composition to the render queue, make sure you delete/trim any
hand. To do so, navigate to After Effects > Preferences > Memory & unused layers inside your composition.
Multiprocessing. A screen that looks like this will pop up:

267
8. Trim Layers Off-Screen 11. Choose the Right Codec
Files that are actually out of the video frame will still take a toll on
the rendering time, especially if you are using 3D cameras. If your
goal is to optimize render times you need to use the trim feature
(option + [ or ]) to trim your layers up to the exact frame that they
will be used in your composition. Less compressed codecs like MOV take longer to render in After
Effects than smaller codecs like H.264 or ProRes. It’s important to
9. Turn off Ray-Traced 3D ask yourself what your video will be used for once it’s done. Will it be
on TV or simply embedded on the web? If it’s going online, chances
are it’s going to be incredibly compressed anyways. So maybe you
don’t need to export your video as lossless?

12. Turn Off Motion Blur, Depth of Field, & 3D if Unused

Ray-Traced 3D layers was one of the coolest features introduced
into After Effects in CS6. Finally... a way to create 3D models directly
in After Effects!

This excitement was short-lived though, as Ray tracing takes way too When it comes down to increasing your render speed in After
long to be practical for everyday use. Make sure your composition is Effects,you need to ask yourself: will this feature be used in my
set to Classic 3D instead of Ray-Traced 3D before you render. If you video? Often you can toggle unused features off to make your
don’t, you’ll see your render time increase by at least double. render times much faster. For example, if you don’t need your
layers to have motion blur, you can toggle the motion graphics
10. Close Other Programs button to ‘off.’ If you have a 3D camera, do you really need to have
It can be easy to forget, especially when using the Adobe Dynamic depth of field? Or are you trying to get a 2D flat look? If your layers
Link, but before you render a composition in After Effects you need are set to 3D, is it for a good reason? Could you simulate 3D by
close out all the unused programs running on your computer. This scaling down your objects and moving them in 2D space?
will free up space for your CPU to run After Effects.

268
13. Be Selective with Effects they would be released. But now that the Creative Cloud is
prevalent, you should always have the latest update.

Bonus: Use Media Encoder to Export Compositions

One of the biggest problems with using the render queue in After
Effects is the fact that you can’t do anything else while rendering.
Not all effects are created equal. Some take more time than others to
render. To speed up render times, you need to become very selective However, this is a “hack” that you can use to render AE compositions
about the effects you use. Most effects have been optimized to render and still work on another project using Adobe Media Encoder.
across multiple threads on your CPU, but there are a few that will only
allow After Effects to use one thread at a time. If an effect only uses Simply import your AE project into Media Encoder and you will be
one thread it will take much more time to render. These effects are: able to select which composition you wish to export. Because this
doesn’t go directly through After Effects, you will be able to work on
• Auto Color other projects during this process.
• Auto Contrast
• Auto Levels
• Cartoon
• Lens Blur
• Particle Playground
• Shadow/Highlight

14. Newest Version of AE

While each update to After Effects may not seem revolutionary,

Adobe is constantly trying to make After Effects faster and more
optimized for users. It is important to install the latest version of
After Effects available to you. Sure, back in the day it was a large
financial commitment to purchase each Creative Suite update as

269
SECTION 6

After Effects: Presets vs Plugins vs Scripts vs Expressions vs Templates

Confused about the lingo in After Effects? Let’s break down the key differences between presets, plugins, scripts, expressions, and templates in AE.

There’s a lot of confusion out there over the different terms used in layer in After Effects, you can save your effects as an animation
After Effects… and rightfully so. The terms above are often used preset and recall them in the future. Expressions can also be saved
online interchangeably, adding to the uncertainty. Let’s clear up the into presets to give them added functionality. We’ll get to that in a
confusion. moment.

After Effects Presets To save a preset in After Effects, simply go to Window > Save
Animation Preset with your effect layer selected. You will now be
able to see your new effect in the effects browser.

Skills Needed to Create: Basic After Effects Knowledge

Animation presets are a collection of effects that can be saved for
later use. Animation presets are made up of effects (and keyframes
in those effects). If you ever create an interesting look on a single

270
After Effects Scripts Templates
A script is a block of code that tells After Effects to do something. A template is an After Effects project file that is intended for
Scripts can be used to perform various tasks inside After Effects, customization. Templates can utilize plugins, as long as the person
from creating layers to batch rendering. Like presets, scripts are opening template has the plugin installed on their computer. Any
usually used to save time in After Effects, but scripts aren’t limited to project can be turned into a template... just go to File > Save As and
effects only. Generally, scripts are used to perform utility functions select After Effects Template in the dropdown.
inside of After Effects.
However, it’s important to remember that templates can only be
Scripts use a coding language called Extend Script, a deviation of opened in current and future iterations of After Effects, not versions
JavaScript. Scripts can’t be directly written and tested inside of After from the past. So if you save your template in After Effects CC, you
Effects. Instead, script creators usually use the ExtendScript Toolkit can’t open it in After Effects CS6.
included in the Adobe Creative Cloud. The ExtendScript toolkit can
Special Skills Needed: Basic After Effects Knowledge
be used to write scripts for most of the programs included in the
Creative Cloud, not just After Effects. Notable Examples: Retro Titles, Blood Splat Titles
Special Skills Needed: ExtendScript or JavaScript Expressions
Notable Examples: Dojo Toolkit, Motion 2 An expression is essentially a snippet of ExtendScript written
directly into After Effects. Expressions are typically used to
Plugins manipulate values for a single parameter like color, position, or
Plugins give After Effects users extended functionality beyond what intensity. Expressions can be used to link values to sliders and
is possible inside of After Effects alone. Plugins are created using checkboxes, making them great for anyone looking to create well-
external code that essentially creates a new software that works organized templates. Expressions can range from a few words to
alongside After Effects. Some of the most revolutionary tools in hundreds of lines of code. It all depends on the functionality.
After Effects (like Element 3D, Optical Flares, and Trapcode
Special Skills Needed: Basic JavaScript
Particular) are all great examples of plugins.
Notable Examples: Wiggle Expression, If/Else Expression
Plugins are difficult to create, so it’s unlikely that you will be able to
create a plugin on your own without an extensive background in
coding.

Special Skills Needed: C/C++, JavaScript

Notable Examples: Element 3D, Trapcode Particular, Optical Flares

271
272
SECTION 1

Five Underrated Ways to Promote YouTube

Check out this list of highly underrated ways to promote YouTube videos. Apply them properly and you might get more eyes on your videos and channel!

Uploading a video to YouTube is just the beginning. The real fun significantly easy for viewers to watch multiple videos with no
comes when you decide to find ways to get your video in front of a effort at all. Since you hook viewers up for several videos in your
larger audience. After you’ve applied basic and advanced playlist, the overall watch time is increased dramatically.
techniques in boosting your video’s ranking in search, try out these
To create successful playlists, be very strategic. You don’t need to
valuable (and often underrated) tips to enhance the reach of your
stuff all your videos in one single playlist. Group videos by topic so
YouTube videos.
that viewers want to watch the videos in one shot. Don’t be too self-
1) Build YouTube Playlists Around Your Videos centered while creating playlists. Create playlists using your own
Playlists play an extremely important role in distributing your video videos and other videos if they fit the topic.
content on YouTube. Frankly speaking, playlists need to be in the
center of your channel strategy. Why so? Well, playlists make it

273
You may want to order your own videos to be at the beginning, in the
middle, and at the end of your playlist. Playlists need to be optimized
with relevant descriptions so that viewers can find them in search.
Publish playlists within your YouTube channel. In this way, the
playlists will easily reach your subscribers.

One caveat to bear in mind — After the above cross-promotional

events take place, make sure you continue “feeding” your new
subscribers with videos on a regular basis. That content will
determine if your new followers want to stick around.

3) Promote Your Videos on Friendly Blogs

2) Collaborate With Other Creators on YouTube In the same vein as reaching out to fellow YouTubers, create a circle
Collaborating with other video creators (especially channels of bloggers who can help drive video views by embedding your
catering to audiences similar to yours) is a proven method to get videos into their posts. By the way… this one is really tough!
your channel beyond its regular reach. You’ll likely find that video Bloggers treasure the relationship they’ve cultivated with their
creators are open to testing new content and giving new stuff to readers and will be cautious about any content coming their way.
their viewers.
To start off, track down the sites that embed your videos. How to
So the task is to find channels which work for your audience and track them down? Set Google Alerts for your channel name, your
reach out to them. What to do next? Guest-starring is one of the video titles, and specific keywords you use in the video descriptions.
most popular techniques. Some other ways that work include: joint Contact bloggers with the videos most relevant to their preferred
hangouts, exchange of video uploads, and links (both in-video and in writing subjects. Why not invite bloggers to check your playlists out
text descriptions). too?

274
 Bonus Tips
Promoting your YouTube videos may seem an overwhelming task.
But the more you promote your videos with good results, the more
you will want to continue. Here are a couple of bonus tips:

1. Improve your video production.

Get a better camera, improve your sound, add some quality royalty
free background music.

2. Create expectations and satisfy them.

Regular production and scheduled publishing – these are two keys to

keep your audience engaged. You create an expectation. Make sure
4) Insert Your Videos in Email Updates you live up to it.
Promoting your content by email does work, even though there are
3. Share on social.
rumors email is dead. Remember that your subscribers provided
their emails voluntarily! You’ve already won their hearts. So give YouTube is a massive social platform by itself. But you want to get
them more news and updates. your videos beyond it through sharing on other social media outlets.
If you have a list of email subscribers, send them a message every And Facebook is not your limit. Consider Twitter, Reddit,
time you upload a new video. If you send regular newsletters, StumbleUpon, and LinkedIn.
mention your videos in these emails. Adding a description and an 4. The very last bonus tip.
attractive screenshot or thumbnail in the email is usually enough to
start getting clicks and, eventually, video views. If you are serious about promoting your videos on YouTube,
download the YouTube Creator Playbook and read it through.
5) Use Old Public Relation Promotional Methods
How do PR companies still exist in this digital era? Well, simply put,
it’s because good old-fashioned PR works. A well-distributed press
release containing your video can land you a lot of traffic and views.
Talking in public or on the phone and following up with a summary
(with your video in it) is also part of the PR game. Presentations at
various industry events also fall into this category.

275
SECTION 2

How to Avoid Film Festival Rejection

Rejection is a brutal reality in any creative industry. Fortunately, there are steps filmmakers can take to avoid film festival rejection.

Getting into a festival (especially a major) is a huge challenge to say genre films finished every year and a great deal of them are
the least. Even with all the competition out there, you still have a subsequently submitted to major film festivals. The problem is that
shot… you just need to tell your story in a way that is conducive to a there are only a small handful of spots for a genre film at any of the
festival acceptance. Below, I’ll outline my top three reasons that majors. Of course, sometimes it works out. The small 2015 horror
your film might face film festival rejection. Next time around you’ll film ‘It Follows’ found acclaim at Cannes and went on to mainstream
know what NOT to do! success.

You Submitted a Genre Film to the Wrong Festival While it may be true that there are films from every genre at any
Genre films (horror, sci-fi, etc.) are very often created by filmmakers major film festival (including horror and sci-fi), the truth of the
on a tight budget, as they are typically easier to sell when compared matter is that top-tier festivals often only have a few narrative
to dramas or comedies. As such, there are staggering amounts of feature spots open for genre films to be programmed in. If you have

276
a genre film on your hands, you should be focusing your efforts on We’re not just talking about production value or the acting here
genre festivals. This may also increase the odds of getting (which are both extremely important), but rather the overall story
distribution from a buyer at the festival. and meaning behind your film.

You Submitted a Rough Cut Having a good film isn’t enough. It needs to be thought-provoking,
Most festivals allow filmmakers to submit their films as a work-in- timely, relevant, and impeccably produced.
progress cut. This may be fine if you’re a well-known filmmaker, as
The next time you’re upset that your film didn’t get into Sundance or
sending in a rough cut can get you on the radar of the programmers.
Cannes, take a look at some of the films that did and ask yourself
This probably isn’t the way to go unless you’re a name producer/
why they got in. While you might want to tell yourself it’s because
director. In fact, sending in a rough cut is generally a bad idea.
the filmmakers knew someone or had some sort of connection – the
From the programmer’s perspective, there is a massive concern that truth is that their film was probably stronger than yours and a better
the story you are submitting will differ significantly from the final cut fit for the festival.
submitted. And really, why should they take a risk on your
That doesn’t mean that your next one won’t get in or that you are a
incomplete film when they’ve received tens of thousands of
bad filmmaker. But it does go to show that you likely still need to
completed, high quality submissions that they can choose to
hone your craft to the point where your films will be festival worthy.
program instead?
It’s totally doable with enough dedication.
This notion applies to films that are not yet picture locked and those
that are locked but haven’t yet had any finishing work done on them.
Finishing elements like color correction, sound mixing, etc. have a
great impact on how an audience views and enjoys your film. In this
case, the audience is festival programmers. They understand the
craft of filmmaking, but they have no idea what your film is going to
look like when it’s done.

You Didn’t Submit a Festival-Worthy Film

Festivals, large and small, are fiercely competitive. You may do all the
right things, follow all the guidelines available to you, read every
book on how to get into festivals, submit a fully polished cut… But at
the end of the day, if the quality and substance of your film is
anything less than incredible, then nothing else will matter.

277
SECTION 3

Tax Deductions for Filmmakers and Videographers

Make tax season a little less painful with these tax deductions for filmmakers and videographers. It will likely save you money!

Before we begin: We’re not Certified Public Accountants, so be sure documentation to my CPA so she can prepare my taxes for filing.
to consult a CPA to find out exactly what tax write-offs work best Speaking of CPAs…
for you. Let’s kick this off with two pieces of very important advice…
2. Hire a Certified Public Accountant
1. Keep Immaculate Records You’re going to need help navigating the ins and outs of what can be
Keep your records in order and set aside a percentage of every deducted and what can’t. Hiring a CPA will help you save some
dollar you earn for self-employment tax. We’ve found that utilizing money in the long run.
assets such as Square to send invoices and run credit cards really
helps me keep my records tight. Then you tie Quickbooks to a bank Deductions for Filmmakers and Videographers
account to consolidate all of your records into one place. At the end As we explore these possible tax deductions for filmmakers and
of the year, all you have to do it send the Quickbooks videographers, keep in mind that you could end up audited. Be sure

278
that you can justify your deductions. That point is going to come up a cards, tripods, sliders, and stabilizers are deductible as long as they
lot as we move forward. Now let’s look at some easy ways that are being justifiably used for your business.
deductions can save you some money.
4. Digital and Print Research
1. Small Items
As filmmakers and videographers, we are constantly consuming
Any small item that you spend money on for daily production tasks is content in order to stay on top of what is going on in our industry.
something you can deduct. Tool kits, dry erase boards and markers, Because of this, you might be justified in deducting the whole cost or
gaffer tape, etc. These are all things you can deduct. You just have to a portion of the cost of Netflix, Hulu Plus, Amazon Prime, cable
be able to justify the purchase and its use in your daily business. service, movie tickets, industry books, periodicals, and smart phone
apps. Again, you have to be able to justify these expenses as
2. All Computer Related Items
something you need for your work. Your CPA will be able to give you
If you purchased a new computer this year, it’s deductible – with a concrete answer on whether you can apply these expenses as
some conditions. If you use that new computer solely for work, then deductions.
you can claim the entire purchase price, but only by using a Section 5. Dining and Entertainment
179 Deduction. If you’re using the computer for business and
personal, that changes how much of the purchase price you can To deduct dining and entertainment expenses, you need to be able to
deduct. Your CPA will be able to give you a more concrete idea of justify how they relate to your business. More than likely you won’t
what those numbers are. It’s not just hardware that can be deducted; be able to claim the entire amount. When dining with clients or
software is eligible too. Your Adobe Creative Cloud subscription is a colleagues, I usually claim around 50% of the cost. I’ll also deduct the
great example of software that’s deductible. Just make sure you give cost of a wrap party for my crew after filming has concluded.
your transaction invoices to your CPA in Quickbooks or physical Screenings and premiere costs are also deductible. All of these
form. things can be seen as the cost of doing business.

3. Film & Video Production Equipment

Every piece of equipment that you purchase for your work is a

deduction during tax season. Did you purchase a new camera this
year? That’s a deduction. Did you go to B&H Photo and purchase
new lenses for that camera? Maybe a penguin case? ND filters?
Those are deductions. Or maybe you purchased new sound
equipment from Sweetwater. Deduction. Even batteries, memory

279
6. Online Presence 8. Business Startup Expenses

All of us need some sort of online presence in order to build our Keep track of all the costs that you pay out to start your business
business. Because building this online presence is so crucial to such as incorporation fees, lawyer fees, and copyright/trademark
earning a living, you should look at deducting the cost of this filing fees. You can even deduct the payments made to your CPA or
presence. Things that could apply here are cloud storage costs financial advisor.
(Onedrive, Google Drive, Dropbox), yearly website domain and
9. Printed Self Marketing
hosting costs, and online membership costs such as IMDB Pro. Even
the costs of website design and development are deductible. In addition to your online marketing, you’ll likely want to purchase
7. Travel Expenses and Conferences printed media like business cards, flyers, or brochures. These costs
are deductible as well.
Expenses you incur while doing business outside of your home might
10. Home Office Expenses
fall into the travel expenses category. Whether you’re driving for five
hours or taking a flight across the country for a film shoot, these are
all deductible expenses. Be sure and keep records of everything,
including rental cars, taxi rides, and hotels. If you paid for the travel
of your crew, add that cost as well. Additionally, if you’re attending a
conference like NAB or SXSW, you can deduct the attendance costs
since they pertain directly to your work.

Home offices and editing rooms are loaded with potential

deductions, including the actual space you use. Other likely
deductions: desks, chairs, lamps, pens, printers, printer paper, ink

280
cartridges, staples, etc. You get the idea. These may seem like small
insignificant purchases, but they add up quickly.

What We’ve Learned About Tax Deductions

Deductions aren’t too hard to decipher, as long as they are legal and
pertain to your business. With that in mind, the most important
takeaways are: Keep immaculate records and hire a CPA. Talk to
other filmmakers that you know – chances are one of them has a
CPA that they can recommend.

281
SECTION 4

Get More Views: Ten Basic Tips for Posting A Video Online

What’s the point of posting video online if nobody is going to see it? Up your views with these basic tips for posting online video.

There are some very simple things that you need to get right in chances of this happening are hugely increased by ensuring that
order to successfully use online video to boost your business, your video is shareable through as many avenues as possible.
career, or site traffic. Some of these basic dos and don’ts might seem
Ensuring that your video can be embedded on other sites is a simple
too obvious to mention, yet people seem to get them wrong anyway.
one-click process, but publishers often seem to go out of their way
These are the ten things I’d consider vital to successfully using video
to make this impossible. Granted, keeping control over your online
online.
content might have its advantages (usually advertising revenue – if
1. Do Make it Shareable you have to watch the video on one site only, that site will get all the
What makes the internet such a great place to put your video is the traffic), but this advantage is vastly outweighed by the extended
simple and obvious fact that a whole lot of people can see it. The reach that’s gained by allowing the video to spread ‘virally.’

282
2. Add a Call to Action 1. The purpose and character of the use, including whether such use
Hopefully your video will be so good that people will want to do is of commercial nature or is for nonprofit educational purposes
something as a result. A call to action might be as simple as a ‘like’ or
2. The nature of the copyrighted work
as useful as a share, but do prompt your viewers on what to do next.
If you want them to get in touch with you, then make sure it’s really 3. The amount and substantiality of the portion used in relation to
easy to do so. If you’re hosting your video on YouTube or Vimeo, the copyrighted work as a whole
make the most of the description area to provide all of your crucial
information. Incredibly obvious, yes. But it’s astounding how often it 4. The effect of the use upon the potential market for, or value of,
doesn’t contain much helpful information. the copyrighted work

3. Add an End Logo and Branding If you’re so minded, you could add a Creative Commons license to
your work in order to help others know how you would like it to be
Make sure your viewers know who made it. This could involve an
treated.
opaque ‘bug‘ in the corner of the video, which is helpful for
dissuading people from ripping your video and reposting it as their 6. Don’t Use Copyrighted Music
own. Personally, I would aim for the best viewing experience for your This is one of the biggest giveaways that a video has been produced
audience and leave that off. Just add something to the end that also by an amateur filmmaker. Do yourself and everyone else a favor and
includes a memorable URL. buy a track from a reputable and high quality royalty free music site,
4. Track Your Stats and Shares like PremiumBeat. There’s plenty of music to choose from.
If your online video does find an audience, be sure to keep an eye on 7. Don’t Make it Overly Long.
the stats, shares, and other places the video ends up. The people who This is a pet-peeve of mine for online video. The maxim “less is more”
liked this video might like your other videos, products, services, is a reliable rule of thumb.
work, etc. Be sure to engage anyone who comments on or shares
your work. 8. Don’t Make it for Yourself
Be aware of your audience and make the video for them, not for
5. Use Copyrighted Material – But Only Under Fair Use yourself.
Guidelines
If you’re going to use copyrighted material in your video, make sure Instead of thinking “How can I communicate what’s so great about
you’re abiding by the Fair Use principles which most countries have my work/product/business/idea/opinion?” consider “What is it that
within their legal framework. In the United States, these four factors people want to know/feel/discover/buy?” The next point is a
need to be considered: practical example of this mentality at work.

283
9. Don’t Give It an Obtuse Title
One of the most influential variables to the success of your online
video is the title you give it. Think like a member of your target
audience and label it in a way that would help them to find it. Think
about the kind of search terms that you Google.

10. Don’t Give up After the First Go

If you’ve only just started making and sharing videos online, don’t
give up after your first attempt. Simply improve as you go.
Incorporate feedback and suggestions and emulate the things that
you see others doing successfully.

284
SECTION 5

Tips for Promoting Your Indie Film on Social Media

Creating a social media strategy is the key to building grassroots support for your film project.

It’s no secret that success on social media can lead to success at the There are a lot of good online resources (Fiverr, CrowdSpring, 99
box-office, but social media can sometimes feel unnatural and Designs) where you can inexpensively hire good designers.
foreign. Social media marketing is more than just creating a
Professional graphics are a great way to establish the legitimacy of
Facebook page, posting images, and hoping for a following. Take the
your film before you have any cast or crew onboard. If your
time to develop a social media strategy and see it through. Check
production is so independent that you can’t afford to pay crew and
out these tips for social media marketing success.
actors, a good movie poster can get potential crew members excited
1. Hire a Graphic Designer about your project.
Start your social media journey off right by nailing the right
And be honest with yourself. If your Photoshop and design skills are
marketing message for your project. A graphic designer is a solid
lacking, it’s best to leave this work to a professional.
investment for creating professional content for your marketing.

285
2. Examine Relevant Communities 4. Take On-Set Pictures
So you’ve got the basic marketing materials created: a poster, a Production photos are a great way to generate buzz around your
logline, a trailer, and a Facebook page or Twitter account. Where’s project. Statistics show that posts with photos receive significantly
your audience? In order for a social media strategy to be effective, higher engagement on Facebook and Twitter. Photo posts represent
you’ve got to quickly develop your audience. One way to find people 87% of the shared content on Facebook, versus only 4% for link-
that may be interested in your project is to look online for niche based posts.
communities that have to do with your film’s genre or subject matter.
Although you should encourage everyone on your team to take
Doing a horror film? There’s a Facebook page with over 1.5 million photos, make it the responsibility of one crew member to take a ton
horror film lovers. There’s a Reddit community dedicated to all of behind-the-scenes shots.
things horror with a targeted audience of another 50,000 people.
Perhaps your film deals with social issues like immigration, medicine, 5. Incentivize Your Followers
or the environment. Find organizations that focus on these issues. A recent change in Facebook’s policies now allows you to host
Whatever the genre or subject, there’s an online community promotions and collect entries through a FB post. In the same way
dedicated to it. Find it! If they can advocate for your project, you’ll be rewards are aimed at incentivizing Kickstarter supporters, you can
exposed to a large group of natural supporters. generate buzz by giving away promotional items on Facebook that
relate to your film. Randomly select a winner or encourage more
Take advantage of Facebook’s custom audiences feature to target participation by asking questions.
your postings to a relevant audience.
6. Make It a Collaborative Effort
3. Stay Consistent Who said you have to do social media alone? Encourage your cast
It can be easy to get caught up in creating an indie-film and forget and crew to interact with the film’s social media online. This can be
about your online fans. The secret to keeping your audience excited through sharing posts they find interesting or even posting their own
is to consistently post news and updates on your production original content. You’re busy… there’s no shame in asking others for
progress. “Consistent” doesn’t mean you need to bombard your help in this area.
audience with multiple posts daily. Just set a goal to provide updates
once or twice a week. When your production schedule becomes 7. Talk to Other Filmmakers
absolutely grueling, there are a lot of good online tools (like Get people talking about your film by being the initiator. Seek out
HootSuite and Tweetdeck) that can help you pre-schedule your other filmmakers and comment on their content. Follow film
posts. And remember to interact with your followers – social media professionals on Twitter and interact. Build support for your film
isn’t a one way street! project by supporting the work of others.

286
SECTION 6

Five Tips for Getting Your Indie Film Into Festivals

Prepping your film for a festival run? Consider these five tips for your best chance of success.

Many filmmakers today feel that festivals can be a waste of time. Festivals get thousands of submissions and the judges have a very
The cost of submitting to lots of festivals can be very expensive and hard time rejecting many of the films that don’t get in. So don’t feel
the chances of getting in to any given festival are very small. Not to bad if you’ve been rejected by festivals before – it’s all part of the
mention that even in a best-case scenario where your film is process. The best thing you can do is refine your approach to give
programmed at a major festival, it doesn’t necessarily mean yourself the best odds of getting in.
anything will come out of it with regards to distribution or
representation. 1. Submit To Targeted Festivals
We all want to have our films screen at Sundance and Cannes, but
All that said, festivals are still arguably one of the best entry points what about the smaller niche festivals? While the major festivals are
into the film industry if things line up just right, and they are a certainly worth submitting to, your film might have more success at
fantastic way to showcase your work. a smaller festival where your film will truly be able to stand out. A

287
niche festival will give you a bigger opportunity to rise to the top and issue, consider contacting festival programmers directly and
create a big buzz. requesting a fee waiver. Many festivals will offer this to filmmakers
on a budget, especially if you explain your case well.
2. Have a Rock Solid Logline
Festival programmers rely on your logline to help them learn about 5. Make A Festival Worthy Film
your film and decipher what programming block and genre it would Following all of these guidelines does not guarantee acceptance. If
fit into. In order to give yourself the best possible shot at getting in, your film isn’t quite strong enough, it won’t get in. Your film needs to
you need to represent your film accurately. For instance, if your be well-executed on every level and suitable for a festival
logline is misleading and makes your film feel like a different genre, it environment.
may be sent to the wrong programmer— and it may get rejected for
For example, if you’re making a short film, make it a short film. Don’t
the wrong reason.
submit a thirty-minute cut; they won’t be able to program your film.
More importantly, if your logline is extremely powerful it will also Keep things down to ten minutes or so. If you’re just writing a new
help the programming team understand how they can package and feature screenplay, try to write it with your festival of choice in mind.
market your film. After all, they do need to fill seats in the theatre. Different festivals have different preferences for the type of content
they are drawn to, so make sure that your film is destined to be a
3. Fill Out Your Withoutabox Profile! good fit in every possible way.
It’s surprising how many filmmakers don’t take the time to fully
complete their Withoutabox profile. For those of you that don’t In Conclusion
know, Withoutabox is the interface that many festival programmers Regardless of how strong your film is, you still need to put yourself in
will see. Much like the logline example given above, your the best possible position to get your film programmed by the
Withoutabox profile is the best way to represent your film to the festival committee.
judges and let them know why it would be a perfect fit for them.
If you submit a beautifully executed film, a strong Withoutabox
If you can, take the time to write individualized cover letters for each profile, and a concise logline to several targeted festivals, you will
festival. Ultimately, the programmers do read them. Your chances of have a much better shot of getting in.
acceptance can only improve with a detailed Withoutabox profile
And when you do get rejected from a festival here and there, don’t
and tasteful cover letter.
worry. It doesn’t mean your film was bad, it just means it couldn’t be
4. Submit, Submit, Submit programmed.
Submission fees can be very expensive, but you need to factor them
into your budget. If you want to screen at three or four festivals, you
need to be prepared to submit to at least twenty. And if money is an

288
SECTION 7

How to Market Your Film on a Small Budget

No money? No problem. Here are some quick tips on how to market your film on a small budget.

Marketing your film is one of the most important aspects of the poster for your film, and the imagery for your website and Facebook
filmmaking process. Your film can be the most important page.
independent film of the last decade, but without a good marketing
There are countless small pieces of material that you’ll need. If this
strategy, you’re going to hamstring its potential. So, let’s look at
is something that you have no experience in doing on your own, try
some simple and easy ways to market your film on a small budget.
to reach out to a local artist artist.
1. Create a Marketing Materials Packet
2. Utilize the Internet and Social Media
You’re going to need marketing materials. This means you’re going
The easiest way to build your audience is to use the internet and its
to need to have a concrete brand for the film. Then you’ll want to
main outlets, those being a personal website and social media
build your materials from that branding. This includes cover images
and profile images for all of your social media platforms, a movie

289
platforms. First, let’s create a website for your film. For that you’ll principal photography done. Keep it to around one minute long.
want to use WordPress, Squarespace, or Wix. Finally, when you’re in post-production, create your extended and
final trailer. This one can be between a minute and a half to just over
Next, you want to utilize social media and its many platforms. For
two minutes long.
instance, use Facebook as the primary launching point, then use your
personal Twitter account as a secondary site to keep content rolling. 5. Get Listed on IMDb
Find out what works best for you. That could be any combination of IMDb is a great resource. Whether you like it or not, it gives your film
platforms including Instagram, Vine, Tumblr, etc. some extra credibility when marketing it. Just note that an IMDB Pro
membership will cost you $20 a month or $149 for a year. While this
3. Generate Press Releases
can be a steep cost, you are getting some pretty good benefits, such
Another really important way to market your film is to generate a
as networking opportunities with millions of other film
press release. In the press release, you want to give all of the most
professionals.
important information about your film in a very small sample size.
You also will want to speak about yourself as the director and your
past successes or other projects you’ve worked on.

Once you have the press release finished you’ll want to send that out
to as many media outlets as possible. Also, look for websites or
organizations that generate content that’s geared closely to your
subject matter. That could be anything from Science Fiction to Civil
War History. Explore all available options.

4. Create a Series of Trailers

The film production process is a long one, and you want to keep your
audience engaged. One way to do that is to create a series of trailers.
You’ll want to start out with something simple, a short 30-second
teaser. It could be as simple as just having some dialogue and a logo
reveal. Or you could take a character from your film and build a short
trailer using footage that probably won’t make it into the film. Just
be creative and continue to release trailers as you move through
your production process.

Again, the first trailer or two are just to get your audience interested
in the project. Release another trailer once you have a bulk of your

290
Image Credits
All images courtesy of Shutterstock Inc. Copying, sharing, or distributing Shutterstock images without proper licensing is prohibited. For
more information, please visit http://www.shutterstock.com/license.

ccxciii
© 2015 PremiumBeat / Shutterstock

ccxciv