RUBBERREBUILDACT

MATERIAL SAFETY DATA SHEET
Last changed: 05/Dec/1999 Internal no.: :rev LdV-1 Replaces date:
Unitor Rubbergrade 6 Rebuild Activator

1. PRODUCT AND COMPANY
TRADE NAME Unitor Rubbergrade 6 Rebuild Activator

APPLICATION Engineering Repair Compound
PRODUCT-NO 103 606012 (complete set)
Producer/Importer UNITOR ASA

Address P.O. BOX 300 Skøyen
Zipcode & City 0212 OSLO
Country Norway
Telephone +47 22 13 14 15
Fax +47 22 13 45 00
Contactperson Product Group Repair & Maintenance
Issued by Leen de Visser (+31 6 538 63736)
Emergency number Int. +44 1865 407333
Int. +1 703 5273887

USA (800) 424-9300
Greece Int. +30 1 7793777
2. COMPOSITION OF PRODUCT
No Ingredients name CAS-NO Conc.(weight%) Classification
1 Phenyl Mercury Ester 26545-49-3 1-4% T;C,25-34-48/24/25
2 Diethyltoluenediamine 68479-98-1 5 - 10 % XnN,22-36-48/22-50/53-
50/53
3 Components which do not contribute to the classification of the ~ 90 %
product.
Legend T+=Very toxic, T=Toxic, C=Corrosive, Xn=Harmful, Xi=Irritant, IK=No classification required, E=Explosive, O=Oxidising,
F+=Extremely flammable, F=Very flammable, Fo=Flammable, N=Dang. to the environment, Mut=Genetoxic,
Sens=Sensitizing, Carc=Carcinogen, Repr=Causes birth defects
3. HAZARD IDENTIFICATION
Harmful
Paste.Black.
Harmful by inhalation, in contact with skin and if swallowed.
May cause sensitization by skin contact.
Contains organic mercury compound.
4. FIRST AID
1/6

GENERAL
Seek medical attention if any signs of unconsciousness or discomfort develop.Show this safety data sheet to the
physician present.
INHALATION
Normally low inhalation risk.
Get medical advice if discomfort develops.
SKIN CONTACT
Wash skin thoroughly with soap and water for several minutes.Get medical attention if irritation persists after
washing.Remove contaminated clothing immediately.Wash contaminated clothing before reuse.
EYE CONTACT
Flush with large amounts of water (open eyelids) for at least 15 minutes.Get medical advice.
INGESTION
IF SWALLOWED, DO NOT INDUCE VOMITING - SEEK MEDICAL ADVICE.
Give plenty of water to drink.Keep at rest.
Never give anything to drink and never try to induce vomiting if the patient is not fully conscious.
5. FIRE FIGHTING MEASURES

PROPER FIREFIGHTING EQUIPMENT
Water spray, fog or mist, alcohol-resistant foam, dry chemical, carbon dioxide (CO2).
IMPROPER FIREFIGHTING EQUIPMENT
Do not use strong water jet for extinguishing - may cause spattering of burning material.
FIRE AND EXPLOSION HAZARDS
Fire generates toxic gases.
PERSONAL PROTECTION WHEN FIREFIGHTING
Use self-contained breathing apparatus if substance is involved in fire.
6. ACCIDENTAL RELEASE MEASURES

SAFETY MEASURES TO PROTECT PERSONS
Use personal protective equipment as specified in section 8.
SAFETY MEASURES TO PROTECT THE ENVIRONMENT
Dike with absorbent material and prevent spreading and release to water sources and sewers.
PROPER METHODS FOR DAMAGE LIMITATION AND CLEANUP
Mix the chemical with an inert material (sand, vermiculite, etc.) and place in a suitable container.Shovel or wipe up.Flush
with water.
7. HANDLING AND STORAGE

HANDLING
When using do not eat, drink or smoke.
HANDLING ADVICE
Use personal protective equipment as specified in section 8.Avoid contact with skin and eyes.
STORAGE
Store between 5 and 40 ºC in a dry, well-ventilated place away from sources of heat and direct sunlight. Containers
must be kept tightly closed.
2/6

OTHER INFORMATION
Wash hands after using the product.
8. EXPOSURE CONTROL AND PERSONAL PROTECTION
Ingredients name CAS-no TLV value TLV Year

Phenyl Mercury Ester 26545-49-3 0.05 mg/m3
Diethyltoluenediamine 68479-98-1 0.0
EXPOSURE CONTROL
All handling in a well-ventilated place.
RESP. PROTECTION
Normally not necessary in ordinary use.
Use respiratory protection when handling the product in confined areas.
EYE PROTECTION
Normally not necessary.
Wear eye protection if there is a possibility of direct contact or splashes.
HAND PROTECTION
Use ordinary rubber gloves.
Barrier creams may help to protect the exposed areas of the skin,Barrier creams must not be used to protect the exposed
areas of the skin.
SKIN PROTECTION
No information on specific protective clothing, but it may still be required.
OTHER INFORMATION
For grinding/polishing hardened (cured) material, the minimum protection level is particulate filter P2 in combination with
organic gas filter A1.
9. PHYSICAL AND CHEMICAL PROPERTIES

Form Paste.
Colour Black.
Odour Ammonia-like.
Solubility Insoluble in water.
Melting point/range <0 ºC Density 1.15
Expl. limit LEL-UEL., %-%: N/A Solubility in water 0
Vapor pressure N/E Saturation conc. N/A
Decomposition temp. N/E Rel. density sat. air (air=1) N/E
pH Solution N/A Boiling point/range > 300 ºC
Flash point >150 ºC pH concentrate: N/A
Molecular weight N/A Viscosity N/A
Auto Ignition temp. > 450 ºC Smelling limits lo-hi N/E
Rel. vapor density (air=1) N/E Rel. evap. velocity N/E
Air reactive N/A Water reactive No
Log Pow: N/E
3/6

OTHER INFORMATION
N/A = Not applicable.
N/E = Not established.
10. STABILITY AND REACTIVITY

STABILITY
Stable under normal conditions.
MATERIALS TO AVOID
No hazardous reactions known.
HAZARDOUS DECOMPOSITION PRODUCTS
No decomposition if stored and used as directed.
High temperatures generate:Carbon monoxide, carbon dioxide., nitrogen compounds
11. TOXICOLOGICAL INFORMATION

OTHER TOX. INFORMATION
LD50/oral/rat =60 mg/kg (Phenyl Mercury Ester)
LD50/oral/rat =5000 mg/kg (Diethyltoluenediamine)
INHALATION
Normally low inhalation risk.May cause sensitization of susceptible persons by inhalation of aerosol or dust.Inhalation
may cause severe irritation and, dependent on dose, chemical burns.Inhalation of diisocyanate vapours in significant
doses may cause coughing , asthmatic wheezing and shortness of breath.Prolonged inhalation of high concentrations
may damage respiratory organs.
SKIN CONTACT
Irritates and defats the skin causing dryness, cracking and dermatitis.
EYE CONTACT
Vapour or splashes may cause eye damage, impaired vision or blindness.
INGESTION
Not regarded as a potential route of exposure.
CANCER
Carcinogenic properties are not known.
12. ECOLOGICAL INFORMATION

MOBILITY
Sinks in water.
BREAKDOWN
no data available
ACCUMULATION
no data available
ECOTOXITY
Expected to be toxic to aquatic organisms.
no data available
13. DISPOSAL
S-35 This material and its container must be disposed of in a safe way.S-35 In accordance with local and national
4/6

regulations.
14. TRANSPORT INFORMATION
GENERAL
Goods classified for transport : NO
PROPER SHIPPING NAME : Not regulated.
Flash point : >150 ºC
Label information:
ADR
Class : Not regulated.
IMDG-CODE
IATA-DGR
US DOT
15. REGULATORY INFORMATION

Classification
Harmful
COMPOSITION
Phenyl Mercury Ester (1 - 4 %), Diethyltoluenediamine (5 - 10 %)
R-PHRASES
R-21/22 Harmful in contact with skin and if swallowed.
S-PHRASES
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-28 S-28 After contact with skin, wash immediately with plenty of Water.
S-36/37 Wear suitable protective clothing and gloves.
REFERENCES
Classified according to European directive on classification of dangerous preparations 90/492/EEC.
OTHER INFORMATION
Also read the MSDS on the Base !
16. OTHER INFORMATION
ISSUED: 05/Dec/1999
INFORMATION SOURCES
The safety data sheet has been prepared on the basis of information given by the manufacturer.
5/6

VENDOR NOTES
The safety data sheet fulfills requirements specified in Directive 93/112/EEC.The safety data sheet has been prepared
on the basis of information given by our suppliers and our present knowledge.Information given is intented to present
guidelines for safe handling, use, processing, storage, transport, disposal and discharge; it is not intended to be a
guarantee or quality specification.The intent of this safety data sheet is to give a description of the product with regard to
safe storage, handling and use.Information given applies only to the product itself, and not in combination with other
products or in any processed form, unless this is specified in the text.We believe that all information in this safety data
sheet (which replaces all previous versions) was correct at the date of issue.It is the responsibility of the recipient of
this safety data sheet to ensure that information given here is read and understood by all who use, handle, dispose of or
in any way come in contact with the product.
6/6

RUBBERREBUILDACT

Uploaded by

Copyright:

Available Formats

RUBBERREBUILDACT

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

RUBBERREBUILDACT

Uploaded by

Copyright:

Available Formats

MATERIAL SAFETY DATA SHEET

Last changed: 05/Dec/1999 Internal no.: :rev LdV-1 Replaces date:

Unitor Rubbergrade 6 Rebuild Activator

TRADE NAME Unitor Rubbergrade 6 Rebuild Activator

PRODUCT-NO 103 606012 (complete set)

Producer/Importer UNITOR ASA

Int. +1 703 5273887

Unitor Rubbergrade 6 Rebuild Activator

5. FIRE FIGHTING MEASURES

6. ACCIDENTAL RELEASE MEASURES

7. HANDLING AND STORAGE

Unitor Rubbergrade 6 Rebuild Activator

8. EXPOSURE CONTROL AND PERSONAL PROTECTION

Ingredients name CAS-no TLV value TLV Year

9. PHYSICAL AND CHEMICAL PROPERTIES

Unitor Rubbergrade 6 Rebuild Activator

10. STABILITY AND REACTIVITY

11. TOXICOLOGICAL INFORMATION

12. ECOLOGICAL INFORMATION

Unitor Rubbergrade 6 Rebuild Activator

14. TRANSPORT INFORMATION

15. REGULATORY INFORMATION

16. OTHER INFORMATION

Unitor Rubbergrade 6 Rebuild Activator

You might also like