Na2xsy Aluminium Conductor Xlpe PVC Cable 1830 36 KV
Na2xsy Aluminium Conductor Xlpe PVC Cable 1830 36 KV
Na2xsy Aluminium Conductor Xlpe PVC Cable 1830 36 KV
CONSTRUCTION The electrical and dimensional properties of this product are measured by the
Technical and Quality Assurance department at the Eland Cables laboratory. Cable
Conductor performance in respect of conductor resistance, construction quality (workmanship),
Class 2 stranded aluminium conductor dimensional consistency, and other parameters are verified to published standards
and approved product drawings. Conformance to RoHS (Restriction of the use of
Inner Semi-Conductive Layer Hazardous Substances) is determined and confirmed.
Semi-conductive material
Insulation CHARACTERISTICS
XLPE (Cross-Linked Polyethylene)
Voltage Rating (Uo/U)(Um)
18/30 (36)kV
Outer Semi-Conductive Layer
Semi-conductive material
Test Voltage
63kV
Screen
Copper wires
Temperature Rating
Fixed: -20°C to +70°C
Sheath
Flexed: -5°C to +70°C
PVC (Polyvinyl Chloride)
Short Circuit Temperature
+250°C
Sheath Colour
Red
ISSUE NO 01-03 -2014
DIMENSIONS
ELAND PART NO. NO. OF NOMINAL CROSS MAXIMUM OVERALL NOMINAL WEIGHT
CORES SECTIONAL AREA DIAMETER kg/km
mm
Conductor Copper Wire Screen
mm² mm²
ELECTRICAL CHARACTERISTICS
ELAND PART NO. NO. OF NOMINAL CROSS CURRENT CARRYING CAPACITY
CORES SECTIONAL AREA
In Trefoil
The information contained within this datasheet is for guidance only and is subject to change without notice or liability. All the information is provided in good faith and is believed to be correct at the time of
publication. When selecting cable accessories, please note that actual cable dimensions may vary due to manufacturing tolerances.