International Journal of Advances in Applied Sciences (IJAAS)

Vol. 12, No. 2, June 2023, pp. 171~178

ISSN: 2252-8814, DOI: 10.11591/ijaas.v12.i2.pp171-178  171

Internet of things time saving and management system for bus

passengers

Ali Abdulaziz Alawad, Muhammad Tajammal Chughtai, Majid Faleh Alanezi

Department of Electrical Engineering, University of Hail, Hail, Saudi Arabia

Article Info ABSTRACT

Article history: This article presents a novel type of mobile phone application approach
using the wireless fidelity (WiFi) system. Which is capable of facilitating the
Received Oct 11, 2022 public transport user and its drivers efficiently. The application support
Revised Mar 20, 2023 passengers when there are scenarios where commuters face problems while
Accepted Apr 7, 2023 using public transport. If users get bus information beforehand, such as bus
location and arrival time, the number of passengers in the public
transportation system. This application has been developed for the Android
Keywords: operating system. The application includes bus details like real-time bus
location, bus arrival time, bus routes, bus stops, bus numbers, and so on.
Bus After the trip is booked, users' devices allow real-time geolocation to be
Internet of things shared in the application, helping the bus driver decide to stop at one stop or
Public transportation move to another when there are no users.
Software
This is an open access article under the CC BY-SA license.

Corresponding Author:
Majid Faleh Alanezi
Department of Electrical Engineering, University of Hail
Hail 2440, Saudi Arabia
Email: [email protected]

1. INTRODUCTION
Public transport is being observed as having the most significant influx of users, this is mainly due
to the reason that it is user-friendly, efficient, cost-effective, and helps people and goods to move from one
place to another [1]. The range of modes of transportation can provide basic safety demands, health,
harmony, ease, fiscal growth, and social growth to groups of people in a diverse fashion. A few modes are
extra effective than the rest. However, all modes contribute towards increased agility and approach to a range
of services, resources, markets, and opportunities [2]. It has substantial benefits, such as saving time,
lowering the cost of energy and parking, and chances for more social contacts, reducing congestion and
emissions, reducing stress, and conservation of energy, this also supports a healthier future [3] for coming
generations. The reliance on personal automobiles is linked heavily to the non-availability of proper
infrastructures and tactics rather than to sharing other modes of transportation [4]. Crowding in transport,
accidents, and pollution are becoming more severe day by day, due to an extraordinary rise in various
commuting systems. These commuting means to cover vehicular, freight, public transport, and even
pedestrian traffic.
To find solutions to such issues, intelligent transport systems (ITSs) have been grown up. The
system is capable to integrate a wide range of systems for a commute. This includes sensing data,
dissemination of information, and communication data relevant to traffic [5]. Often the frequency and
location of a certain route bus, its schedules, recognized routes, its commencing points, and its potential to
carry some travelers are not available to passengers, this may deprive the users of a particular service [6].
Whereas, the contributing authors of this article pay attention to comparing the architectures which are based
on the internet of things (IoT) to serve to monitor the bus and its management system. This consists of radio

Journal homepage: http://ijaas.iaescore.com

172  ISSN: 2252-8814

frequency identification (RFID), global positioning system (GPS), general packet radio service (GPRS), and
geographic information system (GIS). Besides the transportation systems mentioned here, a range of enabling
technical approaches have also been used for tracking animals, objects, and humans. Likewise, these systems
are widely known as real-time location systems (RTLS) [7]. RTLS is based upon software and hardware,
which can monitor and discretely determine/provide the online position of an asset or resources to the user
accurately. The technology which works without physical wires is being used to communicate between
software writers devised in a range of forms, including RFID, Bluetooth, wireless fidelity (WiFi), ZigBee
communication, ultra-wideband (UWB), infrared, and global system for mobile communication (GSM). All
these technologies are considered for a special type of application and possess their advantages and
disadvantages [8].
IoT technology has the potential for usage in transport systems shortly. By the year 2025, it is
estimated that a mark of 75 billion device connections to the internet will be achieved [9]. The components
which are responsible for data-collection help to gather all useful information about the transportation
system, e.g. parameters such as the flow of traffic at a particular location of the road network, average time to
travel for a particular section of a road network, and number of travelers who are boarding onto a commuting
line [10]. The ITS is announced to take all the benefits of prevailing public commuting infrastructure and to
augment its efficiency, efficacy, and allurement. The ITS is considered an application to support advanced
systems in communication, information data processing, control, and related electronics technologies which
improve the commutation system. This extends its help in terms of saving precious lives, time, and funds [11]
and provides sources that are responsible for enriched data, with an increased resolution, and thereof,
dissemination of methods for information. Therefore, give access to higher levels of real-time detailed
management opportunities [12].
In this connection, another example may be quoted as the forecast of coach arrival time at a
particular point which depends upon the information which is transmitted by the coach drivers, through
mobile phone signals across different cell tower areas [13]. The core of bus arrival time (BAT) prediction is
the model construction, which includes two key issues; one is impact factors selection, while the other is
defining the prediction model. Predictions by the BAT system are considered to be closely about several
features which are supposed to be about bus stops. These features to be considered are well timed, traveler’s
location, and lane number, and are considered as the basic specs for the BAT prediction.
Han et al. [14] describe GPS and GIS technologies are considered as new sources of collecting data
about transportation, more precisely travel data. The GPS data can provide real-time spatial and temporal
information. It shows travel behavior, including distance, travel speed, trip time, and other information in
digital formats all at once [15]. Moreover, it is believed that the GIS which is usually based upon GPS
calibration of data method appears to be an aid for preprocessing of raw data set hence to reach hands onto
vehicle’s coordinates about its location. Castro et al. [16] proposed a new type of map that is oriented to the
road network and match method. Subaweh and Wibowo [17] presented a method that identified a method to
develop a link to the land. This was achieved by connecting a GPS and hence displaying the data into an
Android-based application system. In their article, they explained the method of using GPS coordinates data
values and the level of usage for application program linkage which in turn builds an interface between the
android and IoT. The application then displays data coordinates on the designated maps.
Singla and Bhatia [18] suggested another system for bus movement tracking as a result of using
GPS. In this article the author dominantly concentrated on retrieving the bus movement location data
coordinates as a result of using the GPS. These data coordinates are transmitted using the GPRS in the GSM
networks. This is attained through short message service (SMS), RFID-based control units or directly using
radio frequency (RF) receivers which are installed at various bus stops. While relying on the speed pattern of
the bus, the arrival time at a particular point may be computed by the use of K-means and artificial neural
networks (ANN) algorithms. This data information which is related to the bus can also be collected by the
use of a smart TV set which may be mounted on the bus stops, or SMS or web application and Android
systems. The use of these algorithms facilitates the accuracy in the calculation of the arrival time of the bus in
an extra reliable manner. The suggested application functioned efficiently subject to the quality of the
internet signals. There is no doubt that GIS oriented method is based on a foundation of map matching. There
always exists room for improvement in any system. Researchers believe that map-matching performance is
influenced by a series of factors, such as heading information [19], and time information [20]. A total of
2,667,837 mobile applications were published for the Android operating system, however, the maps and
navigation category contains 40,728 published applications, which ranks it 18 th. This is an indicator of the
need for a graphical representation of the main points of interest on the map. Intelligent public transport
system (IPTS) aims to control public transport networks in favor of commuters.
The GIS-oriented method is the foundation of map matching, this facilitates users with an up-to-date
piece of information about the trips and terms of usage [21]. Whereas, the relative Google Maps application

Int J Adv Appl Sci, Vol. 12, No. 2, June 2023: 171-178
Int J Adv Appl Sci ISSN: 2252-8814  173

remains standing out having downloads by achieving a mark of over 5 billion [22]. The global share of
Android has reached between 85–87%, this is due to the reason that it is an open-source, however, in case of
a problem, the solution may be gained with the help of carrying analysis of the source code [23]. The main
concept by Harini et al. [24] needs to be satisfied through the demand of citizens for public transport services,
this too is helpful in conjunction with emerging technology named IoT. They also tried to redress the drawbacks
which are coexisting with the existing transportation system. The suggested system facilitates a couple of
outclass contributions to urban territories with the contribution of providing navigation due to tracking of
journey progress about individuals and the overcrowded route. This is done by recommending of the system
which is capable of suggesting the best alternative route. This type of system is considered as highly efficient
for the territories in urban areas covered by local transport system. The project used web applications and
servers to store data which is then displayed as maps to users on android operating system [25].

2. RESEARCH METHOD
Development of an application that is capable of providing many services to help improve the
quality of public transportation by making use of many technologies. The user can book a ticket and pay the
fare through the application. The application will provide the immediate location of the bus route which is
required by the user. Therefore, the passenger gets ready to ride on the bus.
The application will also help passengers to avoid congestion problems, this congestion may be due
to other buses in the vicinity of the desired bus. The application will be a convenient option for the user and
driver. The application may become a preferred method of using transportation at a comfortable level and
help reduce the number of private vehicle users on the road, thus helping to improve the environment.
Figure 1, shows a general flow chart for the overall suggested software system.

Figure 1. Application workup flow chart

3. SYSTEM MODULES
3.1. Passenger’s module
The passengers will download and install the application and open it for the first time; welcomes the
user and displays the introduction page which describes the general introduction and necessary guide to use
the module as shown in Figure 2. The user will be asked to register (registration is required to complete the

Internet of things time saving and management system for bus passengers (Ali Abdulaziz Alawad)
174  ISSN: 2252-8814

application) as shown in Figure 3, and he will be asked to enter necessary data, after which the user will
receive a verification code via an SMS text as shown in Figure 4. Next, an interface will appear which will be
consisting of Google Maps, where the user will be able to choose his destination and submit his request as
shown in Figure 5. There is also a list of dates and times that the user can choose and schedule his future trips
as shown in Figure 6. Afterward, an interface page will also appear consisting of the driver and bus data and
the remaining time for the bus to arrive at a particular stop and the user will also be shown with remaining
arrival time and the route of the desired bus, see Figure 7. At the end of the trip, the user will be presented
with the driving and service notes screen as shown in Figure 8.

Figure 2. The instruction screen is Figure 3. Passenger login screen Figure 4. Verification code
shown to the user generation screen

Figure 5. Available buses screen Figure 6. Schedule for the next ride screen

Int J Adv Appl Sci, Vol. 12, No. 2, June 2023: 171-178
Int J Adv Appl Sci ISSN: 2252-8814  175

Figure 7. Bus progress page Figure 8. Application feedback page

A sample of 10 people was chosen to function test the performance of the app under consideration.
The functional tests and development of the connection between the passenger and the database were
checked. The tests met the functional requirements as perceived while developing the application. The
functional sequence of the application is shown in Table 1.

Table 1. Test for the sequence for the function test

Functional requirements Functionality test
The system allows user registration and login. The user logs in to the user unit.
The system will display the flight schedule in the application. The user chooses his trip or schedules his trips.
The system will display options (payment, driver data, and number of people) The user can view these details by clicking on
and the time of the bus's arrival. it.
During the trip, the system will display the itinerary, number of stops, and The user can follow the journey and stops.
arrival time.
The system will display a feedback screen for users. The user can record driving and service notes.

3.2. Driver’s module

The bus driver’s module has a special option for bus drivers. The driver will see instructions for
using the application. This module will help the driver of the vehicle to get acquainted with the ground
situation such as whether a passenger is waiting to get on board the bus and how far the passenger is from his
bus. The application will also provide necessary statistics about the bus seating and the passengers on the
wait. After registration, a number list of the people on the bus and the destination of each person will appear.
The same sample size as used for the passenger module was used here. Functional tests and
development of the connection between the driver’s module and database were checked here as well. The
tests met the functional requirements as predicted during the development of this application. The testing
sequence of the driver’s module is presented in Table 2. Figure 9 shows the driver login page of the
application, Figure 10 shows the driver's main page on the application, and Figure 11 shows the feedback
page on the application.

Table 2. Functional tests sequence

Functional requirements Functionality test
The system allows driver registration and login. The driver registers the login in the driver module.
The system displays the users' location in real-time. The driver checks users' location and tracking.
The system displays user data. The driver can register his attendance through the
application.
The system displays the itinerary and the stop points. The driver can know the route and the time of arrival.
The system displays a feedback screen for the driver to add any The driver can take notes.
comments.
Internet of things time saving and management system for bus passengers (Ali Abdulaziz Alawad)
176  ISSN: 2252-8814

Figure 9. Driver login page Figure 10. Driver’s main page

Figure 11. Feedback page

4. CONCLUSION
It has been a great deal of research work to obtain the requirements and needs of public
transportation. Networks are a vital feature to improve urban mobility and improve travel information and
provide convenience to the public. Many widely distributed tools show their usefulness to passengers and bus
drivers via mobile phones and interfaces. The goal is to improve the satisfaction and confidence of the public
with public transport and increase its usage. It also helps to provide quality service and contributes to
improve the environmental parameters.

Int J Adv Appl Sci, Vol. 12, No. 2, June 2023: 171-178
Int J Adv Appl Sci ISSN: 2252-8814  177

ACKNOWLEDGEMENTS
The authors are thankful to the University of Hail, KSA to provide financial and technical support.
This work was carried out under Grant No. GR-22107 provided by the University of Hail, Saudi Arabia.

REFERENCES
[1] S. Elkosantini and S. Darmoul, “Intelligent public transportation systems: a review of architectures and enabling technologies,” in
2013 International Conference on Advanced Logistics and Transport, May 2013, pp. 233–238, doi:
10.1109/ICAdLT.2013.6568465.
[2] R. Hickman, P. Hall, and D. Banister, “Planning more for sustainable mobility,” J. Transp. Geogr., vol. 33, pp. 210–219, Dec.
2013, doi: 10.1016/j.jtrangeo.2013.07.004.
[3] A. Dehghanmongabadi and Ş. Hoşkara, “Challenges of promoting sustainable mobility on university campuses: the case of
Eastern Mediterranean University,” Sustainability, vol. 10, no. 12, p. 4842, Dec. 2018, doi: 10.3390/su10124842.
[4] T. Limanond, T. Butsingkorn, and C. Chermkhunthod, “Travel behavior of university students who live on campus: a case study
of a rural university in Asia,” Transp. Policy, vol. 18, no. 1, pp. 163–171, Jan. 2011, doi: 10.1016/j.tranpol.2010.07.006.
[5] A. Sumalee and H. W. Ho, “Smarter and more connected: Future intelligent transportation system,” IATSS Res., vol. 42, no. 2, pp.
67–71, Jul. 2018, doi: 10.1016/j.iatssr.2018.05.005.
[6] C. de la Cruz, A. Pacheco, I. Robles, A. Duran, and E. Flores, “Smart transportation system for public universities,” Int. J. Inf.
Technol., vol. 13, no. 4, pp. 1643–1647, Aug. 2021, doi: 10.1007/s41870-021-00708-9.
[7] P. I. Hagouel and I. G. Karafyllidis, “Nanoelectronic graphene devices,” 2017.
[8] F. Halawa, H. Dauod, I. G. Lee, Y. Li, S. W. Yoon, and S. H. Chung, “Introduction of a real time location system to enhance the
warehouse safety and operational efficiency,” Int. J. Prod. Econ., vol. 224, p. 107541, Jun. 2020, doi: 10.1016/j.ijpe.2019.107541.
[9] M. W. Raad, M. Deriche, and T. Sheltami, “An IoT-based school bus and vehicle tracking system using RFID technology and
mobile data networks,” Arab. J. Sci. Eng., vol. 46, no. 4, pp. 3087–3097, Apr. 2021, doi: 10.1007/s13369-020-05111-3.
[10] F. Soriguera and F. Robusté, “Estimation of traffic stream space mean speed from time aggregations of double loop detector
data,” Transp. Res. Part C Emerg. Technol., vol. 19, no. 1, pp. 115–129, Feb. 2011, doi: 10.1016/j.trc.2010.04.004.
[11] L. Koon, “California and oregon advanced transportation systems (COATS) Phase 7,” Bozeman, 2020. [Online]. Available:
https://dot.ca.gov/-/media/dot-media/programs/research-innovation-system-information/documents/final-reports/ca19-1754-
finalreport-a11y.pdf.
[12] L. Fu and X. Yang, “Design and implementation of bus–holding control strategies with real-time information,” Transp. Res. Rec.
J. Transp. Res. Board, vol. 1791, no. 1, pp. 6–12, Jan. 2002, doi: 10.3141/1791-02.
[13] Z. Zhang, D. Chu, X. Chen, and T. Moscibroda, “SwordFight: enabling a new class of phone-to-phone action games on
commodity phones,” in Proceedings of the 10th international conference on Mobile systems, applications, and services, Jun.
2012, pp. 1–14, doi: 10.1145/2307636.2307638.
[14] Q. Han, K. Liu, L. Zeng, G. He, L. Ye, and F. Li, “A bus arrival time prediction method based on position calibration and
LSTM,” IEEE Access, vol. 8, pp. 42372–42383, 2020, doi: 10.1109/ACCESS.2020.2976574.
[15] Z. Karami and R. Kashef, “Smart transportation planning: Data, models, and algorithms,” Transp. Eng., vol. 2, p. 100013, Dec.
2020, doi: 10.1016/j.treng.2020.100013.
[16] P. S. Castro, D. Zhang, and S. Li, “Urban traffic modelling and prediction using large scale taxi GPS traces,” in Lecture Notes in
Computer Science book series (LNISA,volume 7319), Springer Berlin Heidelberg, 2012, pp. 57–72.
[17] M. B. Subaweh and E. P. Wibowo, “Implementation of pixel based adaptive segmenter method for tracking and counting vehicles
in visual surveillance,” in 2016 International Conference on Informatics and Computing (ICIC), 2016, pp. 1–5, doi:
10.1109/IAC.2016.7905679.
[18] L. Singla and P. Bhatia, “GPS based bus tracking system,” in 2015 International Conference on Computer, Communication and
Control (IC4), Sep. 2015, pp. 1–6, doi: 10.1109/IC4.2015.7375712.
[19] W. Teng and Y. Wang, “Real-time map matching: a new algorithm integrating spatio-temporal proximity and improved weighted
circle,” Open Geosci., vol. 11, no. 1, pp. 288–297, Jul. 2019, doi: 10.1515/geo-2019-0023.
[20] C. Chen, Y. Ding, X. Xie, S. Zhang, Z. Wang, and L. Feng, “Trajcompressor: an online map-matching-based trajectory
compression framework leveraging vehicle heading direction and change,” IEEE Trans. Intell. Transp. Syst., vol. 21, no. 5, pp.
2012–2028, May 2020, doi: 10.1109/TITS.2019.2910591.
[21] AppBrain, “Android and Google Play statistics,” AppBrain, 2023. https://www.appbrain.com/stats (accessed Aug. 27, 2022).
[22] Google LLC, “Google maps,” AppBrain, 2023. https://www.appbrain.com/app/maps-navigate-
explore/com.google.android.apps.maps (accessed Sep. 12, 2022).
[23] J. R. Lequerica, Desarrollo de aplicaciones para Android, 2015th-Spani ed. ANAYA MULTIMEDIA, 2014.
[24] B. K. Harini, A. Parkavi, M. Supriya, B. C. Kruthika, and K. M. Navya, “Increasing efficient usage of real-time public
transportation using IoT, cloud and customized mobile app,” SN Comput. Sci., vol. 1, no. 3, p. 159, May 2020, doi:
10.1007/s42979-020-00161-8.
[25] M. Y. M. Ibrahim and L. Audah, “Real-time bus location monitoring using Arduino,” in AIP Conference Proceedings, 2017, p.
020016, doi: 10.1063/1.5002034.

Internet of things time saving and management system for bus passengers (Ali Abdulaziz Alawad)
178  ISSN: 2252-8814

BIOGRAPHIES OF AUTHORS

Ali Abdulaziz Alawad He is a master's student in communication engineering at

the University of Hail, Saudi Arabia. He got his bachelor's in the University of Hail in 2018.
He is interested in a wireless locating system. He can be contacted at email:
[email protected].

Muhammad Tajammal Chughtai Dr. Chughtai earned his Ph.D. degree in 1995
from the University of Manchester, Manchester, England. He served the same university twice
as Research Associate and as a Project Officer. Apart from this he also served at a range of
universities internationally in countries of Malaysia and Pakistan. At present, he is serving at
the University of Hail, Hail, Saudi Arabia. He possesses a wide range of teaching and research
experience in the fields such as electronics, laser, technical textiles, and instrumentation. He
has served as Assistant Dean, Head of Department, with responsibilities to procurement,
faculty hiring, refereeing research papers, and quality assurance. He is a Senior Member of
IEEE (USA), a full member of IET (London), and a lifetime Professional Engineer (PE) status
Pakistan Engineering Council. He can be contacted at email: [email protected].

Majid Faleh Al Enezi He is a master's student in communication engineering at

the University of Hail, Saudi Arabia. He got his bachelor's in the University of Hail in 2016.
He is interested in a wireless locating system. He can be contacted at email:
[email protected].

Int J Adv Appl Sci, Vol. 12, No. 2, June 2023: 171-178